LPC2292FET144/01 - 60MHz ARM7 MCU, 256KB Flash | NXP
MPN: LPC2292FET144/01 ✓ Hoạt độngLPC2292FET144/01 Tóm tắt
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The LPC2292 belongs to the ARM7 embedded-control hierarchy: ARM7TDMI-S CPU core, 32-bit microcontroller, embedded system controller, and general-purpose semiconductor. Its bus-oriented architecture and extensive peripheral set allow one device to supervise communications, analog measurement, and external storage or memory-intensive operations.
The LPC2292FET144/01 combines a 128-bit-wide memory interface with a unique accelerator architecture that enables 32-bit code execution at the maximum clock rate. Its 256 KB ISP/IAP flash supports in-system and in-application programming, while real-time emulation and embedded trace features assist firmware development and diagnostics. Two CAN controllers are useful for industrial networking, vehicle electronics, and embedded systems requiring reliable multi-controller communication.
The 10-bit ADC provides analog measurement capability without requiring a separate converter, and the external memory interface expands the design options available when an application needs additional memory or peripheral devices. These interfaces complement the 60 MHz processor and make the LPC2292 suitable for control systems that combine communications, data acquisition, and external signal processing in one compact package.
Typical uses include industrial controllers, CAN-connected equipment, building automation, embedded gateways, and data-acquisition systems. The 144-TFBGA package supports compact designs but requires careful PCB layout and inspection because its fine-pitch ball grid has limited soldering visibility. Firmware development can use the processor's real-time emulation and embedded trace capabilities to reduce the complexity of board bring-up and runtime analysis.
Careful power, decoupling, clock, and memory-interface design is essential for reliable operation. Place the required supply capacitors close to their associated pins, route high-current and sensitive signals appropriately, and follow the NXP datasheet's recommended PCB and pin-configuration guidance. The /00 and /01 device variants use an identical pin configuration, which simplifies board-level planning across those revisions.
This product page consolidates the principal NXP device characteristics, practical integration guidance, exact-source availability information, and a focused comparison with compatible LPC2200-family devices. It also highlights where revision-specific ordering codes and detailed package pin descriptions must be checked in the manufacturer datasheet before a new PCB is released for production.
Bộ thay thế dễ dàng lắp đặt cho LPC2292FET144/01 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
LPC2292FET144/00
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
LPC2292FET144
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
LPC2294FET144
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
LPC2294FET144/00
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
LPC2294FET144/01
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
LPC2292FET144/01 Tỷ lệ tối đa & tính chất điện
| Product Type | 16/32-bit ARM microcontroller |
| CPU Core | Arm7TDMI-S |
| Tần số xung maksimum | 60 MHz |
| Embedded Flash Memory | 256 KB |
| Flash Organization | 256K x 8 bits |
| Program Memory Type | ISP/IAP flash |
| SRAM | 16 KB |
| CAN Controllers | 2 |
| ADC Resolution | 10 bits |
| External Memory Interface | 1 interface |
| Memory Interface Width | 128 bits |
| Operating Voltage | 1.65 V to 3.6 V |
| Hộp | 144-TFBGA, 12 mm x 12 mm |
| Kiểu lắp đặt | Surface mount |
| Development Support | Real-time emulation and embedded trace |
Hướng dẫn cấu hình chân LPC2292FET144/01 144-tfbga, 12 mm x 12 mm
Cấu hình chân cho LPC2292FET144/01 (144-tfbga, 12 mm x 12 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho LPC2292FET144/01.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
LPC2292FET144/01 phù hợp cho 6 Áp dụngs: CAN-Connected Industrial Controller, Building Automation and HVAC Equipment, Industrial Data-Acquisition System, Embedded Communications Gateway, Motor and Machinery Control, Programmable Test and Measurement Front End.
CAN-Connected Industrial Controller
The LPC2292FET144/01 fits an industrial controller because it combines two CAN controllers with a 60 MHz Arm7TDMI-S core and 256 KB of ISP/IAP flash. The controller can manage node communication, supervisory logic, and local I/O while retaining field-update capability through in-system or in-application programming. Its 16 KB SRAM provides working memory for protocol stacks and control tasks without requiring external RAM for moderate workloads. The 144-TFBGA package also keeps the controller compact when board area is constrained. External CAN transceivers, bus termination, surge protection, and isolation remain separate board-level requirements. Firmware should be validated for the exact LPC2292 memory map and the selected CAN clock configuration before production release.
Được đề xuất
Building Automation and HVAC Equipment
The LPC2292FET144/01 is appropriate for building-automation equipment that must coordinate sensors, actuators, and networked controllers. Its two CAN controllers can support distinct communication channels or redundant network segmentation, while the 10-bit ADC accepts basic analog measurements such as temperature, level, or pressure signals. At 60 MHz, the Arm7TDMI-S processor can execute control loops alongside communication tasks, and 256 KB of ISP/IAP flash supports local scheduling, diagnostics, and firmware maintenance. Use the external memory interface if a product line shares the controller platform with larger peripherals or data-storage requirements. Isolation, filtering, and protection must be engineered around the building wiring environment rather than assumed to be integrated into the microcontroller.
Được đề xuất
Industrial Data-Acquisition System
The LPC2292FET144/01 can serve as the supervisory processor in a compact data-acquisition system. Its 10-bit ADC provides an integrated conversion function for slow or moderate-resolution analog measurements, while the external memory interface permits connection to higher-resolution converters, data buffers, or storage devices. The 128-bit-wide memory architecture and accelerator design support efficient 32-bit execution at the 60 MHz maximum clock rate, and the 256 KB ISP/IAP flash can hold calibration tables, buffering logic, and communication routines. For high-noise environments, use careful grounding, filtering, and isolation at the analog interface. The ADC's specified accuracy and acquisition characteristics should be checked against the required sensor precision before finalizing the signal chain.
Được đề xuất
Embedded Communications Gateway
The LPC2292FET144/01 fits a communications gateway that must mediate between local serial equipment and a CAN-based network. Two integrated CAN controllers reduce the need for external protocol hardware, while the 60 MHz processor can manage protocol conversion, buffer management, and supervisory functions. Its 256 KB flash provides room for gateway configuration and firmware, and ISP/IAP support simplifies field upgrades in deployed equipment. The external memory interface can extend the design with larger buffers or dedicated storage when required. Board designers should allocate the pins for Ethernet, serial, or other gateway interfaces according to the exact datasheet table, while providing appropriate transceiver, protection, and isolation hardware for each external communication medium.
Được đề xuất
Motor and Machinery Control
The LPC2292FET144/01 can coordinate low- and medium-complexity machinery functions that require networking, analog sensing, and deterministic embedded control. The 60 MHz Arm7TDMI-S core provides computational headroom for digital commutation or supervisory loops, while the two CAN controllers enable communication with drives, remote sensors, or service diagnostics. Its 10-bit ADC can monitor feedback from basic sensors, and 256 KB of ISP/IAP flash accommodates control tables and updateable firmware. Power-stage drivers, current sensors, and safety interlocks remain external. Validate timing margins, watchdog behavior, fault handling, and regulator thermal performance because the microcontroller's integrated functions do not replace the power electronics or protection circuitry required for industrial machinery.
Được đề xuất
Programmable Test and Measurement Front End
The LPC2292FET144/01 is suitable for a programmable measurement front end when measurements must be coordinated with external instruments. The processor can control sequencing, calculate corrections, and communicate results through CAN, while the 10-bit ADC handles additional analog channels outside the primary measurement path. Its ISP/IAP flash allows calibration constants and test firmware to be updated in the field, and the external memory interface supports larger buffers, interface converters, or specialized instruments. Use the 144-TFBGA package only on a PCB designed for fine-pitch assembly and adequate thermal relief. For precision measurement, determine whether the ADC resolution and noise performance satisfy the system specification; otherwise, connect a higher-performance converter through the external interface.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho LPC2292FET144/01 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | LPC2292FET144/00 | LPC2292FET144 | LPC2294FET144 | LPC2294FET144/00 | LPC2294FET144/01 |
|---|---|---|---|---|---|---|
| Package | 144-TFBGA (12x12) | 144-TFBGA (12x12) | 144-TFBGA (12x12) | 144-TFBGA (12x12) | 144-TFBGA (12x12) | 144-TFBGA (12x12) |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| CPU Core | Arm7TDMI-S | Arm7TDMI-S | Arm7TDMI-S | Arm7TDMI-S | Arm7TDMI-S | Arm7TDMI-S |
| Maximum Clock Frequency | 60 MHz | 60 MHz | 60 MHz | 60 MHz | 60 MHz | 60 MHz |
| Embedded Flash Memory | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB |
| SRAM | 16 KB | 16 KB | 16 KB | 64 KB | 64 KB | 64 KB |
| CAN Controllers | 2 | 2 | 2 | 2 | 2 | 2 |
| ADC Resolution | 10 bits | 10 bits | 10 bits | 10 bits | 10 bits | 10 bits |
| External Memory Interface | 1 | 1 | 1 | 1 | 1 | 1 |
Bảo phân biệt quan trọng
- Dual integrated CAN controllers support networked embedded control without two external controller devices (vsLPC2292FET144/00)
- The /01 ordering variant retains the exact /00-family pin configuration (vsLPC2292FET144/00)
- LPC2292 memory sizing matches the target application's 16 KB SRAM requirement (vsLPC2294FET144)
- Integrated ISP/IAP flash and development features reduce external programming overhead (vsLPC2292FET144)
Ghi chú thiết kế
Design the PCB land pattern directly from the 144-TFBGA pin configuration in the NXP LPC2292/2294 datasheet. The manufacturer states that /00 and /01 devices use the same pin configuration, which permits a common footprint. Preserve the datasheet-specified ball assignments and maintain assembly-process allowances for a 12 mm by 12 mm fine-pitch BGA. Because solder joints are hidden after reflow, inspect using X-ray or equivalent process-control methods.
Use the supply voltage range of 1.65 V to 3.6 V and the decoupling configuration specified by NXP. Place each required capacitor close to its associated power ball and keep high-current return paths short and continuous. Separate noisy digital return currents from sensitive analog routing where practical, and verify regulator startup, current limits, and sequencing against the complete manufacturer electrical-characteristics table.
Route the 128-bit external memory interface as a controlled-length, point-to-point bus, following the NXP recommendations for topology, trace impedance, and termination. Avoid splitting the bus into long branches and minimize vias and stub traces. The 60 MHz operating rate does not make interface timing automatic; evaluate setup and hold margins in the target system and use the datasheet timing information as the design baseline.
Do not treat LPC2294 as a transparent LPC2292 substitution solely because both use the same 144-TFBGA footprint. LPC2292 has 16 KB of RAM, whereas LPC2294 provides 64 KB, and changing RAM capacity can alter linker placement, startup assumptions, and memory-map interpretation. Likewise, check the exact /00 or /01 suffix before releasing the BOM. The most robust choice is the exact device or a revision specifically approved by the firmware and hardware teams.
Thông tin tuân thủ
The LCSC product listing identifies the device as RoHS, but no formal compliance declaration or separate AEC-Q100, REACH, lead-free, halogen-free, or conflict-minerals status was confirmed for the exact MPN.