Analog Devices

LT1057CJ8 - Dual JFET Precision High-Speed Op Amp | Analog Devices

MPN: LT1057CJ8 ✓ Aktif
450 µV for LT1057 Vdss 8-pin CERDIP Package
MOQ: 1 |

LT1057CJ8 Genel Bakış

The Analog Devices LT1057CJ8 is a matched dual JFET-input operational amplifier in an 8-pin ceramic-DIP package, combining a minimum 14 V/µs slew rate, a minimum 5 MHz gain-bandwidth product, and fast settling to 0.02%. The LT1057 uses the industry-standard 8-pin dual-amplifier configuration and is positioned as a precision, high-speed JFET-input alternative to established bipolar and JFET-input dual op amps. Its ceramic-DIP construction supports applications requiring a through-hole package.

An operational amplifier is an analog signal-conditioning integrated circuit that amplifies the voltage difference between its two inputs while providing high open-loop gain and low output impedance. The JFET-input topology places the LT1057 in the amplifier hierarchy as a precision analog IC with high input impedance and low input bias current. This makes it particularly useful when a low-level sensor or instrumentation signal must be amplified without loading its source.

The LT1057's principal performance features include a typical slew rate of 14 V/µs, a guaranteed minimum of 10 V/µs, a minimum 5 MHz gain-bandwidth product, and fast settling to within 0.02%. Its maximum offset voltage is 450 µV for the LT1057, compared with 180 µV for the closely related LT1058 in the same dual-and-quad JFET-input family. These specifications support accurate, high-frequency signal amplification when component selection and layout are guided by the manufacturer datasheet.

Architecturally, the LT1057 is a matched dual amplifier, meaning that its two channels are designed for closely matched performance. JFET input devices are valued for high input impedance and low input bias current, while the high gain-bandwidth product supports wider closed-loop bandwidth than a conventional precision-only amplifier. The 8-pin configuration supports common industry-standard dual-op-amp layouts and reduces the need for a custom footprint when the exact package matches.

Typical uses include low-level instrumentation, precision signal conditioning, audio and communications circuitry, active filters, and general-purpose high-speed analog amplification. It is also appropriate for laboratory and industrial signal-chain designs that benefit from matched dual channels, such as differential amplifiers, balanced input stages, and dual-channel filters. Package choice, supply voltage, input common-mode range, output swing, and stability requirements must be checked against the datasheet for the selected grade and temperature range.

When laying out an LT1057CJ8 circuit, use a solid ground plane, minimize input-node capacitance, and place input and feedback components close to the associated amplifier pins. Because high-speed devices can amplify unintended feedback paths, keep output and input routing separate and observe the documented compensation recommendations for the required closed-loop gain. Through-hole ceramic-DIP construction is useful for prototyping and legacy-compatible industrial assemblies, but it occupies more board area than a surface-mount dual op amp.

This product page combines the manufacturer's functional description with package identification, key speed, bandwidth, settling, and offset specifications, practical design guidance, and qualified cross-reference options. It also distinguishes the dual LT1057 from the related quad LT1058 and evaluates the manufacturer's identified upgrades over LF412A and OP-215 dual JFET-input amplifier designs.

Drop-in alternatifler için LT1057CJ8 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu ürüne yer değiştirme seçenekleri mevcut değil.

Alternatifleri Talep Edin

LT1057CJ8 Maksimum Değerlendirmeler & Elektriksel Özellikler

Amplifier Type Matched dual JFET-input operational amplifier
Number of Channels 2 channels
Typical Slew Rate 14 V/µs
Minimum Slew Rate 10 V/µs
Minimum Gain-Bandwidth Product 5 MHz
Settling Accuracy 0.02%
Maximum Offset Voltage 450 µV for LT1057
LT1058 Maximum Offset Voltage 180 µV
Input Transistor Type JFET
Paket 8-pin CERDIP
Pin Sayısı 8 pins
Montaj Türü Through-hole
Temperature Grade Commercial

LT1057CJ8 8-pin cerdip Pin Yapısı Kılavuzu

LT1057CJ8 (8-pin cerdip paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.

8-pin cerdip paket pin çizelgesi için LT1057CJ8

Ayrıntılı pin çıkış verisi mevcut değil: LT1057CJ8.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

LT1057CJ8 için uygundur 6 uygulamas: Precision Instrumentation Amplification, Active Filter and Frequency Response Design, Audio and Communications Signal Conditioning, Data Acquisition Front End, Industrial Control and Process Measurement, Test and Measurement Equipment.

🔧

Precision Instrumentation Amplification

The LT1057CJ8 fits low-level instrumentation front ends that require a JFET input, low input bias current, and more bandwidth than a conventional precision-only dual amplifier. Its 14 V/µs typical slew rate and 5 MHz minimum gain-bandwidth product allow the closed-loop amplifier to follow sensor signals with less slew limitation than slower precision op amps. The two matched channels can also implement balanced differential stages, active filters, or instrumentation blocks. Because the 8-pin ceramic-DIP package is through-hole, it is especially practical for laboratory prototypes, test equipment, and industrial control assemblies where serviceability and socketed construction are useful.

📡

Active Filter and Frequency Response Design

The LT1057CJ8 is appropriate for active filters and closed-loop response stages where the 5 MHz minimum gain-bandwidth product and 0.02% settling target can improve useful signal bandwidth and transient response. Its JFET input helps avoid excessive loading of the preceding filter or sensor node, while the dual configuration supports two poles, a differential filter, or a two-channel equalizer without requiring four separate packages. Component tolerances and op-amp gain-bandwidth behavior remain central to the final response, so simulation should include the selected external resistors and capacitors. The manufacturer family datasheet's typical circuits provide a useful starting point for stable compensation and gain selection.

🌐

Audio and Communications Signal Conditioning

The LT1057CJ8 can be used in audio and communications signal-conditioning paths that benefit from fast settling and a JFET input stage. A typical circuit would amplify a low-level source, apply active equalization, or provide drive into a subsequent conversion stage. The 14 V/µs typical slew rate helps preserve larger-amplitude transients, while the minimum 5 MHz gain-bandwidth product supports closed-loop bandwidth beyond the range of a precision-only op amp. Designers should still check the required supply, output swing, noise, and channel-matching specifications, and should decouple each supply rail close to the device pins.

🖥️

Data Acquisition Front End

The LT1057CJ8 is suitable for conditioning inputs in moderate-speed data-acquisition systems where sensor loading must remain low and amplifier settling affects subsequent sampling accuracy. Its JFET input is well matched to high-impedance sources, while the 5 MHz minimum gain-bandwidth product and fast 0.02% settling target support wider-band signal chains than conventional precision dual op amps. The dual amplifier can implement a differential input stage or two matched channels. For a production acquisition design, compare the exact input common-mode range, offset, bias current, noise, and supply limits before selecting the ceramic-DIP grade and operating temperature range.

🏭

Industrial Control and Process Measurement

The LT1057CJ8 can amplify low-level process signals in industrial measurement equipment where the through-hole ceramic-DIP package supports serviceable assemblies and the JFET input minimizes loading of high-impedance sensors. Its 14 V/µs typical slew rate and 5 MHz minimum gain-bandwidth product provide useful response for dynamic measurements beyond what a slow precision amplifier can handle. The matched dual channels may be used for differential sensing or independent signal paths with similar performance. The final circuit must account for industrial supply tolerances, grounding, common-mode limits, thermal conditions, and the manufacturer's documented stability requirements at the intended closed-loop gain.

🔬

Test and Measurement Equipment

The LT1057CJ8 is a practical choice for test and measurement equipment requiring a matched dual amplifier with fast large-signal response. It can form buffer, gain, active-filter, or driver stages for laboratory instruments while its JFET input preserves the behavior of high-impedance probes or sensors. The 5 MHz minimum gain-bandwidth product supports higher-frequency response than a conventional precision-only op amp, and the dual architecture helps minimize channel-to-channel design variation in paired measurements. Through-hole ceramic-DIP construction is convenient for prototypes, socketed modules, and serviceable instruments. Layout should minimize feedback-loop area and maintain a low-impedance ground reference to preserve the intended settling behavior.

Önerilen Ürünler Özeti

LT1057 Dual JFET-input family member used for instrumentation signal conditioning Kullanıldığı Yer: Precision Instrumentation Amplification, Active Filter and Frequency Response Design, Audio and Communications Signal Conditioning, Data Acquisition Front End, Industrial Control and Process Measurement, Test and Measurement Equipment LT1058 Related quad JFET-input family member for four-channel instrumentation Kullanıldığı Yer: Precision Instrumentation Amplification, Active Filter and Frequency Response Design, Data Acquisition Front End, Industrial Control and Process Measurement, Test and Measurement Equipment LF412A JFET-input dual amplifier design identified by the manufacturer as upgraded by the LT1057 Kullanıldığı Yer: Precision Instrumentation Amplification, Active Filter and Frequency Response Design, Data Acquisition Front End, Test and Measurement Equipment OP-215 Precision dual JFET-input amplifier design identified by the manufacturer as upgraded by the LT1057 Kullanıldığı Yer: Precision Instrumentation Amplification, Audio and Communications Signal Conditioning, Industrial Control and Process Measurement
What is the LT1057CJ8?
The LT1057CJ8 is a matched dual JFET-input operational amplifier in an 8-pin ceramic-DIP package. According to the Analog Devices datasheet, it combines a typical 14 V/µs slew rate, a minimum 5 MHz gain-bandwidth product, fast settling to 0.02%, and a maximum offset voltage of 450 µV. It is intended for precision, high-speed analog signal amplification and follows the industry-standard dual-op-amp configuration.
Where can I download the LT1057CJ8 datasheet PDF?
The official LT1057CJ8 datasheet PDF is available from Analog Devices at the linked manufacturer datasheet for the 1057/1058 family. It contains the LT1057 performance tables, electrical characteristics, pin configuration, application information, and package details needed to evaluate the 8-pin CERDIP variant. Use the manufacturer's PDF for electrical limits and connection details because ordering suffixes can correspond to different commercial or military temperature grades.
Where can I find the LT1057CJ8 pinout?
The LT1057CJ8 pin configuration is shown in the pin-description and package-drawing sections of the Analog Devices LT1057/1058 family datasheet. The device uses an 8-pin dual JFET-input amplifier configuration. Assign PCB connections from that pin table and verify the ceramic-DIP orientation before assembly, including the ceramic package's pin-1 identifier and its relationship to the board footprint.
What are the key specifications of LT1057CJ8 that engineers should know?
The LT1057CJ8 is a dual JFET-input amplifier with a 14 V/µs typical slew rate, 10 V/µs minimum slew rate, 5 MHz minimum gain-bandwidth product, 0.02% settling accuracy, and 450 µV maximum offset voltage. According to the Analog Devices datasheet, it is packaged as an 8-pin CERDIP for through-hole installation. These characteristics make it appropriate for precision signal conditioning, instrumentation, filters, and other high-speed analog stages.
LT1057CJ8 vs LT1058 - which should I choose?
Choose the LT1057CJ8 when the design requires a dual amplifier, while the LT1058 is the corresponding quad-amplifier family member. The manufacturer datasheet identifies the LT1057 with a maximum offset voltage of 450 µV and the LT1058 with 180 µV. Therefore, the LT1057 is the better fit for two-channel designs, while four-channel designs may favor the LT1058 after checking its package, grade, and application requirements.
LT1057 vs LF412A - is the LT1057 better for high-speed instrumentation?
The LT1057 is positioned by Analog Devices as a performance upgrade for systems using the LF412A and OP-215 JFET-input dual op amps. Its published features include a typical 14 V/µs slew rate, a minimum 5 MHz gain-bandwidth product, and fast settling to 0.02%. The LT1057 is therefore the stronger candidate when the additional speed and precision matter, although supply, bias, noise, and package requirements still need direct comparison.
When should I choose the LT1057CJ8 over a generic precision dual op amp?
Choose the LT1057CJ8 when the signal path needs both JFET-input behavior and higher closed-loop speed than a conventional precision-only amplifier. Its 14 V/µs typical slew rate, 5 MHz minimum gain-bandwidth product, and 0.02% settling target provide useful margin in instrumentation and active-filter applications. Select a generic precision dual op amp instead when lower cost, lower power, or rail-to-rail operation dominates the design requirements.
Is the LT1057CJ8 suitable for instrumentation and low-level sensor signals?
The LT1057CJ8 is suitable for instrumentation and low-level signal-conditioning designs when the source impedance, bandwidth, and common-mode range match the amplifier's characteristics. Its JFET input supports high input impedance and low input bias current, while the 5 MHz minimum gain-bandwidth product enables wider signal bandwidth than a precision-only amplifier. Confirm the exact input bias current, common-mode range, and noise requirements against the datasheet before finalizing the front end.
What can replace the LT1057CJ8?
A valid replacement for the LT1057CJ8 must use the same 8-pin through-hole footprint, preserve the dual-amplifier pin arrangement, and meet the required gain-bandwidth, slew-rate, offset, supply, and common-mode specifications. The manufacturer identifies the LF412A and OP-215 as designs upgraded by the LT1057, but those names alone do not establish unconditional drop-in equivalence. Validate the exact MPN, package, grade, and electrical limits before substituting any candidate.
What is the best drop-in replacement for LT1057CJ8?
No drop-in replacement can be named confidently without comparing an exact candidate against the LT1057CJ8 datasheet and pin drawing. A suitable replacement must be a dual JFET-input amplifier in an 8-pin CERDIP-compatible package with compatible lead assignments, at least 5 MHz gain-bandwidth product, at least 10 V/µs slew rate, and offset voltage no worse than 450 µV where precision matters. Use the Request a Quote form for availability and sourcing support.
Can an LF412A or OP-215 replace the LT1057CJ8?
An LF412A or OP-215 may be considered as an upgrade target, but it should not be treated as a guaranteed LT1057CJ8 drop-in replacement without a complete comparison. Analog Devices describes the LT1057 as upgrading systems that use the LF412A and OP-215, which means it is intended to improve their speed and precision. Check package pins, supply range, input bias current, output swing, noise, and stability for the exact proposed replacement.
Is the LT1057CJ8 in stock?
Current inventory should be confirmed through the Request a Quote form on this page rather than assumed from an individual catalog listing. The exact operating grade, ceramic-DIP package, and order quantity determine current stock and lead time. Provide the LT1057CJ8 MPN, target quantity, and delivery requirements when requesting a quote so the procurement response reflects the exact configuration.
What is the price of LT1057CJ8?
Use the Request a Quote form on this page for the current LT1057CJ8 price and quantity schedule. Pricing for a legacy ceramic-DIP operational amplifier can vary with order quantity, sourcing condition, and required traceability. A quote request should include the exact LT1057CJ8 MPN, annual and prototype quantities, acceptable delivery date, and any required manufacturer or inspection documentation.
What is the lead time for LT1057CJ8?
Request the current lead time through the Request a Quote form on this page. Lead time depends on the exact LT1057CJ8 grade, package, order quantity, and supply conditions, so a generic availability statement is not sufficient for planning. Include your production forecast, prototype requirements, and requested delivery date in the inquiry to obtain a schedule matched to the actual demand.
How should the LT1057CJ8 be laid out for stable high-speed operation?
Place feedback and input components close to their associated pins, use a continuous ground plane, and keep output routing away from sensitive input nodes. According to the Analog Devices application guidance, high-speed feedback networks must be laid out carefully because parasitic capacitance can reduce stability and alter settling behavior. Confirm whether additional compensation is required for the intended closed-loop gain and use the family datasheet's recommended circuit for final PCB implementation.

Mühendislik referans verileri: LT1057CJ8 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the LT1057CJ8 when the design needs a matched dual JFET-input amplifier with high speed, fast settling, and a serviceable 8-pin ceramic-DIP package. It is particularly attractive for instrumentation, active filters, data-acquisition front ends, process measurement, and test equipment where a conventional precision-only dual amplifier may limit bandwidth. Select the LT1058 instead when four matched channels are required and the associated quad package is acceptable. Consider the LF412A or OP-215 only when their exact electrical ratings and package are adequate; Analog Devices positions the LT1057 as an upgrade for systems using those amplifier designs. A replacement must still be checked for pin compatibility, supply range, common-mode limits, bias current, offset, output swing, noise, and temperature grade. For low-cost, low-power, or rail-to-rail applications, a modern precision amplifier may be a better fit than this legacy-style high-speed JFET device.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün
Package 8-pin CERDIP
Brand Analog Devices
Amplifier Configuration Dual
Input Type JFET
Typical Slew Rate 14 V/µs
Minimum Slew Rate 10 V/µs
Minimum Gain-Bandwidth Product 5 MHz
Settling Accuracy 0.02%
Maximum Offset Voltage 450 µV for LT1057
Mounting Type Through-hole
Temperature Grade Commercial
Price Tier Request a Quote

Ana Farklılayıcılar

  • Combines JFET input with high-speed performance (karşılaştırma:LF412A)
  • Fast settling suitable for precision signal paths (karşılaştırma:OP-215)
  • Matched dual-channel architecture in an 8-pin ceramic DIP (karşılaştırma:LT1058)

Tasarım Notları

Place input, feedback, and compensation components close to their associated LT1057CJ8 pins, and use a continuous ground plane to minimize parasitic inductance. Keep the output node away from high-impedance input traces because the device's 14 V/µs typical slew rate can expose feedback through unintended coupling. The ceramic-DIP footprint must also include adequate pin-1 clearance for the package identifier and should preserve socket or solder-joint access for serviceable through-hole assemblies.

Evaluate closed-loop stability at every intended gain because parasitic board and socket capacitance can reduce the phase margin of a high-speed amplifier. The manufacturer family datasheet includes typical application circuits and compensation guidance for the LT1057. When using the 8-pin ceramic-DIP in a socket, account for additional contact and lead inductance, and compare the assembled prototype against the simulation with short, symmetric feedback paths and a low-impedance reference plane.

Do not treat the LF412A and OP-215 names mentioned by Analog Devices as unconditional drop-in substitutes for the LT1057CJ8. Confirm the exact package, lead assignments, supply range, common-mode range, input bias current, offset voltage, output swing, and temperature grade. The ceramic-DIP suffix also identifies a commercial grade, so a replacement with the same amplifier family but a different grade or package may require PCB, qualification, or thermal changes.

Use a low-impedance bypass path for each supply connection and verify the selected supply voltage against the exact LT1057CJ8 operating limits. Decoupling capacitors should be placed at the device pins with short ground returns rather than at a remote power-entry point. Check the total power dissipation under the maximum expected load and ambient temperature, particularly in compact legacy-style assemblies where ceramic-DIP airflow may be limited.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The commercial-grade ceramic-DIP LT1057CJ8 is not presented as an automotive-qualified part. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not identified in the cited product information.

Veri doğrulanma tarihi: 2026-11-14 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

LT1057CJ8 datasheet LT1057CJ8 datasheet pdf LT1057CJ8 pinout LT1057CJ8 specifications LT1057CJ8 equivalent LT1057CJ8 replacement LT1057CJ8 cross reference LT1057CJ8 8-CERDIP LT1057CJ8 dual JFET op amp LT1057CJ8 price LT1057CJ8 stock Analog Devices LT1057CJ8 LT1057CJ8 instrumentation amplifier LT1057 vs LF412A LT1057CJ8 active filter

İlgili Bileşenler ve Terimler

Analog Devices LT1057CJ8 LT1057 LT1058 LF412A OP-215 dual operational amplifier precision operational amplifier high-speed operational amplifier JFET input matched amplifier active filter instrumentation amplifier gain-bandwidth product slew rate settling time input offset voltage common-mode voltage range 8-pin CERDIP DIP package through-hole mounting signal conditioning Analog Devices datasheet RoHS REACH
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle