LT1638IS8 - Dual 1.2MHz Micropower R-R Op Amp | Analog Devices
MPN: LT1638IS8 ✓ AktifLT1638IS8 Genel Bakış
An operational amplifier is an analog integrated circuit that amplifies the difference between two input voltages while providing high input impedance and low output impedance. The LT1638 belongs to the rail-to-rail input and output amplifier family, which extends usable input and output voltage ranges toward the positive and negative supply rails. It is a precision amplifier within the broader analog signal-processing IC category.
The LT1638IS8 provides two amplifiers in one package, allowing a single component to handle two related signal paths. Its 1.2 MHz unity-gain bandwidth supports low-frequency instrumentation, sensor interfaces, audio preamplification, and control-loop applications. The 0.4 V/us slew rate helps preserve signal fidelity when driving moderate capacitive loads. The low 170 uA per-amplifier quiescent current is useful in battery-powered and portable systems.
The LT1638IS8 accepts single-supply, dual-supply, and split-supply operation, with a total supply range of 2.5 V to 44 V. Rail-to-rail input behavior supports sensing near the supply rails, while rail-to-rail output capability improves utilization of available output voltage. The device is specified for a -40 C to +85 C operating temperature range and is available in an 8-pin SOIC package.
Typical uses include low-power sensor interfaces, current monitoring, portable measurement equipment, audio signal conditioning, and general-purpose analog control. When designing a board around the LT1638IS8, check output-current limits, capacitive-load stability, and the exact pin arrangement in the manufacturer pin-description table before assigning PCB tracks.
This page consolidates the LT1638IS8 technical characteristics, practical application guidance, package details, and drop-in replacement options into one engineering reference for component selection and PCB planning.
Drop-in alternatifler için LT1638IS8 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
LT1638IS8#PBF
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
LT1638IS8#TR
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
LT1638HS8#PBF
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
LT1638IS8 Maksimum Değerlendirmeler & Elektriksel Özellikler
| Amplifier Type | Dual general-purpose operational amplifier |
| Number of Channels | 2 |
| Input Common-Mode | Rail-to-rail input |
| Output Swing | Rail-to-rail output |
| Gain-Bandwidth Product | 1.2 MHz |
| Slew Rate | 0.4 V/us |
| Total Supply Voltage | 2.5 V to 44 V |
| Durağan Akım | 170 uA per amplifier |
| Maximum Input Offset Voltage | 1100 uV |
| Common-Mode Rejection Ratio | 88 dB |
| İşletim Sıcaklığı Aralığı | -40 C to +85 C |
| Paket | 8-pin SOIC |
| Montaj Türü | Surface Mount |
| Pin Sayısı | 8 |
| Product Type | Precision operational amplifier |
| Over-The-Top Operation | Supported |
LT1638IS8 Pin Yapısı
| Pin 1 | OUTA — Amplifier A output |
| Pin 2 | -INA — Inverting input for amplifier A |
| Pin 3 | +INA — Non-inverting input for amplifier A |
| Pin 4 | V- — Negative supply or ground connection |
| Pin 5 | +INB — Non-inverting input for amplifier B |
| Pin 6 | -INB — Inverting input for amplifier B |
| Pin 7 | OUTB — Amplifier B output |
| Pin 8 | V+ — Positive supply connection |
Tipik Uygulamalar
LT1638IS8 için uygundur 6 uygulamas: Low-Power Sensor Signal Conditioning, Portable Measurement and Instrumentation, Audio Preamplification, Current and Voltage Monitoring, Battery-Powered Analog Control, Low-Level Transducer Interface.
Low-Power Sensor Signal Conditioning
The LT1638IS8 fits sensor front ends that operate from low supply voltages and need input signals near either rail. Its rail-to-rail input stage supports sensors operating close to the supply limits, while the 1.2 MHz gain-bandwidth product provides ample bandwidth for common temperature, pressure, and position sensors. The approximately 170 uA quiescent current per amplifier helps preserve battery life in portable monitors. Place the amplifier close to the sensor and use short, shielded traces to reduce pickup before the signal reaches an ADC.
Önerilen
Portable Measurement and Instrumentation
The dual LT1638IS8 supports compact handheld measurement equipment where two analog channels must be conditioned without adding a second amplifier package. A 2.5 V minimum total supply allows operation from low-energy rails, and the rail-to-rail input and output stages maximize usable signal range in a restricted board area. The 0.4 V/us slew rate is appropriate for slow sensor, transducer, and control signals rather than high-speed waveforms. Verify ADC input ranges and reference accuracy before selecting gain and filtering.
Önerilen
Audio Preamplification
The LT1638IS8 can provide two low-noise preamplifier channels for microphone, headphone-driver, and line-level audio conditioning when the signal bandwidth is modest. Its rail-to-rail output allows the amplifier to use more of the available output swing, while the 1.2 MHz gain-bandwidth product accommodates voice-band and wideband audio paths. The two amplifiers in one 8-pin package also reduce board count. Confirm the required noise performance, output drive, and capacitive load before selecting the gain and output-bias network.
Önerilen
Current and Voltage Monitoring
The LT1638IS8 is appropriate for amplifying a scaled voltage from a current shunt, divider, or transducer in a monitoring circuit. With 170 uA quiescent current per amplifier, it helps limit standing power in supervisory and industrial control systems. Rail-to-rail input operation improves utilization of the measurement range, while the 88 dB common-mode rejection ratio helps reject common disturbance on the sensed signal. Maintain proper input-bias paths and avoid exceeding the output-current limits at high load.
Önerilen
Battery-Powered Analog Control
The micropower LT1638IS8 works well in battery-operated analog control loops where two low-frequency error or feedback signals must be amplified continuously. Its 2.5 V to 44 V total supply range supports both compact low-voltage systems and higher-voltage industrial control environments. The dual configuration permits independent amplifier use or differential signal treatment when the circuit permits. Choose external compensation and feedback values for the intended closed-loop gain, and check stability with the actual load and sampling network.
Önerilen
Low-Level Transducer Interface
The LT1638IS8 can condition low-level outputs from resistive bridges, strain gauges, and other transducers where the useful signal occupies only a small portion of the supply range. Rail-to-rail inputs reduce the need for an elevated mid-supply reference, while the dual package supports excitation buffering and signal amplification in the same circuit. The 1.2 MHz bandwidth is more than adequate for many resistive and thermal transducers. Use the manufacturer input-common-mode and output-swing graphs to confirm that the selected operating point stays within the usable linear range.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: LT1638IS8 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | LT1638IS8#PBF | LT1638IS8#TR | LT1638HS8#PBF |
|---|---|---|---|---|
| Package | SOIC-8 | SOIC-8 | SOIC-8 | SOIC-8 |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Number of Amplifiers | 2 | 2 | 2 | 2 |
| Gain-Bandwidth Product | 1.2 MHz | 1.2 MHz | 1.2 MHz | 1.2 MHz |
| Slew Rate | 0.4 V/us | 0.4 V/us | 0.4 V/us | 0.4 V/us |
| Total Supply Voltage | 2.5 V to 44 V | 2.5 V to 44 V | 2.5 V to 44 V | 2.5 V to 44 V |
| Quiescent Current per Amplifier | 170 uA | 170 uA | 170 uA | 170 uA |
| Input and Output Common-Mode | Rail-to-rail input and output | Rail-to-rail input and output | Rail-to-rail input and output | Rail-to-rail input and output |
Ana Farklılayıcılar
- Dual amplifier in a compact 8-pin SOIC package (karşılaştırma:LT1638IS8#PBF)
- Wide total supply-voltage range for a micropower amplifier (karşılaştırma:LT1638HS8#PBF)
- Rail-to-rail input and output operation (karşılaştırma:LT1638IS8#TR)
Tasarım Notları
The LT1638IS8 is designed for low-power analog signal paths, with approximately 170 uA quiescent current per amplifier. When designing a complete channel, include the current drawn by feedback networks, bias references, load currents, and any downstream converter or ADC. Keep the supply bypass capacitor close to the V+ and V- pins and confirm the total supply voltage remains within the 2.5 V to 44 V range.
Do not assume that rail-to-rail input and output means every point across the full supply range is linear. Check the manufacturer input-common-mode and output-swing graphs at the actual supply voltage and temperature. For unipolar systems, connect V- to ground and use the amplifier output only within the specified output-swing limits; add a mid-supply reference only when the circuit requires a bipolar signal range.
Use the SOIC-8 pin-description table to route the two amplifier channels and place the input and output traces away from high-current switching paths. Keep feedback resistors close to their associated pins to minimize parasitic feedback and instability. Route the supply bypass connection directly to the device pins, and maintain a quiet ground-return path for both amplifier channels.
Uyumluluk Bilgisi
The manufacturer product information identifies the LT1638IS8 family and its lead-free ordering codes, but exact certification status for the target ordering code should be confirmed with Analog Devices before production release.