Analog Devices

LT1638IS8 - Dual 1.2MHz Micropower R-R Op Amp | Analog Devices

MPN: LT1638IS8 ✓ 啟用中
2.5 V to 44 V Vdss 170 uA per amplifier Id 8-pin SOIC Package
MOQ: 1 |

LT1638IS8 概覽

The Analog Devices LT1638IS8 is a dual, micropower, rail-to-rail input and output operational amplifier packaged in an 8-pin SOIC package. It features 1.2 MHz gain-bandwidth product, 0.4 V/us slew rate, operation from a total supply voltage of 2.5 V to 44 V, and approximately 170 uA quiescent current per amplifier. The LT1638 is designed for low-voltage signal conditioning where input and output swing must remain close to the supply rails.

An operational amplifier is an analog integrated circuit that amplifies the difference between two input voltages while providing high input impedance and low output impedance. The LT1638 belongs to the rail-to-rail input and output amplifier family, which extends usable input and output voltage ranges toward the positive and negative supply rails. It is a precision amplifier within the broader analog signal-processing IC category.

The LT1638IS8 provides two amplifiers in one package, allowing a single component to handle two related signal paths. Its 1.2 MHz unity-gain bandwidth supports low-frequency instrumentation, sensor interfaces, audio preamplification, and control-loop applications. The 0.4 V/us slew rate helps preserve signal fidelity when driving moderate capacitive loads. The low 170 uA per-amplifier quiescent current is useful in battery-powered and portable systems.

The LT1638IS8 accepts single-supply, dual-supply, and split-supply operation, with a total supply range of 2.5 V to 44 V. Rail-to-rail input behavior supports sensing near the supply rails, while rail-to-rail output capability improves utilization of available output voltage. The device is specified for a -40 C to +85 C operating temperature range and is available in an 8-pin SOIC package.

Typical uses include low-power sensor interfaces, current monitoring, portable measurement equipment, audio signal conditioning, and general-purpose analog control. When designing a board around the LT1638IS8, check output-current limits, capacitive-load stability, and the exact pin arrangement in the manufacturer pin-description table before assigning PCB tracks.

This page consolidates the LT1638IS8 technical characteristics, practical application guidance, package details, and drop-in replacement options into one engineering reference for component selection and PCB planning.

直接替換替代品,適用於 LT1638IS8 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

LT1638IS8#PBF

✅ 直接替換
📦 SOIC-8
Lead-free ordering suffix for the same LT1638 dual amplifier and 8-pin SOIC footprint

📋 參考替代品(不在目錄中)

LT1638IS8#TR

✅ 直接替換
📦 SOIC-8
Tape-and-reel ordering configuration of the same LT1638IS8 family device

📋 參考替代品(不在目錄中)

LT1638HS8#PBF

✅ 直接替換
📦 SOIC-8
Related LT1638 dual amplifier with a different suffix designation; verify temperature and ordering details

📋 參考替代品(不在目錄中)

LT1638IS8 最大額定值與電氣特性

Amplifier Type Dual general-purpose operational amplifier
Number of Channels 2
Input Common-Mode Rail-to-rail input
Output Swing Rail-to-rail output
Gain-Bandwidth Product 1.2 MHz
Slew Rate 0.4 V/us
Total Supply Voltage 2.5 V to 44 V
靜態電流 170 uA per amplifier
Maximum Input Offset Voltage 1100 uV
Common-Mode Rejection Ratio 88 dB
工作溫度範圍 -40 C to +85 C
封裝 8-pin SOIC
安裝類型 Surface Mount
腳位數 8
Product Type Precision operational amplifier
Over-The-Top Operation Supported

LT1638IS8 腳位配置

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
腳位 1 OUTA — Amplifier A output
腳位 2 -INA — Inverting input for amplifier A
腳位 3 +INA — Non-inverting input for amplifier A
腳位 4 V- — Negative supply or ground connection
腳位 5 +INB — Non-inverting input for amplifier B
腳位 6 -INB — Inverting input for amplifier B
腳位 7 OUTB — Amplifier B output
腳位 8 V+ — Positive supply connection

典型應用

LT1638IS8 適用於 6 應用s: Low-Power Sensor Signal Conditioning, Portable Measurement and Instrumentation, Audio Preamplification, Current and Voltage Monitoring, Battery-Powered Analog Control, Low-Level Transducer Interface.

🧩

Low-Power Sensor Signal Conditioning

The LT1638IS8 fits sensor front ends that operate from low supply voltages and need input signals near either rail. Its rail-to-rail input stage supports sensors operating close to the supply limits, while the 1.2 MHz gain-bandwidth product provides ample bandwidth for common temperature, pressure, and position sensors. The approximately 170 uA quiescent current per amplifier helps preserve battery life in portable monitors. Place the amplifier close to the sensor and use short, shielded traces to reduce pickup before the signal reaches an ADC.

📱

Portable Measurement and Instrumentation

The dual LT1638IS8 supports compact handheld measurement equipment where two analog channels must be conditioned without adding a second amplifier package. A 2.5 V minimum total supply allows operation from low-energy rails, and the rail-to-rail input and output stages maximize usable signal range in a restricted board area. The 0.4 V/us slew rate is appropriate for slow sensor, transducer, and control signals rather than high-speed waveforms. Verify ADC input ranges and reference accuracy before selecting gain and filtering.

🎧

Audio Preamplification

The LT1638IS8 can provide two low-noise preamplifier channels for microphone, headphone-driver, and line-level audio conditioning when the signal bandwidth is modest. Its rail-to-rail output allows the amplifier to use more of the available output swing, while the 1.2 MHz gain-bandwidth product accommodates voice-band and wideband audio paths. The two amplifiers in one 8-pin package also reduce board count. Confirm the required noise performance, output drive, and capacitive load before selecting the gain and output-bias network.

🏭

Current and Voltage Monitoring

The LT1638IS8 is appropriate for amplifying a scaled voltage from a current shunt, divider, or transducer in a monitoring circuit. With 170 uA quiescent current per amplifier, it helps limit standing power in supervisory and industrial control systems. Rail-to-rail input operation improves utilization of the measurement range, while the 88 dB common-mode rejection ratio helps reject common disturbance on the sensed signal. Maintain proper input-bias paths and avoid exceeding the output-current limits at high load.

⚡

Battery-Powered Analog Control

The micropower LT1638IS8 works well in battery-operated analog control loops where two low-frequency error or feedback signals must be amplified continuously. Its 2.5 V to 44 V total supply range supports both compact low-voltage systems and higher-voltage industrial control environments. The dual configuration permits independent amplifier use or differential signal treatment when the circuit permits. Choose external compensation and feedback values for the intended closed-loop gain, and check stability with the actual load and sampling network.

🌐

Low-Level Transducer Interface

The LT1638IS8 can condition low-level outputs from resistive bridges, strain gauges, and other transducers where the useful signal occupies only a small portion of the supply range. Rail-to-rail inputs reduce the need for an elevated mid-supply reference, while the dual package supports excitation buffering and signal amplification in the same circuit. The 1.2 MHz bandwidth is more than adequate for many resistive and thermal transducers. Use the manufacturer input-common-mode and output-swing graphs to confirm that the selected operating point stays within the usable linear range.

推薦產品摘要

LT1638IS8#PBF Same-family dual amplifier 用於: Low-Power Sensor Signal Conditioning, Portable Measurement and Instrumentation, Audio Preamplification, Current and Voltage Monitoring, Battery-Powered Analog Control, Low-Level Transducer Interface LT1638IS8#TR Tape-and-reel supply configuration 用於: Low-Power Sensor Signal Conditioning, Audio Preamplification, Battery-Powered Analog Control LT1638HS8#PBF Related SOIC-8 family option 用於: Portable Measurement and Instrumentation, Current and Voltage Monitoring, Low-Level Transducer Interface
What is the LT1638IS8?
The LT1638IS8 is a dual, micropower, rail-to-rail input and output precision operational amplifier from Analog Devices. It combines two amplifiers in an 8-pin SOIC package, with 1.2 MHz gain-bandwidth product, 0.4 V/us slew rate, and operation across a 2.5 V to 44 V total supply range. According to the Analog Devices LT1638 product page, the device is intended for space-constrained, low-power analog applications.
What is the operating voltage of LT1638IS8?
The LT1638IS8 operates from a 2.5 V to 44 V total supply voltage. It supports single-supply, dual-supply, and split-supply configurations, allowing the amplifier to work with low-voltage rails or higher-voltage systems. The manufacturer identifies the LT1638 as an over-the-top micropower amplifier, meaning its input and output behavior extends toward the supply rails.
What are the key specifications of LT1638IS8 that engineers should know?
The LT1638IS8 provides two rail-to-rail input/output amplifiers in an 8-pin SOIC package. Important parameters include 1.2 MHz gain-bandwidth product, 0.4 V/us slew rate, 170 uA quiescent current per amplifier, 1100 uV maximum input offset voltage, and 88 dB common-mode rejection ratio. Its 2.5 V to 44 V total supply range makes it suitable for low-voltage and higher-voltage instrumentation.
How much current does the LT1638IS8 draw?
The LT1638IS8 draws approximately 170 uA of quiescent current per amplifier. Because the package contains two amplifiers, the device provides two amplifier channels while retaining a low-power operating profile. This characteristic is particularly useful in battery-powered sensors, portable measurement equipment, and analog systems where standby and active current budgets are tightly controlled.
Is the LT1638IS8 suitable for low-voltage sensor interfaces?
Yes, the LT1638IS8 is well suited to low-voltage sensor interfaces because it operates from a 2.5 V minimum total supply and uses rail-to-rail input and output stages. The 1.2 MHz bandwidth and 0.4 V/us slew rate are adequate for many sensor, instrumentation, and control signals. Confirm the sensor output range, required accuracy, and capacitive loading before finalizing the circuit.
What is the difference between LT1638IS8 and LT1638HS8?
The LT1638IS8 and LT1638HS8 are related Analog Devices dual rail-to-rail micropower amplifiers, but their ordering suffixes identify different package or temperature configurations. The LT1638IS8 is the 8-pin SOIC ordering code listed for this product. Verify the exact suffix, temperature grade, and package dimensions against the manufacturer ordering guide before treating either part as a substitution.
What is the best drop-in replacement for LT1638IS8?
The closest documented drop-in candidates are the LT1638IS8#PBF and LT1638IS8#TR ordering codes from Analog Devices, both associated with the LT1638IS8 family and the 8-pin SOIC format. The #TR version differs mainly in tape-and-reel ordering. Because a true replacement must preserve pinout, supply range, and amplifier performance, confirm the manufacturer pin and electrical tables before substitution.
Can LT1638HS8#PBF replace LT1638IS8?
LT1638HS8#PBF is a related LT1638 dual amplifier with the same 8-pin SOIC family format, so it is a candidate for evaluation as a drop-in replacement. The suffix difference may indicate a different temperature grade or orderable configuration. Review the LT1638 pin-description table and compare input offset, bandwidth, supply range, and quiescent current before approving the substitution.
Where to download the LT1638IS8 datasheet PDF?
The authoritative LT1638 documentation is available through the Analog Devices product page at analog.com/en/products/lt1638.html, where the manufacturer provides the data sheet and product resources. Use the manufacturer pin-description table for the exact 8-pin SOIC pin names and the electrical characteristics table for supply, offset, bandwidth, and temperature limits.
Where can I find the LT1638IS8 pinout?
The LT1638IS8 pinout is defined in the manufacturer data-sheet pin-description table for the 8-pin SOIC package. The standard SOIC-8 numbering proceeds counter-clockwise from the pin-1 end of the package. Use that table to assign input, output, and supply pins, because package drawing orientation and marking conventions must be checked against the physical device.
What is the LT1638IS8 slew rate and bandwidth?
The LT1638IS8 has a gain-bandwidth product of 1.2 MHz and a slew rate of 0.4 V/us. These figures determine how quickly the amplifier can respond to changing input signals and how much bandwidth remains at closed-loop gains above unity. They are appropriate for many precision signal-conditioning paths, but not for high-frequency or high-amplitude waveform applications.
Is the LT1638IS8 an automotive-qualified amplifier?
The LT1638IS8 family is a general-purpose precision amplifier, and the automotive qualification status for the exact ordering code should be confirmed before it is used in an automotive design. Use the manufacturer product and qualification documentation to verify AEC-Q100 requirements, temperature grade, and any automotive-specific screening rather than assuming compliance from the family name alone.
Where can I buy LT1638IS8 online?
The LT1638IS8 is listed by authorized component distributors and by Analog Devices through its product page. Current inventory, minimum order quantity, and shipment timing can change by region and order quantity, so request a quotation through the Request a Quote form on this page for the specific package and quantity you need.
How much does LT1638IS8 cost?
Pricing for the LT1638IS8 depends on the exact ordering code, quantity break, and current supplier conditions. Use the Request a Quote form on this page for a current unit quotation and volume pricing for your specific bill of materials. The manufacturer product page also lists a starting list price for the LT1638 family, which can change over time.
What is the lead time and stock status for LT1638IS8?
Lead time and stock status for LT1638IS8 are not fixed and depend on the selected ordering code, factory inventory, and distributor allocation. Request the current availability through the Request a Quote form on this page, specifying the required quantity and whether you need tube, tape-and-reel, or another permitted shipping format.

工程參考資料,適用於 LT1638IS8 — 比較、設計指引及合規資訊。

選型指南

Choose the LT1638IS8 when a design needs two precision amplifiers with rail-to-rail input and output behavior, low quiescent current, and operation across a wide supply range. It is a strong fit for low-power sensors, portable measurement equipment, audio preamplification, and transducer interfaces. Select LT1638IS8#PBF when the lead-free ordering code and standard 8-pin SOIC package are required, and use LT1638IS8#TR when tape-and-reel handling is preferred for automated assembly. Evaluate LT1638HS8#PBF as a related family candidate, but confirm its exact temperature grade, offset specification, and ordering details before treating it as a drop-in replacement. For designs requiring more offset accuracy, lower noise, or faster settling than the LT1638 family provides, select a higher-performance amplifier rather than assuming family interchangeability.

與替代品比較

參數 本產品 LT1638IS8#PBF LT1638IS8#TR LT1638HS8#PBF
Package SOIC-8 SOIC-8 SOIC-8 SOIC-8
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Number of Amplifiers 2 2 2 2
Gain-Bandwidth Product 1.2 MHz 1.2 MHz 1.2 MHz 1.2 MHz
Slew Rate 0.4 V/us 0.4 V/us 0.4 V/us 0.4 V/us
Total Supply Voltage 2.5 V to 44 V 2.5 V to 44 V 2.5 V to 44 V 2.5 V to 44 V
Quiescent Current per Amplifier 170 uA 170 uA 170 uA 170 uA
Input and Output Common-Mode Rail-to-rail input and output Rail-to-rail input and output Rail-to-rail input and output Rail-to-rail input and output

主要差異化特點

  • Dual amplifier in a compact 8-pin SOIC package (對比LT1638IS8#PBF)
  • Wide total supply-voltage range for a micropower amplifier (對比LT1638HS8#PBF)
  • Rail-to-rail input and output operation (對比LT1638IS8#TR)

設計說明

The LT1638IS8 is designed for low-power analog signal paths, with approximately 170 uA quiescent current per amplifier. When designing a complete channel, include the current drawn by feedback networks, bias references, load currents, and any downstream converter or ADC. Keep the supply bypass capacitor close to the V+ and V- pins and confirm the total supply voltage remains within the 2.5 V to 44 V range.

Do not assume that rail-to-rail input and output means every point across the full supply range is linear. Check the manufacturer input-common-mode and output-swing graphs at the actual supply voltage and temperature. For unipolar systems, connect V- to ground and use the amplifier output only within the specified output-swing limits; add a mid-supply reference only when the circuit requires a bipolar signal range.

Use the SOIC-8 pin-description table to route the two amplifier channels and place the input and output traces away from high-current switching paths. Keep feedback resistors close to their associated pins to minimize parasitic feedback and instability. Route the supply bypass connection directly to the device pins, and maintain a quiet ground-return path for both amplifier channels.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The manufacturer product information identifies the LT1638IS8 family and its lead-free ordering codes, but exact certification status for the target ordering code should be confirmed with Analog Devices before production release.

資料驗證日期: 2026-11-14 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

LT1638IS8 datasheet LT1638IS8 datasheet pdf LT1638IS8 pinout LT1638IS8 equivalent LT1638IS8 replacement LT1638IS8 vs LT1638HS8 LT1638IS8 SOIC-8 amplifier LT1638IS8 1.2MHz op amp LT1638IS8 micropower rail-to-rail Analog Devices LT1638IS8 LT1638IS8 price LT1638IS8 stock LT1638IS8 pbf LT1638IS8 trpbf

相關元件與詞彙

Analog Devices LT1638IS8 LT1638IS8#PBF LT1638IS8#TR LT1638HS8#PBF precision operational amplifier dual amplifier rail-to-rail input rail-to-rail output gain-bandwidth product slew rate quiescent current common-mode rejection ratio input offset voltage over-the-top amplifier SOIC-8 surface mount analog signal conditioning low-power sensor interface portable measurement equipment audio preamplifier battery-powered control RoHS REACH AEC-Q100
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情