Analog Devices

LTC1052CH Zero-Drift Op Amp, 5uV Offset | Analog Devices

MPN: LTC1052CH ✓ Aktif
5 uV Vdss 30 pA over operating temperature range Id 8-lead round TO-5 hermetic package Package
MOQ: 1 |

LTC1052CH Genel Bakış

The Analog Devices LTC1052CH is a single-circuit chopper-stabilized, zero-drift operational amplifier with a guaranteed maximum offset voltage of 5 uV, a guaranteed maximum input offset drift of 0.05 uV/degree C, and a guaranteed maximum input bias current of 30 pA. The device is packaged in an 8-lead round TO-5 hermetic package and is specified for industrial temperature operation.

A zero-drift operational amplifier is a precision amplifier that continuously corrects its input offset voltage. The LTC1052 uses chopper stabilization to suppress errors caused by initial offset, temperature change, time, and common-mode voltage. This technique places the amplifier in the hierarchy of precision signal conditioning above conventional precision op amps, within the broader categories of analog amplifiers, amplifiers ICs, and semiconductors.

The LTC1052CH combines picoampere-class input bias current with very low offset drift. According to the manufacturer data sheet, the guaranteed maximum input bias current is 30 pA over the operating temperature range, while the typical offset drift is 0.01 uV/degree C. The device is manufactured using Analog Devices' LTCMOS silicon-gate process and includes an internal gain-of-unity buffer that supports operation from a single supply or dual supplies.

The amplifier's low offset makes it useful where the measured signal is close to the amplifier's own error floor. Picoampere input bias is particularly valuable when the source impedance is high, because bias current multiplied by source impedance can create an error larger than the amplifier's input offset. Engineers also need to account for chopper-stabilized amplifiers' switching-frequency energy, which can require filtering around the internal clock frequency.

Typical applications include low-level sensor signal conditioning, bridge and thermocouple instrumentation, low-current photodiode amplification, precision current measurement, laboratory instrumentation, and battery-powered measurement systems. The hermetic TO-5 enclosure is useful where long-term stability and mechanical robustness are more important than the smaller area of an epoxy or plastic package.

The principal design trade-off is input capacitance versus low-noise operation, because the LTC1052 uses internal chopping and clocking techniques that can introduce periodic output components. Check the manufacturer data sheet for the recommended external filtering network, connect the bypass capacitor directly to the supply pins, and avoid routing sensitive input signals close to clock-carrying traces.

This page combines manufacturer specifications, package information, application guidance, and drop-in replacement analysis. It also highlights the distinctions that matter when comparing zero-drift amplifiers: guaranteed offset, offset drift, input bias current, supply arrangement, clock behavior, and the exact mechanical package.

Drop-in alternatifler için LTC1052CH — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu ürüne yer değiştirme seçenekleri mevcut değil.

Alternatifleri Talep Edin

LTC1052CH Maksimum Değerlendirmeler & Elektriksel Özellikler

Amplifier Type Zero-drift operational amplifier
Ağ Yapısı Chopper-stabilized
Number of Circuits 1 circuit
Guaranteed Maximum Offset Voltage 5 uV
Guaranteed Maximum Input Offset Drift 0.05 uV/degree C
Typical Input Offset Drift 0.01 uV/degree C
Guaranteed Maximum Input Bias Current 30 pA over operating temperature range
Long-Term Stability 100 nV/month
Process Technology Enhanced LTCMOS silicon-gate process
Supply Configuration Single or dual supply
Input Bias Current Low-bias picoampere-class input
Temperature Grade Industrial
Package Type 8-lead round TO-5 hermetic package
Terminal Form Wire
Number of Terminals 8
Package Shape Round
Montaj Türü Through-hole

LTC1052CH round Pin Yapısı Kılavuzu

LTC1052CH (round paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.

round paket pin çizelgesi için LTC1052CH

Ayrıntılı pin çıkış verisi mevcut değil: LTC1052CH.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

LTC1052CH için uygundur 6 uygulamas: Thermocouple Signal Conditioning, Low-Current Sensor Front End, Bridge and Strain-Gauge Instrumentation, Precision Laboratory Instrumentation, Photodiode and Optical Detection, Battery-Powered Precision Monitoring.

🌡️

Thermocouple Signal Conditioning

The LTC1052CH is appropriate for low-level thermocouple instrumentation because its guaranteed maximum input offset of 5 uV and input offset drift of 0.05 uV/degree C limit amplifier-generated error as temperature changes. Its guaranteed maximum input bias current of 30 pA is also useful when the thermocouple and input wiring present a high source impedance. Place the amplifier close to the input connector, use shielded routing, and account for the parasitic thermocouple junctions formed by copper-to-metal transitions. This device supports both single- and dual-supply arrangements, with the final configuration selected after checking the required common-mode range and output swing in the manufacturer data sheet.

⚡

Low-Current Sensor Front End

The LTC1052CH fits current-output sensors whose signal levels approach the microvolt range because its guaranteed maximum offset of 5 uV creates less error than the measured current-derived voltage. The guaranteed maximum input bias current of 30 pA limits loading of high-impedance current sources and sensing resistors. Use the amplifier in a transimpedance or differential stage only after checking input capacitance, stability, and bandwidth requirements. Pay particular attention to the amplifier's internal chopping behavior and add the recommended filtering when the sensor output contains very small signals that must be distinguished from periodic internal-clock artifacts.

🏭

Bridge and Strain-Gauge Instrumentation

The LTC1052CH is useful in bridge and strain-gauge front ends where millivolt-level differential signals require very low input offset and drift. Its 5 uV guaranteed maximum offset is small relative to many conventional bridge excitation outputs, while the 30 pA guaranteed maximum input bias current helps preserve accuracy with high-impedance bridge legs. The hermetic 8-lead TO-5 package also suits mechanically rugged industrial equipment. The design should still include input protection, common-mode-range verification, and filtering for any periodic components associated with chopper stabilization. Use low-thermal-EMF copper conductors where possible because dissimilar metal junctions can generate errors comparable to the amplifier's input offset.

🔬

Precision Laboratory Instrumentation

The LTC1052CH supports laboratory measurement systems where gain drift can obscure the quantity being measured. Its guaranteed maximum input offset drift of 0.05 uV/degree C and typical drift of 0.01 uV/degree C are valuable in long-duration measurements, while its 100 nV/month long-term stability assists with repeatable readings. Use stable reference sources, short input paths, and shielded cables to prevent external thermal EMFs from dominating the result. Because zero-drift amplifiers contain internal clocking functions, monitor the output spectrum and use the filtering arrangement recommended in the manufacturer documentation when driving high-resolution converters.

💡

Photodiode and Optical Detection

The LTC1052CH can amplify weak signals from photodiodes and other optical detectors when the source impedance is high and the signal must be resolved close to the input-referred noise floor. The guaranteed maximum input bias current of 30 pA reduces bias-generated error across a high-value feedback or bias resistor, while the 5 uV maximum offset keeps the amplifier's own error low. Designers must balance input capacitance, leakage from the detector and PCB, and the amplifier's bandwidth. Reverse-bias the photodiode as required by the detector application, keep sensitive nodes compact, and evaluate the recommended filtering for chopper-related spectral content.

🔋

Battery-Powered Precision Monitoring

The LTC1052CH is appropriate for battery-powered industrial or environmental monitoring systems that must resolve small changes in sensor outputs over changing ambient conditions. Its guaranteed maximum input offset drift of 0.05 uV/degree C reduces temperature-dependent measurement error, and the low input bias current minimizes loading from high-impedance dividers or chemical sensors. The single-supply capability can simplify portable designs, although the common-mode range and output swing must be checked against the sensor voltage. Use a low-noise supply arrangement, bypass the supply pins locally, and select filtering that preserves the bandwidth required by the monitoring loop while attenuating internal clock-related components.

What is the LTC1052CH and what are its main specifications?
The LTC1052CH is a single-circuit, chopper-stabilized zero-drift operational amplifier from Analog Devices with a guaranteed maximum offset of 5 uV and offset drift of 0.05 uV/degree C. It also provides a guaranteed maximum input bias current of 30 pA over the operating temperature range. According to the manufacturer data sheet, the device uses an enhanced LTCMOS silicon-gate process and is offered in an 8-lead round TO-5 hermetic package.
What is the input offset voltage of the LTC1052CH?
The LTC1052CH has a guaranteed maximum input offset voltage of 5 uV. Its typical input offset drift is 0.01 uV/degree C, and the guaranteed maximum drift is 0.05 uV/degree C. These values come from the LTC1052 manufacturer data sheet and make the amplifier suitable for measurements where the input signal is close to a few microvolts. Check the data sheet for the complete test conditions and gain used for the offset limits.
How does the LTC1052CH reduce input offset drift?
The LTC1052CH reduces offset drift by continuously correcting its input offset voltage with chopper stabilization. According to the manufacturer product page, this corrects both the initial offset and changes caused by time, temperature, and common-mode voltage. The result is a zero-drift amplifier that combines picoampere input bias current with very low input offset and improved long-term stability.
What is the input bias current of the LTC1052CH?
The LTC1052CH has a guaranteed maximum input bias current of 30 pA over the operating temperature range. This low current is important when the amplifier senses a high-impedance source because the resulting bias error is approximately equal to input bias current multiplied by source impedance. The manufacturer data sheet identifies the device as a low-bias amplifier designed for precision signal-conditioning applications.
Where can I download the LTC1052CH datasheet PDF?
The LTC1052CH datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/1052fa.pdf. The manufacturer data sheet describes the zero-drift amplifier, electrical characteristics, applications, pin functions, and package information. Use the pin-description table and connection diagrams in that document when assigning PCB nets or building a replacement design.
Where can I find the LTC1052CH pinout and package details?
The LTC1052CH uses an 8-lead round TO-5 hermetic package with wire-form terminals, and the package information appears on the Analog Devices product and data-sheet pages. Use the manufacturer pin-description table to assign each of the eight leads because the TO-5 outline has a nonstandard physical arrangement. The XAIPART package diagram library does not include an exact 8-lead TO-5 drawing, so no schematic pin diagram is generated on this page.
Is the LTC1052CH suitable for high-impedance sensor amplification?
Yes, the LTC1052CH is well suited to high-impedance sensor amplification because its guaranteed maximum input bias current is only 30 pA. Bias current multiplied by a high source impedance can otherwise create an input-referred error larger than the amplifier's 5 uV maximum offset. The manufacturer data sheet also identifies picoampere input currents as a key benefit of its low-noise zero-drift architecture.
Does the LTC1052CH require external input filtering for chopper noise?
The LTC1052CH may require filtering to suppress periodic energy associated with its internal chopping and clocking functions. The manufacturer data sheet describes the amplifier's clock behavior and recommends circuit techniques for obtaining the best performance. Check the application and filter sections for the exact recommended network, and place the supply bypass capacitor directly across the device supply pins.
What are the main applications for the LTC1052CH?
The LTC1052CH is intended for precision low-level measurement, including bridge and thermocouple conditioning, photodiode signal amplification, low-current measurement, laboratory instrumentation, and battery-powered sensor circuits. Its 5 uV guaranteed maximum offset and 30 pA guaranteed maximum input bias current reduce errors close to the signal source. Its industrial temperature grade and hermetic TO-5 package suit equipment where stability and robustness are important.
Can the LTC1052CH operate from a single supply?
The LTC1052CH can be operated from a single supply or dual supplies. The manufacturer describes the LTC1052 as a low-noise zero-drift amplifier with an internal gain-of-unity buffer, a topology commonly used to support both supply arrangements. Verify the complete input common-mode range, output swing, and supply limits in the manufacturer data sheet before choosing the bypass-capacitor and grounding arrangement.
What is the best drop-in replacement for the LTC1052CH?
The best drop-in replacement must reproduce the LTC1052CH's 8-lead TO-5 footprint, pin functions, offset limits, bias current, and supply arrangement. No confirmed cross-manufacturer substitute is identified for this exact package and performance combination. Because the LTC1052CH is a legacy hermetic amplifier, request the current lead time through the Request a Quote form on this page rather than substituting a device with a different footprint.
Can another zero-drift amplifier replace the LTC1052CH?
Another zero-drift amplifier can replace the LTC1052CH only after its package, pinout, supply voltage, common-mode range, offset, input bias, noise, and clock-related behavior have been verified. A zero-drift amplifier in a surface-mount package is not a drop-in replacement for the LTC1052CH's 8-lead TO-5 outline. Use the manufacturer data sheets and the Request a Quote form on this page to confirm availability before changing the PCB.
When should I choose the LTC1052CH instead of a conventional precision op amp?
Choose the LTC1052CH when input offset and temperature drift dominate the measurement error and the source can be measured with picoampere-class bias current. Its guaranteed 5 uV maximum offset and 0.05 uV/degree C maximum drift are superior to ordinary precision amplifiers. A conventional precision op amp may be preferable when lower cost, higher bandwidth, lower noise density, or a modern surface-mount package matters more.
How do I buy the LTC1052CH and check its current lead time?
Request the current price, stock position, minimum order quantity, and lead time for the LTC1052CH through the Request a Quote form on this page. Because this is a legacy hermetic TO-5 amplifier, current availability can vary by lot and manufacturer inventory. Provide the required quantity, date code preference, and target production schedule with the request so the supply team can confirm the exact orderable configuration.
What are the key specifications of LTC1052CH that engineers should know?
The key LTC1052CH specifications are its 5 uV guaranteed maximum offset voltage, 0.05 uV/degree C guaranteed maximum input offset drift, 30 pA guaranteed maximum input bias current, and 100 nV/month long-term stability. The part is a single chopper-stabilized amplifier in an 8-lead round TO-5 hermetic package, with an industrial temperature grade. These figures are listed in the manufacturer data sheet and product documentation.

Mühendislik referans verileri: LTC1052CH — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the LTC1052CH when a microvolt-level input must be measured with very low offset, low temperature drift, and picoampere-class bias current in an existing 8-lead TO-5 circuit. It is particularly appropriate for thermocouple, bridge, optical, laboratory, and battery-powered sensor front ends. A conventional precision amplifier may be a better choice when the signal is comfortably above the microvolt range, bandwidth or input noise dominates, or a modern surface-mount package is required. For any proposed substitution, match the mechanical footprint, pin functions, supply range, input common-mode range, offset and drift limits, bias current, stability, and clock-related filtering. If no verified drop-in part is available for the TO-5 footprint, retain the LTC1052CH rather than modifying the PCB solely to accommodate a different package.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün
Brand Analog Devices
Package 8-lead round TO-5 hermetic package
Amplifier Type Zero-drift chopper-stabilized operational amplifier
Number of Circuits 1 circuit
Guaranteed Maximum Offset Voltage 5 uV
Guaranteed Maximum Offset Drift 0.05 uV/degree C
Typical Offset Drift 0.01 uV/degree C
Guaranteed Maximum Input Bias Current 30 pA
Long-Term Stability 100 nV/month
Temperature Grade Industrial

Ana Farklılayıcılar

  • Very low guaranteed input offset for microvolt-level measurements (karşılaştırma:Conventional precision operational amplifiers)
  • Picoampere-class bias current preserves high-impedance source accuracy (karşılaştırma:General-purpose precision operational amplifiers)
  • Hermetic round TO-5 construction for legacy industrial and laboratory equipment (karşılaştırma:Modern surface-mount zero-drift amplifiers)

Tasarım Notları

Do not assume that a generic zero-drift amplifier is a pin-compatible replacement for the LTC1052CH. The exact 8-lead TO-5 outline, lead functions, supply arrangement, common-mode range, offset limits, input bias current, and clock characteristics must all be verified. Surface-mount zero-drift amplifiers generally require a different footprint and may require additional input filtering or different bypassing. Preserve the original circuit topology until the replacement data sheet has been checked against the complete signal path.

Route sensitive inputs and feedback connections away from clock-related internal or external activity, and keep input-node capacitance as low as practical. Use short, guarded traces and consider the manufacturer-recommended filter when the measured bandwidth is narrow enough to permit attenuation of periodic chopper components. Evaluate the resulting phase margin rather than adding large capacitance indiscriminately, because excess load capacitance can reduce stability in a precision transimpedance or gain stage.

Use low-thermal-EMF interconnect materials where the measurement is in the microvolt range, and avoid unnecessary copper-to-lead or connector transitions in the sensitive path. The manufacturer data sheet notes that copper junctions can generate thermal EMFs significantly larger than the amplifier's maximum drift specification. Shield the input, keep the analog ground return compact, and place the supply bypass capacitor directly across the amplifier's supply pins to minimize supply-current-induced disturbances.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The manufacturer product page identifies LTC1052 as a production product. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not stated in the available manufacturer, distributor, or Octopart pages.

Veri doğrulanma tarihi: 2026-11-19 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

LTC1052CH datasheet LTC1052CH pinout LTC1052CH TO-5 package LTC1052CH zero drift amplifier LTC1052CH input offset voltage LTC1052CH input bias current LTC1052CH equivalent LTC1052CH replacement LTC1052CH drop-in replacement Analog Devices LTC1052CH LTC1052CH price LTC1052CH stock LTC1052CH thermocouple amplifier LTC1052CH high impedance sensor

İlgili Bileşenler ve Terimler

Analog Devices LTC1052CH LTC1052 LTC7652 zero-drift operational amplifier chopper-stabilized amplifier precision operational amplifier analog amplifier amplifier IC semiconductor input offset voltage input offset drift input bias current PSRR LTCMOS TO-5 hermetic package 8-lead through-hole package single supply dual supply thermocouple strain gauge photodiode industrial instrumentation thermal EMF
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle