LTC1052CH Zero-Drift Op Amp, 5uV Offset | Analog Devices
料号: LTC1052CH ✓ 量产中LTC1052CH 概述
A zero-drift operational amplifier is a precision amplifier that continuously corrects its input offset voltage. The LTC1052 uses chopper stabilization to suppress errors caused by initial offset, temperature change, time, and common-mode voltage. This technique places the amplifier in the hierarchy of precision signal conditioning above conventional precision op amps, within the broader categories of analog amplifiers, amplifiers ICs, and semiconductors.
The LTC1052CH combines picoampere-class input bias current with very low offset drift. According to the manufacturer data sheet, the guaranteed maximum input bias current is 30 pA over the operating temperature range, while the typical offset drift is 0.01 uV/degree C. The device is manufactured using Analog Devices' LTCMOS silicon-gate process and includes an internal gain-of-unity buffer that supports operation from a single supply or dual supplies.
The amplifier's low offset makes it useful where the measured signal is close to the amplifier's own error floor. Picoampere input bias is particularly valuable when the source impedance is high, because bias current multiplied by source impedance can create an error larger than the amplifier's input offset. Engineers also need to account for chopper-stabilized amplifiers' switching-frequency energy, which can require filtering around the internal clock frequency.
Typical applications include low-level sensor signal conditioning, bridge and thermocouple instrumentation, low-current photodiode amplification, precision current measurement, laboratory instrumentation, and battery-powered measurement systems. The hermetic TO-5 enclosure is useful where long-term stability and mechanical robustness are more important than the smaller area of an epoxy or plastic package.
The principal design trade-off is input capacitance versus low-noise operation, because the LTC1052 uses internal chopping and clocking techniques that can introduce periodic output components. Check the manufacturer data sheet for the recommended external filtering network, connect the bypass capacitor directly to the supply pins, and avoid routing sensitive input signals close to clock-carrying traces.
This page combines manufacturer specifications, package information, application guidance, and drop-in replacement analysis. It also highlights the distinctions that matter when comparing zero-drift amplifiers: guaranteed offset, offset drift, input bias current, supply arrangement, clock behavior, and the exact mechanical package.
直接替换替代料: LTC1052CH ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
该产品暂无直接替换替代料。
请求替代料LTC1052CH 最大额定值与电气特性
| Amplifier Type | Zero-drift operational amplifier |
| 拓扑 | Chopper-stabilized |
| Number of Circuits | 1 circuit |
| Guaranteed Maximum Offset Voltage | 5 uV |
| Guaranteed Maximum Input Offset Drift | 0.05 uV/degree C |
| Typical Input Offset Drift | 0.01 uV/degree C |
| Guaranteed Maximum Input Bias Current | 30 pA over operating temperature range |
| Long-Term Stability | 100 nV/month |
| Process Technology | Enhanced LTCMOS silicon-gate process |
| Supply Configuration | Single or dual supply |
| Input Bias Current | Low-bias picoampere-class input |
| Temperature Grade | Industrial |
| Package Type | 8-lead round TO-5 hermetic package |
| Terminal Form | Wire |
| Number of Terminals | 8 |
| Package Shape | Round |
| 安装类型 | Through-hole |
LTC1052CH round 引脚配置指南
LTC1052CH(round 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: LTC1052CH.
请参阅 数据手册 以查看完整引脚配置。
典型应用
LTC1052CH 适用于 6 应用s: Thermocouple Signal Conditioning, Low-Current Sensor Front End, Bridge and Strain-Gauge Instrumentation, Precision Laboratory Instrumentation, Photodiode and Optical Detection, Battery-Powered Precision Monitoring.
Thermocouple Signal Conditioning
The LTC1052CH is appropriate for low-level thermocouple instrumentation because its guaranteed maximum input offset of 5 uV and input offset drift of 0.05 uV/degree C limit amplifier-generated error as temperature changes. Its guaranteed maximum input bias current of 30 pA is also useful when the thermocouple and input wiring present a high source impedance. Place the amplifier close to the input connector, use shielded routing, and account for the parasitic thermocouple junctions formed by copper-to-metal transitions. This device supports both single- and dual-supply arrangements, with the final configuration selected after checking the required common-mode range and output swing in the manufacturer data sheet.
推荐
Low-Current Sensor Front End
The LTC1052CH fits current-output sensors whose signal levels approach the microvolt range because its guaranteed maximum offset of 5 uV creates less error than the measured current-derived voltage. The guaranteed maximum input bias current of 30 pA limits loading of high-impedance current sources and sensing resistors. Use the amplifier in a transimpedance or differential stage only after checking input capacitance, stability, and bandwidth requirements. Pay particular attention to the amplifier's internal chopping behavior and add the recommended filtering when the sensor output contains very small signals that must be distinguished from periodic internal-clock artifacts.
推荐
Bridge and Strain-Gauge Instrumentation
The LTC1052CH is useful in bridge and strain-gauge front ends where millivolt-level differential signals require very low input offset and drift. Its 5 uV guaranteed maximum offset is small relative to many conventional bridge excitation outputs, while the 30 pA guaranteed maximum input bias current helps preserve accuracy with high-impedance bridge legs. The hermetic 8-lead TO-5 package also suits mechanically rugged industrial equipment. The design should still include input protection, common-mode-range verification, and filtering for any periodic components associated with chopper stabilization. Use low-thermal-EMF copper conductors where possible because dissimilar metal junctions can generate errors comparable to the amplifier's input offset.
推荐
Precision Laboratory Instrumentation
The LTC1052CH supports laboratory measurement systems where gain drift can obscure the quantity being measured. Its guaranteed maximum input offset drift of 0.05 uV/degree C and typical drift of 0.01 uV/degree C are valuable in long-duration measurements, while its 100 nV/month long-term stability assists with repeatable readings. Use stable reference sources, short input paths, and shielded cables to prevent external thermal EMFs from dominating the result. Because zero-drift amplifiers contain internal clocking functions, monitor the output spectrum and use the filtering arrangement recommended in the manufacturer documentation when driving high-resolution converters.
推荐
Photodiode and Optical Detection
The LTC1052CH can amplify weak signals from photodiodes and other optical detectors when the source impedance is high and the signal must be resolved close to the input-referred noise floor. The guaranteed maximum input bias current of 30 pA reduces bias-generated error across a high-value feedback or bias resistor, while the 5 uV maximum offset keeps the amplifier's own error low. Designers must balance input capacitance, leakage from the detector and PCB, and the amplifier's bandwidth. Reverse-bias the photodiode as required by the detector application, keep sensitive nodes compact, and evaluate the recommended filtering for chopper-related spectral content.
推荐
Battery-Powered Precision Monitoring
The LTC1052CH is appropriate for battery-powered industrial or environmental monitoring systems that must resolve small changes in sensor outputs over changing ambient conditions. Its guaranteed maximum input offset drift of 0.05 uV/degree C reduces temperature-dependent measurement error, and the low input bias current minimizes loading from high-impedance dividers or chemical sensors. The single-supply capability can simplify portable designs, although the common-mode range and output swing must be checked against the sensor voltage. Use a low-noise supply arrangement, bypass the supply pins locally, and select filtering that preserves the bandwidth required by the monitoring loop while attenuating internal clock-related components.
推荐
工程参考数据: LTC1052CH ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Brand | Analog Devices |
| Package | 8-lead round TO-5 hermetic package |
| Amplifier Type | Zero-drift chopper-stabilized operational amplifier |
| Number of Circuits | 1 circuit |
| Guaranteed Maximum Offset Voltage | 5 uV |
| Guaranteed Maximum Offset Drift | 0.05 uV/degree C |
| Typical Offset Drift | 0.01 uV/degree C |
| Guaranteed Maximum Input Bias Current | 30 pA |
| Long-Term Stability | 100 nV/month |
| Temperature Grade | Industrial |
关键差异点
- Very low guaranteed input offset for microvolt-level measurements (对比 Conventional precision operational amplifiers)
- Picoampere-class bias current preserves high-impedance source accuracy (对比 General-purpose precision operational amplifiers)
- Hermetic round TO-5 construction for legacy industrial and laboratory equipment (对比 Modern surface-mount zero-drift amplifiers)
设计说明
Do not assume that a generic zero-drift amplifier is a pin-compatible replacement for the LTC1052CH. The exact 8-lead TO-5 outline, lead functions, supply arrangement, common-mode range, offset limits, input bias current, and clock characteristics must all be verified. Surface-mount zero-drift amplifiers generally require a different footprint and may require additional input filtering or different bypassing. Preserve the original circuit topology until the replacement data sheet has been checked against the complete signal path.
Route sensitive inputs and feedback connections away from clock-related internal or external activity, and keep input-node capacitance as low as practical. Use short, guarded traces and consider the manufacturer-recommended filter when the measured bandwidth is narrow enough to permit attenuation of periodic chopper components. Evaluate the resulting phase margin rather than adding large capacitance indiscriminately, because excess load capacitance can reduce stability in a precision transimpedance or gain stage.
Use low-thermal-EMF interconnect materials where the measurement is in the microvolt range, and avoid unnecessary copper-to-lead or connector transitions in the sensitive path. The manufacturer data sheet notes that copper junctions can generate thermal EMFs significantly larger than the amplifier's maximum drift specification. Shield the input, keep the analog ground return compact, and place the supply bypass capacitor directly across the amplifier's supply pins to minimize supply-current-induced disturbances.
合规信息
The manufacturer product page identifies LTC1052 as a production product. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not stated in the available manufacturer, distributor, or Octopart pages.