MAX232EEPE+ - 120kbps RS-232 Transceiver | Analog Devices
MPN: MAX232EEPE+ ✓ AktifMAX232EEPE+ Genel Bakış
An RS-232 transceiver is an interface IC that bridges digital logic and a serial communications port. The MAX232 belongs to the line-driver and receiver hierarchy used to implement RS-232 and V.28 links where a modern microcontroller or processor uses low-voltage logic rather than the bipolar plus-and-minus voltage levels required by RS-232. Its two transmit channels and two receive channels support full-duplex point-to-point communication when paired with the appropriate serial interface connector and signal conditioning.
Key features include two drivers, two receivers, operation from a single 5 V supply, support for data rates up to 120 kbps, and 15 kV ESD protection. The integrated charge-pump circuitry allows the device to generate the RS-232 transmission voltage levels without a separate plus-or-minus 12 V supply. This reduces the external power requirements of equipment that otherwise needs both low-voltage logic power and bipolar RS-232 level generation.
The MAX232E family is designed for EIA/TIA-232E and CCITT V.28 communications interfaces, particularly applications where plus or minus 12 V is unavailable. According to the Analog Devices MAX232E product page, the MAX232E is offered in 16-pin TSSOP, narrow SO, wide SO, and DIP packages. The MAX232EEPE+ ordering code selects the 16-pin PDIP package and the E temperature grade, making it suitable for designs assembled with conventional through-hole hardware.
Typical uses include industrial serial controllers, point-of-sale equipment, test and measurement instruments, embedded control panels, and legacy peripheral interfaces. The 120 kbps capability is substantially above common asynchronous modem speeds while remaining suitable for RS-232 links to computers, instruments, and industrial controllers. The 2-transmitter, 2-receiver arrangement can support one bidirectional channel or two unidirectional channels depending on how the transmitter and receiver pins are connected.
PCB design should account for charge-pump capacitors, supply bypassing, and protection-network placement. Keep the charge-pump capacitors close to their designated pins, provide a low-impedance supply connection, and route communications traces away from clocks, switching regulators, and high-current return paths. Through-hole DIP assembly provides generous lead spacing, but signal integrity still depends on a continuous ground plane and controlled return-current paths.
This page combines the confirmed electrical and packaging characteristics with practical RS-232 design guidance, interface alternatives, and application-oriented selection criteria. It also distinguishes genuine package-compatible substitutions from functional alternatives that would require a different footprint or different channel arrangement.
Drop-in alternatifler için MAX232EEPE+ — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller MAX232EEPE+ (aynı form faktörü ve ayağa oturma) — farklı olan ESD Protection, Package, Mounting Type, Logic Compatibility, Maximum Data Rate.
MAX232AEPE+
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
MAX232EPE+
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
MAX232CPE+
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
MAX232EEPE+ Özellikler
| Product Type | RS-232 transceiver |
| Besleme Gerilimi | 5 V |
| Transmitter Count | 2 |
| Receiver Count | 2 |
| Maximum Data Rate | 120 kbps |
| ESD Protection | 15 kV |
| Interface Standard | EIA/TIA-232E and CCITT V.28 |
| Paket | 16-pin PDIP |
| Pin Sayısı | 16 pins |
| Montaj Türü | Through-hole DIP |
| Logic Compatibility | TTL/CMOS-compatible RS-232 interface |
| Power-Supply Topology | Single 5 V supply with integrated RS-232 charge-pump voltage generation |
MAX232EEPE+ 16-pin pdip Pin Yapısı Kılavuzu
MAX232EEPE+ (16-pin pdip paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.
Ayrıntılı pin çıkış verisi mevcut değil: MAX232EEPE+.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
MAX232EEPE+ için uygundur 6 uygulamas: Industrial Serial Control, Point-of-Sale Terminal Interface, Test and Measurement Equipment, Embedded Data Acquisition, Legacy Peripheral Upgrade, Communication and Networking Equipment.
Industrial Serial Control
The MAX232EEPE+ fits legacy industrial controllers that must retain an RS-232 port while operating from a 5 V logic supply. Its two transmitters and two receivers support either a full-duplex point-to-point link or paired unidirectional links, while the 120 kbps limit comfortably covers many controller-to-console protocols. The 16-pin PDIP footprint also simplifies repair and industrial assembly practices. Because the E grade is intended for a defined commercial-temperature range, equipment expected to operate below 0 C or above 70 C should evaluate the MAX232AEPE+ instead. Keep the charge-pump capacitors and bypass capacitor close to the IC to limit supply disturbance during line transitions.
Önerilen
Point-of-Sale Terminal Interface
The MAX232EEPE+ provides the level translation required between a 5 V embedded controller and an RS-232 receipt printer or customer-facing terminal. Two transmit and receive channels permit control traffic and acknowledgement traffic to coexist on one RS-232 port. Its 120 kbps maximum rate is more than adequate for character-oriented POS protocols, while the integrated charge pump eliminates a separate plus-or-minus 12 V supply. The 15 kV ESD rating adds protection at the connector-facing pins, although an external network may still be required for severe industrial surges. Preserve a short ground return from the connector to the PCB ground plane to avoid interpreting common-mode voltage as data corruption.
Önerilen
Test and Measurement Equipment
The MAX232EEPE+ is appropriate for laboratory instruments and service equipment that communicate through an RS-232 control port. A microcontroller or processor operating at 5 V can use the device's two receivers for incoming commands and its two transmitters for status or measurement data. The 120 kbps rate supports legacy instrumentation while the 15 kV ESD protection helps manage cable-borne electrostatic discharge at the interface. In a precision instrument, keep the RS-232 return path away from analog input and reference traces to reduce ground-current coupling. The DIP package is particularly convenient where the instrument is assembled for serviceability and where a socket is used for field replacement.
Önerilen
Embedded Data Acquisition
The MAX232EEPE+ can connect a 5 V embedded controller to a legacy RS-232 instrument, sensor gateway, or service interface. Its two channels allow the controller to receive commands and transmit results without requiring two separate interface ICs. At a maximum rate of 120 kbps, the transceiver supports common serial configurations while avoiding the complexity of a high-speed differential physical layer. Integrated charge-pump operation means the board needs only a 5 V rail rather than separate bipolar rails for the RS-232 interface. For acquisition systems, route the cable-side traces directly toward the protection and connector region, and keep the logic-side traces away from switching supplies and high-current actuator returns.
Önerilen
Legacy Peripheral Upgrade
The MAX232EEPE+ is useful when modernizing a legacy peripheral that exposes an RS-232 port but lacks a current-voltage-compatible interface driver. A 5 V controller can communicate through the two transmitters and two receivers without reproducing external charge-pump circuitry. The 16-pin PDIP package matches repair-oriented and through-hole assembly requirements, while operation up to 120 kbps covers established peripheral protocols. The principal qualification decision is environmental: use the E grade only within its specified temperature range, or choose the A grade for wider industrial coverage. During installation, verify the DB9 or equivalent connector pinout, signal polarity, flow control, and ground reference before exchanging the interface assembly.
Önerilen
Communication and Networking Equipment
The MAX232EEPE+ can support management, configuration, or diagnostic ports in communication equipment built around older RS-232 service interfaces. The two-channel arrangement is useful when one path carries commands while the other carries status information. Its 120 kbps capability suits administrative protocols rather than bulk file transfer, and its single 5 V supply simplifies integration with TTL/CMOS control logic. The 15 kV ESD protection characteristic improves robustness at an exposed interface, but installation practices remain important: use a dedicated cable ground, minimize loop area, and consider external surge protection for long outdoor runs. Choose the wider-temperature MAX232AEPE+ if the enclosure operates outside the MAX232EEPE+ grade limits.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: MAX232EEPE+ — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | MAX232AEPE+ | MAX232EPE+ | MAX232CPE+ |
|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 16-pin PDIP | 16-pin PDIP | 16-pin PDIP | 16-pin PDIP |
| Device Type | Dual RS-232 transceiver | Dual RS-232 transceiver | Dual RS-232 transceiver | Dual RS-232 transceiver |
| Transmitter and Receiver Count | 2 transmitters and 2 receivers | 2 transmitters and 2 receivers | 2 transmitters and 2 receivers | 2 transmitters and 2 receivers |
| Maximum Data Rate | 120 kbps | 120 kbps | 120 kbps | 120 kbps |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V |
| Temperature Grade | E grade | A grade | E-grade ordering variant | C grade |
| Mounting Style | Through-hole PDIP | Through-hole PDIP | Through-hole PDIP | Through-hole PDIP |
Ana Farklılayıcılar
- Maintains the MAX232E 2/2 RS-232 architecture in a serviceable through-hole package (karşılaştırma:MAX3232ECDR)
- Provides a wider industrial temperature option in the same 16-pin PDIP footprint (karşılaştırma:MAX232EPE+)
- Combines 5 V operation with 15 kV ESD-protected RS-232 interfaces (karşılaştırma:MAX232CPE+)
Tasarım Notları
Place all charge-pump capacitors and the supply-bypass capacitor directly beside their associated MAX232EEPE+ pins. Keep the traces short, use the shortest practical ground return, and avoid routing charge-pump nodes beneath long RS-232 connector traces. The manufacturer datasheet’s recommended capacitor values and PCB layout should control the final implementation because incorrect values can alter startup behavior or increase line-transition noise.
Do not treat the MAX232EEPE+ as a TTL-level RS-232 driver. The transmitters produce the bipolar voltage levels required by RS-232, while the receivers accept those cable-side levels and convert them to logic. Confirm whether each channel is connected for transmit, receive, or full-duplex operation, and verify that the DB9 connector pin assignment matches the board’s routing rather than assuming a universal connector convention.
Keep the connector-side RS-232 traces away from clocks, switching-regulator outputs, relay coils, and high-current return paths. Provide a direct chassis or signal-ground path to the connector, but avoid routing surge current through sensitive logic ground. When long or outdoor cables are unavoidable, evaluate an external transient-protection network and controlled ESD discharge path so that cable transients do not repeatedly stress the interface pins.
The MAX232EEPE+ is a linear interface IC rather than a power semiconductor, so a Safe Operating Area chart is not applicable. Nevertheless, the 5 V supply current dissipates power in the device. Provide adequate copper and ventilation around the 16-pin PDIP, and keep the assembly within the selected grade’s ambient-temperature limits. Use the A-grade alternative when the E-grade operating range cannot cover the enclosure temperature.
Uyumluluk Bilgisi
The product is a commercial RS-232 interface IC; no AEC-Q100 automotive qualification is identified. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or current compliance documentation.