Analog Devices

MAX232EEPE+ - 120kbps RS-232 Transceiver | Analog Devices

부품 번호: MAX232EEPE+ ✓ 활성
5 V Vdss 16-pin PDIP Package
MOQ: 1 |

MAX232EEPE+ 개요

Analog Devices MAX232EEPE+ is a dual RS-232 driver and dual receiver interface IC operating from a single 5 V supply at data rates up to 120 kbps, packaged in a 16-pin PDIP. The device translates between TTL/CMOS logic levels and EIA/TIA-232E serial signal levels while providing 15 kV ESD protection on the RS-232 interface.

An RS-232 transceiver is an interface IC that bridges digital logic and a serial communications port. The MAX232 belongs to the line-driver and receiver hierarchy used to implement RS-232 and V.28 links where a modern microcontroller or processor uses low-voltage logic rather than the bipolar plus-and-minus voltage levels required by RS-232. Its two transmit channels and two receive channels support full-duplex point-to-point communication when paired with the appropriate serial interface connector and signal conditioning.

Key features include two drivers, two receivers, operation from a single 5 V supply, support for data rates up to 120 kbps, and 15 kV ESD protection. The integrated charge-pump circuitry allows the device to generate the RS-232 transmission voltage levels without a separate plus-or-minus 12 V supply. This reduces the external power requirements of equipment that otherwise needs both low-voltage logic power and bipolar RS-232 level generation.

The MAX232E family is designed for EIA/TIA-232E and CCITT V.28 communications interfaces, particularly applications where plus or minus 12 V is unavailable. According to the Analog Devices MAX232E product page, the MAX232E is offered in 16-pin TSSOP, narrow SO, wide SO, and DIP packages. The MAX232EEPE+ ordering code selects the 16-pin PDIP package and the E temperature grade, making it suitable for designs assembled with conventional through-hole hardware.

Typical uses include industrial serial controllers, point-of-sale equipment, test and measurement instruments, embedded control panels, and legacy peripheral interfaces. The 120 kbps capability is substantially above common asynchronous modem speeds while remaining suitable for RS-232 links to computers, instruments, and industrial controllers. The 2-transmitter, 2-receiver arrangement can support one bidirectional channel or two unidirectional channels depending on how the transmitter and receiver pins are connected.

PCB design should account for charge-pump capacitors, supply bypassing, and protection-network placement. Keep the charge-pump capacitors close to their designated pins, provide a low-impedance supply connection, and route communications traces away from clocks, switching regulators, and high-current return paths. Through-hole DIP assembly provides generous lead spacing, but signal integrity still depends on a continuous ground plane and controlled return-current paths.

This page combines the confirmed electrical and packaging characteristics with practical RS-232 design guidance, interface alternatives, and application-oriented selection criteria. It also distinguishes genuine package-compatible substitutions from functional alternatives that would require a different footprint or different channel arrangement.

드롭인 대체품: MAX232EEPE+ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: MAX232EEPE+ (동일 폼 팩터 및 풋프린트) — 차이점: ESD Protection, Package, Mounting Type, Logic Compatibility, Maximum Data Rate.

Analog Devices
ESD Protection: 15kV HBM
Package: 16-pin PDIP, 0.300 inch, 7.62mm
Mounting Type: Through-hole
비교 대상: MAX232EEPE+ →
Maxim Integrated
ESD Protection: ±15 kV HBM on RS-232 pins (per Maxim datasheet family)
Package: 16-PDIP (Plastic DIP, 0.300 inch / 7.62 mm)
Mounting Type: Through-Hole
비교 대상: MAX232EEPE+ →

MAX232AEPE+

✅ 드롭인
📦 16-pin PDIP
Same 16-pin PDIP interface; A-grade temperature qualification replaces the E grade, with the A-grade extending coverage by approximately 40 C at the cold end and 15 C at the hot end.

📋 참조 대체품 (카탈로그에 없음)

MAX232EPE+

✅ 드롭인
📦 16-pin PDIP
Same MAX232E 16-pin PDIP architecture and 120 kbps interface rating; ordering code omits the repeated E suffix associated with MAX232EEPE+.

📋 참조 대체품 (카탈로그에 없음)

MAX232CPE+

✅ 드롭인
📦 16-pin PDIP
Same 16-pin PDIP MAX232 footprint and 2-transmitter, 2-receiver organization; C-grade temperature qualification differs from the E grade by approximately 0 C at the cold end and 15 C at the hot end.

📋 참조 대체품 (카탈로그에 없음)

MAX232EEPE+ 사양

Product Type RS-232 transceiver
공급 전압 5 V
Transmitter Count 2
Receiver Count 2
Maximum Data Rate 120 kbps
ESD Protection 15 kV
Interface Standard EIA/TIA-232E and CCITT V.28
패키지 16-pin PDIP
핀 수 16 pins
실장 유형 Through-hole DIP
Logic Compatibility TTL/CMOS-compatible RS-232 interface
Power-Supply Topology Single 5 V supply with integrated RS-232 charge-pump voltage generation

MAX232EEPE+ 16-pin pdip 핀 구성 가이드

MAX232EEPE+(16-pin pdip 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

MAX232EEPE+의 16-pin pdip 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: MAX232EEPE+.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

MAX232EEPE+ 적합 용도: 6 애플리케이션s: Industrial Serial Control, Point-of-Sale Terminal Interface, Test and Measurement Equipment, Embedded Data Acquisition, Legacy Peripheral Upgrade, Communication and Networking Equipment.

🏭

Industrial Serial Control

The MAX232EEPE+ fits legacy industrial controllers that must retain an RS-232 port while operating from a 5 V logic supply. Its two transmitters and two receivers support either a full-duplex point-to-point link or paired unidirectional links, while the 120 kbps limit comfortably covers many controller-to-console protocols. The 16-pin PDIP footprint also simplifies repair and industrial assembly practices. Because the E grade is intended for a defined commercial-temperature range, equipment expected to operate below 0 C or above 70 C should evaluate the MAX232AEPE+ instead. Keep the charge-pump capacitors and bypass capacitor close to the IC to limit supply disturbance during line transitions.

🖥️

Point-of-Sale Terminal Interface

The MAX232EEPE+ provides the level translation required between a 5 V embedded controller and an RS-232 receipt printer or customer-facing terminal. Two transmit and receive channels permit control traffic and acknowledgement traffic to coexist on one RS-232 port. Its 120 kbps maximum rate is more than adequate for character-oriented POS protocols, while the integrated charge pump eliminates a separate plus-or-minus 12 V supply. The 15 kV ESD rating adds protection at the connector-facing pins, although an external network may still be required for severe industrial surges. Preserve a short ground return from the connector to the PCB ground plane to avoid interpreting common-mode voltage as data corruption.

🔧

Test and Measurement Equipment

The MAX232EEPE+ is appropriate for laboratory instruments and service equipment that communicate through an RS-232 control port. A microcontroller or processor operating at 5 V can use the device's two receivers for incoming commands and its two transmitters for status or measurement data. The 120 kbps rate supports legacy instrumentation while the 15 kV ESD protection helps manage cable-borne electrostatic discharge at the interface. In a precision instrument, keep the RS-232 return path away from analog input and reference traces to reduce ground-current coupling. The DIP package is particularly convenient where the instrument is assembled for serviceability and where a socket is used for field replacement.

📡

Embedded Data Acquisition

The MAX232EEPE+ can connect a 5 V embedded controller to a legacy RS-232 instrument, sensor gateway, or service interface. Its two channels allow the controller to receive commands and transmit results without requiring two separate interface ICs. At a maximum rate of 120 kbps, the transceiver supports common serial configurations while avoiding the complexity of a high-speed differential physical layer. Integrated charge-pump operation means the board needs only a 5 V rail rather than separate bipolar rails for the RS-232 interface. For acquisition systems, route the cable-side traces directly toward the protection and connector region, and keep the logic-side traces away from switching supplies and high-current actuator returns.

🔧

Legacy Peripheral Upgrade

The MAX232EEPE+ is useful when modernizing a legacy peripheral that exposes an RS-232 port but lacks a current-voltage-compatible interface driver. A 5 V controller can communicate through the two transmitters and two receivers without reproducing external charge-pump circuitry. The 16-pin PDIP package matches repair-oriented and through-hole assembly requirements, while operation up to 120 kbps covers established peripheral protocols. The principal qualification decision is environmental: use the E grade only within its specified temperature range, or choose the A grade for wider industrial coverage. During installation, verify the DB9 or equivalent connector pinout, signal polarity, flow control, and ground reference before exchanging the interface assembly.

🌐

Communication and Networking Equipment

The MAX232EEPE+ can support management, configuration, or diagnostic ports in communication equipment built around older RS-232 service interfaces. The two-channel arrangement is useful when one path carries commands while the other carries status information. Its 120 kbps capability suits administrative protocols rather than bulk file transfer, and its single 5 V supply simplifies integration with TTL/CMOS control logic. The 15 kV ESD protection characteristic improves robustness at an exposed interface, but installation practices remain important: use a dedicated cable ground, minimize loop area, and consider external surge protection for long outdoor runs. Choose the wider-temperature MAX232AEPE+ if the enclosure operates outside the MAX232EEPE+ grade limits.

What is the MAX232EEPE+?
The MAX232EEPE+ is a dual-driver, dual-receiver RS-232 transceiver that operates from a single 5 V supply and supports data rates up to 120 kbps. According to the Analog Devices MAX232E product page, the MAX232E family meets EIA/TIA-232E and CCITT V.28 specifications. The MAX232EEPE+ is supplied in a 16-pin PDIP package for conventional through-hole PCB assembly.
Where can I download the MAX232EEPE+ datasheet PDF?
The MAX232EEPE+ datasheet can be obtained from the Analog Devices MAX232E product page at https://www.analog.com/en/products/max232e.html. The manufacturer page identifies the MAX232E family's EIA/TIA-232E and CCITT V.28 compliance, 120 kbps operation, and available 16-pin package options. Use the pin-description and electrical-characteristics tables in the manufacturer datasheet when assigning PCB signals and selecting external capacitors.
What is the MAX232EEPE+ pinout?
The MAX232EEPE+ uses a 16-pin PDIP footprint, but its complete numbered pin map is not reproduced on this page. Use the package drawing and pin-description table in the Analog Devices MAX232E datasheet before assigning driver inputs, receiver outputs, supply pins, ground, and charge-pump capacitor connections. Confirm the E-grade ordering code because suffix changes can identify different temperature grades, package styles, or qualification options.
How fast can MAX232EEPE+ transmit RS-232 data?
The MAX232EEPE+ supports RS-232 data rates up to 120 kbps. According to the Analog Devices MAX232E product page, the MAX232E family meets all EIA/TIA-232E and CCITT V.28 specifications at data rates up to 120 kbps when loaded. This rate comfortably supports common asynchronous serial links used by computers, industrial controllers, and test equipment.
Does the MAX232EEPE+ need a plus or minus 12 V supply?
No. The MAX232EEPE+ operates from a single 5 V supply and uses integrated charge-pump circuitry to generate the bipolar voltage levels required for RS-232 transmission. The manufacturer describes the MAX220 through MAX249 family as especially useful where plus or minus 12 V is unavailable, allowing the interface to share a conventional 5 V system supply.
How much ESD protection does the MAX232EEPE+ provide?
The MAX232EEPE+ provides 15 kV ESD protection on its RS-232 interface. The product description for this exact ordering code identifies it as a 15 kV ESD-protected, single 5 V RS-232 transceiver. External protection may still be appropriate when cables are exposed to severe industrial transients or when the interface must meet requirements beyond the IC's specified ESD rating.
MAX232EEPE+ vs MAX232AEPE+ - which temperature grade should I choose?
The MAX232AEPE+ is the better choice for industrial temperature coverage, while the MAX232EEPE+ is the E-grade option. Both use the 16-pin PDIP arrangement, but the A-grade extends operation into the industrial temperature region. The exact limits should be confirmed in the manufacturer datasheet before either part is placed into a temperature-controlled or outdoor enclosure.
When should I choose MAX232EEPE+ over MAX232CPE+?
Choose the MAX232EEPE+ when the E-grade temperature range and the MAX232E family's documented RS-232 behavior are appropriate for the product. Choose the MAX232CPE+ when its corresponding C-grade electrical and temperature limits meet the design requirement and the supply configuration is suitable. Both are 16-pin PDIP RS-232 transceivers, so confirm the complete pin and parameter differences before substitution.
What is the best drop-in replacement for MAX232EEPE+?
The closest documented same-footprint choices are the MAX232AEPE+, MAX232EPE+, and MAX232CPE+, all of which use the 16-pin PDIP arrangement. The MAX232AEPE+ changes the temperature grade, the MAX232EPE+ changes the ordering suffix, and the MAX232CPE+ changes the grade designation. Treat all three as candidate drop-ins only after checking the manufacturer pinout, operating-temperature limits, and electrical characteristics against the target design.
Can MAX232AEPE+ replace MAX232EEPE+ without changing the PCB?
The MAX232AEPE+ can serve as a package-compatible candidate because it uses the same 16-pin PDIP footprint and retains the MAX232E family interface arrangement. Its principal engineering difference is the A-grade temperature qualification, which is more appropriate for industrial environments. Before replacing the MAX232EEPE+, verify supply voltage, charge-pump capacitor requirements, temperature limits, and every numbered signal against the manufacturer datasheets.
What is a cross-brand equivalent for MAX232EEPE+?
No cross-brand 16-pin PDIP equivalent can be confirmed from the available cross-reference results, so no manufacturer substitution is asserted here. A valid cross-brand drop-in must reproduce the 16-pin footprint, two transmitters, two receivers, 5 V operation, charge-pump capacitor arrangement, and electrical limits. Use the Request a Quote form on this page to request assistance identifying a qualified second source for the required production quantity.
Where can I buy MAX232EEPE+ and check its lead time?
Use the Request a Quote form on this page to request MAX232EEPE+ availability, current lead time, and purchasing options for the required quantity. The 16-pin PDIP package is specified for the MAX232EEPE+, and current catalog listings identify the device as an in-stock RS-232 transceiver. The quote request allows procurement and engineering teams to confirm the exact suffix, packaging, and delivery plan.
Is MAX232EEPE+ in stock?
Current product listings identify MAX232EEPE+ as available, including a distributor listing reporting 1,412 units in stock at the time of its product-page capture. Inventory changes quickly and may be reserved before an order is placed. Use the Request a Quote form on this page for a current stock confirmation, minimum order quantity, and lead-time response for the quantity you need.
What are the key specifications engineers should know about MAX232EEPE+?
The MAX232EEPE+ is a 5 V, dual-driver and dual-receiver RS-232 transceiver rated for data rates up to 120 kbps, with 15 kV ESD protection and a 16-pin PDIP package. According to the Analog Devices MAX232E product page, it conforms to EIA/TIA-232E and CCITT V.28 requirements. Its integrated charge-pump approach eliminates a separate bipolar supply while retaining two full-duplex-capable communication channels.
What can replace MAX232EEPE+?
Package-compatible candidates include the MAX232AEPE+, MAX232EPE+, and MAX232CPE+ because each is identified as a 16-pin PDIP MAX232-family option. The A-, E-, and C-grade suffixes distinguish ordering and temperature variants rather than changing the basic two-driver, two-receiver architecture. Confirm the exact suffix, grade limits, pin functions, and charge-pump values before approving any replacement.

엔지니어링 참조 데이터: MAX232EEPE+ — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the MAX232EEPE+ when an existing design requires a 5 V, dual-driver and dual-receiver RS-232 interface in a 16-pin PDIP footprint and its E-grade temperature range is adequate. Choose the MAX232AEPE+ when the same electrical and package arrangement is needed in a wider industrial temperature environment. Choose the MAX232EPE+ when the manufacturer’s ordering-code interpretation matches the production BOM and pinout requirements. Choose the MAX232CPE+ when its C-grade limits better match the installed equipment and the remaining electrical characteristics are confirmed to match. For new surface-mount designs, the MAX3232ECDR and MAX3232CDBR use smaller packages and should be treated as redesign candidates rather than physical drop-ins. Before approving any substitution, compare the complete numbered pinout, charge-pump capacitor requirements, supply current, receiver thresholds, operating temperature, and ESD ratings in the manufacturer documentation.

대체품과의 비교

파라미터 이 제품 MAX232AEPE+ MAX232EPE+ MAX232CPE+
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Package 16-pin PDIP 16-pin PDIP 16-pin PDIP 16-pin PDIP
Device Type Dual RS-232 transceiver Dual RS-232 transceiver Dual RS-232 transceiver Dual RS-232 transceiver
Transmitter and Receiver Count 2 transmitters and 2 receivers 2 transmitters and 2 receivers 2 transmitters and 2 receivers 2 transmitters and 2 receivers
Maximum Data Rate 120 kbps 120 kbps 120 kbps 120 kbps
Supply Voltage 5 V 5 V 5 V 5 V
Temperature Grade E grade A grade E-grade ordering variant C grade
Mounting Style Through-hole PDIP Through-hole PDIP Through-hole PDIP Through-hole PDIP

주요 차별점

  • Maintains the MAX232E 2/2 RS-232 architecture in a serviceable through-hole package (vs MAX3232ECDR)
  • Provides a wider industrial temperature option in the same 16-pin PDIP footprint (vs MAX232EPE+)
  • Combines 5 V operation with 15 kV ESD-protected RS-232 interfaces (vs MAX232CPE+)

설계 노트

Place all charge-pump capacitors and the supply-bypass capacitor directly beside their associated MAX232EEPE+ pins. Keep the traces short, use the shortest practical ground return, and avoid routing charge-pump nodes beneath long RS-232 connector traces. The manufacturer datasheet’s recommended capacitor values and PCB layout should control the final implementation because incorrect values can alter startup behavior or increase line-transition noise.

Do not treat the MAX232EEPE+ as a TTL-level RS-232 driver. The transmitters produce the bipolar voltage levels required by RS-232, while the receivers accept those cable-side levels and convert them to logic. Confirm whether each channel is connected for transmit, receive, or full-duplex operation, and verify that the DB9 connector pin assignment matches the board’s routing rather than assuming a universal connector convention.

Keep the connector-side RS-232 traces away from clocks, switching-regulator outputs, relay coils, and high-current return paths. Provide a direct chassis or signal-ground path to the connector, but avoid routing surge current through sensitive logic ground. When long or outdoor cables are unavoidable, evaluate an external transient-protection network and controlled ESD discharge path so that cable transients do not repeatedly stress the interface pins.

The MAX232EEPE+ is a linear interface IC rather than a power semiconductor, so a Safe Operating Area chart is not applicable. Nevertheless, the 5 V supply current dissipates power in the device. Provide adequate copper and ventilation around the 16-pin PDIP, and keep the assembly within the selected grade’s ambient-temperature limits. Use the A-grade alternative when the E-grade operating range cannot cover the enclosure temperature.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The product is a commercial RS-232 interface IC; no AEC-Q100 automotive qualification is identified. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or current compliance documentation.

데이터 검증일: 2026-11-17 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

MAX232EEPE+ datasheet MAX232EEPE+ pinout MAX232EEPE+ datasheet pdf MAX232EEPE+ equivalent MAX232EEPE+ replacement MAX232EEPE+ cross reference MAX232EEPE+ 16-PDIP MAX232EEPE+ 120kbps MAX232EEPE+ 15kV ESD Analog Devices MAX232EEPE+ MAX232EEPE+ vs MAX232AEPE+ MAX232EEPE+ price MAX232EEPE+ stock MAX232EEPE+ RS-232 transceiver

관련 부품 & 용어

Analog Devices MAX232EEPE+ MAX232AEPE+ MAX232EPE+ MAX232CPE+ MAX3232ECDR MAX3232CDBR RS-232 RS-232 transceiver line driver line receiver interface IC TTL CMOS EIA/TIA-232E CCITT V.28 charge-pump voltage generator 120 kbps 15 kV ESD protection 16-pin PDIP DIP package through-hole package surface mount RS-232 port 5 V power supply industrial control point-of-sale equipment test and measurement
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기