Analog Devices

MAX232EWE+ - Dual RS-232 Transceiver, 5V | Maxim

MPN: MAX232EWE+ ✓ Aktif
4.5 V to 5.5 V Vdss 16-pin SOIC Package
MOQ: 1 |

MAX232EWE+ Genel Bakış

The Maxim Integrated MAX232EWE+ is a +5 V-powered, dual RS-232 transceiver with two drivers and two receivers, a maximum data rate of 120 kbps, and a 4.5 V to 5.5 V supply range. The device is packaged in a 16-pin SOIC and is designed for bidirectional RS-232 level translation between a modern CMOS or TTL-based system and an RS-232 port.

An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 voltage levels and converts incoming RS-232 signals back into logic-compatible levels. In the product hierarchy, the MAX232EWE+ is a dual line transceiver within the broader RS-232 interface IC and semiconductor categories. Its two driver and two receiver channels allow one connector to carry two independent RS-232 data paths, reducing the number of interface components required in multi-channel equipment.

The principal operating characteristics are a 4.5 V to 5.5 V supply range, 120 kbps maximum data rate, two transmitters, two receivers, CMOS-compatible logic, and a 16-pin SOIC package. The E in the EWE package code identifies the manufacturer’s specified package variant, while the plus suffix denotes the current ordering designation shown in the product listings. The wide SOIC package measures 7.50 mm across the width dimension stated in the product record.

The MAX232 family uses integrated charge-pump circuitry to generate the positive and negative voltage levels required by RS-232. Those levels allow the interface to overcome the voltage thresholds and noise margin associated with unbalanced, single-ended communications. Because the device includes both transmit and receive functions, each logical channel can use one driver and one receiver when full-duplex point-to-point communication is required.

Typical uses include industrial serial-control equipment, test and measurement instruments, data acquisition systems, point-of-sale terminals, and embedded control systems that expose an RS-232 port. It is most appropriate where a legacy RS-232 interface must coexist with a 5 V CMOS or TTL control platform. USB-to-RS-232 conversion is another possible use when the host controller already provides UART-compatible logic signals.

PCB layout should keep the interface and charge-pump components close to the device and should route the RS-232 traces away from sensitive analog and high-speed digital signals. Decoupling capacitors must follow the capacitor-selection and layout guidance in the manufacturer datasheet. Before substituting a different transceiver, verify the complete pinout, supply range, driver and receiver counts, maximum data rate, logic thresholds, and connector-side voltage levels rather than relying on package dimensions alone.

This page organizes the MAX232EWE+ specifications, practical design considerations, application guidance, and qualified drop-in alternatives into an engineering-focused reference. It also distinguishes the known channel, speed, voltage, and package characteristics from parameters that require confirmation in the manufacturer datasheet before production release.

Drop-in alternatifler için MAX232EWE+ — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller MAX232EWE+ (aynı form faktörü ve ayağa oturma) — farklı olan Interface Standard, Product Type, Package, Number of Drivers, Number of Receivers.

Analog Devices
Interface Standard: RS-232; EIA/TIA-232E and V.28/V.24 family application
Product Type: RS-232 line driver/receiver transceiver
Package: 16-pin wide SOIC
İle Karşılaştır MAX232EWE+ →
Analog Devices
Interface Standard: EIA/TIA-232E, V.28, and V.24
Product Type: RS-232 line-driver and receiver transceiver
Package: 16-pin wide SOIC (WSOIC)
İle Karşılaştır MAX232EWE+ →
Texas Instruments
Interface Standard: TIA/EIA-232-F and ITU Recommendation V.28
Product Type: Dual RS-232 driver/receiver with capacitive voltage generator
Number of Drivers: 2
İle Karşılaştır MAX232EWE+ →

MAX232CWE+

✅ Yerleştirme
Analog Devices
📦 16-SOIC
RS-232 line driver/receiver transceiver · 4.5 V to 5.5 V · 2 · 2 · RS-232; EIA/TIA-232E and V.28/V.24 family application · Dual RS-232 transmitter · Dual RS-232 receiver · CMOS/TTL-compatible digital interface

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MAX232CWE+T

✅ Yerleştirme
Analog Devices
📦 16-SOIC
RS-232 line-driver and receiver transceiver · 2 · 2 · Full duplex · 120 kbps · +5 V · EIA/TIA-232E, V.28, and V.24 · 16-pin wide SOIC (WSOIC)

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MAX232DW

✅ Yerleştirme
Texas Instruments
📦 16-SOIC wide
Dual RS-232 driver/receiver with capacitive voltage generator · 2 · 2 · 120 kbit/s · 5 V · 4.5 V to 5.5 V · Approximately ±9 V · ±30 V

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MAX233ACWP-T

✅ Yerleştirme
📦 16-SOIC wide
Same 2 drivers, 2 receivers, 5 V supply, and 120 kbps rate; the compared core ratings differ by 0%, but receiver behavior differs.

📋 Katalogda Olmayan Referans Alternatifi

MAX232EWE

✅ Yerleştirme
📦 16-SOIC
Same 2 drivers, 2 receivers, 5 V supply, and 120 kbps rate; the compared core ratings differ by 0%, while the ordering suffix differs.

📋 Katalogda Olmayan Referans Alternatifi

MAX232EWE+ Özellikler

Product Type Dual RS-232 transceiver
Interface Standard RS-232
Supply Voltage Range 4.5 V to 5.5 V
Nominal Supply Voltage 5 V
Number of Drivers 2 channels
Number of Receivers 2 channels
Maximum Data Rate 120 kbps
Logic Technology CMOS
Transceiver Configuration 2 transmitter and 2 receiver channels
Paket 16-pin SOIC
Package Width 7.50 mm
Pin Sayısı 16 pins
Montaj Türü Surface mount

MAX232EWE+ 7.50 mm Pin Yapısı Kılavuzu

MAX232EWE+ (7.50 mm paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.

7.50 mm paket pin çizelgesi için MAX232EWE+

Ayrıntılı pin çıkış verisi mevcut değil: MAX232EWE+.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

MAX232EWE+ için uygundur 6 uygulamas: Industrial Serial Control Ports, Test and Measurement Instruments, Data Acquisition Systems, Point-of-Sale and Retail Terminals, USB-to-RS-232 Adapter Electronics, Embedded Control and Service Interfaces.

🏭

Industrial Serial Control Ports

The MAX232EWE+ is appropriate for industrial equipment that must expose one or two RS-232 control ports to a legacy controller. Its two drivers and two receivers support paired point-to-point channels, while the 120 kbps maximum rate is more than sufficient for command, configuration, and diagnostic traffic. Operating from a 4.5 V to 5.5 V supply allows the interface to sit alongside 5 V CMOS or TTL digital logic. The product is used between the host UART or logic-level connector and an external DE-9 or DB-style RS-232 connector. Protection against industrial surge and ESD events must be handled at the connector and power-entry architecture rather than assumed from the logic-side specifications.

🖥️

Test and Measurement Instruments

The MAX232EWE+ can provide a simple RS-232 control link for laboratory instruments, programmable supplies, and automated test equipment. Two transmitters and two receivers allow the instrument to maintain separate command and response channels when the system requires independent hardware paths. Its 120 kbps data-rate capability supports typical instrument-control protocols without demanding a high-speed differential interface. The 5 V supply range matches common embedded control platforms, and the 16-pin SOIC package permits straightforward assembly on a mixed-signal instrument board. Designers should keep the RS-232 side away from precision analog sections and follow the manufacturer’s recommended capacitor placement to minimize charge-pump and digital coupling.

📟

Data Acquisition Systems

The MAX232EWE+ fits legacy data-acquisition equipment that must transfer measurement-control information over RS-232. Two RS-232 channels can connect separate instruments or support bidirectional communication when each channel uses one transmitter and one receiver. The 120 kbps ceiling is suitable for many low- and moderate-rate acquisition-control protocols, although it does not determine the final throughput of a particular command set. A 4.5 V to 5.5 V operating range allows the transceiver to share power with suitable control electronics. For installations with long cables or noisy industrial environments, use a protected connector path and validate the complete system against the receiver thresholds defined in the manufacturer datasheet.

🖨️

Point-of-Sale and Retail Terminals

The MAX232EWE+ can bridge a 5 V embedded controller in a point-of-sale terminal to an RS-232 peripheral such as a scanner, printer, or customer display. The device’s two drivers and two receivers permit two peripheral connections when the system architecture assigns separate transmit and receive paths. Its 120 kbps maximum data rate comfortably covers common peripheral-control traffic, while the CMOS-compatible logic side avoids requiring older bipolar interface levels internally. Designers should account for ESD exposure at externally accessible connectors, isolate the interface from noisy switching supplies, and keep the charge-pump capacitors close to the device. The enclosure and cable arrangement will often determine real-world reliability more than the logic-side UART implementation.

🔌

USB-to-RS-232 Adapter Electronics

The MAX232EWE+ is useful in USB-to-RS-232 adapter hardware where a USB controller provides a UART-compatible logic interface to the converter. The two transmitters and two receivers can support both a primary port and an additional auxiliary channel, subject to the USB bridge’s pin and protocol support. The MAX232EWE+ operates from 4.5 V to 5.5 V and handles up to 120 kbps, covering common serial-port adapter data rates. Its wide 16-pin SOIC package provides adequate routing flexibility between the digital controller and the connector area. For a production adapter, verify USB-to-UART voltage levels, select the connector-side protection strategy, and follow the layout guidance that keeps switching and high-speed USB traces away from the RS-232 network.

🧩

Embedded Control and Service Interfaces

The MAX232EWE+ can preserve a service or diagnostic connector on an embedded control system while the main board uses modern digital interfaces. Its two-channel arrangement allows service commands to be separated from another RS-232 function, and the 120 kbps rate is appropriate for firmware logs, configuration exchanges, and diagnostic protocols. Because the transceiver is powered from a 4.5 V to 5.5 V rail, the design must ensure the host logic and the interface share compatible levels. Firmware should also handle electrical noise and unexpected connector states at the software layer. A separate protection network and careful ground-return arrangement remain necessary when the service port is exposed to users or connected to longer field cables.

What is the MAX232EWE+ and what are its key specifications?
The MAX232EWE+ is a +5 V-powered, dual RS-232 transceiver with two drivers, two receivers, and a maximum data rate of 120 kbps. According to the manufacturer datasheet and product listings, it operates from a 4.5 V to 5.5 V supply and is offered in a 16-pin SOIC package measuring 7.50 mm in width. The device is intended for bidirectional conversion between CMOS or TTL logic levels and RS-232 signal levels.
Where can I download the MAX232EWE+ datasheet PDF?
The MAX232EWE+ datasheet PDF can be opened through the manufacturer-hosted datasheet link listed for this product. The search results also identify the document as the +5 V-powered, multichannel RS-232 drivers and receivers datasheet. Use the manufacturer datasheet for the authoritative pin-description table, charge-pump capacitor values, electrical characteristics, and application circuit before finalizing a PCB.
Where can I find the MAX232EWE+ pinout?
The MAX232EWE+ pinout is found in the pin-description table of the manufacturer datasheet. The component uses a 16-pin SOIC, so its diagram must contain all 16 numbered terminals and should be checked in counter-clockwise order with pin 1 identified by the package marker. The searchable web listing does not reproduce individual terminal names, so the individual pin assignments remain [DATA_NEEDED: pin names] on this page.
What is the supply voltage range of the MAX232EWE+?
The MAX232EWE+ operates from 4.5 V to 5.5 V, making it a nominal 5 V interface device. According to the MAX232EWE+ technical listing, this supply range supports CMOS-based systems whose I/O levels are compatible with the transceiver’s digital interface. The design must maintain the supply within this range during normal operation and use the bypass and charge-pump capacitor arrangement specified by the manufacturer.
How many RS-232 drivers and receivers does the MAX232EWE+ contain?
The MAX232EWE+ contains two RS-232 drivers and two RS-232 receivers. According to the manufacturer datasheet description, this configuration supports dual-channel transceiver use and allows a system to implement two point-to-point RS-232 links when each channel is assigned a driver and receiver pair. A full-duplex design therefore requires both the transmit and receive paths to be connected.
What is the maximum data rate of the MAX232EWE+?
The MAX232EWE+ supports data rates up to 120 kbps. The MAX232 family comparison identifies both the MAX232EWE and MAX232CWE as 120 kbps RS-232 transceivers, while the product listing describes the MAX232EWE+ as a two-driver, two-receiver device. The 120 kbps ceiling should be treated as the interface design limit and not as a substitute for the complete timing and loading conditions in the datasheet.
Can the MAX232EWE+ replace a MAX232CWE+?
The MAX232CWE+ is identified as a terminal- and package-consistent replacement candidate for the MAX232EWE+, so it can be considered when its electrical limits and temperature requirements match the target design. Cross-reference information reports the same principal operating figures: 5 V operation, two drivers, two receivers, and 120 kbps. A production substitution still requires checking the exact pinout, temperature range, and manufacturer lifecycle status.
What is the best drop-in replacement for the MAX232EWE+?
The best drop-in replacement depends on the required temperature range, package dimensions, and whether the alternate device has any functional difference. Cross-reference records identify the MAX232CWE+, MAX232CWE+T, MAX232DW, and MAX233ACWP-T as candidates for comparison, with the MAX232CWE+T specifically described as having consistent terminals and packages. Select only the candidate whose complete electrical characteristics and environmental requirements satisfy the original design.
What can replace the MAX232EWE+ in an RS-232 interface?
The MAX232CWE+ is a direct replacement candidate because it retains two drivers, two receivers, 120 kbps operation, 5 V supply, and compatible terminals and packages. The MAX232DW is another wide-SOIC option listed with the same 120 kbps rate and two-channel architecture. Verify the exact package drawing and temperature grade before substituting either part into an existing PCB.
When should I choose the MAX232EWE+ over the MAX232CWE+?
Choose the MAX232EWE+ when the original design was qualified for its specified operating-temperature range and when maintaining the established E-series sourcing configuration is important. Choose the MAX232CWE+ when its documented temperature range covers the deployment environment and its lifecycle status remains acceptable. Both parts use the same core RS-232 architecture, so temperature qualification and availability should drive the final decision.
Is the MAX232EWE+ suitable for industrial serial communication equipment?
The MAX232EWE+ is suitable for a 5 V industrial serial interface when the temperature, surge, and EMC requirements are satisfied at the system level. Its two RS-232 channels and 120 kbps maximum rate support control, diagnostic, and configuration ports commonly found in industrial equipment. The enclosure, cable, connector, isolation, and surge-protection design remain system responsibilities and should be verified for the installation environment.
What are the key MAX232EWE+ specifications engineers should know?
The key MAX232EWE+ specifications are a 4.5 V to 5.5 V supply range, two RS-232 drivers, two receivers, and a maximum data rate of 120 kbps. The device uses CMOS logic and comes in a 16-pin SOIC package with a stated width of 7.50 mm. According to the manufacturer datasheet description, these characteristics place it in the class of multichannel +5 V-powered RS-232 interface transceivers.
What is the difference between the MAX232EWE+ and MAX233ACWP-T?
The MAX232EWE+ and MAX233ACWP-T both appear in the same wide-SOIC RS-232 comparison family and share the 2-driver, 2-receiver, 5 V, 120 kbps core operating figures. Their relevant distinction is the receiver behavior and secondary device-specific characteristics described in their respective datasheets. Confirm those functional differences, along with package dimensions and temperature ratings, before treating the MAX233ACWP-T as a drop-in replacement.
Where can I buy the MAX232EWE+ and check its current price?
Use the Request a Quote form on this page to request the current MAX232EWE+ price, stock position, lead time, and order quantity. The form is the appropriate route for an up-to-date commercial commitment because inventory and commercial terms can change independently of the technical record. No fixed price should be inferred from the searchable distributor listings.
Is the MAX232EWE+ in stock and what is its lead time?
The searchable listing indicates that the MAX232EWE+ is currently offered by multiple supply channels, but it does not provide a dependable stock quantity or production lead-time commitment for a specific order. Request the current availability and lead time through the Request a Quote form on this page. For new production builds, also request a date code and lot traceability rather than relying only on generic marketplace availability.

Mühendislik referans verileri: MAX232EWE+ — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the MAX232EWE+ when the design needs a +5 V-powered, dual-channel RS-232 interface in the established 16-SOIC footprint and the product’s specified operating-temperature range suits the deployment. The MAX232CWE+ is a strong alternative when its temperature grade and lifecycle status satisfy the project and either procurement preference or supply continuity favors that ordering code. MAX232CWE+T is described as terminal- and package-consistent, but the ordering suffix should be checked against the required manufacturing format. MAX232DW offers the same stated wide-SOIC core ratings and is suitable when its full datasheet conditions match. Consider MAX233ACWP-T only after reviewing its different receiver behavior. For any substitution, verify the pinout, temperature range, supply limits, logic thresholds, data rate, and charge-pump capacitor requirements. The selected device must also satisfy the system’s ESD, surge, isolation, cable-length, and grounding requirements.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün MAX232CWE+ MAX232CWE+T MAX232DW MAX233ACWP-T MAX232EWE
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC wide 16-SOIC wide 16-SOIC
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Supply Voltage 4.5 V to 5.5 V 5 V 5 V 5 V 5 V 5 V
Number of Drivers 2 2 2 2 2 2
Number of Receivers 2 2 2 2 2 2
Maximum Data Rate 120 kbps 120 kbps 120 kbps 120 kbps 120 kbps 120 kbps
RS-232 Transceiver Configuration Full RS-232 RS-232 transceiver RS-232 transceiver Dual transmitter and receiver Dual transmitter and receiver 2 drivers and 2 receivers

Ana Farklılayıcılar

  • Provides two complete RS-232 channels in one 16-SOIC device (karşılaştırma:MAX232EWE)
  • Supports a maximum data rate of 120 kbps (karşılaştırma:MAX232CWE+)
  • Matches the principal ratings of the wide-SOIC MAX232DW (karşılaştırma:MAX232DW)

Tasarım Notları

Place the charge-pump capacitors and supply bypass capacitor close to their associated MAX232EWE+ pins, following the manufacturer datasheet schematic and loop guidance. Keep the capacitor connections short and place them on the same PCB side as the device where practical. Route the RS-232 driver and receiver nets toward the connector while separating them from sensitive analog inputs, clock signals, and switching-power circuits.

Preserve the device’s ground return and route RS-232 signals as a differential pair of conductors in the physical cable even though the interface signals themselves are single-ended. At the PCB connector, keep the logic-side ground and cable-side return path continuous. Avoid long stubs between the transceiver and connector, and place any external protection network directly at the connector entry so surge current is not forced through traces around the IC.

Do not treat matching the SOIC body width as sufficient proof of drop-in compatibility. Before replacing the MAX232EWE+, verify every pin name, the 4.5 V to 5.5 V supply range, the 120 kbps operating limit, operating-temperature grade, logic thresholds, receiver behavior, and the required charge-pump capacitors. The MAX233ACWP-T has a different receiver behavior even though its principal channel-count, voltage, and data-rate ratings align.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The searchable product records do not state a definitive compliance result for the exact MAX232EWE+ ordering code. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status from the current manufacturer documentation before release.

Veri doğrulanma tarihi: 2026-11-09 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

max232ewe datasheet MAX232EWE+ datasheet pdf MAX232EWE+ pinout MAX232EWE+ specifications MAX232EWE+ equivalent MAX232EWE+ replacement MAX232EWE+ cross reference MAX232EWE+ vs MAX232CWE+ MAX232EWE+ 16-SOIC footprint MAX232EWE+ RS-232 application circuit MAX232EWE+ price MAX232EWE+ stock

İlgili Bileşenler ve Terimler

Analog Devices Maxim Integrated MAX232EWE+ MAX232CWE+ MAX232CWE+T MAX232DW MAX233ACWP-T RS-232 RS-232 transceiver dual line transceiver interface IC semiconductor CMOS TTL UART charge-pump circuit RS-232 driver RS-232 receiver 120 kbps 4.5 V to 5.5 V supply 16-SOIC SOIC family surface-mount package industrial serial communication data acquisition
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle