Analog Devices

MAX3232ICAE - 3.0-5.5V 1Mbps RS-232 Transceiver | ADI

MPN: MAX3232ICAE ✓ Aktif
3.0 V to 5.5 V Vdss 16-SSOP Package
MOQ: 1 |

MAX3232ICAE Genel Bakış

The Analog Devices MAX3232ICAE is a low-power, true RS-232 transceiver designed for single-supply operation from 3.0 V to 5.5 V, with a maximum data rate of 1 Mbps. The device is packaged in a 16-pin SSOP and is identified by Analog Devices as a production part. It provides the voltage-level conversion required between a modern CMOS or low-voltage TTL serial interface and a ±RS-232 line, allowing legacy ports, industrial equipment, and service interfaces to remain accessible through a compact transceiver.

An RS-232 transceiver is an interface IC within the broader hierarchy of communication transceivers, serial-interface controllers, interface ICs, and integrated circuits. Unlike RS-485 and RS-422 links, true RS-232 uses single-ended signaling with bipolar voltage levels and full-duplex point-to-point communication. The MAX3232ICAE therefore fits the driver-and-receiver role between a UART and a DB9, RJ45-style serial connector, or custom RS-232 cabling.

The MAX3232 family's headline characteristics are its 3.0 V to 5.5 V supply range, 1 Mbps maximum signaling rate, and low-power operation. The MAX3232E family documented on the same Analog Devices product page adds ±15 kV ESD protection and reduces supply current to as low as 10 nA, while the MAX3232ICAE designation represents the original MAX3232 variant rather than the E-enhanced version. Charge-pump circuitry provides the bipolar transmit voltage required by RS-232 without requiring a separate negative supply.

Typical applications include industrial control consoles, programmable-logic-controller service ports, test and measurement equipment, point-of-sale terminals, and embedded systems that retain a legacy serial interface. The 16-pin SSOP keeps the design compact, while the 3.0 V minimum supply allows operation from 3.3 V systems without a 5 V-only supply requirement. Designers should still allow correct charge-pump capacitor selection and external protection for the cable-connected pins.

When laying out the board, place the charge-pump capacitors and the VCC bypass capacitor close to their associated pins, and route driver outputs away from sensitive receiver inputs. Keep RS-232 traces short where possible and provide chassis-ground or surge-protection measures according to the cable environment. Interface protection is distinct from the internal ESD characteristics of the MAX3232E version, so the selected ordering code must match the protection requirement for the end product.

This page brings together the manufacturer specifications, package details, verified drop-in alternatives, application guidance, and layout considerations in one engineering reference. It also distinguishes the original MAX3232ICAE from the ESD-enhanced MAX3232E and documents which replacement parts preserve the same 16-pin SSOP footprint.

Drop-in alternatifler için MAX3232ICAE — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller MAX3232ICAE (aynı form faktörü ve ayağa oturma) — farklı olan Maximum Data Rate, Package, Supply Voltage Range.

MaxLinear
Maximum Data Rate: 250 kbit/s
Package: 16-SSOP (0.209, 5.30 mm Width)
Supply Voltage Range: +3.0 V to +5.5 V

MAX3232ECAE+

✅ Yerleştirme
Analog Devices
📦 16-SSOP
RS-232 transceiver · 2 transmitters · 2 receivers · 3.0 V to 5.5 V · 1 Mbps · ±15 kV · Down to 10 nA · 4 × 0.1 µF

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MAX3232ICAE+

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 16-SSOP
Same MAX3232 family electrical ratings with the + ordering suffix; confirm RoHS-compliant suffix availability against the original MAX3232ICAE

📋 Katalogda Olmayan Referans Alternatifi

SP3232EBCA-L/TR

✅ Yerleştirme
MaxLinear
📦 16-SSOP
RS-232 transceiver · 2 · 2 · +3.0 V to +5.5 V · 250 kbit/s · 15 kV · 0.1 µF · RS-232

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MAX3232ECAE-TUDI

✅ Yerleştirme
📦 16-SSOP
Same MAX3232E-family electrical function in a distributor-coded ordering variant; the MAX3232E adds ±15 kV ESD protection versus the original MAX3232 family

📋 Katalogda Olmayan Referans Alternatifi

MAX3232ICAE Özellikler

Product Type RS-232 transceiver
Supply Voltage Range 3.0 V to 5.5 V
Maximum Data Rate 1 Mbps
Interface Standard True RS-232
Pin Sayısı 16 pins
Paket 16-SSOP
Montaj Türü Surface mount
Yaşam Döngüsü Durumu Production
RoHS Durumu unknown
REACH Status unknown

MAX3232ICAE 16-ssop Pin Yapısı Kılavuzu

MAX3232ICAE (16-ssop paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.

16-ssop paket pin çizelgesi için MAX3232ICAE

Ayrıntılı pin çıkış verisi mevcut değil: MAX3232ICAE.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

MAX3232ICAE için uygundur 6 uygulamas: Industrial Control Console, PLC and Equipment Service Port, Test and Measurement Instrument, Point-of-Sale and Retail Terminal, Embedded UART Expansion, Network Equipment Maintenance Port.

🏭

Industrial Control Console

The MAX3232ICAE is appropriate for an industrial controller that retains a legacy RS-232 service port while its main processing runs on 3.3 V logic. Its 3.0 V to 5.5 V operating range removes the need for a 5 V-only transceiver, and the family's 1 Mbps capability supports substantially faster data transfer than a conventional limited-speed RS-232 device. Install the transceiver between the UART pins and the connector-side protection network, then keep the charge-pump and bypass capacitors close to the device. External surge protection remains important because connector-side transients can exceed the capabilities of the original MAX3232 variant.

🔧

PLC and Equipment Service Port

A programmable-logic-controller or machine-tool service connector can use the MAX3232ICAE to translate a 3.3 V UART into true bipolar RS-232 signals without a separate negative supply. The 1 Mbps maximum rate gives designers headroom for diagnostic protocols and firmware-transfer routines, while the compact 16-SSOP keeps the interface away from the connector. Route the driver and receiver nets as a matched pair, provide a solid ground reference, and apply the connector protection scheme recommended by the equipment manufacturer. Validate the supported temperature range before using the part in continuously operating industrial machinery.

🖥️

Test and Measurement Instrument

The MAX3232ICAE suits laboratory instruments that expose a PC-style serial interface for calibration, logging, or remote control. Operating from 3.0 V to 5.5 V simplifies integration with mixed-voltage test boards, and the MAX3232 family's 1 Mbps capability supports high-volume data transfer. Place the transceiver close to the UART rather than the connector so the sensitive logic-side nets remain short, and position external protection at the connector entry. Because test equipment may be connected to untrusted cables, evaluate the MAX3232E ESD-rated variant or a dedicated surge-protection network when a specified withstand level is required.

🖨️

Point-of-Sale and Retail Terminal

A point-of-sale terminal or peripheral can use the MAX3232ICAE to connect a low-voltage controller to a legacy RS-232 cash drawer, reader, or service connector. The 3.0 V minimum operating voltage supports 3.3 V system rails, and the 1 Mbps family capability is more than adequate for short command and response transactions. Use a continuous ground conductor alongside the RS-232 signal pair and provide protection at the user-accessible connector. For compact handheld designs, the 16-SSOP footprint reduces board area, but verify the assembled height and lead clearance against the enclosure and connector mechanics.

🧩

Embedded UART Expansion

The MAX3232ICAE is useful when a modern embedded controller has a logic-level UART but must communicate with a RS-232-equipped sensor, gateway, or service unit. Its single-supply operation from 3.0 V to 5.5 V reduces the power tree compared with older dual-polarity RS-232 designs, and the 1 Mbps maximum rate supports high-speed logging. Connect the transceiver to the controller through short UART traces, observe the manufacturer's charge-pump capacitor recommendations, and isolate the connector side from sensitive analog or clock circuitry. Confirm whether the system requires the original MAX3232 characteristics or the enhanced ESD protection of the MAX3232E family.

🌐

Network Equipment Maintenance Port

Router, switch, and modem chassis often retain an RS-232 maintenance connection for installation and emergency diagnostics. The MAX3232ICAE can provide that port from a 3.3 V system without a separate RS-232 power rail, and its 1 Mbps capability supports rapid firmware download and diagnostic output. Keep the UART connection short, place connector-side protection at the chassis entry, and maintain a low-impedance return path for the interface ground. In a chassis exposed to service personnel, an ESD-rated MAX3232E variant or a dedicated protection device is generally easier to justify than relying on the original MAX3232 interface alone.

What is the MAX3232ICAE used for?
The MAX3232ICAE is a true RS-232 transceiver used to connect a UART or other logic-level serial controller to a cable-based RS-232 port. It performs the voltage conversion between low-voltage digital signals and bipolar RS-232 levels. According to the Analog Devices MAX3232 product documentation, the device operates from 3.0 V to 5.5 V and supports signaling rates up to 1 Mbps, making it suitable for legacy serial ports, equipment service interfaces, and industrial control links.
What are the key specifications of MAX3232ICAE?
The MAX3232ICAE operates from 3.0 V to 5.5 V, supports a maximum RS-232 data rate of 1 Mbps, and is offered in a 16-pin SSOP package. The Analog Devices MAX3232 family is identified as a production, low-power, true RS-232 transceiver. The MAX3232ICAE is the original MAX3232 variant; the related MAX3232E family adds ±15 kV ESD protection and operation down to 10 nA, so the ordering code should be selected according to the required protection level.
Where can I download the MAX3232ICAE datasheet PDF?
The official MAX3232 datasheet and supporting documentation are available from the Analog Devices MAX3232 product page at https://www.analog.com/en/products/max3232.html. Use the Data Sheet link on that page for the MAX3232 family, then confirm that the ordering table includes the MAX3232ICAE 16-SSOP configuration. The manufacturer also lists a MAX3232E data sheet for the ESD-enhanced E variant; that document contains useful family-level application information but should not be used to assume that the I suffix provides the same protection rating.
Where can I find the MAX3232ICAE pinout?
The MAX3232ICAE pin assignment is defined in the pin-description table of the official MAX3232 family data sheet, available from the Analog Devices MAX3232 product page. Because the exact terminal numbering is not reproduced on the distributor pages used for this listing, consult the manufacturer diagram before assigning PCB tracks. Also confirm the 16-SSOP footprint rather than assuming that the similarly named SOIC and TSSOP ordering codes have identical lead geometry.
Is the MAX3232ICAE a 3.3 V compatible RS-232 transceiver?
Yes, the MAX3232ICAE can operate from a 3.0 V to 5.5 V supply, which includes a standard 3.3 V rail. Its RS-232 driver still produces the bipolar voltage levels required by the standard, so the low-voltage supply does not limit the interface to CMOS signal levels. Analog Devices specifies the MAX3232 family for operation up to 1 Mbps. Confirm the exact operating-temperature and supply-current limits in the manufacturer data sheet before using it in a temperature-constrained product.
What is the difference between MAX3232ICAE and MAX3232ECAE+?
The principal difference is ESD robustness: the MAX3232ECAE+ belongs to the MAX3232E family, which Analog Devices describes as ±15 kV ESD-protected, while the MAX3232ICAE is the original MAX3232 variant. Both families support a 3.0 V to 5.5 V supply and rates up to 1 Mbps, and the MAX3232ECAE+ is offered in a 16-SSOP package. Use the E version when the interface requires a specified high-energy ESD rating; otherwise evaluate the original version against the complete system requirement.
What is the best drop-in replacement for MAX3232ICAE?
The MAX3232ECAE+ is the closest documented same-package replacement because it retains a 16-SSOP configuration, 3.0 V to 5.5 V operation, and 1 Mbps performance while adding the ESD-protected MAX3232E feature set. Cross-reference information also identifies SP3232EBCA-L/TR as a pin-compatible alternative. Because protection ratings and shutdown behavior differ between device families, treat either replacement as a design review item rather than an automatic substitution: compare ESD rating, supply current, and exact lead dimensions.
Can MAX3232ECAE+ replace MAX3232ICAE?
The MAX3232ECAE+ can generally serve as a drop-in replacement for MAX3232ICAE when the board uses the 16-SSOP footprint and the application does not depend on a non-E-specific function. It maintains the 3.0 V to 5.5 V supply range and 1 Mbps data rate, while adding the MAX3232E family's ±15 kV ESD protection. Confirm package dimensions, capacitor recommendations, and shutdown-pin behavior against the manufacturer data sheet before releasing production artwork.
When should I choose MAX3232ICAE over an ESD-enhanced MAX3232E?
Choose the MAX3232ICAE when the interface is short, protected at the connector by a separate surge-protection network, or managed by a system whose ESD requirements are already satisfied. Choose the MAX3232E variant when exposed cables require a higher-rated interface IC or when lower supply current in shutdown modes is important. Both families cover a 3.0 V to 5.5 V supply and up to 1 Mbps, so the decision should focus on protection, power management, package availability, and validated system behavior.
Is MAX3232ICAE suitable for industrial equipment?
The MAX3232ICAE is suitable for many industrial serial interfaces because the MAX3232 family supports true RS-232 signaling at rates up to 1 Mbps from a 3.0 V to 5.5 V supply. Industrial suitability also depends on the available temperature grade, ESD requirements, isolation strategy, and connector-side surge protection. Use the MAX3232E option when a defined ±15 kV ESD rating is required, and confirm the ordering code's temperature range in the official data sheet.
What can replace MAX3232ICAE?
A valid replacement must match the 16-SSOP footprint and preserve the RS-232 electrical function, supply range, and baud-rate capability. The MAX3232ECAE+ is the closest same-family choice, adding the MAX3232E family's ±15 kV ESD protection while retaining 3.0 V to 5.5 V operation and up to 1 Mbps signaling. SP3232EBCA-L/TR is a documented pin-compatible alternative. Validate lead dimensions, capacitor values, shutdown logic, and ESD performance before substituting either part.
Is MAX3232ICAE the same as MAX3232ECAE?
No, the ordering codes identify different family variants. MAX3232ECAE+ is the MAX3232E version with ±15 kV ESD protection and low-power shutdown capability, while MAX3232ICAE is the original MAX3232 variant. Both provide true RS-232 operation from 3.0 V to 5.5 V at rates up to 1 Mbps and use 16-pin SSOP ordering options, but their ESD and power-management characteristics must be compared before interchangeability is assumed.
Where can I buy MAX3232ICAE online?
Use the Request a Quote form on this page to request MAX3232ICAE pricing, stock confirmation, and current lead time. The form connects the request directly with XAIPART's sales operation and avoids relying on an outdated listing figure. For technical confirmation, use the Analog Devices MAX3232 product page and the manufacturer data sheet to verify the 16-SSOP configuration, supply range, and lifecycle status.
What is the price of MAX3232ICAE?
Current MAX3232ICAE pricing is supplied through the Request a Quote form on this page rather than embedded in the technical description. Submit the required quantity, packaging preference, and target delivery date so the sales team can return a current quotation and availability confirmation. The manufacturer lists the MAX3232 family as a production product, but lifecycle status alone does not establish current stock, lead time, or transaction pricing.
What is the lead time for MAX3232ICAE?
Request the current lead time through the Request a Quote form on this page, including your annual usage, order quantity, and required ship date. Analog Devices identifies the MAX3232 family as production, which supports long-term sourcing, but present lead time depends on inventory, manufacturing schedules, package configuration, and order volume. The Request a Quote response provides the actionable date for the specific order rather than a generic lifecycle estimate.
Is MAX3232ICAE in stock?
Current stock for MAX3232ICAE should be confirmed through the Request a Quote form on this page. Include the required quantity, reel or tube preference, and target delivery date so XAIPART can verify available inventory and scheduling. The manufacturer lists the MAX3232 family as production, but a production lifecycle status does not by itself confirm local stock for every package suffix or customer schedule.

Mühendislik referans verileri: MAX3232ICAE — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the MAX3232ICAE when the design requires a compact, single-supply true RS-232 interface at rates up to 1 Mbps and the original MAX3232 feature set is sufficient. Choose the MAX3232ECAE+ when the connector is exposed to user-accessible cables or the design needs the MAX3232E family's ±15 kV ESD rating and shutdown current down to 10 nA. SP3232EBCA-L/TR is worth evaluating as a documented pin-compatible second source, but its supply-current, protection, and capacitor recommendations must be checked before release. MAX3232ECAE-TUDI offers the same MAX3232E electrical class through a distributor-specific code and should be selected for traceability or regional sourcing rather than for a functional difference. In every case, verify the exact 16-SSOP footprint, operating-temperature grade, external protection, and connector grounding before PCB release.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün MAX3232ECAE+ MAX3232ICAE+ SP3232EBCA-L/TR MAX3232ECAE-TUDI
Brand Analog Devices Analog Devices Analog Devices MaxLinear Analog Devices
Package 16-SSOP 16-SSOP 16-SSOP 16-SSOP 16-SSOP
Interface Standard True RS-232 True RS-232 True RS-232 RS-232 True RS-232
Pin Compatibility 16-SSOP reference footprint Pin compatible Same-family package configuration Pin compatible Same MAX3232E family footprint

Ana Farklılayıcılar

  • Original MAX3232 option for cost-sensitive interfaces without an E-series ESD requirement (karşılaştırma:MAX3232ECAE+)
  • Documented pin-compatible cross-brand sourcing path (karşılaştırma:SP3232EBCA-L/TR)
  • Compact 16-SSOP implementation with 1 Mbps family performance (karşılaştırma:MAX3232ECAE-TUDI)

Tasarım Notları

Place the flying charge-pump capacitors and the VCC bypass capacitor directly beside their associated MAX3232ICAE pins, with the shortest possible ground-return path. Route the UART-side nets away from the RS-232 driver outputs to prevent the high-voltage driver transitions from coupling into the receiver or controller pins. Use the manufacturer pin-description and layout example for the 16-SSOP footprint, because SSOP, TSSOP, and SOIC lead dimensions must not be treated as interchangeable.

Treat the RS-232 connector as an electromagnetic and ESD entry point. Keep external protection or series impedance close to the connector, maintain a continuous signal-ground reference, and avoid long unprotected stubs. The MAX3232ICAE is the original MAX3232 variant rather than the ±15 kV ESD-enhanced MAX3232E, so a separate protection strategy may be necessary for user-accessible cables. Verify the selected variant's protection rating against the finished-product immunity requirement.

Do not substitute the MAX3232ICAE with MAX3232E, MAX3232IPWR, or MAX3232ECDR solely because their descriptions appear similar. The E suffix identifies enhanced ESD and power-management characteristics, while the package suffix determines whether the board uses SSOP, TSSOP, or SOIC geometry. Confirm the exact ordering code, lead pitch, exposed dimensions, charge-pump capacitor recommendations, and shutdown-pin function in the official data sheet before changing a released PCB.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The manufacturer product page confirms production status and the MAX3232 family's electrical characteristics. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not present in the retrieved source pages and are therefore recorded as unknown rather than inferred from the ordering suffix.

İlgili Aramalar

MAX3232ICAE datasheet MAX3232ICAE datasheet pdf MAX3232ICAE pinout Analog Devices MAX3232ICAE MAX3232ICAE equivalent MAX3232ICAE replacement MAX3232ICAE cross reference MAX3232ICAE vs MAX3232ECAE+ MAX3232ICAE 16-SSOP footprint MAX3232ICAE 3.3V RS-232 MAX3232ICAE 1Mbps transceiver MAX3232ICAE price MAX3232ICAE stock MAX3232ICAE industrial RS-232 MAX3232ICAE charge pump capacitors

İlgili Bileşenler ve Terimler

Analog Devices MAX3232ICAE MAX3232ECAE+ SP3232EBCA-L/TR MAX3232E RS-232 true RS-232 transceiver RS-232 transceiver communication transceiver serial interface IC UART single-supply transceiver charge-pump capacitor ESD protection bipolar signaling 16-SSOP SSOP package family surface-mount package 1 Mbps data rate 3.0 V to 5.5 V operating voltage industrial control test and measurement equipment point-of-sale terminal RoHS REACH
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle