Analog Devices

MAX3243CUI+T - 3/5 250kbps RS-232 Transceiver | Analog Devices

MPN: MAX3243CUI+T ✓ Aktif
3 V to 5.5 V Vdss 1 µA Id TSSOP-28 Package
MOQ: 1 |

MAX3243CUI+T Genel Bakış

Analog Devices MAX3243CUI+T is a 3-driver, 5-receiver full-duplex RS-232 interface transceiver operating from 3 V to 5.5 V, with data rates up to 250 kbps and protection to ±15 kV ESD, housed in a 28-pin TSSOP package.

An RS-232 transceiver is an interface integrated circuit that converts logic-level signals into RS-232 voltage levels and converts incoming RS-232 signals back into digital logic. The MAX3243 belongs to the transceiver family within the broader hierarchy of interface ICs, communication semiconductors, and integrated circuits. It is particularly useful where several serial ports share a limited connector or enclosure and low supply current is important.

Key features include three RS-232 drivers, five RS-232 receivers, 3 V to 5.5 V operation, and data rates up to 250 kbps. AutoShutdown circuitry detects whether valid receiver activity is present and disables the on-board supply and drivers when the port is inactive. The manufacturer describes a supply current as low as 1 µA during shutdown, making the device suitable for power-conscious embedded and portable equipment. A complementary always-active receiver supports external monitoring in selected applications.

The MAX3243 supports both 3.3 V and 5 V system rails. This operating range permits the same transceiver to interface with modern low-voltage CMOS controllers as well as established 5 V logic. Its integrated charge-pump circuitry supports the positive and negative RS-232 voltage levels required by the interface standard, while the ±15 kV ESD rating strengthens protection against cable-connected electrostatic discharge events.

Typical uses include industrial control systems, serial-port adapters, test equipment, point-of-sale terminals, data-acquisition equipment, and embedded console interfaces. In a multiport installation, the three drivers can support three outbound channels while five receivers provide inbound monitoring. Designers should nevertheless confirm the required channel direction, electrical standard, connector protection, and system grounding for each cable interface.

For layout, place the device close to the connector and route RS-232 traces away from clocks, switching nodes, and sensitive analog inputs. Keep the transmit and receive paths arranged to minimize differential crosstalk, follow the manufacturer’s recommended charge-pump capacitor connections, and provide local supply bypassing. The ±15 kV rating is a device-level specification and does not replace appropriate cable, connector, and board-level protection.

This page combines the MAX3243 family specifications, verified ordering information, same-footprint alternatives, and practical interface-design guidance. It also distinguishes confirmed drop-in candidates from alternatives that require pinout and signal-direction review before use in an existing 28-pin TSSOP design.

Drop-in alternatifler için MAX3243CUI+T — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller MAX3243CUI+T (aynı form faktörü ve ayağa oturma) — farklı olan Product Type, Package, Supply Voltage Range, Number of Drivers, Number of Receivers.

Analog Devices
Product Type: 2/2 transceiver, full RS-232
Package: 16-pin TSSOP
Supply Voltage Range: 3.0 V to 5.5 V
İle Karşılaştır MAX3243CUI+T →
Analog Devices
Package: 28-pin TSSOP
Supply Voltage Range: 3.0 V to 5.5 V
Number of Drivers: 3 drivers
İle Karşılaştır MAX3243CUI+T →
Analog Devices
Product Type: RS-232 transceiver interface IC
Package: 28-pin TSSOP
Supply Voltage Range: +3 V to +5.5 V
İle Karşılaştır MAX3243CUI+T →
Analog Devices
Product Type: RS-232 transceiver
Package: 28-pin TSSOP
Supply Voltage Range: +3 V to +5.5 V
İle Karşılaştır MAX3243CUI+T →
Maxim Integrated
Product Type: 3-driver/5-receiver full-duplex RS-232 transceiver
Package: 28-pin TSSOP
İle Karşılaştır MAX3243CUI+T →

MAX3243EUI+T

✅ Yerleştirme
Maxim Integrated
📦 TSSOP-28
3-driver/5-receiver full-duplex RS-232 transceiver · 3 V to 5.5 V · 250 kbps · 3 drivers · 5 receivers · ±15 kV · 1 µA · 28-pin TSSOP

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MAX3243CAI+T

✅ Yerleştirme
📦 SSOP-28
Same MAX3243 family, 3 V to 5.5 V supply, and documented replacement relationship; package-body dimensions must be checked against the TSSOP-28 footprint

📋 Katalogda Olmayan Referans Alternatifi

MAX3243CUI+

✅ Yerleştirme
Analog Devices
📦 TSSOP-28
3.0 V to 5.5 V · 250 kbps · ±15 kV · 3 drivers · 5 receivers · 1 µA · 28-pin TSSOP · 3/5 full-duplex configuration

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MAX3232EEUE+T

✅ Yerleştirme
Analog Devices
📦 TSSOP-28
Dual RS-232 transceiver · 2 channels · 2 channels · 3.0 V to 5.5 V · 1 Mbps · ±15 kV · 10 nA · 4 capacitors

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MAX3232CUE+T

✅ Yerleştirme
Analog Devices
📦 TSSOP-28
2/2 transceiver, full RS-232 · 3.0 V to 5.5 V · 1 Mbps · 2 · 2 · 4 × 0.1 µF · 16-pin TSSOP · Surface mount

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MAX3243CUI+T Özellikler

Product Type 3-driver, 5-receiver RS-232 transceiver
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 250 kbps
Driver Count 3
Receiver Count 5
Duplex Mode Full duplex
ESD Protection ±15 kV
Shutdown Supply Current 1 µA
Low-Voltage Operation 3.3 V compatible
Paket TSSOP-28
Montaj Türü Surface mount
Power Management Feature AutoShutdown
Always-Active Receiver Complementary always-active receiver
Yaşam Döngüsü Durumu Active

MAX3243CUI+T tssop-28 Pin Yapısı Kılavuzu

MAX3243CUI+T (tssop-28 paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.

tssop-28 paket pin çizelgesi için MAX3243CUI+T

Ayrıntılı pin çıkış verisi mevcut değil: MAX3243CUI+T.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

MAX3243CUI+T için uygundur 6 uygulamas: Industrial Serial Control Interface, Multiport Serial Adapter, Test and Measurement Equipment, Point-of-Sale Terminal, Data Acquisition Equipment, Embedded Console and Debug Port.

🏭

Industrial Serial Control Interface

The MAX3243CUI+T fits industrial equipment that requires several RS-232 channels without allocating separate interface ICs. Its three drivers and five receivers support three outbound control paths and multiple inbound status-monitoring paths, while 3 V to 5.5 V operation accommodates both legacy 5 V controllers and modern 3.3 V embedded processors. The 250 kbps maximum data rate is suitable for configuration links, service ports, and supervisory communication. The ±15 kV ESD rating adds useful device-level protection on exposed serial connectors, although it does not eliminate the need for a suitable cable shield, chassis grounding, and connector selection.

🔧

Multiport Serial Adapter

A multiport serial adapter can use the MAX3243CUI+T to consolidate several communication channels into a compact controller board. Three RS-232 drivers handle outbound traffic, while five receivers provide additional inputs for monitoring, status, or handshake signals. The 28-pin TSSOP package supports dense equipment layouts, and the 3 V to 5.5 V supply range simplifies adaptation across different embedded platforms. AutoShutdown is valuable in adapters that remain connected but transmit intermittently because the device can reduce supply current to 1 µA when no valid receiver activity is detected.

📺

Test and Measurement Equipment

The MAX3243CUI+T is appropriate for test and measurement instruments that expose RS-232 command, trigger, or status interfaces to a host computer. Its five receivers permit several status or acknowledgment lines to be observed, while three drivers support outbound command channels. Operation from 3 V to 5.5 V lets the transceiver coexist with modern test-controller logic, and the 250 kbps rate is suitable for many legacy serial-control protocols. Layout should keep the RS-232 traces away from high-impedance analog inputs and switching nodes to reduce coupling into measurement results.

📱

Point-of-Sale Terminal

Point-of-sale terminals often combine service-port communication with peripheral status lines, making the MAX3243CUI+T’s three transmitters and five receivers practical. The interface can support printer, display, scanner, or service connections when the channel directions match the system architecture. Its ability to operate from 3.3 V or 5 V supports both embedded Linux-class controllers and legacy terminal electronics. Because external cables can carry electrostatic discharge toward the equipment, the interface should be paired with appropriate connector grounding and system-level surge protection in addition to the device’s ±15 kV ESD rating.

🖥️

Data Acquisition Equipment

Data-acquisition equipment can use the MAX3243CUI+T for configuration and supervisory links between a host and remote measurement hardware. Five receiver channels provide room for command acknowledgments, module-status indicators, or multi-axis control signals, while three drivers support outbound requests. The 250 kbps limit is well suited to many configuration protocols and short control exchanges rather than continuous high-bandwidth transfer. Place the transceiver near the serial connector and isolate its return path from sensitive measurement inputs to prevent common-impedance and radiated-noise coupling into the acquisition section.

🌐

Embedded Console and Debug Port

The MAX3243CUI+T can support an embedded console, maintenance port, or debug interface in industrial and communications equipment. Three drivers allow the host to address multiple downstream devices, while five receivers can collect acknowledgments, reset requests, or configuration responses. AutoShutdown helps minimize consumption when the console cable is absent, and 3 V to 5.5 V operation allows use with a broad range of embedded processors. Designers should preserve the device’s recommended charge-pump capacitor placement and keep connector-side traces physically separated from sensitive clock and high-speed digital routes.

What is the MAX3243CUI+T?
The MAX3243CUI+T is a 3-driver, 5-receiver, full-duplex RS-232 transceiver from Analog Devices. It operates from 3 V to 5.5 V, supports data rates up to 250 kbps, provides ±15 kV ESD protection, and uses a 28-pin TSSOP package. According to the MAX3243 manufacturer datasheet, AutoShutdown reduces supply current to 1 µA when valid receiver activity is absent.
What is the operating voltage of MAX3243CUI+T?
The MAX3243CUI+T operates from 3 V to 5.5 V, supporting both 3.3 V and 5 V systems. The Analog Devices MAX3243 family datasheet identifies the device as a true 3 V to 5.5 V RS-232 transceiver. This range allows the same interface circuit to connect with low-voltage CMOS controllers and conventional 5 V logic when signal-level compatibility is otherwise satisfied.
How many RS-232 drivers and receivers does MAX3243CUI+T have?
The MAX3243CUI+T provides three RS-232 drivers and five RS-232 receivers in one full-duplex interface IC. The Analog Devices product page identifies the MAX3243 as a 3-driver, 5-receiver device and notes a complementary always-active receiver for external monitoring. This channel mix supports three outbound serial paths while providing five inbound sensing or monitoring paths.
What data rate does MAX3243CUI+T support?
The MAX3243CUI+T supports RS-232 data rates up to 250 kbps. The Texas Instruments MAX3243 product page identifies the family as a 3 V to 5.5 V multichannel 250 kbps line driver and receiver. Actual application throughput can be lower when cable length, protocol framing, character timing, and parity requirements are included.
Does MAX3243CUI+T support 3.3 V logic?
Yes, the MAX3243CUI+T supports operation from a 3 V supply and is specified for 3 V to 5.5 V operation. According to the manufacturer datasheet, this makes the device appropriate for 3.3 V systems as well as 5 V designs. The host controller, connector-side interface, and signal levels must still be checked against the complete system requirements.
Where can I download the MAX3243CUI+T datasheet PDF?
The MAX3243CUI+T datasheet can be obtained from the official Analog Devices MAX3243 product page linked in the datasheet field on this page. The manufacturer page provides family documentation, ordering information, and technical resources. Use the MAX3243 datasheet’s pin-description and typical-circuit sections to confirm all 28 TSSOP connections and charge-pump capacitor values.
Where can I find the MAX3243CUI+T pinout?
The MAX3243CUI+T pinout is documented in the manufacturer’s MAX3243 datasheet under the pin-description section. The device uses a 28-pin TSSOP package, and its assignments include the RS-232 drivers, receivers, supply, ground, and charge-pump connections. Use that table when assigning PCB tracks because receiver and driver channels are not interchangeable.
What can replace MAX3243CUI+T?
The MAX3243EUI+T is a close same-family replacement candidate, while MAX3243CAI+T and MAX3243CUI+ appear in documented cross-reference comparisons. The strongest choice depends on package dimensions, temperature grade, and channel requirements. Confirm the exact pin table, driver direction, AutoShutdown behavior, and connector-side voltage levels before treating any candidate as a drop-in replacement.
Is MAX3232EEUE+T a drop-in replacement for MAX3243CUI+T?
The MAX3232EEUE+T is a documented 28-pin comparison candidate, but it belongs to a different MAX3232 series and should not be treated as automatically interchangeable. Its channel count, shutdown implementation, and receiver arrangement may differ from the three-driver, five-receiver MAX3243CUI+T. Compare the manufacturer pin descriptions and verify every connected net before approving it as a replacement.
When should I choose MAX3243CUI+T over a MAX3232 device?
Choose the MAX3243CUI+T when the design needs three transmit drivers and five receive or monitoring channels in one 3 V to 5.5 V RS-232 device. A MAX3232-family part may be appropriate when fewer channels are required or its specific shutdown and receiver functions better match the system. The selection should be based on channel direction, pin assignments, data rate, and shutdown behavior rather than package name alone.
Is MAX3243CUI+T suitable for industrial serial equipment?
The MAX3243CUI+T is suitable for many industrial serial interfaces because it combines a 3 V to 5.5 V supply range, three drivers, five receivers, 250 kbps operation, and ±15 kV ESD protection. For factory equipment, verify the exact operating-temperature grade and add appropriate cable and connector protection. Industrial suitability also depends on grounding, surge requirements, and enclosure-level isolation.
How much power does MAX3243CUI+T use?
The MAX3243CUI+T can reach a shutdown supply current of 1 µA when AutoShutdown detects no valid receiver activity. Active consumption depends on supply voltage, channel activity, load, and the number of operating drivers. The Analog Devices MAX3243 datasheet notes that the on-board supply and drivers shut down when no valid receiver signal is detected, reducing standby demand in intermittently connected systems.
Where to buy MAX3243CUI+T online?
Use the “Request a Quote” form on this page to ask for MAX3243CUI+T availability, order quantities, and delivery scheduling. The required ordering code is the 28-pin TSSOP tape-and-reel version designated MAX3243CUI+T. A purchase request should include the target quantity, shipping destination, and any required production or traceability documentation.
What is the price and lead time of MAX3243CUI+T?
Submit the MAX3243CUI+T part number and required quantity through the “Request a Quote” form on this page for current price, stock, minimum-order quantity, and lead time. Pricing and delivery schedules can vary with order volume, packaging, destination, and market conditions, so the quote form is the appropriate source for a transaction-ready response rather than a static price claim.
Is MAX3243CUI+T in stock?
Current MAX3243CUI+T stock should be confirmed through the “Request a Quote” form on this page. Include the quantity and required delivery date so the order response can distinguish immediate fulfillment from scheduled production. The “+T” ordering suffix identifies the tape-and-reel package, which should be included in the requested line item.
What are the key specifications of MAX3243CUI+T that engineers should know?
The MAX3243CUI+T combines three drivers, five receivers, 3 V to 5.5 V operation, 250 kbps data rate, ±15 kV ESD protection, and a 28-pin TSSOP package. AutoShutdown can reduce supply current to 1 µA when no valid receiver activity is detected. The manufacturer family documentation also identifies a complementary always-active receiver for external monitoring in applicable designs.

Mühendislik referans verileri: MAX3243CUI+T — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the MAX3243CUI+T for compact 3.3 V or 5 V systems that need three RS-232 transmit channels and five receive or monitoring channels, particularly when AutoShutdown and ±15 kV ESD protection are important. MAX3243EUI+T is the closest same-family candidate, but its documented 120 kbps rating may limit links requiring the target’s 250 kbps capability. MAX3243CAI+T uses a 28-pin SSOP option, so check body dimensions and the PCB footprint before substitution. MAX3232EEUE+T and MAX3232CUE+T may suit simpler channel arrangements, but their MAX3232-series pin assignments must be compared with the MAX3243CUI+T. For every candidate, verify the exact package dimensions, temperature grade, channel direction, shutdown behavior, capacitor network, and all PCB net assignments before production release.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün MAX3243EUI+T MAX3243CAI+T MAX3243CUI+ MAX3232EEUE+T MAX3232CUE+T
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package TSSOP-28 TSSOP-28 SSOP-28 TSSOP-28 TSSOP-28 TSSOP-28
Interface Standard RS-232 RS-232 RS-232 RS-232 RS-232 RS-232

Ana Farklılayıcılar

  • Broader channel count within the MAX3243 family (karşılaştırma:MAX3232EEUE+T)
  • Higher documented family data rate (karşılaştırma:MAX3243EUI+T)
  • Automatic low-power behavior for intermittent links (karşılaştırma:MAX3232CUE+T)

Tasarım Notları

Place the MAX3243CUI+T close to the RS-232 connector and route driver outputs directly toward the protected connector pins. Keep receiver inputs away from switching-node and high-current traces to reduce common-mode coupling. Follow the manufacturer’s charge-pump capacitor configuration exactly because incorrect capacitor placement can increase radiated noise, reduce startup margin, or impair voltage generation.

Treat the three transmit channels as potential EMI sources because RS-232 transitions can have steep edges even at modest data rates. Route each transmit pair together, maintain a continuous ground reference where appropriate, and avoid sharing narrow return paths with analog or digital signal nets. A cable shield connected according to the equipment’s grounding strategy can reduce common-mode noise entering the enclosure.

Provide local supply decoupling at the MAX3243CUI+T and keep the power and ground connections short to the device. The 3 V to 5.5 V operating range supports both 3.3 V and 5 V rails, but the host logic and charge-pump requirements must remain within the manufacturer’s operating conditions. Verify startup and shutdown behavior when the system rail can collapse before the serial connector is disconnected.

Do not assume that every 28-pin RS-232 transceiver has the same channel arrangement. The MAX3243 provides three drivers and five receivers, whereas MAX3232-family devices use different configurations. Before substituting a part, compare every driver, receiver, supply, ground, charge-pump, and enable-related connection in the manufacturer pin-description tables and confirm the package dimensions against the PCB land pattern.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The family is an RS-232 interface IC rather than an automotive-qualified device. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer’s current compliance documentation.

Veri doğrulanma tarihi: 2026-11-17 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

MAX3243CUI+T datasheet MAX3243CUI+T pinout MAX3243CUI+T datasheet pdf MAX3243CUI+T equivalent MAX3243CUI+T replacement MAX3243CUI+T cross reference MAX3243CUI+T TSSOP-28 footprint MAX3243CUI+T 3.3V RS-232 MAX3243CUI+T 250kbps transceiver MAX3243CUI+T industrial serial interface MAX3243CUI+T vs MAX3243EUI+T MAX3243CUI+T price MAX3243CUI+T stock Analog Devices MAX3243CUI+T MAX3243CUI+T AutoShutdown

İlgili Bileşenler ve Terimler

Analog Devices MAX3243CUI+T MAX3243 MAX3243EUI+T MAX3243CAI+T MAX3243CUI+ MAX3232EEUE+T MAX3232CUE+T RS-232 RS-232 transceiver line driver line receiver interface IC communication semiconductor AutoShutdown Always-Active Receiver 3.3 V logic 250 kbps 1 µA shutdown current ±15 kV ESD protection TSSOP-28 TSSOP package surface-mount package charge-pump capacitor industrial serial communication
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle