MAX3385ECAP - 250kbps True RS-232 Transceiver | Analog Devices
MPN: MAX3385ECAP ✓ AktifMAX3385ECAP Genel Bakış
An RS-232 transceiver is an interface integrated circuit that converts between single-ended logic-level signals and the bipolar voltage levels used by RS-232 equipment. A line driver translates logic states into RS-232-compatible outputs, while a line receiver performs the reverse conversion. The MAX3385ECAP integrates one driver and two receivers, commonly described as a 2/3 transceiver, for asymmetric point-to-point communication links.
The MAX3385ECAP supports supply voltages from 3.0V to 5.5V, allowing operation from common 3.3V and 5V systems. Its maximum guaranteed data rate is 250kbps, making it suitable for point-to-point industrial control, instrumentation, data acquisition, and embedded equipment. The 15kV ESD rating strengthens its suitability for connectors and cables exposed to electrostatic discharge.
Its dual charge-pump architecture generates the positive and negative voltages required for true RS-232 output levels without a separate negative supply rail. The manufacturer datasheet states that four 0.1uF capacitors are sufficient for operation from a 3.3V supply. A proprietary low-dropout transmitter output stage helps maintain compliant output levels across the supported supply range while controlling power consumption.
Typical uses include serial configuration ports, test and measurement equipment, industrial controllers, barcode scanners, printers, and external data-acquisition modules. The 20-pin SSOP package supports compact surface-mount layouts, while the combination of 3.0V minimum supply, 250kbps throughput, and 15kV ESD protection makes the device appropriate for short-distance point-to-point links where logic-level UART signaling must cross an RS-232 cable.
Pay attention to charge-pump capacitor placement and signal routing during PCB layout. Keep the charge-pump capacitors close to their associated pins, provide an uninterrupted ground reference beneath the interface, and route driver outputs and receiver inputs away from noisy switching nodes. These measures preserve signal integrity and reduce the chance that charge-pump switching activity will disturb adjacent circuitry.
This product page combines the manufacturer interface specifications, package information, pricing availability, and practical RS-232 design guidance. It also distinguishes confirmed drop-in alternatives from functionally similar devices that require pinout, package, and operating-limit verification before substitution.
Drop-in alternatifler için MAX3385ECAP — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
MAX3385ECAP+
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
MAX3385ECAP Özellikler
| Product Type | 2/3 RS-232 transceiver |
| Supply Voltage Range | 3.0V to 5.5V |
| Maximum Data Rate | 250kbps |
| ESD Protection | 15kV |
| Line Drivers | 1 driver |
| Line Receivers | 2 receivers |
| Interface Standard | True RS-232 |
| Communication Standards | EIA/TIA-232 and V.28/V.24 |
| Charge Pump | Dual charge pump |
| Required Charge Pump Capacitors | 4 x 0.1uF at a 3.3V supply |
| Transmitter Output Stage | Proprietary low-dropout output stage |
| Power Classification | Low-power device |
| Paket | 20-pin SSOP |
| Package Pin Count | 20 pins |
| Terminal Form | Gull wing |
| Package Shape | Rectangular |
| Temperature Grade | Commercial |
MAX3385ECAP rectangular Pin Yapısı Kılavuzu
MAX3385ECAP (rectangular paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.
Ayrıntılı pin çıkış verisi mevcut değil: MAX3385ECAP.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
MAX3385ECAP için uygundur 6 uygulamas: Industrial Controller Serial Port, Test and Measurement Equipment, Data Acquisition Module, Point-to-Point Configuration Port, Printer and Barcode Scanner Interface, Embedded Serial Communications Module.
Industrial Controller Serial Port
The MAX3385ECAP is appropriate for a short-distance RS-232 link between an industrial controller and a service terminal, programming fixture, or external accessory. Its 3.0V to 5.5V supply range supports both 3.3V embedded systems and conventional 5V control electronics, while the guaranteed 250kbps rate supports status polling and configuration transfers. The integrated dual charge pump avoids a separate negative supply, and four 0.1uF capacitors are sufficient at 3.3V. Place the charge-pump capacitors close to the device and maintain a continuous ground return to reduce coupling from the switching charge-pump circuitry.
Önerilen
Test and Measurement Equipment
The MAX3385ECAP can interface a test instrument, data logger, or automated measurement system with a legacy RS-232 controller. A 250kbps maximum data rate provides useful margin for transferring readings and commands, while the 15kV ESD rating is beneficial when the serial port connects to bench equipment or external cables. The 20-pin SSOP package saves board area, although designers should reserve adequate clearance around the connector and transceiver. Verify the required 3.3V or 5V rail, configure the charge-pump capacitors exactly as shown in the manufacturer application circuit, and test the complete cable and grounding arrangement.
Önerilen
Data Acquisition Module
The MAX3385ECAP fits portable and rack-mounted data-acquisition modules that must communicate with a host computer over RS-232. Its low-power 3.0V to 5.5V operation reduces supply complexity, and the dual charge pump provides true RS-232 levels without requiring a negative input rail. At rates up to 250kbps, the interface can carry sampled status and control information efficiently. Keep the receiver path away from motors, relay contacts, and switching regulators, and provide a low-impedance ground connection between the module and host. Select capacitors with adequate DC bias and temperature characteristics for the charge-pump network.
Önerilen
Point-to-Point Configuration Port
The MAX3385ECAP is well suited to firmware-loading, configuration, and maintenance ports where a compact board needs a dedicated RS-232 connection. The 20-pin SSOP footprint supports surface-mount assembly, while operation from a single 3.3V or 5V rail simplifies interface design. Its 250kbps capability allows faster upload and download procedures than a low-speed UART transceiver. Add connector retention and chassis grounding at the product boundary, and avoid long unprotected traces between the IC and connector. The interface's 15kV ESD rating should not be treated as a substitute for a properly engineered enclosure and cable system.
Önerilen
Printer and Barcode Scanner Interface
The MAX3385ECAP can provide the RS-232 electrical interface for a printer, barcode scanner, label reader, or other peripheral using point-to-point serial communication. Its 250kbps maximum rate exceeds the needs of many low-speed scanner protocols, while the 3.0V to 5.5V operating range permits flexible host-logic integration. The integrated dual charge pump eliminates the need for a negative system rail. Confirm signal polarity, handshake support, connector pin assignment, and cable length for the selected peripheral, because protocol compatibility and electrical compatibility are separate requirements. Route the driver output directly toward the connector and keep it away from sensitive receiver traces.
Önerilen
Embedded Serial Communications Module
The MAX3385ECAP can add an RS-232 port to an embedded communications module built around a 3.3V microcontroller or processor. The device bridges UART logic signals to true RS-232 levels, uses a dual charge pump, and requires only four 0.1uF capacitors for 3.3V operation according to the Analog Devices MAX3385E datasheet. This simplifies systems that cannot allocate a negative supply rail. Match the UART logic levels and baud-rate range of the host controller, and follow the manufacturer capacitor placement and routing guidance. For a new layout, evaluate the transceiver near the connector while maintaining separation from switching power and high-current return paths.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: MAX3385ECAP — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün |
|---|---|
| Package | 20-pin SSOP |
| Brand | Analog Devices |
| Product Type | 2/3 RS-232 transceiver |
| Supply Voltage Range | 3.0V to 5.5V |
| Maximum Data Rate | 250kbps |
| ESD Protection | 15kV |
| Line Drivers | 1 driver |
| Line Receivers | 2 receivers |
| Charge Pump | Dual charge pump |
| Charge Pump Capacitors | 4 x 0.1uF at 3.3V supply |
| Interface | True RS-232, EIA/TIA-232 and V.28/V.24 |
| Temperature Grade | Commercial |
Ana Farklılayıcılar
- Higher guaranteed serial throughput (karşılaştırma:MAX3221E)
- Single positive supply with true RS-232 levels (karşılaştırma:ISL83385ECA)
- Specified ESD protection for exposed serial links (karşılaştırma:MAX3232E)
Tasarım Notları
Place the four 0.1uF charge-pump capacitors as close as practical to their associated MAX3385ECAP pins, using short ground returns and the capacitor arrangement shown in the manufacturer datasheet. Keep the copper area beneath the capacitor network compact to limit loop inductance. Confirm that each capacitor retains the intended effective capacitance at the minimum local supply voltage and across the operating temperature range.
Separate the RS-232 driver outputs from receiver inputs and from sensitive analog or low-level digital circuits. Route the unprotected cable side toward the connector, with no unnecessary stubs or test pads in the high-impedance receiver path. Maintain a continuous ground reference beneath the interface and avoid placing the transceiver directly beneath a switching regulator or high-current inductor.
Do not assume that a similar 20-pin RS-232 transceiver is pin-compatible because its driver and receiver counts match. Verify every pin against the MAX3385E datasheet, including charge-pump capacitor pins, receiver enable or fail-safe behavior, supply pins, and ground connections. Also verify the 3.0V to 5.5V supply range, 250kbps rating, and 15kV ESD rating before releasing a substitute part into production.
Uyumluluk Bilgisi
The manufacturer and distributor product records do not state the requested compliance classifications. Use the current Analog Devices product documentation and quality documentation for formal environmental and material-compliance decisions.