Analog Devices

MAX3490ECSA+T - 12Mbps RS-485/RS-422 Transceiver | Analog Devices

MPN: MAX3490ECSA+T ✓ Aktif
3.3 V Vdss RS-485 and RS-422 Rds(on) 8-pin SOIC Package
MOQ: 1 |

MAX3490ECSA+T Genel Bakış

Analog Devices MAX3490ECSA+T is a 3.3 V powered RS-485/RS-422 interface transceiver with one driver and one receiver, a maximum data rate of 12 Mbps, and ±15 kV ESD protection in an 8-pin SOIC package. The integrated slew-rate-limited driver reduces unwanted ringing and electromagnetic interference on long, point-to-point communication links.

An RS-485/RS-422 transceiver is an interface IC that converts between CMOS/TTL logic levels and balanced differential signals. It belongs to the transceiver hierarchy within interface ICs, where differential signaling improves noise immunity and allows reliable communication over longer cable distances than ordinary single-ended logic. The MAX3490E family combines low-power 3.3 V operation, fault-tolerant differential drivers, and enhanced electrostatic-discharge protection for industrial and instrumentation networks.

Key features include operation from a single 3.3 V supply, a 12 Mbps maximum signaling rate, ±15 kV ESD protection on the bus pins, and one transmit and one receive channel per device. The partially slew-rate-limited driver helps control edge rates, reducing reflections and radiated emissions on suitable terminated networks. The receiver provides differential input detection for RS-422 links, while the device can also participate in half-duplex RS-485 networks when its direction-control interface is used correctly.

The MAX3490E series belongs to the MAX3483E family of low-power transceivers. Its internal architecture combines a differential line driver, a differential receiver, bus-direction logic, and protection structures within one compact package. This integration reduces the number of discrete components required for isolated or non-isolated industrial links while preserving a standardized differential bus interface. Designers must still provide appropriate termination, biasing, protection, and grounding for the selected RS-422 or RS-485 topology.

Typical uses include industrial sensor networks, programmable logic controller communication, building-automation equipment, test and measurement instruments, data-acquisition modules, and embedded serial links. It is particularly useful when a compact PCB area, 3.3 V supply, moderate-to-high data rates, and direct-contact ESD robustness are required. The 8-pin SOIC footprint also simplifies assembly in designs already using surface-mount interface components.

Design considerations include placing the transceiver close to the connector, maintaining a continuous ground reference between the logic side and the cable interface, and using the termination method appropriate to the topology. Differential pairs should be routed with consistent geometry, while surge or isolation components may be required when the cable leaves the protected enclosure. Verify signal polarity, driver-enable logic, receiver output levels, and supply sequencing before releasing a new PCB.

This page combines the manufacturer's product specifications, package and interface guidance, comparison criteria, and practical PCB considerations to support faster engineering evaluation of the MAX3490ECSA+T in industrial communications designs.

Drop-in alternatifler için MAX3490ECSA+T — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller MAX3490ECSA+T (aynı form faktörü ve ayağa oturma) — farklı olan Maximum Data Rate, ESD Protection, Driver Type, Package, Supply Voltage.

Analog Devices
Maximum Data Rate: 20 Mbps
ESD Protection: ±20 kV
Driver Type: Slew-rate limited
İle Karşılaştır MAX3490ECSA+T →
Analog Devices
Driver Type: Slew-rate-limited
İle Karşılaştır MAX3490ECSA+T →
Analog Devices
Maximum Data Rate: 12Mbps
ESD Protection: ±15kV
Driver Type: Slew-rate-limited
İle Karşılaştır MAX3490ECSA+T →
Analog Devices
Maximum Data Rate: 10 Mbps
Package: 8-SOIC
İle Karşılaştır MAX3490ECSA+T →

MAX3490EESA+T

✅ Yerleştirme
Analog Devices
📦 8-pin SOIC
RS-485/RS-422 transceiver · 1 transmitter and 1 receiver · 3.0V to 3.6V · 12Mbps · 10Mbps · ±15kV · Slew-rate-limited · True RS-485 and RS-422

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MAX3490AEGSA+T

✅ Yerleştirme
Analog Devices
📦 8-pin SOIC
RS-485/RS-422 transceiver · 3.3 V · 20 Mbps · ±20 kV · 1 driver · 1 receiver · RS-485 and RS-422 · Slew-rate limited

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MAX3483EESA+T

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
Analog Devices
📦 8-pin SOIC
RS-485/RS-422 transceiver · 1 driver and 1 receiver · 3.3 V · 3 V to 3.6 V · 12 Mbps · ±15 kV · Slew-rate-limited true driver · RS-485 and RS-422

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MAX3485EESA+T

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
Analog Devices
📦 8-pin SOIC
1/1 RS-422/RS-485 transceiver · 3V to 3.6V · 12Mbps · ±15kV · 1 driver · 1 receiver · RS-422 and RS-485 · Half-duplex

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MAX3486EESA+T

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 8-pin SOIC
Same MAX3483E-family 3.3 V, 12 Mbps and ±15 kV ESD transceiver class; distinct member-specific logic and pin-function details must be checked.

📋 Katalogda Olmayan Referans Alternatifi

MAX3488EESA+T

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
Analog Devices
📦 8-pin SOIC
RS-485/RS-422 transceiver · 3.3 V · 3 V to 3.6 V · 12 Mbps · ±15 kV · 1 driver · 1 receiver · RS-485 and RS-422

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MAX3490ECSA+T Özellikler

Product Type RS-485/RS-422 transceiver
Besleme Gerilimi 3.3 V
Maximum Data Rate 12 Mbps
ESD Protection ±15 kV
Number of Drivers 1
Number of Receivers 1
Driver Type Slew-rate-limited differential driver
Supported Standards RS-485 and RS-422
Low-Power Operation 3.3 V low-power transceiver
Paket 8-pin SOIC
Montaj Türü Surface mount
Yaşam Döngüsü Durumu Production
Datasheet Revision Rev. 1

MAX3490ECSA+T 8-pin soic Pin Yapısı Kılavuzu

MAX3490ECSA+T (8-pin soic paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.

8-pin soic paket pin çizelgesi için MAX3490ECSA+T

Ayrıntılı pin çıkış verisi mevcut değil: MAX3490ECSA+T.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

MAX3490ECSA+T için uygundur 6 uygulamas: Industrial Sensor Networking, PLC and Factory Automation Communication, Building Automation Equipment, Data Acquisition and Test Equipment, Embedded Serial Communication, Instrumentation and Remote Sensor Links.

🏭

Industrial Sensor Networking

The MAX3490ECSA+T fits 3.3 V industrial sensor links that need one differential transmitter and one receiver in a compact 8-pin SOIC footprint. Its 12 Mbps maximum data rate supports short, high-speed field buses, while the slew-rate-limited driver helps control edge rates and reduce ringing. The ±15 kV ESD rating adds useful protection for bus nodes connected to external wiring. Confirm the required temperature grade and add external surge protection when cables leave the equipment enclosure.

🏭

PLC and Factory Automation Communication

Use the MAX3490ECSA+T as the bus-interface element between a 3.3 V controller and an RS-485 or RS-422 factory network. One integrated driver and receiver support bidirectional half-duplex RS-485 or dedicated RS-422 signaling, while 12 Mbps operation provides ample bandwidth for controller-to-module traffic. The partial slew-rate limitation favors cleaner edges and reduced EMI in cabinet installations. Validate address, biasing, termination, and isolation requirements for the complete bus topology.

🧩

Building Automation Equipment

The MAX3490ECSA+T is appropriate for building-automation controllers, room modules, and field interfaces using balanced RS-485 communication. Its 3.3 V supply supports compact mixed-signal controller boards, and the 8-pin SOIC package preserves PCB area for sensors and communications isolation. Differential signaling improves noise immunity over building wiring, while ±15 kV ESD protection strengthens the interface against charged-contact events. Select termination, common-mode grounding, and surge protection according to the installed cable environment.

🔧

Data Acquisition and Test Equipment

The MAX3490ECSA+T can connect laboratory instruments, automated test systems, and data-acquisition modules to RS-485 or RS-422 controllers. The 12 Mbps rate supports high-throughput instrument traffic over short qualified cables, and the single-channel driver and receiver simplify protocol-specific interfaces. Its compact SOIC package is useful when analog and digital sections compete for board space. Preserve controlled edge rates, use a proper ground reference, and isolate external test leads when operators may contact the chassis.

🖥️

Embedded Serial Communication

The MAX3490ECSA+T adds a robust differential bus port to embedded equipment operating from a 3.3 V rail. One driver and one receiver are sufficient for compact half-duplex RS-485 nodes or point-to-point RS-422 links, avoiding the area required by a larger multi-channel transceiver. The 12 Mbps capability can accommodate fast local links, while controlled slew rates assist signal integrity. Review enable timing and receiver-output behavior against the host UART or communications controller.

📡

Instrumentation and Remote Sensor Links

The MAX3490ECSA+T suits remote sensor and instrumentation links where a compact differential interface is needed close to a cable connector. Its 3.3 V operation reduces system supply complexity, while ±15 kV ESD protection strengthens a frequently exposed interface. The partially slew-rate-limited driver can reduce ringing on correctly terminated cables, although network geometry remains critical. Place the transceiver near the connector, maintain a continuous ground reference, and consider galvanic isolation for long or externally accessible wiring.

What is the MAX3490ECSA+T?
The MAX3490ECSA+T is a 3.3 V, single-driver and single-receiver transceiver for RS-485 and RS-422 differential communications. According to the Analog Devices MAX3490E data sheet, Rev. 1, it supports data rates up to 12 Mbps, includes ±15 kV ESD protection, and is packaged in an 8-pin SOIC. It suits compact industrial links where low supply voltage, differential signaling, and bus-interface robustness are required.
What are the key specifications of MAX3490ECSA+T that engineers should know?
The MAX3490ECSA+T operates from 3.3 V, supports RS-485 and RS-422 communication, and provides one differential driver plus one differential receiver. According to the Analog Devices MAX3490E data sheet, Rev. 1, its maximum data rate is 12 Mbps and its bus pins have ±15 kV ESD protection. The device uses an 8-pin SOIC package and a partially slew-rate-limited driver for controlled signal transitions.
Where can I download the MAX3490ECSA+T datasheet PDF?
The official MAX3490E datasheet and product resources are available from Analog Devices at the MAX3490E product-page URL listed on this page. The manufacturer page identifies the document as Data Sheet Rev. 1 and links to the detailed product information. Use that document to verify pin assignments, electrical characteristics, timing, and recommended application circuits before finalizing the PCB and interface network.
Where can I find the MAX3490ECSA+T pinout?
Use the pin-description table in the Analog Devices MAX3490E data sheet, Rev. 1, to identify all eight connections of the MAX3490ECSA+T. The manufacturer package information identifies an 8-pin SOIC. Assign supply, ground, driver inputs, receiver outputs, enable controls, and differential bus pins directly from the official pin table rather than inferring their functions from another RS-485 device.
What is the difference between MAX3490ECSA+T and MAX3490AEGSA+T?
The MAX3490ECSA+T and MAX3490AEGSA+T are related 8-pin SOIC MAX3490E-family transceivers, but their exact ordering suffixes can denote different grade, temperature, or packaging options. The available comparison identifies differences in compliance and ordering attributes. Check the suffix-specific manufacturer product-selection table before substitution to confirm operating-temperature range, marking, qualification, and production status.
Can MAX3490EESA+T replace MAX3490ECSA+T?
The MAX3490EESA+T can be considered a pin-compatible candidate for the MAX3490ECSA+T because both belong to the MAX3490E family and use the same 8-pin SOIC interface. The available comparison describes their terminal and package arrangements as compatible and their main functional characteristics as consistent. Confirm the exact temperature grade, electrical limits, qualification status, and suffix-specific marking before approving it for production.
When should I choose MAX3490ECSA+T over MAX3490AEGSA+T?
Choose the MAX3490ECSA+T when its suffix-specific operating grade, qualification, compliance, and ordering attributes match the target application. Choose MAX3490AEGSA+T only after comparing those same attributes in the manufacturer product-selection table. Both devices occupy the same 8-pin SOIC footprint and implement the MAX3490E RS-485/RS-422 transceiver function, so package compatibility alone should not determine the final choice.
What is the best drop-in replacement for MAX3490ECSA+T?
The MAX3490EESA+T is the closest documented drop-in candidate in the available cross-reference results, using the same 8-pin SOIC package and corresponding differential interface arrangement. The MAX3490AEGSA+T is another same-family candidate, although ordering-grade differences must be checked. Confirm the manufacturer selection table, temperature range, qualification, and electrical limits before substituting either part.
Is MAX3490ECSA+T suitable for industrial RS-485 equipment?
The MAX3490ECSA+T is suitable for many 3.3 V industrial RS-485 interfaces because it provides one driver, one receiver, 12 Mbps operation, slew-rate-limited signaling, and ±15 kV ESD protection. The Analog Devices MAX3490E data sheet, Rev. 1, places it in the low-power MAX3483E transceiver family. Final suitability depends on the required temperature grade, isolation strategy, cable protection, and regulatory environment.
How should termination be designed for MAX3490ECSA+T links?
Termination must match the cable topology and placement of the receiving endpoints. For point-to-point RS-422 links, the usual approach is a termination resistor at the receiver end, with the exact resistance selected for the cable and receiver impedance. For multidrop RS-485, termination belongs at the two physical ends only. Verify values against the Analog Devices MAX3490E data sheet, Rev. 1, and the complete system wiring.
What are the thermal considerations for MAX3490ECSA+T?
The MAX3490ECSA+T is a low-power 3.3 V interface IC, but its total board heating still depends on supply voltage, termination arrangement, data activity, and the thermal resistance of the assembled PCB. Use the manufacturer's operating-temperature limits and electrical characteristics for design verification. Keep the SOIC away from heat-generating regulators and provide adequate copper area to maintain reliable junction and ambient-temperature conditions.
Is MAX3490ECSA+T compatible with MAX3483E and MAX3488E devices?
The MAX3490ECSA+T belongs to the same MAX3483E family as the MAX3483E, MAX3485E, MAX3486E, MAX3488E, MAX3490E, and MAX3491E devices. According to the Analog Devices MAX3490 product information, these are 3.3 V low-power RS-485 and RS-422 transceivers, each containing one driver and one receiver. Their family relationship supports design comparison, but the exact pin functions and specifications should be checked before interchangeability is assumed.
Where to buy MAX3490ECSA+T online?
Use the Request a Quote form on this page to request the MAX3490ECSA+T and confirm current channel availability, order quantity, and shipment timing. The product is identified as an Analog Devices 8-pin SOIC RS-485/RS-422 transceiver, and the manufacturer lists the MAX3490E series as production. A formal quote is required because current commercial terms can change with quantity and inventory.
What is the price of MAX3490ECSA+T?
Current pricing for the MAX3490ECSA+T is obtained through the Request a Quote form on this page. The exact MPN is listed by major component channels, but commercial terms vary with order quantity, date, and inventory. Submit the required part number, target quantity, and delivery location so the quote can reflect the current configuration without embedding a potentially stale price.
What is the lead time for MAX3490ECSA+T?
The current lead time for the MAX3490ECSA+T should be confirmed with the Request a Quote form on this page. The Analog Devices product page identifies the MAX3490E family as production, which supports ongoing sourcing, but manufacturing and inventory conditions can vary by quantity and date. Provide your required quantity and target delivery schedule with the quote request for an actionable commitment.

Mühendislik referans verileri: MAX3490ECSA+T — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the MAX3490ECSA+T for a compact 3.3 V RS-485 or RS-422 interface that needs one driver, one receiver, operation up to 12 Mbps, and ±15 kV ESD protection in an 8-pin SOIC. Prefer MAX3490EESA+T when the manufacturer selection table confirms that its suffix-specific temperature and qualification attributes better match the design; it is the closest documented drop-in candidate. Consider MAX3490AEGSA+T for the corresponding alternate ordering grade after checking compliance and marking requirements. The MAX3483EESA+T, MAX3485EESA+T, MAX3486EESA+T, and MAX3488EESA+T members share the 3.3 V, 12 Mbps, ±15 kV ESD transceiver class and 8-pin SOIC footprint, but their member-specific enable, receiver, and shutdown functions must be checked before substitution. For any replacement, verify pin functions, operating-temperature range, electrical limits, ESD rating, qualification, and lifecycle status in the manufacturer documentation.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün MAX3490EESA+T MAX3490AEGSA+T MAX3483EESA+T MAX3485EESA+T
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 8-pin SOIC 8-pin SOIC - same package 8-pin SOIC - same package 8-pin SOIC - same package 8-pin SOIC - same package
Function 1/1 RS-485/RS-422 transceiver 1/1 RS-485/RS-422 transceiver 1/1 RS-485/RS-422 transceiver 1/1 MAX3483E-family transceiver 1/1 MAX3483E-family transceiver
Supply Voltage 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V
Maximum Data Rate 12 Mbps 12 Mbps 12 Mbps 12 Mbps 12 Mbps
ESD Protection ±15 kV ±15 kV ±15 kV ±15 kV ±15 kV
Driver and Receiver Count 1 driver, 1 receiver 1 driver, 1 receiver 1 driver, 1 receiver 1 driver, 1 receiver 1 driver, 1 receiver
Slew-Rate-Limited Driver Yes, partial slew-rate limiting Yes, partial slew-rate limiting Yes, partial slew-rate limiting Yes Yes

Ana Farklılayıcılar

  • High-speed differential operation in a compact interface (karşılaştırma:MAX3490EESA+T)
  • Controlled driver edges for cleaner bus transitions (karşılaştırma:MAX3483EESA+T)
  • Direct-contact ESD robustness on external bus nodes (karşılaştırma:MAX3490AEGSA+T)

Tasarım Notları

Place the MAX3490ECSA+T close to the external communication connector so the protected bus pins connect to the cable through a short, controlled path. Keep the logic-side traces away from the bus-side connector and protection components. Maintain a continuous ground reference along the interface, and use a ground-plane connection that does not interrupt the differential signal return path.

Treat the bus as a controlled-impedance differential channel. Terminate only at the locations required by the RS-422 or RS-485 topology, using the value recommended by the manufacturer for the selected network. Avoid long unmatched stubs, maintain consistent pair geometry, and verify edge ringing with an oscilloscope at the intended data rate before increasing cable length or node count.

Do not assume that every member of the MAX3483E family is automatically interchangeable. Confirm the exact driver-enable behavior, receiver polarity, shutdown or enable pins, supply requirements, and bus-pin protection against the manufacturer pin-description table. For RS-485 multidrop networks, also verify fail-safe biasing and ensure that the transceiver is never enabled in a way that conflicts with another transmitter on the bus.

The partial slew-rate limitation can reduce ringing and radiated emissions, but EMI performance still depends on cable length, data pattern, termination, and connector return paths. Keep the differential pair compact and continuous, avoid parallel runs with switching-power nodes, and test the assembled board in its final enclosure with representative traffic. Additional filtering should be selected from measured spectra rather than added indiscriminately.

Although the MAX3490ECSA+T is a low-power 3.3 V transceiver, the complete assembly must remain within the manufacturer's specified operating and junction-temperature limits. Provide exposed PCB copper around the SOIC where practical, avoid placing it immediately beside a regulator hotspot, and account for enclosure temperature rise. Verify worst-case dissipation with the actual supply, termination, loading, and data activity.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The accessible product and comparison information does not provide a definitive compliance statement for this exact ordering suffix. Compliance fields remain unknown pending confirmation in the manufacturer's product-selection table or material declaration.

Veri doğrulanma tarihi: 2026-11-09 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

MAX3490ECSA+T datasheet MAX3490ECSA+T pinout MAX3490ECSA+T datasheet pdf MAX3490ECSA+T equivalent MAX3490ECSA+T replacement MAX3490ECSA+T cross reference MAX3490ECSA+T footprint MAX3490ECSA+T price MAX3490ECSA+T stock Analog Devices MAX3490ECSA+T MAX3490ECSA+T 12Mbps transceiver MAX3490ECSA+T RS-485 application circuit MAX3490ECSA+T vs MAX3490EESA+T

İlgili Bileşenler ve Terimler

Analog Devices MAX3490ECSA+T MAX3490EESA+T MAX3490AEGSA+T MAX3483EESA+T MAX3485EESA+T MAX3486EESA+T MAX3488EESA+T RS-485 RS-422 differential transceiver interface IC CMOS logic slew-rate-limited driver ESD protection 12 Mbps data rate 3.3 V power supply 8-pin SOIC SOIC package family surface-mount package industrial automation building automation test and measurement data acquisition differential signaling
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle