Analog Devices

MAX378EPE+ - 8:1 High-Voltage Fault-Protected Multiplexer

MPN: MAX378EPE+ ✓ Aktif
±4.5 V Vdss 3.5 kΩ Rds(on) 16-pin PDIP Package
MOQ: 1 |

MAX378EPE+ Genel Bakış

The Analog Devices MAX378EPE+ is an 8-channel, single-ended 1-of-8 high-voltage analog multiplexer with fault protection, 3.5 kΩ maximum on-resistance, and a 16-pin PDIP package. It is designed to route high-voltage signals while protecting the system when external supplies are removed before the multiplexer's power rails.

An analog multiplexer is an interface IC that connects one shared signal path to one of several input channels. A 1-of-8 device provides eight selectable inputs, while a fault-protected multiplexer adds internal channel-isolation behavior during abnormal power conditions. The MAX378 belongs to the broader hierarchy of interface ICs, analog switches, multiplexers, and signal-management semiconductors.

Key features include a 1-of-8 configuration, maximum on-resistance of 3.5 kΩ, dual-supply operation from ±4.5 V to ±18 V, maximum on-time of 1 µs, and maximum off-time of 300 ns. The fault-protected architecture uses a series N-channel, P-channel, and N-channel structure. If the power supplies are turned off while input voltages remain present, all multiplexer channels turn off and leakage falls to only a few nanoamperes.

The MAX378 family is intended for instrumentation and data-acquisition systems that must select among multiple high-voltage measurement sources. Its single-ended topology differs from the differential MAX379, which uses four differential channels. For systems using programmable gain, a precision amplifier such as the MAX420 can follow the selected multiplexer output and provide gain correction or amplification.

Typical uses include automated test equipment, data-acquisition units, industrial measurement systems, and laboratory instruments. The ±4.5 V to ±18 V supply range allows operation around zero and bipolar signal ranges when dual supplies are available. The 16-pin PDIP format also simplifies prototype construction and through-hole assembly.

Designers should verify the absolute maximum input and supply ratings, derating strategy, fault-current limits, and pin-specific input restrictions in the manufacturer datasheet before applying external voltages. Supply bypassing should be placed close to the device, and unused control inputs should be driven to defined logic levels rather than left floating.

This product page combines the manufacturer family information with a practical comparison of pin-compatible family variants, interface considerations, application guidance, and design notes. These engineering details help shorten component selection while preserving the need to validate absolute maximum ratings in the final system.

Drop-in alternatifler için MAX378EPE+ — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

MAX378EPE

✅ Yerleştirme
📦 16-PDIP
Retains the 1-of-8 topology, 3.5 kΩ maximum on-resistance and ±4.5 V to ±18 V dual-supply range, a 0% difference in those headline ratings; suffix-specific electrical characteristics require final comparison.

📋 Katalogda Olmayan Referans Alternatifi

MAX378CPE+

✅ Yerleştirme
📦 PDIP-16
Matches the 1-of-8 configuration, 3.5 kΩ maximum on-resistance, ±4.5 V to ±18 V supplies, 1 µs on-time and 300 ns off-time; minimum operating temperature changes from -40 °C to 0 °C.

📋 Katalogda Olmayan Referans Alternatifi

MAX378EPE+ Özellikler

Product Type 8-channel, single-ended analog multiplexer
Multiplexer Configuration 1-of-8
Number of Circuits 1 circuit
Maximum On-Resistance 3.5 kΩ
Minimum Dual Supply Voltage ±4.5 V
Maximum Dual Supply Voltage ±18 V
Maximum On-Time 1 µs
Maximum Off-Time 300 ns
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +85 °C
Power-Off Fault Leakage A few nA
Internal Channel Structure Series N-channel/P-channel/N-channel structure
Paket 16-pin PDIP
Montaj Türü Through-hole
Product Lifecycle PRODUCTION

MAX378EPE+ 16-pin pdip Pin Yapısı Kılavuzu

MAX378EPE+ (16-pin pdip paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.

16-pin pdip paket pin çizelgesi için MAX378EPE+

Ayrıntılı pin çıkış verisi mevcut değil: MAX378EPE+.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

MAX378EPE+ için uygundur 6 uygulamas: Automated High-Voltage Test Systems, Data-Acquisition Systems, Industrial Signal Conditioning, Laboratory Instrumentation, Battery and Power-System Monitoring, Programmable Signal Routing.

🖥️

Automated High-Voltage Test Systems

The MAX378EPE+ fits automated test equipment that routes one of eight high-voltage measurement sources into a common signal chain. Its 1-of-8 configuration reduces the number of separate analog input paths, while the 3.5 kΩ maximum on-resistance provides a defined basis for calculating source loading and measurement sensitivity. The 1 µs maximum on-time and 300 ns maximum off-time support controlled channel selection during sequential tests. Fault protection is especially useful when an external source can remain energized while the instrument supply changes. Use the exact pin description and address-control truth table from the manufacturer datasheet when assigning the eight channels and digital selection inputs.

📊

Data-Acquisition Systems

The MAX378EPE+ can select up to eight single-ended inputs in a multi-channel data-acquisition system. A common architecture places the multiplexer in front of a precision amplifier and analog-to-converter, reducing the number of high-performance conversion channels required. The 3.5 kΩ maximum on-resistance must be included in the source-impedance and gain-error budget, especially for high-impedance sensors. The device's ±4.5 V to ±18 V dual-supply range supports systems that measure bipolar signals. Its fault-protected behavior helps isolate the downstream chain when an input remains driven after the acquisition board loses power, subject to the published absolute maximum ratings.

🏭

Industrial Signal Conditioning

The MAX378EPE+ is appropriate for industrial signal-conditioning equipment that must select among several externally wired voltage sources. The 8:1 single-ended architecture can consolidate sensor inputs, reference channels, or diagnostic points into one downstream measurement path. Operation from -40 °C to +85 °C supports temperature-controlled industrial enclosures, while the ±4.5 V to ±18 V supply range accommodates bipolar biasing. Because the maximum on-resistance is 3.5 kΩ, input buffering requirements depend on sensor impedance and measurement accuracy. Protective grounding, current limiting, and overvoltage protection remain external to the multiplexer and should be sized independently for each industrial input.

🔬

Laboratory Instrumentation

The MAX378EPE+ can front-end a laboratory instrument that compares multiple high-voltage test points or programmable sources. A single multiplexed path simplifies the analog routing structure, while a precision amplifier can provide the required gain after selection. The 16-pin PDIP package is convenient for through-hole laboratory prototypes and removable instrument boards. Switching performance includes a 1 µs maximum on-time and 300 ns maximum off-time, allowing the instrument controller to sequence channels with settling time handled in software. Designers should account for the 3.5 kΩ maximum on-resistance when calculating attenuation and noise, and should use the manufacturer's timing and charge-injection specifications when setting acquisition windows.

🔋

Battery and Power-System Monitoring

The MAX378EPE+ is suitable for multi-rail or battery-test equipment that must measure several voltage points through a shared analog channel. The single-ended 1-of-8 topology is useful for pack taps, balancing points, charger outputs, and diagnostic rails. The ±4.5 V to ±18 V dual-supply capability supports bipolar test arrangements, while fault protection reduces unintended coupling when a monitored node remains energized during a power transition. The 3.5 kΩ maximum on-resistance can add loading to high-impedance dividers, so divider values should be selected accordingly. Thermal design must ensure that external fault current and power-dissipation conditions remain within the device's absolute maximum ratings.

⚡

Programmable Signal Routing

The MAX378EPE+ enables programmable routing among eight external signal sources when a system requires one measurement or processing chain to be reused across multiple inputs. Digital address inputs can direct the common terminal to the selected channel, while the enable control determines whether the path is active. The 1 µs maximum on-time and 300 ns maximum off-time are useful when sequencing tests quickly, although the controller should include settling time for the 3.5 kΩ maximum on-resistance and downstream capacitance. For zero-centered or bipolar signals, the ±4.5 V to ±18 V supply range supplies the required operating headroom. Confirm logic thresholds, address mapping, and all absolute maximum input conditions in the manufacturer datasheet.

Önerilen Ürünler Özeti

MAX420 Precision amplifier used for programmable gain and gain correction Kullanıldığı Yer: Automated High-Voltage Test Systems, Data-Acquisition Systems, Industrial Signal Conditioning, Laboratory Instrumentation, Battery and Power-System Monitoring, Programmable Signal Routing MAX378EPE Same-family 1-of-8 high-voltage multiplexer Kullanıldığı Yer: Automated High-Voltage Test Systems ADS1262IPW Texas Instruments Kullanıldığı Yer: Data-Acquisition Systems, Industrial Signal Conditioning, Laboratory Instrumentation, Battery and Power-System Monitoring, Programmable Signal Routing
What is the MAX378EPE+ used for?
The MAX378EPE+ is an 8-channel, single-ended 1-of-8 analog multiplexer with fault protection for high-voltage measurement and data-acquisition systems. According to the Analog Devices MAX378 product page, it uses a series N-channel/P-channel/N-channel structure that turns all channels off when the supplies are removed while input voltages remain applied. This architecture limits fault leakage to a few nanoamperes and helps protect downstream circuitry.
How many channels does the MAX378EPE+ have?
The MAX378EPE+ provides eight input channels arranged as a single-ended 1-of-8 multiplexer. According to the Analog Devices MAX378 family information, the MAX378 is the single-ended member, whereas the related MAX379 provides four differential channels. The MAX378EPE+ is supplied in a 16-pin PDIP package, giving the device an 8:1 routing configuration for connecting multiple analog sources to one common output.
What is the on-resistance of the MAX378EPE+?
The MAX378EPE+ has a maximum on-resistance of 3.5 kΩ. According to the manufacturer product listing, this is the key resistance presented by the selected analog channel. The device can also turn all channels off within a maximum off-time of 300 ns, while its maximum on-time is 1 µs. These switching figures should be considered together with capacitance, source impedance, settling time, and the required measurement accuracy.
What supply voltage does the MAX378EPE+ require?
The MAX378EPE+ operates from ±4.5 V to ±18 V when configured with dual supplies. According to the MAX378 family specifications, this permits bipolar signal routing around ground and supports measurement systems operating at higher positive and negative voltages. The allowed input range remains a separate absolute-maximum consideration, so engineers should not assume that every accepted multiplexed signal can safely approach the supply limits.
Where can I download the MAX378EPE+ datasheet PDF?
The official MAX378 datasheet and product information are available from the Analog Devices product page at https://www.analog.com/en/products/max378.html. The page identifies MAX378 as an 8-channel, high-voltage, fault-protected multiplexer and provides the manufacturer Data Sheet, Rev. 1. Use the pin-description table, absolute-maximum-rating table, and typical application circuit in that document when assigning PCB tracks and defining the operating envelope.
Where can I find the MAX378EPE+ pinout?
The MAX378EPE+ pin assignment is defined in the official MAX378 manufacturer datasheet under the pin-description table. The component uses a 16-pin PDIP package with through-hole mounting. Because the complete pin names and control truth table are not included in the product-page material, use the manufacturer document to identify the common terminal, supply pins, address inputs, enable input, and eight channel terminals before laying out the PCB.
What happens if power is removed while an input voltage remains?
The MAX378EPE+ turns all multiplexer channels off if its power supplies are turned off while input voltages remain applied. According to the Analog Devices product page, the fault-protected series N-channel/P-channel/N-channel structure limits leakage to only a few nanoamperes. This behavior reduces the amount of current that can pass toward downstream equipment during an abnormal supply sequence, although the application must still observe all absolute maximum ratings.
MAX378EPE+ vs MAX378CPE+ - which is better for low-temperature systems?
The MAX378EPE+ is the better choice for systems requiring operation down to -40 °C, while the MAX378CPE+ has a listed minimum operating temperature of 0 °C. Both are 1-of-8 multiplexers in PDIP-16 packages, with the same 3.5 kΩ maximum on-resistance, ±4.5 V to ±18 V dual-supply range, 1 µs maximum on-time, and 300 ns maximum off-time. The temperature rating is therefore the decisive functional difference for cold environments.
Can MAX378EPE+ replace MAX378EPE?
The MAX378EPE+ can serve as a close functional replacement for the MAX378EPE because both use the 16-PDIP package and retain the 1-of-8 topology and 3.5 kΩ maximum on-resistance. However, the manufacturer comparison material notes that some electrical characteristics differ between the suffix variants. Confirm the complete electrical tables, temperature grade, and absolute maximum ratings before treating the interchange as an unqualified drop-in replacement.
When should I choose MAX378EPE+ over MAX378CPE+?
Choose MAX378EPE+ when the enclosure or operating environment can reach -40 °C and the design requires the stated +85 °C upper operating limit. The MAX378CPE+ is suitable only when the 0 °C to +85 °C operating range is acceptable. Outside temperature qualification, both parts share the PDIP-16 footprint, 1-of-8 configuration, 3.5 kΩ maximum on-resistance, and ±4.5 V to ±18 V dual-supply capability.
Is MAX378EPE+ suitable for automated test equipment?
The MAX378EPE+ is suitable for automated test equipment that selects among several high-voltage analog measurement channels. Its 1-of-8 architecture, 3.5 kΩ maximum on-resistance, 1 µs maximum on-time, and 300 ns maximum off-time support controlled source selection. The device can also feed a precision amplifier such as the MAX420, which the manufacturer application material describes as a programmable-gain stage for gain correction.
What is the best drop-in replacement for MAX378EPE+?
The closest identified same-footprint alternatives are MAX378EPE and MAX378CPE+. MAX378EPE retains the 16-PDIP package, 1-of-8 configuration, 3.5 kΩ maximum on-resistance, and ±4.5 V to ±18 V dual-supply range, but its suffix-specific electrical characteristics require review. MAX378CPE+ matches the major switching specifications while changing the minimum operating temperature from -40 °C to 0 °C. Verify every ordering code and electrical limit before replacement.
What can replace MAX378EPE+ on an existing 16-pin PCB?
An existing 16-pin MAX378EPE+ board can be evaluated for reuse with MAX378EPE or MAX378CPE+, subject to full datasheet verification. Both candidates use the 16-PDIP format and preserve the headline 1-of-8, 3.5 kΩ, ±4.5 V to ±18 V, 1 µs, and 300 ns specifications. The principal documented distinctions are suffix-specific electrical characteristics and the minimum operating temperature of 0 °C for MAX378CPE+.
Where can I buy MAX378EPE+ and check its current availability?
Use the Request a Quote form on this page to request MAX378EPE+ availability, lead time, and a quotation for the required quantity. The Request a Quote workflow is the appropriate commercial channel for this product and avoids stale quoted figures. Engineers should specify the exact MAX378EPE+ ordering code, the required quantity, and the target delivery location so the quotation can reflect the correct 16-pin PDIP configuration.
What is the lead time and price of MAX378EPE+?
Submit the MAX378EPE+ Request a Quote form on this page for current price, stock confirmation, and production lead time. Quotation terms can vary with quantity, packaging, and delivery requirements, so engineers should avoid relying on an old catalog figure for a new build. Include the required quantity and destination in the request, and allow the supplier to confirm whether the device is in production and available for allocation.
What are the key specifications of MAX378EPE+ that engineers should know?
The key MAX378EPE+ specifications are an 8-channel 1-of-8 configuration, 3.5 kΩ maximum on-resistance, ±4.5 V to ±18 V dual-supply operation, 1 µs maximum on-time, 300 ns maximum off-time, and operation from -40 °C to +85 °C. According to the manufacturer product page, the fault-protected N-channel/P-channel/N-channel structure limits power-off leakage to a few nanoamperes, and the device is packaged in 16-pin PDIP.

Mühendislik referans verileri: MAX378EPE+ — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the MAX378EPE+ when the design needs an 8-channel, single-ended high-voltage multiplexer in a 16-pin PDIP package and must operate across the -40 °C to +85 °C range. Its 3.5 kΩ maximum on-resistance, ±4.5 V to ±18 V dual supplies and fault-protected channel structure suit laboratory and industrial measurement systems. Select MAX378CPE+ when the equipment never operates below 0 °C and the equivalent switching ratings are sufficient. Consider MAX378EPE for a footprint-compatible redesign, but compare the suffix-specific electrical characteristics carefully before approving the interchange. In every case, verify absolute maximum input ratings, control logic, fault-current behavior, settling requirements and source-impedance errors against the final board architecture.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün MAX378EPE MAX378CPE+
Package 16-PDIP 16-PDIP PDIP-16
Brand Analog Devices Analog Devices Analog Devices
Number of Channels 8 8 8
Multiplexer Configuration 1-of-8, single-ended 1-of-8, single-ended 1-of-8, single-ended
Maximum On-Resistance 3.5 kΩ 3.5 kΩ 3.5 kΩ
Dual Supply Voltage Range ±4.5 V to ±18 V ±4.5 V to ±18 V ±4.5 V to ±18 V
Maximum On-Time 1 µs 1 µs 1 µs
Maximum Off-Time 300 ns 300 ns 300 ns

Ana Farklılayıcılar

  • Supports cold environments across a -40 °C to +85 °C range (karşılaştırma:MAX378CPE+)
  • Matches the principal switching specifications of MAX378CPE+ (karşılaştırma:MAX378CPE+)
  • Retains the 16-PDIP footprint of the MAX378EPE (karşılaştırma:MAX378EPE)

Tasarım Notları

Use separate bypass capacitors close to the positive and negative supply pins, following the manufacturer datasheet's recommended values and layout. The ±4.5 V to ±18 V dual-supply range does not define a safe input range for every channel, so verify the absolute maximum input voltage independently. During fault testing, ensure that externally applied voltages and prospective fault currents cannot exceed the published limits.

Do not treat the 3.5 kΩ maximum on-resistance as a constant value across temperature, voltage, and channel conditions. Include it in the complete source-impedance and gain-error calculation, especially with high-impedance sensors. Also avoid leaving address or enable inputs floating; drive every control input to a defined logic level so the selected channel remains deterministic during power-up and test transitions.

Allow sufficient settling time after changing channels because the published 1 µs on-time and 300 ns off-time describe switching behavior rather than complete measurement accuracy. Long traces, connector capacitance, leakage, and high source impedance can extend settling. For precision measurements, use a short common path, maintain a consistent reference return, and place the precision amplifier close enough to minimize additional parasitic capacitance.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The manufacturer identifies MAX378 as a production product, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals status is stated for this ordering code. AEC-Q100 is not applicable to this general-purpose interface IC.

Veri doğrulanma tarihi: 2026-11-19 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

MAX378EPE+ datasheet MAX378EPE+ pinout MAX378EPE+ datasheet pdf MAX378EPE+ equivalent MAX378EPE+ replacement MAX378EPE+ cross reference MAX378EPE+ vs MAX378CPE+ MAX378EPE+ 16-PDIP multiplexer MAX378EPE+ high voltage multiplexer MAX378EPE+ price MAX378EPE+ stock Analog Devices MAX378EPE+ MAX378EPE+ application circuit MAX378EPE+ 3.5kOhm 16-PDIP

İlgili Bileşenler ve Terimler

Analog Devices MAX378EPE+ MAX378EPE MAX378CPE+ MAX379 MAX420 analog multiplexer analog switch interface IC fault-protected multiplexer single-ended multiplexer 1-of-8 multiplexer high-voltage measurement data acquisition programmable gain on-resistance off-time on-time N-channel P-channel dual supply PDIP-16 through-hole package Automated test equipment Industrial instrumentation
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle