onsemi

MC14029BD - 4-Bit Binary/BCD Up/Down Counter | onsemi

MPN: MC14029BD ✓ Aktif
16-pin SOIC Package
MOQ: 1 |

MC14029BD Genel Bakış

The onsemi MC14029BD is a 4-bit binary/decade up/down counter built with complementary MOS P-channel and N-channel enhancement-mode devices in a single monolithic structure. The device supports binary counting and BCD operation, with four complementary outputs, an asynchronous parallel load function, and separate count-up and count-down clock inputs. It is packaged in a 16-pin SOIC for surface-mount assembly.

A binary counter is a sequential digital circuit that stores or tracks a number of clock events and advances or reverses its state through a defined sequence of binary states. The MC14029B extends this category with selectable binary or decimal counting, making it a logic IC within the broader counter, divider, and clock-and-timing hierarchy. Its decade mode supports values from 0 through 9 before rollover, while binary mode supports a 4-bit count from 0 through 15.

The counter consists of type-D flip-flop stages with gating that provides toggle capability. Separate count-up and count-down inputs allow the counting direction to be selected, and asynchronous load inputs provide a parallel mechanism for initializing the output state. The complementary outputs support both active-high and active-low counting signals, making the device suitable for modular counters, programmable timing systems, sequence generators, and industrial control logic.

The MC14029B family is identified as a CMOS counter constructed from P-channel and N-channel enhancement-mode devices. CMOS construction is significant in digital systems because it supports low static power dissipation relative to the switching activity, while complementary logic can provide rail-to-rail output levels and noise margin benefits. The operating voltage, clock frequency, output current, and environmental limits should be taken from the manufacturer datasheet when designing a new circuit.

Typical uses include bidirectional event counting, frequency division, decade sequencing, pulse-train generation, and embedded control logic. The binary/BCD selection allows the same physical counter to support both hexadecimal-style state progression and decimal displays or decade-based timing systems. In cascaded designs, multiple MC14029BD devices can form larger counters when the application requires more than four count bits.

For PCB implementation, place the device close to the signals it drives and route clock, reset, load, and carry inputs away from sensitive analog or high-speed clock networks. The asynchronous load and reset controls should be checked against the system timing budget because their assertion can change the counter outputs independently of the counting clock. Decoupling requirements, maximum transition rates, and input logic levels must follow the manufacturer datasheet.

This page combines the family-level device description, package information, a source-linked pricing record, compatible same-family references, and practical implementation guidance. It is intended to help engineers identify the correct counter function, verify the 16-pin surface-mount footprint, and plan logic-level, timing, and layout decisions before releasing a PCB.

Drop-in alternatifler için MC14029BD — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

MC14029BDR2G

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 16-pin SOIC
Same 16-pin SOIC footprint and MC14029B counter function; suffix-specific ordering and qualification conditions require confirmation.

📋 Katalogda Olmayan Referans Alternatifi

MC14029BDR2

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 16-pin SOIC
Same 16-pin SOIC footprint and MC14029B counter function; confirm suffix-specific electrical and temperature limits before substitution.

📋 Katalogda Olmayan Referans Alternatifi

MC14029BD Özellikler

Counter Type Binary/Decade Up/Down Counter
Number of Counter Elements 1 element
Counter Width 4 bits
Counting Mode Binary or BCD
Logic Family CMOS
Transistor Construction MOS P-channel and N-channel enhancement-mode devices
Internal Storage Type-D flip-flop stages
Counting Direction Control Separate count-up and count-down inputs
Çıkış Konfigürasyonu Complementary outputs
Parallel Load Asynchronous parallel load
Toggle Capability Yes
Paket 16-pin SOIC
Montaj Türü Surface mount

MC14029BD 16-pin soic Pin Yapısı Kılavuzu

MC14029BD (16-pin soic paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.

16-pin soic paket pin çizelgesi için MC14029BD

Ayrıntılı pin çıkış verisi mevcut değil: MC14029BD.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

MC14029BD için uygundur 6 uygulamas: Bidirectional Event Counter, BCD Decade Sequencer, Frequency Divider, Programmable Timer, Digital Logic State Generator, Industrial Sequence Control.

🏭

Bidirectional Event Counter

The MC14029BD is suitable for counting events arriving from two directions because it provides separate count-up and count-down inputs within one 4-bit counter. A prescaler can translate higher-frequency sensor pulses into the counter's supported input conditions, while asynchronous load establishes the initial value. The complementary outputs allow downstream logic to observe either active-high or active-low state transitions. Before implementation, confirm the input frequency, supply voltage, and output timing against the manufacturer limits.

🔧

BCD Decade Sequencer

In BCD mode, the MC14029BD advances through decimal states and supports applications that require decade rather than full binary progression. This is useful for decimal timing chains, stepper-index logic, and ten-state sequencers. Asynchronous load permits the next state to be established quickly, while complementary outputs support both clock polarities in surrounding logic. Verify clock-edge and load timing requirements in the MC14029B datasheet before operating near the maximum supported frequency.

⚡

Frequency Divider

The MC14029BD can divide an input pulse train by using its binary counting states, with each output changing at a predictable multiple of the input clock frequency. A 4-bit counter provides 16 binary states, while BCD operation supplies ten-state division behavior. Stable frequency-dividing operation requires confirming the maximum clock frequency, supply level, and output transition requirements for the selected operating conditions. Cascaded devices can extend the division ratio when additional counter stages are required.

⏱️

Programmable Timer

The asynchronous load function allows the MC14029BD to function as the counting element of a programmable timer. A controller can load a selected count, enable counting, and then interpret the complementary outputs as elapsed-time or timeout indicators. Separate up and down inputs support period measurement or reverse-counting variants. The timer should be designed around the family's verified clock-rate and supply-voltage limits, with a defined reset strategy that meets the output timing requirements.

🧩

Digital Logic State Generator

The MC14029BD can serve as a state generator when a system requires repeatable binary or decimal progression. The four complementary outputs offer convenient active-high and active-low versions of the same state, reducing the need for inversion stages in surrounding logic. Asynchronous load makes it practical to jump to a known state during initialization or after an error. Designers should account for setup and hold timing around the load and count controls and ensure the output state is stable before sampling it.

🏭

Industrial Sequence Control

The MC14029BD is applicable to sequence-control blocks that count machine events and advance through defined states. Its binary and BCD choices allow the same counter architecture to support general logic states or decimal process steps, while asynchronous load supports deterministic initialization. For industrial equipment, confirm the exact device temperature grade, noise margins, and supply limits for the installation environment. Keep event inputs short and properly conditioned to prevent metastability or unintended counting.

Önerilen Ürünler Özeti

MC14029BDR2G Same-family 16-pin SOIC counter option Kullanıldığı Yer: Bidirectional Event Counter, Frequency Divider, Digital Logic State Generator, Industrial Sequence Control MC14C88BP onsemi Kullanıldığı Yer: Bidirectional Event Counter, Frequency Divider, Digital Logic State Generator, Industrial Sequence Control MC14029BDR2 Same-family decimal counter option Kullanıldığı Yer: BCD Decade Sequencer, Programmable Timer
What is the onsemi MC14029BD?
The onsemi MC14029BD is a 4-bit binary/decade up/down counter in a 16-pin SOIC package. According to the manufacturer datasheet, it uses MOS P-channel and N-channel enhancement-mode devices in a monolithic structure, with type-D flip-flop stages and gating that provides toggle capability. It can operate in either binary or BCD mode and is intended for up/down counting and frequency-divider applications.
How many bits and counting modes does the MC14029BD provide?
The MC14029BD provides one 4-bit counter with selectable binary or BCD operation. The manufacturer describes four type-D flip-flop stages with gating for toggle capability. In binary mode the output advances through 4-bit states, while BCD mode supports decade counting. Separate count-up and count-down inputs control the counting direction, and complementary outputs provide both signal polarities.
What package and pin count does MC14029BD use?
The MC14029BD uses a 16-pin SOIC surface-mount package. The family datasheet and distributor documentation identify the device as a 16-pin counter IC. Because exact pin names and numbering must be taken from the package drawing and pin-description table, use the manufacturer MC14029B datasheet when assigning PCB tracks rather than relying on a generic SOIC-16 outline.
Where can I download the MC14029BD datasheet PDF?
The official MC14029B datasheet PDF is available from onsemi at https://www.onsemi.com/pdf/datasheet/mc14029b-d.pdf. It contains the family description, electrical characteristics, timing information, and package drawings needed to design around the MC14029BD. Use the ordering-information section to verify that the D suffix corresponds to the required 16-pin SOIC package.
Where can I find the MC14029BD pinout?
The MC14029BD pinout is documented in the manufacturer MC14029B datasheet and its 16-pin SOIC drawing. Use the pin-description table to assign clock, load, reset, mode, count, and supply functions. The generic 16-pin SOIC package key used on this page identifies the footprint, but the manufacturer pin table remains the authority for signal names and numbering.
Is MC14029BD suitable for BCD counter applications?
Yes, the MC14029BD is specifically designed for binary or decade up/down counting. The manufacturer datasheet states that the device can be used in either Binary or BCD operation. This makes it appropriate for decimal counters, decade frequency dividers, and control sequences that need to roll over after the ninth count rather than after the fifteenth binary count.
What can replace the MC14029BD on the same PCB?
The closest documented same-family references are MC14029BDR2G and MC14029BDR2, subject to confirming the exact suffix, temperature grade, and reel configuration against the approved BOM. The MC14029BD uses a 16-pin SOIC, so a replacement must match that footprint and preserve the counter, mode, clock, load, and output functions. The Request a Quote form on this page can be used for an availability review.
Is MC14029BDR2G pin compatible with MC14029BD?
The MC14029BDR2G is a 16-pin SOIC member of the same MC14029B counter family and is the most practical same-package candidate identified for the MC14029BD. Exact substitution still requires checking the ordering table for electrical limits, temperature range, and suffix-specific qualifications. Use the manufacturer pin and function tables to confirm that the footprint and terminal functions remain unchanged.
MC14029BD vs MC14029BDR2G: which should I choose?
Choose the MC14029BD when the approved part number specifically calls for the D suffix; choose MC14029BDR2G only after confirming its ordering code and production status meet the design requirements. Both are associated with the 16-pin SOIC MC14029B family, but suffix-specific temperature ranges or packing codes can affect procurement and qualification. The manufacturer ordering information should govern the final substitution.
When should I choose MC14029BD over another 4-bit counter?
Choose the MC14029BD when the design needs a dedicated 4-bit counter that can count up or down and can switch between binary and BCD operation. Its asynchronous load control and complementary outputs are useful when another logic section must preset the count or use either output polarity. If a design instead requires parallel access to internal state, a different counter architecture may be more appropriate.
Is MC14029BD suitable for an industrial up/down event counter?
The MC14029BD is functionally suitable for an industrial event-counter block when its voltage, timing, and temperature ratings match the application. It provides separate count-up and count-down inputs plus asynchronous load, allowing a controller to initialize the count without waiting for a clock edge. Industrial qualification still requires checking the exact temperature grade and environmental requirements before release.
How do I design the PCB layout for an MC14029BD?
Route the count-up, count-down, load, and reset inputs away from sensitive analog and high-speed clock nets, and keep the device near the logic that consumes its complementary outputs. Place the required bypass capacitor close to the supply and ground pins according to the manufacturer application guidance. Treat asynchronous controls as timing-critical because load or reset can change the outputs independently of a counting edge.
What are the key specifications of MC14029BD that engineers should know?
The essential MC14029BD specifications are its 4-bit counter width, selectable binary and BCD modes, separate up and down count inputs, complementary outputs, asynchronous parallel load, and 16-pin SOIC package. The device is built from complementary MOS enhancement-mode devices and type-D flip-flop stages. Supply voltage, maximum operating frequency, output drive, and temperature limits should be selected from the MC14029B datasheet tables.
Is the MC14029BD in stock and what is its lead time?
A distributor listing identifies MC14029BD as in stock, but current inventory and lead time can change without notice. Use the Request a Quote form on this page to request the current stock position, production allocation, minimum order quantity, and delivery schedule. Do not use historical availability as a manufacturing commitment.
Where can I buy MC14029BD online?
The MC14029BD can be requested through the Request a Quote form on this page, which is the appropriate channel for current unit availability, quantity breaks, and lead-time confirmation. The manufacturer datasheet URL and source listings are also provided for technical and supply-chain review. Submit the required quantity, package suffix, and delivery location with the quote request.

Mühendislik referans verileri: MC14029BD — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the MC14029BD when the design requires a dedicated 4-bit counter with separate up and down directions, selectable binary or BCD operation, and complementary outputs. Its asynchronous parallel load is especially useful for event counters, programmable timers, frequency dividers, and deterministic state generators. The MC14029BDR2G is a same-family 16-pin SOIC candidate when its ordering code, temperature grade, qualification status, and availability have been approved for the design. The MC14029BDR2 is another same-family reference that requires the same engineering review. Neither reference should be selected merely because the counter function and package appear similar; check the manufacturer ordering information, electrical limits, and lifecycle status. For new layouts, use a 16-pin SOIC footprint, apply short routing to clock and asynchronous controls, and validate setup, hold, and maximum-frequency requirements against the MC14029B datasheet.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün MC14029BDR2G MC14029BDR2
Package 16-pin SOIC 16-pin SOIC 16-pin SOIC
Brand onsemi onsemi onsemi
Counter Type Binary/Decade Up/Down Counter Binary/Decade Up/Down Counter Binary/Decade Up/Down Counter
Counter Width 4 bits 4 bits 4 bits
Counting Mode Binary or BCD Binary or BCD Binary or BCD
Logic Family CMOS CMOS CMOS
Parallel Load Asynchronous Asynchronous Asynchronous
Output Configuration Complementary outputs Complementary outputs Complementary outputs

Ana Farklılayıcılar

  • Integrated bidirectional counting (karşılaştırma:MC14029BDR2G)
  • Selectable binary and decade operation (karşılaştırma:MC14029BDR2)
  • Asynchronous parallel initialization (karşılaştırma:MC14029BDR2G)

Tasarım Notları

Treat the asynchronous load and reset inputs as clock-like control paths because they can change the counter outputs independently of the counting clock. Use the manufacturer timing table to establish setup and hold margins relative to any input that can transition near a count edge. Keep these traces short, avoid crossing them with high-current switching paths, and provide a defined reset state for every operating mode.

Place the bypass capacitor and the MC14029BD on the same side of the PCB, with the capacitor positioned as close to the supply and ground terminals as the package and layout rules permit. Route clock and control inputs away from output nodes that drive long PCB traces. If multiple counters are cascaded, keep the inter-stage output-to-clock connections short so that propagation and loading remain compatible with the selected operating frequency.

Do not treat the binary and BCD modes as interchangeable without checking the mode-control logic and the resulting rollover point. Binary operation cycles through 16 states, whereas BCD operation provides ten states. Also confirm that a proposed replacement retains the 16-pin SOIC footprint, count-up and count-down inputs, asynchronous load behavior, complementary outputs, and the required electrical ratings.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The family is a general-purpose CMOS logic counter; no explicit AEC-Q100 qualification was identified. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or current product documentation.

İlgili Aramalar

MC14029BD MC14029BD datasheet MC14029BD datasheet pdf MC14029BD pinout onsemi MC14029BD MC14029BD equivalent MC14029BD replacement MC14029BD cross reference MC14029BD vs MC14029BDR2G MC14029BD footprint MC14029BD price MC14029BD stock MC14029BD 4-bit counter MC14029BD SOIC-16 MC14029BD application circuit

İlgili Bileşenler ve Terimler

onsemi Motorola MC14029BD MC14029B MC14029BDR2G MC14029BDR2 4-bit counter binary counter BCD counter up/down counter CMOS logic logic IC counter frequency divider type-D flip-flop asynchronous parallel load complementary outputs MOS P-channel MOS N-channel 16-pin SOIC SOIC package surface-mount assembly toggle flip-flop capability MC14C88BP RoHS REACH
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle