MC14029BD - 4-Bit Binary/BCD Up/Down Counter | onsemi
MPN: MC14029BD ✓ פעילMC14029BD סקירה
A binary counter is a sequential digital circuit that stores or tracks a number of clock events and advances or reverses its state through a defined sequence of binary states. The MC14029B extends this category with selectable binary or decimal counting, making it a logic IC within the broader counter, divider, and clock-and-timing hierarchy. Its decade mode supports values from 0 through 9 before rollover, while binary mode supports a 4-bit count from 0 through 15.
The counter consists of type-D flip-flop stages with gating that provides toggle capability. Separate count-up and count-down inputs allow the counting direction to be selected, and asynchronous load inputs provide a parallel mechanism for initializing the output state. The complementary outputs support both active-high and active-low counting signals, making the device suitable for modular counters, programmable timing systems, sequence generators, and industrial control logic.
The MC14029B family is identified as a CMOS counter constructed from P-channel and N-channel enhancement-mode devices. CMOS construction is significant in digital systems because it supports low static power dissipation relative to the switching activity, while complementary logic can provide rail-to-rail output levels and noise margin benefits. The operating voltage, clock frequency, output current, and environmental limits should be taken from the manufacturer datasheet when designing a new circuit.
Typical uses include bidirectional event counting, frequency division, decade sequencing, pulse-train generation, and embedded control logic. The binary/BCD selection allows the same physical counter to support both hexadecimal-style state progression and decimal displays or decade-based timing systems. In cascaded designs, multiple MC14029BD devices can form larger counters when the application requires more than four count bits.
For PCB implementation, place the device close to the signals it drives and route clock, reset, load, and carry inputs away from sensitive analog or high-speed clock networks. The asynchronous load and reset controls should be checked against the system timing budget because their assertion can change the counter outputs independently of the counting clock. Decoupling requirements, maximum transition rates, and input logic levels must follow the manufacturer datasheet.
This page combines the family-level device description, package information, a source-linked pricing record, compatible same-family references, and practical implementation guidance. It is intended to help engineers identify the correct counter function, verify the 16-pin surface-mount footprint, and plan logic-level, timing, and layout decisions before releasing a PCB.
חלופות תחליף ישיר עבור MC14029BD — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
MC14029BDR2G
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
MC14029BDR2
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
MC14029BD מפרטים
| Counter Type | Binary/Decade Up/Down Counter |
| Number of Counter Elements | 1 element |
| Counter Width | 4 bits |
| Counting Mode | Binary or BCD |
| Logic Family | CMOS |
| Transistor Construction | MOS P-channel and N-channel enhancement-mode devices |
| Internal Storage | Type-D flip-flop stages |
| Counting Direction Control | Separate count-up and count-down inputs |
| תצורת מוצא | Complementary outputs |
| Parallel Load | Asynchronous parallel load |
| Toggle Capability | Yes |
| מארז | 16-pin SOIC |
| סוג הרכבה | Surface mount |
מדריך תצורת פינים של MC14029BD 16-pin soic
תצורת פינים עבור MC14029BD (מארזת 16-pin soic). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.
אין נתוני פריסת פינים מפורטים עבור MC14029BD.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
MC14029BD מתאים עבור 6 יישוםs: Bidirectional Event Counter, BCD Decade Sequencer, Frequency Divider, Programmable Timer, Digital Logic State Generator, Industrial Sequence Control.
Bidirectional Event Counter
The MC14029BD is suitable for counting events arriving from two directions because it provides separate count-up and count-down inputs within one 4-bit counter. A prescaler can translate higher-frequency sensor pulses into the counter's supported input conditions, while asynchronous load establishes the initial value. The complementary outputs allow downstream logic to observe either active-high or active-low state transitions. Before implementation, confirm the input frequency, supply voltage, and output timing against the manufacturer limits.
מומלץ
BCD Decade Sequencer
In BCD mode, the MC14029BD advances through decimal states and supports applications that require decade rather than full binary progression. This is useful for decimal timing chains, stepper-index logic, and ten-state sequencers. Asynchronous load permits the next state to be established quickly, while complementary outputs support both clock polarities in surrounding logic. Verify clock-edge and load timing requirements in the MC14029B datasheet before operating near the maximum supported frequency.
מומלץ
Frequency Divider
The MC14029BD can divide an input pulse train by using its binary counting states, with each output changing at a predictable multiple of the input clock frequency. A 4-bit counter provides 16 binary states, while BCD operation supplies ten-state division behavior. Stable frequency-dividing operation requires confirming the maximum clock frequency, supply level, and output transition requirements for the selected operating conditions. Cascaded devices can extend the division ratio when additional counter stages are required.
מומלץ
Programmable Timer
The asynchronous load function allows the MC14029BD to function as the counting element of a programmable timer. A controller can load a selected count, enable counting, and then interpret the complementary outputs as elapsed-time or timeout indicators. Separate up and down inputs support period measurement or reverse-counting variants. The timer should be designed around the family's verified clock-rate and supply-voltage limits, with a defined reset strategy that meets the output timing requirements.
מומלץ
Digital Logic State Generator
The MC14029BD can serve as a state generator when a system requires repeatable binary or decimal progression. The four complementary outputs offer convenient active-high and active-low versions of the same state, reducing the need for inversion stages in surrounding logic. Asynchronous load makes it practical to jump to a known state during initialization or after an error. Designers should account for setup and hold timing around the load and count controls and ensure the output state is stable before sampling it.
מומלץ
Industrial Sequence Control
The MC14029BD is applicable to sequence-control blocks that count machine events and advance through defined states. Its binary and BCD choices allow the same counter architecture to support general logic states or decimal process steps, while asynchronous load supports deterministic initialization. For industrial equipment, confirm the exact device temperature grade, noise margins, and supply limits for the installation environment. Keep event inputs short and properly conditioned to prevent metastability or unintended counting.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור MC14029BD — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | MC14029BDR2G | MC14029BDR2 |
|---|---|---|---|
| Package | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC |
| Brand | onsemi | onsemi | onsemi |
| Counter Type | Binary/Decade Up/Down Counter | Binary/Decade Up/Down Counter | Binary/Decade Up/Down Counter |
| Counter Width | 4 bits | 4 bits | 4 bits |
| Counting Mode | Binary or BCD | Binary or BCD | Binary or BCD |
| Logic Family | CMOS | CMOS | CMOS |
| Parallel Load | Asynchronous | Asynchronous | Asynchronous |
| Output Configuration | Complementary outputs | Complementary outputs | Complementary outputs |
מבדילים עיקריים
- Integrated bidirectional counting (לעומתMC14029BDR2G)
- Selectable binary and decade operation (לעומתMC14029BDR2)
- Asynchronous parallel initialization (לעומתMC14029BDR2G)
הערות תכנון
Treat the asynchronous load and reset inputs as clock-like control paths because they can change the counter outputs independently of the counting clock. Use the manufacturer timing table to establish setup and hold margins relative to any input that can transition near a count edge. Keep these traces short, avoid crossing them with high-current switching paths, and provide a defined reset state for every operating mode.
Place the bypass capacitor and the MC14029BD on the same side of the PCB, with the capacitor positioned as close to the supply and ground terminals as the package and layout rules permit. Route clock and control inputs away from output nodes that drive long PCB traces. If multiple counters are cascaded, keep the inter-stage output-to-clock connections short so that propagation and loading remain compatible with the selected operating frequency.
Do not treat the binary and BCD modes as interchangeable without checking the mode-control logic and the resulting rollover point. Binary operation cycles through 16 states, whereas BCD operation provides ten states. Also confirm that a proposed replacement retains the 16-pin SOIC footprint, count-up and count-down inputs, asynchronous load behavior, complementary outputs, and the required electrical ratings.
מידע על תאימות
The family is a general-purpose CMOS logic counter; no explicit AEC-Q100 qualification was identified. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or current product documentation.