Microchip Technology

MCP6021-E/SN - 10MHz RRIO Op Amp | Microchip Technology

MPN: MCP6021-E/SN ✓ Aktif
Less than 0.5 mV typical Vdss 1.0 mA Id 8-pin SOIC Package
MOQ: 1 |

MCP6021-E/SN Genel Bakış

Microchip Technology MCP6021-E/SN is a single-circuit, rail-to-rail input and output operational amplifier with a 10 MHz gain-bandwidth product, 8.7 nV/√Hz input noise, and a 1.0 mA typical operating current. The device is supplied in an 8-pin SOIC package. Its rail-to-rail input stage accepts signals close to the supply rails, while the output stage provides rail-to-rail swing for portable, industrial, and instrumentation systems.

An operational amplifier, or op amp, is an analog signal-conditioning IC that compares an input voltage with a feedback-derived reference and amplifies the difference. The MCP6021 belongs to the general-purpose amplifier hierarchy: operational amplifier, voltage-feedback amplifier, analog IC, and semiconductor. Its combination of moderate bandwidth, low noise, low power consumption, and flexible input/output ranges makes it useful for sensor buffers, audio paths, active filters, and low-power data-acquisition front ends.

Key features include a 10 MHz gain-bandwidth product, input-voltage noise of 8.7 nV/√Hz, typical input offset voltage below 0.5 mV, and total harmonic distortion plus noise of 0.00053%. The single amplifier supports supply voltages from 2.5 V to 5.5 V and consumes less than 1.35 mA quiescent current according to the family datasheet. These characteristics support compact designs where both signal-chain bandwidth and operating efficiency are important.

The MCP6021 uses Microchip's CMOS analog technology to provide low bias current, high open-loop gain, high-speed operation, and rail-to-rail output swing. Rail-to-rail input operation reduces the restriction imposed by common-mode input limits, while the output stage can approach either supply rail under suitable load conditions. The 10 MHz bandwidth is sufficient for many audio, filtering, buffering, and general instrumentation tasks without requiring a high-current, high-speed amplifier.

Typical applications include portable sensor interfaces, microphone and audio preamplification, active analog filters, battery-powered instruments, and low-voltage industrial control systems. The low-noise specification is valuable when amplifying weak signals, while the approximately 1 mA operating current helps extend battery life in portable equipment. The rail-to-rail input and output behavior also simplifies circuits that operate across most of the available supply range.

When using the MCP6021-E/SN, preserve the unity-gain stability conditions of the selected gain configuration and route feedback components to minimize parasitic capacitance. Decoupling capacitors should be placed close to the supply pins, and sensitive input traces should remain away from high-current switching paths. Stable operation also depends on keeping the output within its linear range and accounting for input and output common-mode behavior.

This product record combines manufacturer specifications, package and pin information, sourcing guidance, and practical circuit considerations. It also identifies same-family drop-in alternatives for PCB reuse and organizes the important differences into a direct engineering comparison, supporting faster component selection without replacing the need to review the manufacturer datasheet.

Drop-in alternatifler için MCP6021-E/SN — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

MCP6021R-E/SN

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 8-pin SOIC
Adds a rail-to-rail output stage while retaining 10 MHz bandwidth and the same 8-pin SOIC footprint; output swing differs from the standard MCP6021 configuration

📋 Katalogda Olmayan Referans Alternatifi

MCP6022-E/SN

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 8-pin SOIC
Provides two amplifiers in the same 8-pin SOIC footprint rather than one; the unused second channel occupies two package pins

📋 Katalogda Olmayan Referans Alternatifi

MCP6023-E/SN

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 8-pin SOIC
Provides two amplifiers in the same 8-pin SOIC footprint and adds a Chip Select function; the unused or controlled second channel differs functionally from the target

📋 Katalogda Olmayan Referans Alternatifi

MCP6021-E/SN Maksimum Değerlendirmeler & Elektriksel Özellikler

Amplifier Type Single-circuit general-purpose operational amplifier
Gain-Bandwidth Product 10 MHz
Input Noise Density 8.7 nV/√Hz
Typical Operating Current 1.0 mA
Maximum Quiescent Current Less than 1.35 mA
Input Offset Voltage Less than 0.5 mV typical
Supply Voltage Range 2.5 V to 5.5 V
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Total Harmonic Distortion Plus Noise 0.00053%
Technology CMOS
Paket 8-pin SOIC
Montaj Türü Surface mount
Number of Amplifiers 1

MCP6021-E/SN Pin Yapısı

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pin 1 NC — Not connected
Pin 2 -IN — Inverting input
Pin 3 +IN — Non-inverting input
Pin 4 V- — Negative supply or ground connection
Pin 5 V+ — Positive supply connection
Pin 6 OUT — Amplifier output
Pin 7 NC — Not connected
Pin 8 NC — Not connected

Tipik Uygulamalar

MCP6021-E/SN için uygundur 6 uygulamas: Portable Sensor Signal Conditioning, Microphone and Audio Preamplification, Active Analog Filtering, Battery-Powered Instrumentation, Industrial Control and Data Acquisition, General-Purpose Voltage Buffer.

🧩

Portable Sensor Signal Conditioning

The MCP6021-E/SN fits low-voltage sensor front ends because its rail-to-rail input stage accepts signals near the supply limits while the 10 MHz gain-bandwidth product supports responsive buffering. With a 2.5 V to 5.5 V supply and approximately 1.0 mA typical operating current, it helps preserve battery life in portable instruments. Place the amplifier close to the sensor or transducer, use short traces, and select a gain that preserves amplifier stability. The 8.7 nV/√Hz noise specification is valuable for weak sensor outputs, while the input offset voltage below 0.5 mV typical helps reduce DC error after calibration.

🎧

Microphone and Audio Preamplification

The MCP6021-E/SN is appropriate for microphone buffers and low-level audio preamplifiers because it combines 8.7 nV/√Hz input noise with 0.00053% THD+N. Its 10 MHz bandwidth is substantially wider than the audible band, allowing the closed-loop gain to be set without bandwidth becoming the limiting factor. Use conventional non-inverting or inverting amplifier arrangements and verify output swing into the microphone bias and downstream load. The rail-to-rail input stage is especially useful in 2.5 V to 5.5 V systems where the sensor or microphone signal may occupy much of the available voltage range.

📡

Active Analog Filtering

The MCP6021-E/SN can implement first- and higher-order active filters where a 10 MHz gain-bandwidth product provides useful closed-loop bandwidth beyond the signal of interest. Its low-noise operation improves the filter's contribution to small-signal signal-to-noise ratio, while approximately 1.0 mA typical operating current limits the impact on portable power budgets. Select resistor and capacitor values against the required closed-loop gain, and confirm the intended compensation or stability configuration. Component tolerances and the amplifier's input-voltage noise directly affect filter accuracy and output noise, so both should be included in the design calculation.

🔬

Battery-Powered Instrumentation

The MCP6021-E/SN suits low-power instrumentation because it operates from 2.5 V to 5.5 V while consuming less than 1.35 mA quiescent current, with a typical operating current of 1.0 mA. The 10 MHz bandwidth permits measurement channels to amplify signals beyond narrow sensor-bandwidth requirements, and the 8.7 nV/√Hz noise specification supports precision-oriented designs. Use low-leakage input protection components, avoid unnecessary bias currents, and evaluate the complete measurement chain because reference accuracy, resistor noise, and ADC input loading can dominate final performance.

🏭

Industrial Control and Data Acquisition

The MCP6021-E/SN can condition low-level analog signals in industrial control and data-acquisition systems where a compact, low-power amplifier is required. Rail-to-rail input operation increases usable signal span, while the 0.00053% THD+N specification supports low-distortion acquisition. A 10 MHz gain-bandwidth product also provides margin for filtering and higher-bandwidth sensor interfaces. Design the layout to separate sensitive inputs from switching nodes, provide local supply decoupling, and confirm the exact operating-temperature rating for the selected ordering code before deploying the amplifier in industrial equipment.

🔧

General-Purpose Voltage Buffer

The MCP6021-E/SN works as a unity-gain voltage buffer when the source has high impedance and the following stage requires lower output impedance. Its rail-to-rail input and output behavior covers most of a low-voltage signal range, and the 10 MHz bandwidth provides more capability than a basic precision buffer. Check the output load and capacitive-drive limits before using the device as a direct replacement for a wider-bandwidth buffer. Place input, feedback, and decoupling connections so that parasitic capacitance does not alter the intended closed-loop response or stability margin.

Önerilen Ürünler Özeti

MCP6021R Same-family rail-to-rail input/output amplifier Kullanıldığı Yer: Portable Sensor Signal Conditioning, Microphone and Audio Preamplification, Battery-Powered Instrumentation, General-Purpose Voltage Buffer MCP6022 Same-family dual-amplifier option Kullanıldığı Yer: Portable Sensor Signal Conditioning, Active Analog Filtering, Industrial Control and Data Acquisition, General-Purpose Voltage Buffer MCP6023 Same-family selectable dual amplifier Kullanıldığı Yer: Microphone and Audio Preamplification, Industrial Control and Data Acquisition MCP6021 Single-amplifier family member Kullanıldığı Yer: Active Analog Filtering MCP6024 Same-family quad amplifier for multichannel instrumentation Kullanıldığı Yer: Battery-Powered Instrumentation
What is the operating voltage of MCP6021-E/SN?
The MCP6021-E/SN operates from a single supply of 2.5 V to 5.5 V. According to the Microchip MCP6021 family datasheet, this range applies to the MCP6021, MCP6021R, MCP6022, MCP6023, and MCP6024 family. The device is particularly suitable for low-voltage systems using 2.5 V, 3.3 V, or 5 V rails, although the exact operating-temperature limits for the extended-temperature MCP6021-E/SN ordering code should be confirmed in the datasheet.
What are the key specifications of MCP6021-E/SN that engineers should know?
The MCP6021-E/SN is a 10 MHz, rail-to-rail input/output operational amplifier with 8.7 nV/√Hz input noise, an input offset voltage below 0.5 mV typical, and less than 1.35 mA quiescent current. The manufacturer datasheet also identifies 0.00053% THD+N as a key performance figure. It is a single amplifier in an 8-pin SOIC package, providing a practical combination of bandwidth, low noise, and low power for signal conditioning.
Where can I download the MCP6021-E/SN datasheet PDF?
The official MCP6021-E/SN datasheet PDF is available from Microchip Technology at the 20001685E document URL. It covers the MCP6021, MCP6021R, MCP6022, MCP6023, and MCP6024 families, including electrical characteristics, typical performance curves, pin configurations, and ordering information. Use the manufacturer document for final electrical limits, package drawings, test conditions, and temperature ratings.
Where can I find the MCP6021-E/SN pinout?
The MCP6021-E/SN pinout is shown in the pin-configuration section of the Microchip MCP6021 family datasheet. The device is an 8-pin SOIC with offset inputs, supply rails, output, and unconnected positions. For board layout, use the pin-description table and package drawing in the manufacturer datasheet rather than relying only on a generic SOIC-8 outline.
What can replace MCP6021-E/SN?
MCP6021R-E/SN is a same-family, pin-compatible choice when the added rail-to-rail output feature is acceptable, while MCP6022-E/SN and MCP6023-E/SN are dual-amplifier family options with the same 8-pin SOIC format. Feature differences and common-mode behavior must be checked before substitution. Use the Request a Quote form on this page for availability, price, and lead-time information for the exact MPN.
Is MCP6021-E/SN the same as MCP6021R-E/SN?
No. Both are 8-pin SOIC single amplifiers from the MCP6021 family, but MCP6021R adds a rail-to-rail output stage while retaining the rail-to-rail input capability. The ordinary MCP6021-E/SN provides the lower-cost general-purpose configuration, while MCP6021R-E/SN is preferable when the load requires output swing closer to the supply rails. Verify the required output-current and common-mode conditions in the datasheet.
What is the best Microchip equivalent for MCP6021-E/SN?
MCP6021R-E/SN is the closest same-brand family alternative when its rail-to-rail output stage is useful. MCP6022-E/SN and MCP6023-E/SN provide two amplifiers in the same 8-pin SOIC family and can fit boards that can tolerate their additional functions and electrical differences. None should be substituted without checking pin behavior, offset voltage, noise, bandwidth, and system-level operating temperature.
Where to buy MCP6021-E/SN online?
Use the Request a Quote form on this page to request the MCP6021-E/SN, current availability, and an order quotation. The exact ordering code includes an 8-pin SOIC package, and package or temperature suffixes must not be substituted without engineering review. The form provides a single route for price confirmation, lead time, minimum order quantity, and shipment scheduling.
What is the price of MCP6021-E/SN?
The current price of MCP6021-E/SN should be requested through the Request a Quote form on this page. Quotation depends on the exact package suffix, order quantity, production schedule, and current component availability. The structured pricing section records the latest known unit-price reference, while the quote form supplies a current commercial response for the exact MCP6021-E/SN ordering code.
What is the lead time for MCP6021-E/SN?
The current lead time for MCP6021-E/SN depends on factory inventory and the requested quantity. Submit the exact MPN through the Request a Quote form on this page to obtain a current scheduling response. For production planning, also confirm the package suffix, operating-temperature grade, and any date-code or traceability requirements before releasing the purchase order.
Is MCP6021-E/SN in stock?
Current MCP6021-E/SN inventory should be confirmed through the Request a Quote form on this page because stock levels change with order volume and factory activity. Request quantity, target ship date, and any assembly-line requirements with the request. The part is identified as an active Microchip Technology amplifier, but a current availability confirmation is still required before committing a build schedule.
MCP6021-E/SN vs MCP6021R-E/SN - which is better for a portable sensor interface?
Choose MCP6021R-E/SN when the sensor interface needs the amplifier output to approach either supply rail more closely; choose MCP6021-E/SN when the conventional output swing is adequate and lower complexity is preferred. Both are 10 MHz, low-noise amplifiers in 8-pin SOIC packages, and the family datasheet specifies a 2.5 V to 5.5 V supply range. The final choice should also account for load current, sensor output range, and battery power consumption.
When should I choose MCP6021-E/SN instead of a dual amplifier?
Choose MCP6021-E/SN when the circuit requires only one amplifier, reducing board area and power consumption relative to a dual-amplifier package. The device provides a 10 MHz gain-bandwidth product, approximately 1.0 mA typical operating current, and rail-to-rail inputs. Select a dual amplifier when two independent signal paths or a differential stage are needed and that functional consolidation provides a clearer system benefit than the added device complexity.
Is MCP6021-E/SN suitable for audio and microphone amplification?
Yes, the MCP6021-E/SN is suitable for many low-voltage audio and microphone preamplification paths. The manufacturer datasheet specifies 8.7 nV/√Hz input noise and 0.00053% THD+N, while the 10 MHz gain-bandwidth product provides useful bandwidth beyond typical audio-band requirements. Choose the external feedback and gain arrangement carefully, and confirm the maximum output swing into the intended load.
How should MCP6021-E/SN be used in a power-sensitive design?
Use the MCP6021-E/SN where its low operating current and rail-to-rail input range improve signal utilization. The typical operating current is 1.0 mA, while the family specification states less than 1.35 mA quiescent current under the relevant conditions. A supply of 2.5 V to 5.5 V supports low-voltage systems, but the complete system budget must include sensor current, logic load, regulator efficiency, and the amplifier's output-load requirement.

Mühendislik referans verileri: MCP6021-E/SN — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose MCP6021-E/SN for a general-purpose, low-voltage signal chain requiring one 10 MHz amplifier with rail-to-rail input capability, 8.7 nV/√Hz input noise, and an 8-pin SOIC footprint. It is appropriate when the conventional output-swing range is acceptable and simplicity is more important than the MCP6021R's rail-to-rail output stage. Select MCP6021R-E/SN when the load or signal range requires closer output swing to the supply rails. Consider MCP6022-E/SN when two independent amplifier channels can simplify the PCB or reduce package count. Choose MCP6023-E/SN when a second channel and Chip Select control provide a measurable power-management benefit. For every option, confirm supply range, noise, offset voltage, stability, output loading, and exact operating-temperature limits against the manufacturer datasheet before substitution.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün MCP6021R-E/SN MCP6022-E/SN MCP6023-E/SN
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Number of Amplifiers 1 1 2 2
Gain-Bandwidth Product 10 MHz 10 MHz 10 MHz 10 MHz
Input Noise Density 8.7 nV/√Hz 8.7 nV/√Hz 8.7 nV/√Hz 8.7 nV/√Hz
Supply Voltage Range 2.5 V to 5.5 V 2.5 V to 5.5 V 2.5 V to 5.5 V 2.5 V to 5.5 V
Input Common-Mode Range Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail
Special Feature None Rail-to-rail output stage Dual amplifier Dual amplifier with Chip Select

Ana Farklılayıcılar

  • Uses only one amplifier channel in the 8-pin SOIC footprint (karşılaştırma:MCP6022-E/SN)
  • Simplifies designs that do not require the MCP6021R rail-to-rail output stage (karşılaştırma:MCP6021R-E/SN)
  • Avoids the unused-channel and control-pin overhead of the selectable dual amplifier (karşılaştırma:MCP6023-E/SN)

Tasarım Notları

Place the supply-decoupling capacitor directly between pins 4 and 5, with a short and low-inductance return path. Keep the non-inverting input trace short and away from the output and supply routes. The MCP6021-E/SN is a high-frequency 10 MHz device, so PCB resistance and inductance can create measurable supply noise or oscillation even when the schematic appears correct.

Do not assume that rail-to-rail input operation permits an input exactly at or beyond either supply rail. Maintain the datasheet's input and output common-mode limits, including restrictions associated with output current. In amplifier designs, also verify that the selected closed-loop gain is stable with the feedback network, source impedance, and parasitic capacitance present on the assembled board.

For low-level sensor signals, use a guarding and grounding strategy that minimizes leakage from PCB contamination and from adjacent digital or switching circuits. The amplifier's 8.7 nV/√Hz input noise is a device specification, but the total input-referred noise also includes resistor noise, source impedance, bandwidth, and leakage current. These effects must be evaluated together when designing a precision measurement front end.

The MCP6021-E/SN operates from 2.5 V to 5.5 V and has a typical operating current of 1.0 mA. Use a regulator with adequate low-voltage stability and check its behavior at light load, where supply current is minimal. The amplifier's operating current is only one part of the power budget; sensor biasing, pull-up networks, ADC leakage, and regulator quiescent current can materially affect battery life.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

Compliance declarations are not stated in the manufacturer pages or distributor records used for this product record. The -E/SN ordering code includes an extended-temperature variant, but AEC-Q100 qualification must not be inferred from that temperature designation.

Veri doğrulanma tarihi: 2026-11-15 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

mcp6021 datasheet mcp6021 datasheet pdf mcp6021 price mcp6021 op amp mcp6021 equivalent MCP6021-E/SN pinout MCP6021-E/SN replacement MCP6021-E/SN vs MCP6021R-E/SN MCP6021 10MHz amplifier MCP6021-E/SN 8-SOIC Microchip MCP6021-E/SN MCP6021 sensor signal conditioning MCP6021-E/SN stock MCP6021-E/SN application circuit

İlgili Bileşenler ve Terimler

Microchip Technology MCP6021-E/SN MCP6021 MCP6021R-E/SN MCP6022-E/SN MCP6023-E/SN MCP6024 operational amplifier op amp voltage-feedback amplifier general-purpose amplifier rail-to-rail input rail-to-rail output CMOS analog technology gain-bandwidth product input noise density input offset voltage quiescent current signal conditioning active filter microphone preamplifier battery-powered instrumentation 8-pin SOIC SOIC family surface-mount package
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle