Microchip Technology

MCP6024-I/SL - 10MHz Quad R-R Op Amp | Microchip

MPN: MCP6024-I/SL ✓ Aktif
<0.5 mV Vdss 1.0 mA Id 14-pin SOIC, 0.150 inch Package
MOQ: 1 |

MCP6024-I/SL Genel Bakış

The Microchip Technology MCP6024-I/SL is a four-circuit, rail-to-rail input and output operational amplifier with a 10 MHz gain-bandwidth product, typical operating current of 1.0 mA, and input offset voltage below 0.5 mV, housed in a 14-pin SOIC package.

An operational amplifier, or op amp, is an analog integrated circuit that uses high open-loop gain to amplify voltage differences. The MCP6024 belongs to the amplifier IC hierarchy: operational amplifier → voltage-feedback amplifier → analog signal-conditioning IC. Its rail-to-rail input and output stages permit sensing and driving signals close to the supply rails, while its CMOS implementation supports low bias current, high-speed operation, and low power consumption.

Key features include a 10 MHz gain-bandwidth product, 8.7 nV/√Hz input-voltage noise, maximum input offset voltage of 250 µV, and 0.00053% THD+N. The device operates from 2.5 V to 5.5 V, supports a typical output current of 30 mA, and includes four amplifiers in one 14-pin SOIC. Rail-to-rail operation is particularly useful when the usable signal range extends near either supply rail.

Microchip's advanced CMOS process provides high open-loop gain, low input bias current, and a rail-to-rail output swing. These characteristics make the quad amplifier suitable for general-purpose signal conditioning, where four independent channels can reduce package count on mixed-signal boards. The 1.0 mA typical operating-current specification supports portable and low-power equipment, although actual current varies with supply voltage, load, channel activity, and operating temperature.

Typical uses include sensor conditioning, battery-powered instrumentation, ADC input drivers, audio preamplification, filter stages, and general voltage amplification. In each channel, the amplifier can be configured as a non-inverting or inverting amplifier, or as part of an active filter. The quad organization makes the MCP6024 especially useful when a board needs several amplifiers with similar electrical performance.

When laying out a design, place input, output, supply, and decoupling connections according to the manufacturer's pinout and recommended circuit. Account for output-current limits when driving heavier loads, and verify stability with the selected gain, feedback network, capacitive load, and supply bypassing. The -I grade is intended for an industrial temperature range of -40°C to +85°C.

This page combines manufacturer specifications, package details, sourcing guidance, application analysis, and a qualified drop-in comparison. It helps engineers distinguish temperature-grade alternatives from merely similar amplifiers and focus on the electrical and packaging details that determine PCB compatibility.

Drop-in alternatifler için MCP6024-I/SL — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

MCP6024-E/SL

✅ Yerleştirme
📦 14-SOIC
Extended temperature rating of +125°C versus +85°C; gain-bandwidth product remains 10 MHz and maximum input offset voltage remains 250 µV

📋 Katalogda Olmayan Referans Alternatifi

MCP6024-I/SL Maksimum Değerlendirmeler & Elektriksel Özellikler

Amplifier Type General-purpose operational amplifier
Number of Channels 4 circuits
Gain-Bandwidth Product 10 MHz
Typical Operating Current 1.0 mA
Typical Input Offset Voltage <0.5 mV
Maximum Input Offset Voltage 250 µV
Input Voltage Noise Density 8.7 nV/√Hz
Total Harmonic Distortion Plus Noise 0.00053%
Supply Voltage Range 2.5 V to 5.5 V
Input Common-Mode Range Rail-to-rail
Output Voltage Swing Rail-to-rail
Typical Output Current 30 mA
İşletim Sıcaklığı Aralığı -40°C to +85°C
Paket 14-pin SOIC, 0.150 inch
Montaj Türü Surface mount
Automotive Qualification AEC-Q100

MCP6024-I/SL Pin Yapısı

SOIC-14 (3.9mm) Package Pinout Diagram SOIC-14 14-pin small outline IC, 3.9x8.7mm, P1.27mm, JEDEC MS-012. Pin 1 by chamfer. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 SOIC-14 (3.9mm)
Pin 1 OUTA — Amplifier A output
Pin 2 INA- — Amplifier A inverting input
Pin 3 INA+ — Amplifier A non-inverting input
Pin 4 V- — Negative supply or ground connection
Pin 5 INB+ — Amplifier B non-inverting input
Pin 6 INB- — Amplifier B inverting input
Pin 7 OUTB — Amplifier B output
Pin 8 OUTC — Amplifier C output
Pin 9 V+ — Positive supply connection
Pin 10 INC- — Amplifier C inverting input
Pin 11 INC+ — Amplifier C non-inverting input
Pin 12 OUTD — Amplifier D output
Pin 13 IND- — Amplifier D inverting input
Pin 14 IND+ — Amplifier D non-inverting input

Tipik Uygulamalar

MCP6024-I/SL için uygundur 6 uygulamas: Battery-Powered Sensor Conditioning, ADC Input Buffering, Active Filter and Signal Conditioning, Audio Preamplification, Industrial Control and Instrumentation, Portable and Low-Power Measurement.

🧩

Battery-Powered Sensor Conditioning

The MCP6024-I/SL suits low-voltage sensor front ends where four channels can condition related inputs without using separate amplifier packages. Rail-to-rail input operation allows the amplifier to sense signals near the lower or upper end of a 2.5 V to 5.5 V supply, while the 1.0 mA typical operating current helps limit power demand in portable equipment. Its 10 MHz gain-bandwidth product provides useful bandwidth for common resistive sensors and low-rate data-acquisition paths. The principal design consideration is verifying source impedance, output swing, and noise requirements before selecting the gain and feedback network.

📈

ADC Input Buffering

The MCP6024-I/SL can provide four independent buffers or gain stages ahead of an ADC, helping isolate the converter from sensor and switching-node loading. Its rail-to-rail input and output behavior makes it useful with low-voltage ADC input ranges, while 10 MHz bandwidth accommodates signal paths that require settling beyond the sampled bandwidth. The 8.7 nV/√Hz noise density and 250 µV maximum offset voltage are useful starting points for precision budgeting. Confirm the ADC acquisition time, input capacitance, settling accuracy, and output-current requirement for the selected channel configuration.

🔧

Active Filter and Signal Conditioning

The MCP6024-I/SL is appropriate for building active low-pass, high-pass, or multi-stage analog filters where four repeated channels simplify layout and reduce component count. The 10 MHz gain-bandwidth product provides ample closed-loop bandwidth for many low-frequency sensor and audio-conditioning stages, while the low 8.7 nV/√Hz input-noise density supports quiet signal paths. Designers should calculate gain-bandwidth, noise-gain stability, resistor tolerance, and capacitor selection for each filter. The same SOIC can house unrelated filter sections, provided each amplifier remains within its output swing and drive limits.

🎧

Audio Preamplification

The MCP6024-I/SL can implement four small-signal audio preamplifier or line-stage channels when a design requires rail-to-rail operation and a 10 MHz gain-bandwidth product. Its 0.00053% THD+N specification is useful for low-distortion signal paths, and the quad package permits consistent channel implementation in audio interface boards. The amplifier still requires careful source impedance, gain, bandwidth, and output-loading analysis. Avoid assuming that the specified THD+N applies at every frequency, load, supply voltage, and gain; check the manufacturer test conditions for the operating point used in the design.

🏭

Industrial Control and Instrumentation

The MCP6024-I/SL is a practical fit for industrial control and instrumentation boards that require several general-purpose analog channels around a low-voltage controller. Its -40°C to +85°C grade covers the specified industrial temperature range, while the 2.5 V to 5.5 V supply operation supports common embedded control rails. The four amplifiers can implement buffering, gain, level shifting, or impedance conversion around sensors and actuators. Industrial designs should still account for transient protection, grounding, diagnostic behavior, and the amplifier's maximum output-current limitation independently of normal signal amplitude.

📱

Portable and Low-Power Measurement

The MCP6024-I/SL supports portable measurement equipment where four analog channels, rail-to-rail operation, and low typical operating current are useful together. A 2.5 V to 5.5 V supply enables operation from compact battery rails, and the 10 MHz gain-bandwidth product permits moderately high-bandwidth measurement stages. The 8.7 nV/√Hz noise density is helpful when evaluating weak sensor outputs, although resistor-network noise and reference accuracy may dominate. Minimize leakage into high-impedance sources and select capacitor and resistor types carefully to prevent board-level leakage from overwhelming the amplifier's own input characteristics.

What are the key specifications of MCP6024-I/SL that engineers should know?
The MCP6024-I/SL is a quad 10 MHz operational amplifier with rail-to-rail input and output operation, a typical operating current of 1.0 mA, and input offset voltage below 0.5 mV. According to the Microchip Technology MCP6024 product information, it operates from 2.5 V to 5.5 V in a 14-pin SOIC. The four amplifiers also provide 8.7 nV/√Hz input noise and 0.00053% THD+N, making the device suitable for general-purpose analog signal conditioning, filtering, instrumentation, and ADC drive applications.
Where can I download the MCP6024 datasheet PDF?
The MCP6024 datasheet is available through Microchip Technology's official product page at https://www.microchip.com/en-us/product/MCP6024. The manufacturer page is the appropriate starting point for the MCP6024-I/SL electrical characteristics, pin configuration, recommended operating conditions, and typical application circuits. A separate mirror of the datasheet is also listed by AllDataSheet, but the manufacturer document should be used as the controlling technical reference when schematic, layout, or qualification decisions are being made.
Where can I find the MCP6024 pinout and package information?
The MCP6024-I/SL uses a 14-pin SOIC with a 0.150-inch body width. Use the manufacturer datasheet's pin-configuration and package drawings to assign the four amplifier channels and supply pins. The MCP6024-I/SL ordering information uses the /SL package designation for the standard SOIC configuration. Pin assignments should not be inferred from the dual or single amplifier members of the family, because channel counts and package lead arrangements differ even when some functional pin roles are similar.
What is the operating voltage of MCP6024-I/SL?
The MCP6024-I/SL operates from 2.5 V to 5.5 V. According to Microchip Technology's MCP6024 product information, the quad amplifier is intended for low-voltage analog systems and combines rail-to-rail input and output behavior with a 10 MHz gain-bandwidth product. Designers should maintain the supply within the stated operating range and include adequate bypass capacitance near the device to control supply noise and maintain predictable transient performance.
What is the MCP6024-I/SL used for?
The MCP6024-I/SL is used for general-purpose voltage amplification, sensor conditioning, active filtering, ADC input buffering, audio preamplification, and portable instrumentation. Its four amplifiers provide a gain-bandwidth product of 10 MHz, rail-to-rail input and output operation, and a typical operating current of 1.0 mA. The quad SOIC format is advantageous when several low-power signal-conditioning channels are required on the same board.
Where can I buy MCP6024-I/SL and check current availability?
Use the Request a Quote form on this page to request MCP6024-I/SL pricing, stock confirmation, current lead time, and minimum order quantity. The part is a standard 14-pin SOIC industrial-grade amplifier, and the Request a Quote workflow provides a direct way to confirm the exact suffix and obtain an order response without relying on stale catalog information. Specify MCP6024-I/SL exactly when requesting a quotation.
What is the price of MCP6024-I/SL?
Current pricing for the MCP6024-I/SL should be confirmed through the Request a Quote form on this page. The form can establish the applicable unit price, volume breaks, stock status, and lead time for the exact 14-pin SOIC ordering code. This avoids confusion with MCP6024T-I/SL, MCP6024-E/SL, MCP6024-I/P, or other family members that differ in temperature grade, packing form, or package.
What is the lead time for MCP6024-I/SL?
Request the current MCP6024-I/SL lead time through the Request a Quote form on this page. Lead time depends on factory inventory, manufacturing conditions, order quantity, and the selected shipping destination, so a confirmed quotation is more useful than a generic family-level estimate. When submitting the request, identify the exact MCP6024-I/SL suffix and required quantity so that package, temperature grade, and delivery information are matched correctly.
Is MCP6024-I/SL in stock?
Current MCP6024-I/SL inventory should be confirmed through the Request a Quote form on this page. The form is the appropriate route for checking stock, factory availability, quantity breaks, and estimated dispatch timing for the exact ordering code. Do not substitute MCP6024T-I/SL automatically, because the T designation identifies a different packing form even though it belongs to the same amplifier family.
What is the best drop-in replacement for MCP6024-I/SL?
The MCP6024-E/SL is the closest identified drop-in replacement because it retains the 14-pin SOIC footprint and the same 10 MHz MCP6024 core, while extending the temperature grade from -40°C to +85°C to -40°C to +125°C. According to the comparison information for the MCP6024 family, both parts have a 250 µV maximum input offset voltage and a 2.5 V minimum supply voltage. Confirm every operating limit, lifecycle condition, and sourcing requirement before substitution.
Can MCP6024-E/SL replace MCP6024-I/SL?
The MCP6024-E/SL can serve as a drop-in replacement for the MCP6024-I/SL when the extended-temperature grade is acceptable and the application remains within both devices' common electrical limits. Both use the same 14-pin SOIC architecture, 10 MHz gain-bandwidth product, rail-to-rail input/output design, 250 µV maximum offset voltage, and 2.5 V minimum supply voltage. The principal difference is the temperature grade, with the E version rated to +125°C.
MCP6024-I/SL vs MCP6024-E/SL: which is better for an industrial design?
The MCP6024-E/SL is preferable when the industrial design must operate above +85°C because it is the extended-temperature version of the MCP6024. The MCP6024-I/SL is rated from -40°C to +85°C, while the E grade extends the upper limit to +125°C. Both use the same 14-pin SOIC package and provide 10 MHz bandwidth, rail-to-rail input/output operation, 8.7 nV/√Hz noise, and a 250 µV maximum input offset voltage.
When should I choose MCP6024-I/SL instead of another quad op amp?
Choose the MCP6024-I/SL when a design needs four independent rail-to-rail amplifier channels, a 10 MHz gain-bandwidth product, and operation across 2.5 V to 5.5 V in a -40°C to +85°C environment. It is particularly useful for compact, low-power signal-conditioning boards where four separate packages would increase board area. The trade-off is that general-purpose CMOS performance may not match specialized low-noise, high-precision, or high-voltage amplifier families.
Is MCP6024-I/SL suitable for low-voltage sensor and ADC interfaces?
The MCP6024-I/SL is suitable for many low-voltage sensor and ADC interface circuits because its input and output stages operate rail-to-rail across a 2.5 V to 5.5 V supply. Its typical 1.0 mA operating current, 10 MHz bandwidth, and 8.7 nV/√Hz noise density support efficient signal conditioning. Verify the source impedance, ADC input range, settling requirements, capacitive loading, and sensor output drive before finalizing the gain and filtering network.
What is the best Microchip equivalent for MCP6024-I/SL?
The MCP6024-E/SL is the identified Microchip-family drop-in alternative for MCP6024-I/SL because both use the same 14-pin SOIC footprint and share the same 10 MHz core performance. The E variant adds an extended +125°C temperature rating, while the original -I/SL reaches +85°C. Other MCP6024 order codes may change packing or package, so they should not be treated as automatic replacements without checking the manufacturer's ordering information and the existing PCB footprint.

Mühendislik referans verileri: MCP6024-I/SL — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the MCP6024-I/SL for general-purpose, low-voltage analog designs that require four rail-to-rail amplifier channels, a 10 MHz gain-bandwidth product, and operation from 2.5 V to 5.5 V. Its -40°C to +85°C rating is appropriate when the enclosure remains within industrial temperature limits. Select the MCP6024-E/SL when the PCB footprint and electrical performance are unchanged but the system may exceed +85°C; the extended +125°C grade provides margin at the cost of a different ordering suffix. Neither part is an automatic substitute for a dedicated low-noise precision amplifier, high-voltage amplifier, or high-output-current driver. For those requirements, compare the required noise, offset, common-mode range, output drive, and operating voltage against the MCP6024 specification before committing the design.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün MCP6024-E/SL
Package 14-SOIC 14-SOIC
Brand Microchip Technology Microchip Technology
Number of Amplifiers 4 circuits 4 circuits
Gain-Bandwidth Product 10 MHz 10 MHz
Supply Voltage Range 2.5 V to 5.5 V 2.5 V to 5.5 V
Maximum Input Offset Voltage 250 µV 250 µV
Input Common-Mode Range Rail-to-rail Rail-to-rail
Output Swing Rail-to-rail Rail-to-rail
Operating Temperature Range -40°C to +85°C -40°C to +125°C
Input Noise Density 8.7 nV/√Hz 8.7 nV/√Hz

Ana Farklılayıcılar

  • Extended-temperature drop-in option (karşılaştırma:MCP6024-E/SL)
  • Four rail-to-rail amplifier channels in one package (karşılaştırma:MCP6024-E/SL)
  • Low-power CMOS operation (karşılaştırma:MCP6024-E/SL)

Tasarım Notları

Place the input, output, and supply bypass connections directly adjacent to their corresponding SOIC pins. Keep each amplifier's feedback components close to the relevant input and output pins to minimize parasitic inductance and feedback-loop area. Connect the V+ and V- pins to short, low-impedance supply paths, and provide local high-frequency decoupling according to the manufacturer's recommended circuit. Avoid routing sensitive input traces beneath or immediately beside switching-node and digital-return paths.

Verify output loading against the 30 mA typical output-current capability and preserve the 2.5 V to 5.5 V supply range. Rail-to-rail input and output operation does not guarantee unlimited input range, output drive, or stable operation with every capacitive load. Check the feedback configuration, load impedance, supply decoupling, and expected signal amplitude at temperature. Use the MCP6024-E/SL instead when the enclosure can exceed the MCP6024-I/SL upper temperature limit of +85°C.

Check settling accuracy rather than relying only on the 10 MHz gain-bandwidth product. The required settling time depends on closed-loop gain, target accuracy, load, and the effective bandwidth of the selected feedback network. For high-impedance sensors, minimize leakage from board contamination and adjacent digital inputs, and use guarded routing where appropriate. Also evaluate the 8.7 nV/√Hz input-noise density together with resistor noise and reference accuracy at the circuit level.

Do not treat every MCP6024 ordering suffix as a direct replacement. MCP6024T-I/SL changes the packing form, MCP6024-I/P changes the package, and MCP6024-E/SL changes the temperature grade. Compare the manufacturer's ordering information, package drawing, pinout, and electrical limits before substitution. In a four-channel design, also verify that each unused amplifier is configured in a stable state rather than left with an open input.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The distributor product listing identifies the MCP6024-I/SL as AEC-Q100 automotive qualified. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not established from the cited manufacturer or distributor information.

İlgili Aramalar

mcp6024 datasheet mcp6024 datasheet pdf mcp6024 price mcp6024 buy mcp6024 op amp mcp6024 equivalent MCP6024-I/SL pinout MCP6024-I/SL replacement MCP6024-I/SL vs MCP6024-E/SL MCP6024-I/SL application circuit MCP6024-I/SL 14-SOIC Microchip MCP6024-I/SL

İlgili Bileşenler ve Terimler

Microchip Technology MCP6024-I/SL MCP6024-E/SL MCP6024 operational amplifier op amp quad amplifier voltage-feedback amplifier analog signal-conditioning IC rail-to-rail input rail-to-rail output gain-bandwidth product input offset voltage input voltage noise density THD+N CMOS 14-SOIC SOIC family surface-mount package AEC-Q100 sensor conditioning ADC input buffering active filter industrial instrumentation
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle