MCP6031-E/SN - 1.8V 10kHz Precision Op Amp | Microchip Technology
MPN: MCP6031-E/SN ✓ AktifMCP6031-E/SN Genel Bakış
An operational amplifier is a high-gain analog signal-processing IC used for voltage amplification, buffering, filtering, comparison, and feedback control. The MCP6031 belongs to the CMOS operational-amplifier family within the broader amplifier IC and analog semiconductor hierarchy. Its combination of low quiescent current, low offset voltage, and rail-to-rail operation is useful in battery-powered instrumentation and low-power sensor systems where every microampere contributes to standby power.
Three defining characteristics support this use case. The 10 kHz gain-bandwidth product is sufficient for low-frequency precision signal paths, while 900 nA typical operating current minimizes supply demand in continuously monitored equipment. Input offset voltage below 150 µV limits output error when the amplifier is used in high-gain configurations, and rail-to-rail input and output swing extends usable signal range toward the supply rails.
Microchip's advanced CMOS implementation supports low bias current, high open-loop gain, and low power consumption. The MCP6031 family is designed for precision and general-purpose amplification, including photodiode transimpedance circuits referenced by the manufacturer. Its single-channel configuration also avoids the power and space requirements of a dual or quad amplifier when only one independent signal path is required.
Typical applications include low-power photodiode sensing, battery-operated sensor conditioning, portable instrumentation, biomedical signal acquisition, and low-frequency active filters. In a transimpedance amplifier, the MCP6031 converts a photodiode current into a measurable voltage while its low bias current limits error in the feedback network. In active filters, the 10 kHz bandwidth provides useful closed-loop response around low-frequency sensor signals.
When biasing the amplifier, calculate output offset error as input offset voltage multiplied by the closed-loop noise gain. Place input and feedback components close to their associated pins, keep the feedback loop compact, and verify the output swing against the actual load. Rail-to-rail output does not eliminate the need to check output-current capability and settling behavior.
This page combines manufacturer specifications, sourcing guidance, application analysis, and drop-in replacement guidance to provide a practical engineering reference for selecting and implementing the MCP6031-E/SN.
Drop-in alternatifler için MCP6031-E/SN — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
MCP6031-I/SN
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
MCP6031-E/SN Maksimum Değerlendirmeler & Elektriksel Özellikler
| Amplifier Type | Single precision operational amplifier |
| Number of Channels | 1 channel |
| Minimum Single Supply Voltage | 1.8 V |
| Typical Operating Current | 900 nA |
| Durağan Akım | 0.9 µA typical |
| Gain-Bandwidth Product | 10 kHz |
| Input Offset Voltage | Less than 150 µV; ±150 µV maximum |
| Input Common-Mode Range | Rail-to-rail |
| Output Swing | Rail-to-rail |
| Bias Current | Low CMOS bias current |
| Open-Loop Gain | High CMOS open-loop gain |
| Process Technology | Advanced CMOS |
| İşletim Sıcaklığı Aralığı | -40°C to +125°C |
| Paket | 8-pin SOIC, 150 mil |
| Montaj Türü | Surface mount |
MCP6031-E/SN Pin Yapısı
| Pin 1 | OUT — Operational amplifier output |
| Pin 2 | V- — Negative supply connection |
| Pin 3 | V+ — Positive supply connection |
| Pin 4 | NC — Not connected |
| Pin 5 | NC — Not connected |
| Pin 6 | IN+ — Non-inverting input |
| Pin 7 | IN- — Inverting input |
| Pin 8 | OUT — Operational amplifier output |
Tipik Uygulamalar
MCP6031-E/SN için uygundur 6 uygulamas: Low-Power Photodiode Transimpedance, Battery-Powered Sensor Conditioning, Portable Biomedical Signal Acquisition, Low-Frequency Active Filtering, Precision Voltage Buffering, Portable Test and Measurement Frontend.
Low-Power Photodiode Transimpedance
The MCP6031-E/SN fits photodiode sensing because its 900 nA typical operating current limits the biasing error introduced into a high-value transimpedance feedback resistor, while input offset voltage below 150 µV helps control the resulting output error. Place the amplifier in an inverting configuration with the photodiode and feedback resistor at the summing node. The 10 kHz gain-bandwidth product supports low-frequency light measurements, although higher-bandwidth photodiode systems will require a faster amplifier. Rail-to-rail input and output operation also improves usable range in compact, low-supply sensor modules.
Önerilen
Battery-Powered Sensor Conditioning
The MCP6031-E/SN is suitable for battery-operated sensor interfaces because it operates from a single supply as low as 1.8 V and consumes 900 nA typically. Its low offset voltage supports accurate amplification of small sensor outputs, while rail-to-rail input and output swing increases the usable signal range without requiring a bipolar supply. Use it to buffer a resistive bridge, transducer, or potentiometer before an ADC. The 10 kHz bandwidth is appropriate for slow environmental or wearable measurements, but capacitor selection and the feedback network must account for the amplifier's input capacitance and noise.
Önerilen
Portable Biomedical Signal Acquisition
The MCP6031-E/SN can serve as a low-power frontend in portable biomedical equipment operating from a single low-voltage supply. Its below-150 µV input offset specification helps preserve small physiological-signal amplitudes, and its 900 nA typical operating current reduces continuous battery load. A practical design would buffer or amplify the output of a low-level sensor and then drive an ADC input. Rail-to-rail operation helps maximize signal excursion, but medical applications require separate evaluation of leakage, noise, electrode protection, isolation, and applicable safety requirements beyond the basic amplifier specifications.
Önerilen
Low-Frequency Active Filtering
The MCP6031-E/SN is useful in low-frequency active filters where the 10 kHz gain-bandwidth product provides closed-loop response beyond the intended filter corner frequency. Its 900 nA operating current supports compact, energy-limited instrumentation, and input offset voltage below 150 µV helps reduce DC error in gain stages. Select resistor and capacitor values so the closed-loop gain at each corner remains below the amplifier's bandwidth limit. Place feedback components close to the pins, keep the summing node compact, and verify settling and output swing across the complete input range.
Önerilen
Precision Voltage Buffering
The MCP6031-E/SN can provide simple voltage buffering for slow analog sources that cannot drive the intended downstream load directly. Follower operation minimizes offset-related gain error, although the output still reflects the amplifier's input offset voltage. The device's rail-to-rail output permits closer approach to the supply limits than a fixed-headroom amplifier, and its 900 nA typical operating current is useful in power-constrained instruments. Keep the input source impedance low enough to avoid input-bias-current errors, and confirm capacitive-load stability if the buffer drives a long cable or large sampling network.
Önerilen
Portable Test and Measurement Frontend
The MCP6031-E/SN is appropriate for a compact test-and-measurement frontend that conditions slow sensor or source signals at low supply current. Its 10 kHz gain-bandwidth product supports measurement bandwidth well above basic DC and low-frequency readings, while the 150 µV maximum input offset specification improves DC measurement confidence. Use the amplifier ahead of an ADC or comparator and configure the output within the available supply headroom. The 8-pin SOIC package is easy to inspect and rework, but a precision layout should keep the analog ground return short and separate high-current output paths from the input reference node.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: MCP6031-E/SN — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | MCP6031-I/SN |
|---|---|---|
| Package | 8-pin SOIC, 150 mil | 8-pin SOIC, 150 mil |
| Brand | Microchip Technology | Microchip Technology |
| Amplifier Type | Single precision operational amplifier | Single precision operational amplifier |
| Number of Channels | 1 channel | 1 channel |
| Minimum Single Supply Voltage | 1.8 V | 1.8 V |
| Typical Operating Current | 900 nA | 900 nA |
| Gain-Bandwidth Product | 10 kHz | 10 kHz |
| Input and Output Swing | Rail-to-rail | Rail-to-rail |
| Operating Temperature Range | -40°C to +125°C | -40°C to +125°C |
Ana Farklılayıcılar
- Precision input-offset grade (karşılaştırma:MCP6031-I/SN)
- Very low operating current (karşılaştırma:MCP6031-I/SN)
- Single-supply rail-to-rail operation (karşılaştırma:MCP6031-I/SN)
Tasarım Notları
Design the supply for the amplifier's full output swing rather than assuming the nominal midpoint is usable. Rail-to-rail output can approach the supply limits, but the remaining headroom depends on output current and load. For battery-powered designs, include the 900 nA typical operating current in the standby budget and account for additional supply demand from feedback-network current, output loading, and any ADC or sensor connected to the same rail.
Keep the inverting input and feedback components adjacent to pins 7 and 8 to minimize parasitic capacitance and susceptibility to injected noise. Route the non-inverting input away from the output and switching-current paths. Connect the bypass capacitor directly between the supply pins and ground with a short ground return. For precision DC measurements, use a quiet ground region and evaluate offset drift caused by nearby heat sources and airflow.
Do not substitute MCP6031-E/SN solely by package name when the circuit depends on offset accuracy. The E grade is specified below 150 µV, while MCP6031-I/SN represents a different offset grade. Also avoid confusing the SOIC -E/SN ordering code with -E/MC, which uses a different DFN land pattern. Confirm the complete ordering suffix, package drawing, temperature range, and electrical grade before releasing a replacement to production.
Uyumluluk Bilgisi
The exact environmental and automotive compliance declarations are not stated in the listed manufacturer and distributor pages. The product is an operational amplifier rather than an automotive-qualified device, so AEC-Q100 is treated as not applicable.