Microchip Technology

MCP6031-E/SN - 1.8V 10kHz Precision Op Amp | Microchip Technology

MPN: MCP6031-E/SN ✓ فعال
1.8 V Vdss 900 nA Id 8-pin SOIC, 150 mil Package
حداقل سفارش: 1 |

MCP6031-E/SN نمای کلی

The Microchip Technology MCP6031-E/SN is a single-amplifier precision operational amplifier with a 10 kHz gain-bandwidth product, 900 nA typical operating current, and input offset voltage below 150 µV, packaged in an 8-pin SOIC. The device operates from a single supply as low as 1.8 V and provides rail-to-rail input and output swing.

An operational amplifier is a high-gain analog signal-processing IC used for voltage amplification, buffering, filtering, comparison, and feedback control. The MCP6031 belongs to the CMOS operational-amplifier family within the broader amplifier IC and analog semiconductor hierarchy. Its combination of low quiescent current, low offset voltage, and rail-to-rail operation is useful in battery-powered instrumentation and low-power sensor systems where every microampere contributes to standby power.

Three defining characteristics support this use case. The 10 kHz gain-bandwidth product is sufficient for low-frequency precision signal paths, while 900 nA typical operating current minimizes supply demand in continuously monitored equipment. Input offset voltage below 150 µV limits output error when the amplifier is used in high-gain configurations, and rail-to-rail input and output swing extends usable signal range toward the supply rails.

Microchip's advanced CMOS implementation supports low bias current, high open-loop gain, and low power consumption. The MCP6031 family is designed for precision and general-purpose amplification, including photodiode transimpedance circuits referenced by the manufacturer. Its single-channel configuration also avoids the power and space requirements of a dual or quad amplifier when only one independent signal path is required.

Typical applications include low-power photodiode sensing, battery-operated sensor conditioning, portable instrumentation, biomedical signal acquisition, and low-frequency active filters. In a transimpedance amplifier, the MCP6031 converts a photodiode current into a measurable voltage while its low bias current limits error in the feedback network. In active filters, the 10 kHz bandwidth provides useful closed-loop response around low-frequency sensor signals.

When biasing the amplifier, calculate output offset error as input offset voltage multiplied by the closed-loop noise gain. Place input and feedback components close to their associated pins, keep the feedback loop compact, and verify the output swing against the actual load. Rail-to-rail output does not eliminate the need to check output-current capability and settling behavior.

This page combines manufacturer specifications, sourcing guidance, application analysis, and drop-in replacement guidance to provide a practical engineering reference for selecting and implementing the MCP6031-E/SN.

جایگزین‌های drop-in برای MCP6031-E/SN — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

MCP6031-I/SN

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 8-pin SOIC, 150 mil
Input offset voltage grade differs: MCP6031-E/SN is below 150 µV, while MCP6031-I/SN is the less precise I grade; package and 10 kHz bandwidth remain compatible

📋 جایگزین مرجع (خارج از کاتالوگ)

MCP6031-E/SN حداکثر مقادیر مجاز و مشخصات الکتریکی

Amplifier Type Single precision operational amplifier
Number of Channels 1 channel
Minimum Single Supply Voltage 1.8 V
Typical Operating Current 900 nA
جریان سکون 0.9 µA typical
Gain-Bandwidth Product 10 kHz
Input Offset Voltage Less than 150 µV; ±150 µV maximum
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Bias Current Low CMOS bias current
Open-Loop Gain High CMOS open-loop gain
Process Technology Advanced CMOS
محدوده دمای کاری -40°C to +125°C
بسته‌بندی 8-pin SOIC, 150 mil
نوع نصب Surface mount

پیکربندی پین MCP6031-E/SN

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
پین 1 OUT — Operational amplifier output
پین 2 V- — Negative supply connection
پین 3 V+ — Positive supply connection
پین 4 NC — Not connected
پین 5 NC — Not connected
پین 6 IN+ — Non-inverting input
پین 7 IN- — Inverting input
پین 8 OUT — Operational amplifier output

کاربردهای معمول

MCP6031-E/SN مناسب است برای 6 کاربردs: Low-Power Photodiode Transimpedance, Battery-Powered Sensor Conditioning, Portable Biomedical Signal Acquisition, Low-Frequency Active Filtering, Precision Voltage Buffering, Portable Test and Measurement Frontend.

📷

Low-Power Photodiode Transimpedance

The MCP6031-E/SN fits photodiode sensing because its 900 nA typical operating current limits the biasing error introduced into a high-value transimpedance feedback resistor, while input offset voltage below 150 µV helps control the resulting output error. Place the amplifier in an inverting configuration with the photodiode and feedback resistor at the summing node. The 10 kHz gain-bandwidth product supports low-frequency light measurements, although higher-bandwidth photodiode systems will require a faster amplifier. Rail-to-rail input and output operation also improves usable range in compact, low-supply sensor modules.

🧩

Battery-Powered Sensor Conditioning

The MCP6031-E/SN is suitable for battery-operated sensor interfaces because it operates from a single supply as low as 1.8 V and consumes 900 nA typically. Its low offset voltage supports accurate amplification of small sensor outputs, while rail-to-rail input and output swing increases the usable signal range without requiring a bipolar supply. Use it to buffer a resistive bridge, transducer, or potentiometer before an ADC. The 10 kHz bandwidth is appropriate for slow environmental or wearable measurements, but capacitor selection and the feedback network must account for the amplifier's input capacitance and noise.

💊

Portable Biomedical Signal Acquisition

The MCP6031-E/SN can serve as a low-power frontend in portable biomedical equipment operating from a single low-voltage supply. Its below-150 µV input offset specification helps preserve small physiological-signal amplitudes, and its 900 nA typical operating current reduces continuous battery load. A practical design would buffer or amplify the output of a low-level sensor and then drive an ADC input. Rail-to-rail operation helps maximize signal excursion, but medical applications require separate evaluation of leakage, noise, electrode protection, isolation, and applicable safety requirements beyond the basic amplifier specifications.

📡

Low-Frequency Active Filtering

The MCP6031-E/SN is useful in low-frequency active filters where the 10 kHz gain-bandwidth product provides closed-loop response beyond the intended filter corner frequency. Its 900 nA operating current supports compact, energy-limited instrumentation, and input offset voltage below 150 µV helps reduce DC error in gain stages. Select resistor and capacitor values so the closed-loop gain at each corner remains below the amplifier's bandwidth limit. Place feedback components close to the pins, keep the summing node compact, and verify settling and output swing across the complete input range.

🔧

Precision Voltage Buffering

The MCP6031-E/SN can provide simple voltage buffering for slow analog sources that cannot drive the intended downstream load directly. Follower operation minimizes offset-related gain error, although the output still reflects the amplifier's input offset voltage. The device's rail-to-rail output permits closer approach to the supply limits than a fixed-headroom amplifier, and its 900 nA typical operating current is useful in power-constrained instruments. Keep the input source impedance low enough to avoid input-bias-current errors, and confirm capacitive-load stability if the buffer drives a long cable or large sampling network.

🖥️

Portable Test and Measurement Frontend

The MCP6031-E/SN is appropriate for a compact test-and-measurement frontend that conditions slow sensor or source signals at low supply current. Its 10 kHz gain-bandwidth product supports measurement bandwidth well above basic DC and low-frequency readings, while the 150 µV maximum input offset specification improves DC measurement confidence. Use the amplifier ahead of an ADC or comparator and configure the output within the available supply headroom. The 8-pin SOIC package is easy to inspect and rework, but a precision layout should keep the analog ground return short and separate high-current output paths from the input reference node.

خلاصه محصولات پیشنهادی

MCP6031 Family device used in the manufacturer photodiode transimpedance reference circuit استفاده‌شده در: Low-Power Photodiode Transimpedance, Battery-Powered Sensor Conditioning, Portable Biomedical Signal Acquisition, Low-Frequency Active Filtering, Precision Voltage Buffering, Portable Test and Measurement Frontend MCP6031-E/SN Microchip Technology استفاده‌شده در: Low-Power Photodiode Transimpedance, Battery-Powered Sensor Conditioning, Portable Biomedical Signal Acquisition, Low-Frequency Active Filtering, Precision Voltage Buffering, Portable Test and Measurement Frontend
What are the key specifications of MCP6031-E/SN that engineers should know?
The MCP6031-E/SN is a single-channel precision operational amplifier with a 10 kHz gain-bandwidth product, 900 nA typical operating current, input offset voltage below 150 µV, and rail-to-rail input and output operation. According to the Microchip MCP6031 product page and datasheet, it operates from a single supply as low as 1.8 V and is offered in an 8-pin SOIC package. These specifications make it most appropriate for low-frequency precision signal chains, sensor interfaces, and battery-powered equipment rather than high-speed waveform or communications paths.
Where can I download the MCP6031-E/SN datasheet PDF?
The authoritative MCP6031 documentation is available through Microchip Technology's official MCP6031 product page at https://www.microchip.com/en-us/product/MCP6031. The product page links the family documentation and provides ordering information for the MCP6031-E/SN. The -E/SN ordering suffix identifies the extended-temperature 8-pin SOIC configuration. Use the manufacturer document for the complete pin description, electrical characteristics, typical application circuit, and ordering table rather than relying on a distributor summary.
Where can I find the MCP6031-E/SN pinout?
The MCP6031-E/SN pinout is defined by the manufacturer's MCP6031 datasheet and its 8-pin SOIC package drawing. The device uses pins 1 and 8 for OUT, pin 2 and pin 7 for V−, pin 3 for V+, pin 6 for IN+, pins 4 and 5 for NC, and the remaining input associated with the inverting channel on pin 7. Assign PCB tracks according to the pin-description table and land pattern in the manufacturer documentation.
Is the MCP6031-E/SN suitable for battery-powered sensor conditioning?
The MCP6031-E/SN is well suited to battery-powered sensor conditioning because its typical operating current is only 900 nA and it operates from a single supply as low as 1.8 V. According to the Microchip MCP6031 datasheet, the amplifier also provides rail-to-rail input and output swing and input offset voltage below 150 µV. These characteristics reduce both supply demand and signal-range limitations in portable measurement systems, provided the selected gain and frequency remain within the 10 kHz bandwidth.
How much input offset error does MCP6031-E/SN contribute in a gain stage?
For a non-inverting amplifier, the output-referred offset error is approximately the input offset voltage multiplied by the closed-loop noise gain. Thus, a 150 µV maximum offset with a noise gain of 100 produces approximately 15 mV output offset error. The Microchip MCP6031 datasheet specifies input offset voltage below 150 µV for this grade. Include resistor tolerance, input bias current, and bias-point drift when assessing total DC accuracy for the selected feedback network.
MCP6031-E/SN vs MCP6031-I/SN - which is better for a precision application?
MCP6031-E/SN is the better choice when maximum input offset voltage is the primary selection criterion, because the E grade is specified at below 150 µV while MCP6031-I/SN uses the less precise offset grade. Both use the same 8-pin SOIC footprint and retain the MCP6031 family's 10 kHz bandwidth and low-power characteristics. Confirm the complete ordering information in Microchip's MCP6031 documentation before substituting because grade, temperature, and packaging suffixes must be matched.
When should I choose MCP6031-E/SN over a faster operational amplifier?
Choose MCP6031-E/SN when low quiescent current, low offset voltage, and rail-to-rail operation matter more than wide bandwidth or fast settling. Its 10 kHz gain-bandwidth product and 900 nA typical operating current are appropriate for slowly changing sensor signals, precision buffers, and low-frequency filters. A faster amplifier is preferable when the signal contains substantial high-frequency content, requires rapid overload recovery, or demands a larger closed-loop bandwidth.
Can MCP6031-I/SN replace MCP6031-E/SN without changing the PCB?
The MCP6031-I/SN can use the same 8-pin SOIC footprint, but it may not preserve the same DC accuracy as MCP6031-E/SN because the I grade has a different input-offset-voltage grade. The MCP6031-E/SN is specified below 150 µV, whereas the replacement uses the less precise I grade. PCB compatibility therefore does not by itself guarantee functional equivalence; compare offset voltage, temperature range, bias current, bandwidth, and production requirements before approving the substitution.
What is the best drop-in replacement for MCP6031-E/SN?
MCP6031-I/SN is the closest documented same-package drop-in candidate because it retains the 8-pin SOIC footprint and the MCP6031 family's low-power precision-amplifier architecture. The important trade-off is input offset accuracy: MCP6031-E/SN is specified below 150 µV, while MCP6031-I/SN carries the less precise I-grade classification. No cross-brand drop-in equivalent is included because the available cross-reference results do not establish both pin compatibility and the required 70% or better parametric proximity.
Is MCP6031-E/SN the same as MCP6031T-E/MC?
No. MCP6031-E/SN is packaged in an 8-pin SOIC, while MCP6031T-E/MC uses an 8-pin DFN package indicated by the MC suffix. The two package outlines require different PCB land patterns, so MCP6031T-E/MC is not a drop-in replacement for MCP6031-E/SN. Differences in temperature grade, packing code, and electrical characteristics should also be checked separately before considering them for the same design.
Where can I buy MCP6031-E/SN online?
Use the Request a Quote form on this XAIPART product page to request MCP6031-E/SN availability, current lead time, and a quotation. The form avoids stale marketplace figures and supports direct confirmation of the exact -E/SN ordering code. Before requesting a quote, verify that your design requires the 8-pin SOIC package and the E-grade input-offset specification rather than another MCP6031 package or grade.
What is the price of MCP6031-E/SN?
The current MCP6031-E/SN quotation is handled through the Request a Quote form on this page. Because market pricing and inventory can change rapidly, engineers should submit the exact part number, quantity, and delivery target rather than rely on a static listing figure. The form also allows confirmation that the requested units correspond to the 8-pin SOIC and extended-temperature ordering configuration.
What is the lead time for MCP6031-E/SN?
Request the current MCP6031-E/SN lead time and minimum order quantity through the Request a Quote form on this page. Lead time can vary with order quantity, packaging format, production inventory, and schedule, so it should be confirmed for the exact suffix. The manufacturer product page is also the appropriate reference for lifecycle status and any package or ordering-code changes.
Is MCP6031-E/SN currently in stock?
Current MCP6031-E/SN stock should be confirmed through the Request a Quote form on this page. The form supports a quantity-specific response and is more reliable than assuming inventory from a family listing. Specify whether the shipment must use a particular commercial packaging format, and include your required delivery date so availability can be checked for the exact 8-pin SOIC ordering code.
What is the best Microchip equivalent for MCP6031-E/SN?
MCP6031-I/SN is the closest same-package Microchip candidate because it retains the 8-pin SOIC footprint and the MCP6031 family's core low-power precision characteristics. It does not provide the same E-grade input-offset limit, so it is appropriate only when the looser offset specification meets the application. A different package, such as MCP6031T-E/MC, cannot replace the target without a PCB redesign. Microchip's cross-reference search can confirm newer approved alternatives.

داده‌های مرجع مهندسی برای MCP6031-E/SN — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose MCP6031-E/SN for low-voltage, low-frequency precision circuits that need rail-to-rail operation, approximately 900 nA operating current, and input offset voltage below 150 µV. It is particularly suitable for photodiode amplifiers, portable sensor interfaces, biomedical front ends, and precision buffers. Choose MCP6031-I/SN when the same SOIC footprint and low-power performance are needed but the looser offset-voltage grade is acceptable. Do not choose a DFN package such as MCP6031T-E/MC for an unchanged PCB because its land pattern is different. If the signal requires bandwidth substantially above 10 kHz, faster settling, greater output current, or lower offset than this family provides, select a different amplifier rather than forcing the MCP6031 into the design.

مقایسه با جایگزین‌ها

پارامتر این محصول MCP6031-I/SN
Package 8-pin SOIC, 150 mil 8-pin SOIC, 150 mil
Brand Microchip Technology Microchip Technology
Amplifier Type Single precision operational amplifier Single precision operational amplifier
Number of Channels 1 channel 1 channel
Minimum Single Supply Voltage 1.8 V 1.8 V
Typical Operating Current 900 nA 900 nA
Gain-Bandwidth Product 10 kHz 10 kHz
Input and Output Swing Rail-to-rail Rail-to-rail
Operating Temperature Range -40°C to +125°C -40°C to +125°C

تفاوت‌های کلیدی

  • Precision input-offset grade (در مقابلMCP6031-I/SN)
  • Very low operating current (در مقابلMCP6031-I/SN)
  • Single-supply rail-to-rail operation (در مقابلMCP6031-I/SN)

یادداشت‌های طراحی

Design the supply for the amplifier's full output swing rather than assuming the nominal midpoint is usable. Rail-to-rail output can approach the supply limits, but the remaining headroom depends on output current and load. For battery-powered designs, include the 900 nA typical operating current in the standby budget and account for additional supply demand from feedback-network current, output loading, and any ADC or sensor connected to the same rail.

Keep the inverting input and feedback components adjacent to pins 7 and 8 to minimize parasitic capacitance and susceptibility to injected noise. Route the non-inverting input away from the output and switching-current paths. Connect the bypass capacitor directly between the supply pins and ground with a short ground return. For precision DC measurements, use a quiet ground region and evaluate offset drift caused by nearby heat sources and airflow.

Do not substitute MCP6031-E/SN solely by package name when the circuit depends on offset accuracy. The E grade is specified below 150 µV, while MCP6031-I/SN represents a different offset grade. Also avoid confusing the SOIC -E/SN ordering code with -E/MC, which uses a different DFN land pattern. Confirm the complete ordering suffix, package drawing, temperature range, and electrical grade before releasing a replacement to production.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The exact environmental and automotive compliance declarations are not stated in the listed manufacturer and distributor pages. The product is an operational amplifier rather than an automotive-qualified device, so AEC-Q100 is treated as not applicable.

تاریخ تأیید داده‌ها: 2026-11-20 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

mcp6031 datasheet MCP6031-E/SN datasheet MCP6031-E/SN pinout MCP6031-E/SN specifications MCP6031-E/SN equivalent MCP6031-E/SN replacement MCP6031-E/SN drop-in replacement MCP6031-E/SN application circuit MCP6031-E/SN photodiode amplifier MCP6031-E/SN vs MCP6031-I/SN MCP6031-E/SN price MCP6031-E/SN stock Microchip MCP6031-E/SN MCP6031-E/SN 8-SOIC MCP6031-E/SN low power op amp

قطعات و اصطلاحات مرتبط

Microchip Technology MCP6031-E/SN MCP6031 MCP6031-I/SN MCP6031T-E/MC operational amplifier precision operational amplifier single-channel amplifier CMOS operational amplifier analog integrated circuit rail-to-rail input rail-to-rail output input offset voltage gain-bandwidth product quiescent current common-mode range low-dropout biasing 8-pin SOIC SOIC family surface-mount package photodiode transimpedance amplifier battery-powered sensor conditioning active filter precision voltage buffer
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ