Microchip Technology

MCP6044-I/ST - Quad 1.4V RRIO Op Amp | Microchip Technology

MPN: MCP6044-I/ST ✓ Aktif
1.4 V to 5.5 V Vdss 1 pA Id 14-pin TSSOP Package
MOQ: 1 |

MCP6044-I/ST Genel Bakış

The Microchip Technology MCP6044-I/ST is a quad, rail-to-rail input and output operational amplifier operating from a single supply as low as 1.4 V to 5.5 V, packaged in a 14-pin TSSOP. It combines four amplifiers with built-in compensation, low input bias current, and low quiescent current for compact low-power analog signal conditioning.

An operational amplifier, or op amp, is a high-gain differential amplifier used to amplify, filter, buffer, or compare low-level analog signals. The MCP6044 belongs to the operational-amplifier hierarchy within analog and mixed-signal semiconductors. Its rail-to-rail input and output capability allows signals to approach both supply rails, making it useful when available voltage headroom is limited by battery-powered or low-voltage systems.

Key specifications include a 1.4 V to 5.5 V operating supply, four amplifier channels, approximately 170 nV/√Hz input-voltage noise at 1 kHz, 100 pA typical input offset current, and 85 µV/°C input-offset voltage temperature coefficient. The device also provides 80 dB common-mode rejection and 600 nA typical quiescent current, supporting low-power operation when all four channels are active.

The MCP6044 uses built-in compensation to simplify amplifier design. Its approximately 3 V/µs slew rate allows the amplifier to respond to moderate-amplitude signal changes without requiring external compensation components. Rail-to-rail operation improves usable input and output range, while the low-noise and low-bias-current characteristics make the device suitable for precision sensor interfaces, current measurements, and buffered sensor chains.

Typical uses include portable sensor acquisition, battery-powered instrumentation, low-voltage audio signal conditioning, industrial monitoring, current sensing, and general-purpose analog buffers. The four integrated channels can support several small-signal stages in one package, reducing board area compared with four separate single or dual amplifier packages.

Designers should verify input common-mode voltage, output swing, load capacitance, and stability using the manufacturer operating conditions. Decoupling capacitors should be placed close to the supply pins, and unused amplifier inputs should be configured according to the datasheet to avoid floating-node noise and unintended current consumption.

This page combines package, electrical, environmental, application, replacement, and design guidance for engineers evaluating the MCP6044-I/ST. It also distinguishes verified same-footprint options from changes that would require PCB redesign, supporting faster component selection without treating merely similar amplifiers as drop-in replacements.

Drop-in alternatifler için MCP6044-I/ST — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller MCP6044-I/ST (aynı form faktörü ve ayağa oturma) — farklı olan Input Offset Voltage, Number of Amplifiers, Package.

Microchip Technology
Input Offset Voltage: < 3 mV
Number of Amplifiers: 4 amplifiers
Package: 14-lead TSSOP (0.173 in, 4.40 mm width)

MCP6044T-I/ST

✅ Yerleştirme
📦 14-pin TSSOP
Same 14-pin TSSOP footprint and 1.4 V to 6 V family supply span; electrical and qualification differences are 0% for the compared supply-span parameters, subject to ordering-code verification.

📋 Katalogda Olmayan Referans Alternatifi

MCP6044-E/ST

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
Microchip Technology
📦 14-pin TSSOP
4 amplifiers · 14 kHz · 600 nA · < 3 mV · 1.4 V · 6 V · Rail-to-rail · Rail-to-rail

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MCP6044-I/ST Maksimum Değerlendirmeler & Elektriksel Özellikler

Number of Amplifiers 4 channels
İşletim Besleme Gerilimi 1.4 V to 5.5 V
Absolute Maximum Supply Voltage 6 V
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Gain-Bandwidth Product 14 kHz
Slew Rate 3 V/µs
Input Voltage Noise Density 170 nV/√Hz at 1 kHz
Input Offset Current 1 pA
Input Offset Voltage 3 mV
Durağan Akım 600 nA
Common-Mode Rejection Ratio 80 dB
Input Offset Voltage Temperature Coefficient 85 µV/°C
İşletim Sıcaklığı Aralığı -40°C to +85°C
Paket 14-pin TSSOP
Compensation Built-in
RoHS Durumu Compliant

MCP6044-I/ST Pin Yapısı

TSSOP-14 (4.4mm) Package Pinout Diagram TSSOP-14 4.4x5mm, P0.65mm, JEDEC MO-153. 14-pin thin shrink. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 TSSOP-14 (4.4mm)
Pin 1 OUTA — Amplifier A output
Pin 2 -INA — Amplifier A inverting input
Pin 3 +INA — Amplifier A non-inverting input
Pin 4 V- — Negative supply connection
Pin 5 +INB — Amplifier B non-inverting input
Pin 6 -INB — Amplifier B inverting input
Pin 7 OUTB — Amplifier B output
Pin 8 OUTC — Amplifier C output
Pin 9 -INC — Amplifier C inverting input
Pin 10 +INC — Amplifier C non-inverting input
Pin 11 V+ — Positive supply connection
Pin 12 +IND — Amplifier D non-inverting input
Pin 13 -IND — Amplifier D inverting input
Pin 14 OUTD — Amplifier D output

Tipik Uygulamalar

MCP6044-I/ST için uygundur 6 uygulamas: Battery-Powered Sensor Acquisition, Industrial Process Monitoring, Low-Voltage Current Sensing, Portable Audio Signal Conditioning, Data Acquisition Front End, Low-Voltage Buffering.

📱

Battery-Powered Sensor Acquisition

The MCP6044-I/ST fits low-voltage sensor acquisition because it operates from 1.4 V to 5.5 V, supports rail-to-rail inputs and outputs, and has 600 nA typical quiescent current. Four channels can amplify, filter, or buffer outputs from resistive, capacitive, or current-output sensors without requiring four separate packages. Its approximately 170 nV/√Hz input-noise density and 1 pA input-bias current help preserve small sensor signals. The main design limitation is the 14 kHz gain-bandwidth product, which suits slow measurements rather than fast waveform acquisition.

🏭

Industrial Process Monitoring

The MCP6044-I/ST can condition multiple low-level industrial signals from pressure, temperature, and level sensors while operating from a single 3.3 V or 5 V rail. Its rail-to-rail input range accommodates sensor outputs near either supply rail, and the 80 dB common-mode rejection ratio helps reject common-mode voltage present on long sensor wiring. Four integrated channels reduce board area, although system designers should consider shielding, filtering, and grounding for sensitive industrial measurements.

⚡

Low-Voltage Current Sensing

The MCP6044-I/ST is suitable for amplifying small voltage drops produced by current-sensing resistors in low-voltage power systems. The rail-to-rail input and output capability maximizes usable range when the shunt signal is close to ground or the positive rail. Its low input-bias current of approximately 1 pA minimizes measurement disturbance, while 600 nA typical quiescent current helps conserve power. The 3 mV input-offset specification must be included in the accuracy budget for low-current measurements.

🎧

Portable Audio Signal Conditioning

The MCP6044-I/ST can provide gain and buffering for low-level audio or microphone signals in portable equipment powered from a low-voltage battery. Rail-to-rail operation preserves more of the available signal range, and approximately 170 nV/√Hz input noise supports quiet amplification of weak sources. Its 3 V/µs slew rate is adequate for many speech and general audio signals but may limit high-fidelity or large-signal designs. Decoupling and input-biasing resistors should follow the manufacturer's typical application circuit.

🖥️

Data Acquisition Front End

The MCP6044-I/ST provides four buffered analog channels for multiplexed or parallel low-frequency data-acquisition systems. Rail-to-rail inputs make it easier to use the full range of a 2.5 V, 3.3 V, or 5 V analog supply, while the low quiescent current limits overhead when the acquisition system operates continuously. The 14 kHz bandwidth is appropriate for temperature, pressure, position, and other slow-varying measurements. For faster transients, a higher-bandwidth amplifier is required.

🔧

Low-Voltage Buffering

The MCP6044-I/ST can buffer high-impedance sources or distribute a measured signal to downstream circuitry across four independent amplifier channels. Voltage-follower or moderate-gain configurations benefit from rail-to-rail output capability, while approximately 1 pA input-bias current reduces loading on sensitive sources. The 600 nA quiescent current is attractive for always-on systems. Designers should still verify capacitive-load stability and ensure each unused input is tied to a defined common-mode voltage.

What are the key specifications of MCP6044-I/ST that engineers should know?
The MCP6044-I/ST is a quad operational amplifier with a 1.4 V to 5.5 V supply range, rail-to-rail inputs and outputs, 14 kHz gain-bandwidth product, 3 V/µs slew rate, and 600 nA quiescent current. According to the Microchip MCP6044 product page and family datasheet, the device also provides approximately 170 nV/√Hz input noise at 1 kHz and operates from -40°C to +85°C in a 14-pin TSSOP package.
What is the operating voltage of MCP6044-I/ST?
The MCP6044-I/ST operates from a single supply of 1.4 V to 5.5 V. According to the Microchip MCP6044 product page, the family can operate with a supply as low as 1.4 V, while the listed absolute maximum supply voltage is 6 V. Rail-to-rail input and output operation lets the amplifier use much of the available signal range at low supply voltages.
Is MCP6044-I/ST a rail-to-rail operational amplifier?
Yes, the MCP6044-I/ST supports rail-to-rail input and rail-to-rail output operation. According to the Microchip MCP6044 family datasheet, this allows input and output voltages to approach the positive and negative supply rails. The feature is especially useful in 1.8 V, 2.5 V, and 3.3 V systems where fixed common-mode and output ranges would reduce usable signal span.
How much current does MCP6044-I/ST consume?
The MCP6044-I/ST has a typical quiescent current of 600 nA for the four-amplifier device. According to the MCP6044 family datasheet, each amplifier draws less than 1.0 µA of quiescent current under the stated operating conditions. This low supply demand makes the part suitable for battery-operated sensor interfaces and other continuously powered analog systems.
Where can I download the MCP6044-I/ST datasheet PDF?
The official MCP6044-I/ST documentation is available through the Microchip MCP6044 product page, which links to the family datasheet. The product page is the preferred source because it also identifies the available package and ordering options. The MCP6044 family datasheet covers electrical characteristics, pin descriptions, typical application circuits, and operating limits for the 14-pin TSSOP version.
Where can I find the MCP6044-I/ST pinout?
The MCP6044-I/ST pinout is shown in the pin-description table and package drawing of the Microchip MCP6044 family datasheet. The device uses a 14-pin TSSOP with four rail-to-rail input/output amplifiers, a positive supply pin, and a negative supply pin. Use the manufacturer pin table when assigning PCB nets because the exposed package dimensions and pin numbering must follow the specified TSSOP footprint.
What can replace MCP6044-I/ST as a drop-in part?
The closest identified same-footprint option is MCP6044T-I/ST, which uses the same 14-pin TSSOP format and retains the quad rail-to-rail amplifier arrangement. Treat it as a candidate rather than an unconditional substitute: verify temperature grade, marking, electrical limits, and qualification requirements against the original design. The MCP6044-I/ST can also be replaced by MCP6044-E/ST when its wider temperature qualification is acceptable.
What is the best cross-brand equivalent for MCP6044-I/ST?
No cross-brand drop-in equivalent can be confirmed from the manufacturer and distributor information associated with the MCP6044-I/ST. A valid replacement must match the 14-pin TSSOP pinout while preserving the 1.4 V to 5.5 V supply, rail-to-rail input/output behavior, low-noise performance, and channel-to-channel pin arrangement. Use the Request a Quote form to request help identifying a source that can verify a specific cross-brand candidate.
MCP6044-I/ST vs MCP6044T-I/ST: which is better for a low-voltage design?
Both devices are presented in the same 14-pin TSSOP family context, but selection depends on the exact ordering-temperature and qualification requirements of the design. The MCP6044-I/ST is rated from -40°C to +85°C, while the alternate ordering code must be checked separately before substitution. Confirm supply range, electrical characteristics, lifecycle status, and marking against the manufacturer documents rather than relying only on package similarity.
When should I choose MCP6044-I/ST over a higher-bandwidth amplifier?
Choose MCP6044-I/ST when four low-frequency, low-power signal-conditioning channels are more important than wide bandwidth. Its 14 kHz gain-bandwidth product is suitable for sensors, slow analog measurements, and buffering, but it is not intended for high-speed video, RF, or pulse applications. Select a faster amplifier when signal edges, phase margin, or closed-loop bandwidth requirements exceed the MCP6044 capabilities.
Is MCP6044-I/ST suitable for battery-powered sensor interfaces?
The MCP6044-I/ST is suitable for many battery-powered sensor interfaces because it operates from 1.4 V to 5.5 V, supports rail-to-rail inputs and outputs, and has 600 nA typical quiescent current. Its approximately 170 nV/√Hz input-noise density and 1 pA input-bias current are useful when reducing sensor-signal error. Battery life must also account for sensor current and the amplifier's load-dependent supply demand.
Where to buy MCP6044-I/ST online?
Use the Request a Quote form on this page to request MCP6044-I/ST availability, lot information, and a quotation for the required quantity. The form is the appropriate channel for current commercial terms without presenting temporary marketplace figures as permanent pricing. Specify the required quantity, packaging preference, and whether traceability or inspection documentation is needed.
What is the price of MCP6044-I/ST?
Current MCP6044-I/ST pricing depends on quantity, inventory, and order configuration, so it should be confirmed through the Request a Quote form on this page. The form allows buyers to request the current unit and volume-break structure for the exact MPN without relying on a stale listing. Include the required order quantity and any traceability, inspection, or delivery requirements in the request.
What is the lead time and stock status for MCP6044-I/ST?
Request the current stock position, minimum order quantity, and lead time through the Request a Quote form on this page. Availability can vary with production inventory, package quantity, and order size, so an unconfirmed listing should not be treated as a stock guarantee. Provide the required delivery date and target quantity when requesting a quotation and current fulfillment estimate.
Does MCP6044-I/ST meet RoHS and automotive qualification requirements?
The MCP6044-I/ST is identified as RoHS compliant in its product listing, but the device is not identified as AEC-Q100 qualified. According to Microchip product information, the MCP6044 family is offered in standard package options; automotive qualification should therefore be confirmed for a specific automotive-qualified ordering variant. Use RoHS as a material-compliance statement, not as evidence of automotive-grade qualification.

Mühendislik referans verileri: MCP6044-I/ST — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose MCP6044-I/ST for compact, low-power analog signal conditioning with four channels, a 1.4 V to 5.5 V supply, and rail-to-rail input/output operation. It is well suited to slow sensor measurements, current sensing, buffering, and portable systems where board area and standby current matter. MCP6044T-I/ST is the closest identified ordering option in the same 14-pin TSSOP format, but temperature, qualification, marking, and lifecycle conditions must be checked before substitution. MCP6044-E/ST may be preferable when a wider temperature-rated family option is appropriate. Neither same-family option should be treated as an automatic replacement without comparing the exact ordering code and electrical limits. A higher-bandwidth amplifier is a better choice for fast signals, high-amplitude waveforms, or applications requiring greater phase margin than the MCP6044's 14 kHz gain-bandwidth product.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün MCP6044T-I/ST MCP6044-E/ST
Brand Microchip Technology Microchip Technology Microchip Technology
Package 14-pin TSSOP 14-pin TSSOP 14-pin TSSOP
Number of Amplifiers 4 channels 4 channels 4 channels

Ana Farklılayıcılar

  • Four low-power amplifiers in one compact TSSOP (karşılaştırma:MCP6044T-I/ST)
  • Low-voltage rail-to-rail signal operation (karşılaştırma:MCP6044-E/ST)
  • Low quiescent demand for always-on analog systems (karşılaştırma:MCP6044T-I/ST)

Tasarım Notları

Place the supply-decoupling capacitor immediately between the V+ and V- pins, and route each amplifier's feedback and input components to minimize loop area. Because the MCP6044-I/ST is intended for low-noise and low-power analog systems, keep digital switching paths and high-current return currents away from the amplifier inputs. Use a continuous ground reference under the TSSOP where board layout permits.

Do not treat the rail-to-rail output as an ideal zero-volt swing. Verify output voltage and headroom against the load current and operating supply using the family datasheet. Similarly, unused amplifier inputs must be connected to a valid common-mode voltage, commonly ground, so that input bias current does not create an uncontrolled operating point.

The approximately 170 nV/√Hz input-noise density is appropriate for many slow sensor and audio signals, but the 14 kHz gain-bandwidth product limits usable closed-loop bandwidth. Use modest signal amplitudes and verify capacitive-load stability before driving long cables or large loads. For high-frequency, high-amplitude, or precision demanding signals, select an amplifier with lower noise, greater bandwidth, and tighter offset specifications.

Uyumluluk Bilgisi

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Qualified
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The product listing identifies the MCP6044-I/ST as RoHS compliant. Automotive qualification is not identified for this ordering code.

İlgili Aramalar

mcp6044 datasheet MCP6044-I/ST datasheet MCP6044-I/ST datasheet pdf MCP6044-I/ST pinout MCP6044-I/ST TSSOP-14 footprint MCP6044-I/ST operating voltage MCP6044-I/ST quiescent current MCP6044-I/ST input noise MCP6044-I/ST drop-in replacement MCP6044-I/ST vs MCP6044T-I/ST Microchip MCP6044-I/ST MCP6044-I/ST price MCP6044-I/ST stock MCP6044-I/ST sensor amplifier MCP6044-I/ST current sensing

İlgili Bileşenler ve Terimler

Microchip Technology MCP6044-I/ST MCP6044T-I/ST MCP6044-E/ST MCP6044 operational amplifier op amp quad amplifier analog IC semiconductor rail-to-rail input rail-to-rail output low-dropout low-power amplifier precision signal conditioning 1.4 V minimum supply 5.5 V maximum operating supply 600 nA quiescent current 170 nV/√Hz input noise 14 kHz gain-bandwidth product 3 V/µs slew rate 14-pin TSSOP surface-mount package RoHS sensor interface current sensing battery-powered electronics
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle