NXP Semiconductors

MKL25Z32VFM4 - 48MHz Cortex-M0+ 32KB Flash USB MCU | NXP

MPN: MKL25Z32VFM4 ✓ Aktif
32-HVQFN (5 x 5 mm), 0.5 mm pitch Package 48 MHz Speed 32 KB (32K x 8) Memory
MOQ: 1 |

MKL25Z32VFM4 Genel Bakış

NXP Semiconductors MKL25Z32VFM4 is a 32-bit ARM Cortex-M0+ Kinetis KL2 microcontroller operating at up to 48 MHz with 32 KB of flash memory and 4 KB of SRAM, housed in a 32-HVQFN (5 x 5 mm) surface-mount QFN package. It integrates a full-speed USB 2.0 On-The-Go controller, which makes it one of the smallest USB-capable low-power MCUs available.

A microcontroller (MCU) is a single integrated circuit containing a CPU core, memory, and peripherals on a single die. The ARM Cortex-M0+ architecture used here is a compact, low-cost 32-bit processor defined by the Arm Architecture Compact Instruction set, intended for cost-sensitive embedded control. In the Kinetis family hierarchy the MKL25Z32VFM4 sits in the KL2 sub-family, which extends the KL1x line by adding a full-speed USB 2.0 OTG controller or a full-speed crystal-less USB 2.0 device controller. That positioning makes it a natural fit for USB-connected sensors, dongles, and low-power data acquisition nodes.

Key features include a 48 MHz Cortex-M0+ core, 32 KB (32K x 8) on-chip flash for program storage, 4 KB of SRAM for working memory, and a full-speed USB 2.0 device/OTG controller that can be clocked from an internal oscillator, removing the need for an external crystal when precision timing is not required. The part is offered in a 32-HVQFN 5 x 5 mm package with a 0.5 mm pitch, allowing a very small board footprint for USB dongles and wearable accessories.

Technically, the KL2 sub-family is designed for ultra-low-power operation: the core sleeps with a low active current and the part can be clocked from the internal 8 MHz oscillator trimmed to USB accuracy, saving both board area and BOM cost. The KL25 series is source-compatible with the Kinetis K20 (Cortex-M4) MCUs and with the rest of the Kinetis KL1x, KL2x, KL3x and KL4x families, giving a clear migration path when a design outgrows its memory budget or peripheral set. The reference manual covering MKL25Z32VFM4 and its siblings is document KL25P80M48SF0RM.

Typical applications include USB-to-serial adapters, HID and CDC class dongles, low-power environmental sensing nodes, battery-operated portable measurement instruments, USB-connected battery chargers, and compact industrial data acquisition modules where a full-size 48 MHz Cortex-M4 would be unnecessary.

When designing around this device, pay attention to the exposed-pad ground connection and the USB D+/D- routing. The 5 x 5 mm HVQFN has a limited thermal escape area, so for sustained high clock rates with USB traffic, pour a full ground plane beneath the package and keep the USB trace pair short, 50-ohm differential-impedance controlled, and free of test-point stubs.

This page consolidates manufacturer part data, package and memory details, drop-in same-footprint alternatives in the 32-QFN 5 x 5 mm land pattern, and practical layout and USB routing guidance into a single engineering reference that goes beyond a distributor catalogue listing.

Drop-in alternatifler için MKL25Z32VFM4 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller MKL25Z32VFM4 (aynı form faktörü ve ayağa oturma) — farklı olan Architecture, Flash Memory, Package, Product Family, SRAM.

NXP Semiconductors
Architecture: 32-bit RISC
Flash Memory: 64 KB (64K x 8 bits)
Package: 32-HVQFN (5 mm x 5 mm)
İle Karşılaştır MKL25Z32VFM4 →

MKL25Z64VFM4

✅ Yerleştirme
NXP Semiconductors
📦 32-HVQFN (5x5)
32-bit ARM Cortex-M0+ microcontroller · Kinetis KL25 / Kinetis KL2 · 48 MHz · ARM Cortex-M0+ · 32-bit RISC · 64 KB (64K x 8 bits) · 8 KB · Full-speed USB 2.0

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MKL25Z128VFM4

✅ Yerleştirme
📦 32-HVQFN (5x5)
Same 32-HVQFN 5x5 mm footprint and 48 MHz Cortex-M0+ core, flash increases from 32 KB to 128 KB (+300%), USB 2.0 controller and 4 KB SRAM unchanged

📋 Katalogda Olmayan Referans Alternatifi

MKL26Z32VFM4

✅ Yerleştirme
📦 32-HVQFN (5x5)
Same 32-HVQFN 5x5 mm footprint, same 48 MHz Cortex-M0+ core with 32 KB flash and USB 2.0, KL26 adds extra ADC/GPIO peripheral resources versus KL25

📋 Katalogda Olmayan Referans Alternatifi

MKL24Z32VFM4

✅ Yerleştirme
📦 32-HVQFN (5x5)
Same 32-HVQFN 5x5 mm footprint, same 48 MHz Cortex-M0+ core, 32 KB flash and 4 KB SRAM, but the KL24 has no full-speed USB 2.0 controller (USB peripheral count -1 vs MKL25Z32VFM4)

📋 Katalogda Olmayan Referans Alternatifi

MKL25Z32VFT4

✅ Yerleştirme
📦 32-HVQFN (5x5)
Identical die and 32-HVQFN 5x5 mm footprint with 48 MHz Cortex-M0+, 32 KB flash and USB 2.0, but a commercial temperature grade instead of the extended grade of MKL25Z32VFM4

📋 Katalogda Olmayan Referans Alternatifi

MKL25Z32VFM4 Maksimum Değerlendirmeler & Elektriksel Özellikler

Core Processor ARM Cortex-M0+ (32-bit)
Maximum CPU Frequency 48 MHz
Flash Memory 32 KB (32K x 8)
SRAM 4 KB
Product Family Kinetis KL2 (KL25)
USB Controller Full-speed USB 2.0 OTG / crystal-less device controller
Architecture Arm Cortex-M0+ compact instruction set, 32-bit
Paket 32-HVQFN (5 x 5 mm), 0.5 mm pitch
Montaj Türü Surface Mount
Terminal Count 32 pins
Family Software Compatibility Compatible with Kinetis K20, KL1x, KL2x, KL3x and KL4x MCUs

MKL25Z32VFM4 32-hvqfn (5 x 5 mm), 0.5 mm pitch Pin Yapısı Kılavuzu

MKL25Z32VFM4 (32-hvqfn (5 x 5 mm), 0.5 mm pitch paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.

32-hvqfn (5 x 5 mm), 0.5 mm pitch paket pin çizelgesi için MKL25Z32VFM4

Ayrıntılı pin çıkış verisi mevcut değil: MKL25Z32VFM4.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

MKL25Z32VFM4 için uygundur 6 uygulamas: USB HID and CDC Peripherals, Battery-Powered Environmental Sensing, Portable Measurement Instruments, USB-to-RS232 and Industrial Gateways, Wearables and Personal Electronics, USB Battery Charging and Power Management.

🔌

USB HID and CDC Peripherals

The MKL25Z32VFM4 fits USB dongles, keypad and mouse interfaces, and CDC-class adapters because it integrates a full-speed USB 2.0 device controller directly on the die, so no separate USB bridge IC is required. Because the KL2x family includes a crystal-less USB device controller, the PHY can run from the internal trimmed oscillator and the external 24 MHz crystal plus its load capacitors can be left off the board, which saves both BOM cost and layout area in a compact dongle form factor. The 48 MHz Cortex-M0+ core handles enumeration, HID report generation and command parsing comfortably, while 32 KB of flash and 4 KB of SRAM are sufficient for typical HID or CDC class firmware. The main trade-off is that the 32 KB flash budget limits protocol stack complexity, so designs that add composite USB classes should step up to the 64 KB variant.

🧩

Battery-Powered Environmental Sensing

For battery-operated environmental and industrial sensing nodes, the MKL25Z32VFM4 offers a compact control solution that combines a 48 MHz ARM Cortex-M0+ core with the ultra-low-power design of the Kinetis KL2 sub-family. The controller runs sensor duty-cycled measurement sequences and reports results over the on-board full-speed USB device controller, which simultaneously powers the node from a host port and carries data, eliminating a separate radio or battery charger in USB-deployed installations. With 4 KB of SRAM and 32 KB of flash, typical applications hold a calibration table, a periodic log buffer and a small state machine. The 32-HVQFN 5 x 5 mm footprint keeps the node small, and the reduced-leakage sleep modes help extend the interval between service visits.

📊

Portable Measurement Instruments

The MKL25Z32VFM4 is a strong fit for compact handheld meters and portable test instruments where a USB port is the primary interface to a laptop. The on-chip full-speed USB 2.0 controller streams samples to the host, and the 48 MHz Cortex-M0+ core provides the timing headroom for continuous conversion loops and front-panel logic. Because the USB device controller can run without an external crystal, the instrument designer keeps the board small while still supporting USB enumeration for a direct driverless data path. The 32 KB flash supports a bootloader plus the measurement firmware, and 4 KB of SRAM covers sample buffering in typical single-channel or low-channel acquisition setups. When a firmware update path with two image slots is needed, the 64 KB sibling in the same footprint is the usual upgrade.

🏭

USB-to-RS232 and Industrial Gateways

In industrial gateway and converter designs the MKL25Z32VFM4 bridges a USB host port to downstream serial or field-bus circuitry, combining a 48 MHz Cortex-M0+ core with the USB 2.0 device controller in a single 32-HVQFN 5 x 5 mm package. The core handles protocol translation, buffering of received frames and simple supervisory logic without a discrete USB interface chip, which reduces board area and cost in multi-port gateway products. Its low-power modes are valuable in gateways that run from a single rail and must survive long idle periods, and the small land pattern leaves routing room for the downstream transceivers. Engineers typically pair it with a dedicated RS-232 or isolation transceiver and pay attention to the exposed pad ground connection and to keeping the USB differential pair short.

📱

Wearables and Personal Electronics

The MKL25Z32VFM4 suits wearables and personal electronic accessories that expose a USB charging or configuration port, because the integrated full-speed USB device controller handles enumeration while the ultra-low-power Kinetis KL2 architecture keeps standby consumption low between interactions. The 5 x 5 mm HVQFN package is small enough for tight enclosures, and the 48 MHz Cortex-M0+ core is more than sufficient for gesture, step-count or haptic-control workloads with 32 KB of flash for application code and 4 KB of SRAM for state. Because the family can be clocked from the internal oscillator for USB operation, a crystal-less design further shrinks the wearable board. The trade-off is that the 32 KB memory ceiling limits rich UI logic, so wearables needing graphics or extensive data logging should use a larger-memory part in the same footprint.

⚡

USB Battery Charging and Power Management

The MKL25Z32VFM4 is well suited to USB-powered charger and portable power modules where the MCU must negotiate with the host, manage a power path and report status over the same cable. The integrated full-speed USB 2.0 controller removes the need for a discrete USB interface device, and the KL2 family's crystal-less operation means the charger module can enumerate from the internal oscillator when cost is critical. The 48 MHz Cortex-M0+ core is fast enough to run the USB stack alongside state-machine-based charge control and current-loop supervision. Four kilobytes of SRAM accommodates the control state and measurement buffers, and 32 KB of flash holds the USB descriptors and control firmware. The small 32-HVQFN footprint suits compact adapters, though designs needing larger descriptor tables or data logging should step to the 64 KB or 128 KB siblings.

Where to buy MKL25Z32VFM4 online?
The MKL25Z32VFM4 is listed as active by NXP Semiconductors and is stocked by multiple authorized distributors. Use the Request a Quote form on this page to check current availability, allocated quantity and lead time for the 32-HVQFN (5 x 5 mm) ordering code. Quote requests return a single consolidated response with pricing and delivery schedule rather than requiring you to compare multiple channels yourself.
What is the price of MKL25Z32VFM4?
Pricing on the MKL25Z32VFM4 is volume-dependent and changes daily, so no fixed figure is published here. Submit a quote request through the Request a Quote form on this page and the current single-unit and volume tier pricing will be returned for the exact 32-HVQFN package suffix. The last published unit reference for this exact MPN was 4.04 USD as of 2026-11, which is an archived listing value rather than a live quotation.
What is the lead time for MKL25Z32VFM4?
Lead time for the MKL25Z32VFM4 depends on the quantity and the packaging suffix you need. NXP lists the part as active with standard industrial and automotive-style orderable configurations, so factory lead times are typically normal for an in-production Kinetis KL25 device. Request the current lead time and minimum order quantity through the Request a Quote form on this page, and specify tape-and-reel versus tray requirements there.
Is MKL25Z32VFM4 in stock?
The MKL25Z32VFM4 is offered in production and distributor listings show it as an active NXP part, but live stock levels move quickly and are not published on this page. Use the Request a Quote form to confirm current on-hand quantity, factory lead time and allocated stock for the 32-HVQFN 5 x 5 mm package before committing a build schedule.
What is the difference between MKL25Z32VFM4 and MKL26Z32VFM4?
The MKL26Z32VFM4 is the KL26 member of the Kinetis KL2x family and adds analog and general-purpose peripheral resources to the MKL25Z32VFM4 baseline, while keeping the same 48 MHz Cortex-M0+ core, 32 KB flash and 4 KB SRAM arrangement in the same 32-QFN 5 x 5 mm package. Both devices share the USB 2.0 full-speed controller. Choose KL26 when you need more ADC channels or GPIO than the KL25 offers; choose MKL25Z32VFM4 for the lowest-cost USB-capable option.
What is the difference between MKL25Z32VFM4 and MKL24Z32VFM4?
The MKL24Z32VFM4 belongs to the Kinetis KL24 sub-family, which is the same Cortex-M0+ 32-bit architecture with 32 KB flash and 4 KB SRAM in the same 32-QFN 5 x 5 mm footprint, but without the USB 2.0 controller that distinguishes the KL2x family. According to the NXP product documentation, the KL2x family adds a full-speed USB 2.0 OTG controller or a full-speed crystal-less USB 2.0 device controller to the KL1x series, so USB designs require the KL25.
When should I choose MKL25Z32VFM4 over MKL25Z64VFM4?
Choose the MKL25Z32VFM4 when 32 KB of flash and 4 KB of SRAM are sufficient for the application and unit cost is the priority. Choose the MKL25Z64VFM4 when firmware grows beyond 32 KB, when you add USB stack code or a larger protocol handler, or when you want room for OTA update slots. Both parts share the 32-HVQFN 5 x 5 mm package, so the same PCB footprint and layout works for either device.
Is MKL25Z32VFM4 suitable for a USB sensor node?
Yes. The MKL25Z32VFM4 integrates a full-speed USB 2.0 device controller and, per the KL25 documentation, can operate as a crystal-less USB device using the internal oscillator, which removes the need for a 24 MHz crystal and its load capacitors. That suits battery-powered environmental or industrial sensing nodes that plug directly into a USB port for power and data. The 32 KB flash is adequate for typical sensor protocols such as HID, CDC or vendor-specific classes.
What is the best drop-in replacement for MKL25Z32VFM4?
The best drop-in replacements are the same-footprint 32-HVQFN (5 x 5 mm) Kinetis KL25 devices: the MKL25Z64VFM4 with 64 KB flash, the MKL25Z128VFM4 with 128 KB flash, and the MKL25Z32VFT4 with a lower commercial temperature grade. For added peripheral headroom the MKL26Z32VFM4 is also pin-compatible in the same 32-QFN land pattern. All share the 48 MHz Cortex-M0+ core and the USB 2.0 controller.
Can MKL25Z32VFM4 replace KL24 without PCB changes?
No, not if the design uses USB. The MKL25Z32VFM4 and the MKL24Z32VFM4 occupy the same 32-QFN 5 x 5 mm footprint and share the 48 MHz Cortex-M0+ core with 32 KB flash and 4 KB SRAM, but only the KL2x family of the MKL25Z32VFM4 integrates the full-speed USB 2.0 controller. Dropping the KL25 into a KL24 board works only if the USB pins are left unused in the original design.
Where to download the MKL25Z32VFM4 datasheet PDF?
The official part page for the MKL25Z32VFM4 at nxp.com carries the KL25 sub-family data sheet as a downloadable PDF, and the KL25 Sub-Family Reference Manual document KL25P80M48SF0RM covers the register set for MKL25Z32VFM4, MKL25Z64VFM4, MKL25Z128VFM4 and their VFT4, VLH4 and VLK4 variants. Use the datasheet link on this page for the ordering code, pin assignments and electrical characteristics, and the reference manual for register-level detail.
Where to find the MKL25Z32VFM4 pinout?
Pin assignments for the MKL25Z32VFM4 are listed in the pin description tables of the NXP KL25 sub-family data sheet, arranged by package type for the 32-HVQFN (5 x 5 mm) option used by this ordering code. Use those tables when assigning PCB tracks and when checking which pins are tied to VDD, VSS, the USB D+/D- pair, reset and the SWD debug interface; the exposed thermal pad connection is also defined in the same package drawings.
How much flash and SRAM does the MKL25Z32VFM4 have?
The MKL25Z32VFM4 provides 32 KB (32K x 8) of on-chip flash memory for program storage and 4 KB of SRAM for run-time data, as listed in the NXP part documentation for the Kinetis KL25 32 KB variant. The flash figure is the same as the MKL25Z32VFT4, and the 64 KB and 128 KB siblings add flash without changing the package footprint.
What are the key specifications of MKL25Z32VFM4 that engineers should know?
The MKL25Z32VFM4 is a 48 MHz ARM Cortex-M0+ 32-bit microcontroller with 32 KB flash, 4 KB SRAM, a full-speed USB 2.0 OTG or crystal-less USB device controller, and a 32-HVQFN 5 x 5 mm package with 0.5 mm pitch. It belongs to the Kinetis KL2 (KL25) sub-family, which NXP documents as source-compatible with Kinetis K20 Cortex-M4 MCUs and with the KL1x, KL2x, KL3x and KL4x families, providing an in-family migration path when memory or peripheral needs grow.
What toolchain supports the MKL25Z32VFM4?
The MKL25Z32VFM4 is supported by the NXP Kinetis software toolchain, including the S32 Design Studio and MCU Express integrated development environments, plus the standard GNU Arm Embedded toolchain and CMSIS device support files for the Cortex-M0+ core. The KL25 Sub-Family Reference Manual document KL25P80M48SF0RM defines the register map used by all of these environments, and the same HAL and middleware used across Kinetis devices applies to this part.
Does the MKL25Z32VFM4 need an external crystal for USB?
No. According to the KL25 sub-family documentation, the KL2x family adds a full-speed USB 2.0 OTG controller or a full-speed crystal-less USB 2.0 device controller, meaning the MKL25Z32VFM4 can run its USB PHY from the internal trimmed oscillator rather than an external 24 MHz crystal. This reduces board area and BOM cost, though an external crystal is still advisable if you need high-accuracy timing for UART or CAN alongside USB.

Mühendislik referans verileri: MKL25Z32VFM4 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the MKL25Z32VFM4 when you need a USB-capable, low-power 32-bit controller at minimum cost: it delivers a 48 MHz ARM Cortex-M0+ core, 32 KB flash, 4 KB SRAM and a full-speed USB 2.0 device or OTG controller in a 32-HVQFN 5 x 5 mm package, and it can operate the USB PHY without an external crystal. Step up to the MKL25Z64VFM4 or MKL25Z128VFM4 when firmware size, dual-image updates or logging exceed the 32 KB ceiling; the footprint and pinout stay identical. Move to the MKL26Z32VFM4 if analog channels or GPIO count become the bottleneck while 32 KB flash still suffices. Use the MKL24Z32VFM4 only for designs that do not need USB at all, since it drops the USB controller. Finally, choose the MKL25Z32VFT4 when a commercial temperature grade is acceptable and you prefer the alternative supply configuration. No cross-brand drop-in replacement exists for this 32-QFN Kinetis land pattern, so migration is best handled within the Kinetis KL2 family.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün MKL25Z64VFM4 MKL25Z128VFM4 MKL26Z32VFM4 MKL24Z32VFM4 MKL25Z32VFT4
Package 32-HVQFN (5 x 5 mm) 32-HVQFN (5 x 5 mm) - same 32-HVQFN (5 x 5 mm) - same 32-HVQFN (5 x 5 mm) - same 32-HVQFN (5 x 5 mm) - same 32-HVQFN (5 x 5 mm) - same
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Core Processor ARM Cortex-M0+ (32-bit) ARM Cortex-M0+ (32-bit) ARM Cortex-M0+ (32-bit) ARM Cortex-M0+ (32-bit) ARM Cortex-M0+ (32-bit) ARM Cortex-M0+ (32-bit)
Maximum CPU Frequency 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz
Flash Memory 32 KB (32K x 8) 64 KB 128 KB 32 KB (32K x 8) 32 KB (32K x 8) 32 KB (32K x 8)
SRAM 4 KB 4 KB 4 KB 4 KB 4 KB 4 KB
USB Controller Full-speed USB 2.0 OTG / crystal-less device controller Full-speed USB 2.0 OTG / crystal-less device controller Full-speed USB 2.0 OTG / crystal-less device controller Full-speed USB 2.0 OTG / crystal-less device controller No USB 2.0 controller (KL24 sub-family) Full-speed USB 2.0 OTG / crystal-less device controller
Peripheral Set Kinetis KL25 baseline Kinetis KL25 baseline Kinetis KL25 baseline Kinetis KL26 with expanded analog and GPIO resources Kinetis KL24 baseline without USB Kinetis KL25 baseline, commercial temperature grade
Lifecycle Status Active Active Active Active Active Active

Ana Farklılayıcılar

  • On-die full-speed USB 2.0 controller (karşılaştırma:MKL24Z32VFM4)
  • Crystal-less USB operation (karşılaştırma:MKL25Z64VFM4)
  • Exact memory match for lean firmware (karşılaştırma:MKL25Z128VFM4)
  • Peripheral headroom via a pin-compatible step-up (karşılaştırma:MKL26Z32VFM4)
  • Family migration path across Kinetis (karşılaştırma:MKL25Z32VFT4)

Tasarım Notları

The 32-HVQFN 5 x 5 mm package has a small thermal escape area, so pour a continuous ground plane directly beneath the exposed pad and connect it with the same number of vias as the package drawing specifies. Keep the USB D+/D- differential pair short, referenced to the same ground plane, with no stubs to test points or connectors; a 90 ohm differential pair with matched length is the standard target for full-speed USB. Route the pair away from switching nodes and inductor areas to keep the USB PHY free of radiated noise.

Place all decoupling capacitors adjacent to the supply pins, with the bulk capacitor closest to the device, and provide a clean ground return for each capacitor rather than routing returns through the exposed pad region. Because the KL2x family can operate the USB device controller from the internal oscillator, omitting the 24 MHz crystal frees board area, but if an external crystal is fitted it must be placed next to the oscillator pins with a short ground guard, otherwise startup and enumeration margins shrink.

Two frequent design errors are mismatched memory expectations and incorrect temperature grade assumptions. The MKL25Z32VFM4 gives 32 KB of flash and 4 KB of SRAM; USB stacks, bootloader plus application images and logging quickly exhaust 32 KB, so plan the 64 KB or 128 KB sibling in the identical footprint early. Second, the VFM4 and VFT4 order codes differ in grade, so verify the suffix against the required ambient temperature range before releasing the BOM.

The Kinetis KL2 sub-family is built for low-power operation, but USB activity raises the average current draw well above sleep current. Estimate the average supply requirement from the USB enumeration and polling duty cycle plus the load current of attached peripherals, then size the 3.3 V rail and its decoupling for that average rather than the sleep figure. Using the internal oscillator saves the crystal's supply load and its associated capacitors, which helps in battery-backed installations where the node is powered from the USB port.

Do not assume a drop-in from a non-NXP Cortex-M0+ MCU. The MKL25Z32VFM4 pinout follows the Kinetis 32-QFN 5 x 5 mm arrangement, with the USB pins, SWD debug interface, reset and power pins positioned per the KL25 sub-family data sheet pin description tables; a generic 32-QFN MCU will not match these functions. Verify every pin in the data sheet tables and confirm that the USB D+/D- lines are connected to the correct connector pins for the chosen device class.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

NXP lists the MKL25Z32VFM4 as active with environmental quality and shipping information provided on the official part page, but the specific RoHS, REACH, halogen-free and conflict-minerals declarations were not available in the retrieved listing content, so they are recorded as unknown. The device is a microcontroller, so AEC-Q100 qualification is not applicable unless a -Q1 automotive order code is selected.

Veri doğrulanma tarihi: 2026-11-19 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

MKL25Z32VFM4 datasheet MKL25Z32VFM4 pinout MKL25Z32VFM4 datasheet pdf MKL25Z32VFM4 equivalent MKL25Z32VFM4 replacement MKL25Z32VFM4 vs MKL26Z32VFM4 MKL25Z32VFM4 price MKL25Z32VFM4 footprint NXP MKL25Z32VFM4 MKL25Z32VFM4 application circuit 32 QFN 5x5 Cortex-M0+ USB microcontroller Kinetis KL25 crystal-less USB OTG MCU

İlgili Bileşenler ve Terimler

NXP Semiconductors MKL25Z32VFM4 MKL25Z64VFM4 MKL25Z128VFM4 MKL26Z32VFM4 MKL24Z32VFM4 MKL25Z32VFT4 ARM Cortex-M0+ Kinetis KL2 Kinetis KL25 microcontroller MCU embedded system system-on-chip semiconductor 32-bit CPU flash memory SRAM USB 2.0 OTG full-speed USB crystal-less USB device controller 32-HVQFN QFN family surface mount SMD low-power design
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle