Texas Instruments

MSP430I2020TPW - 16MHz 24-Bit Metering MCU | Texas Instruments

MPN: MSP430I2020TPW ✓ Aktif
2.5 V or 3.3 V Vdss 28-pin TSSOP (PW) Package 16.384 MHz Speed 16 KB Memory
MOQ: 1 |

MSP430I2020TPW Genel Bakış

Texas Instruments MSP430I2020TPW is a 16-bit mixed-signal metering microcontroller with a 16 MHz CPU, two 24-bit sigma-delta ADCs, two 16-bit timers, 16 KB of Flash memory, and 1 KB of RAM, housed in a 28-pin TSSOP package. The device combines an MSP430 low-power RISC core with analog-to-digital conversion and metering peripherals for energy, power, and sensor-measurement systems.

A mixed-signal microcontroller is a semiconductor that combines a digital processing core with analog measurement functions. Within the product hierarchy, the MSP430I2020 is a mixed-signal MCU, part of the MSP430 family and the broader power-management and metering ecosystem. Its sigma-delta ADC channels are intended to measure slowly varying or multiplexed analog signals accurately while keeping the external analog signal chain compact. This integration reduces component count compared with separate MCU and ADC designs.

The headline features are a 16.384 MHz maximum listed clock, 24-bit ADC resolution on two channels, 16 KB Flash, 1 KB RAM, and a 28-pin TSSOP package. Two 16-bit timers support timing, sampling, modulation, and periodic measurement tasks. According to the Texas Instruments MSP430I2020 product page, the device operates from 2.5 V or 3.3 V and is specified for an industrial temperature range of -40 °C to 105 °C.

The MSP430 CPU16 architecture uses a reduced instruction set and a 16-bit register model optimized for low-power embedded control. Sigma-delta ADCs trade conversion speed for high resolution and noise performance, making the device appropriate for metering rather than high-speed waveform capture. The MSP430I2020 family shares an established hardware and software ecosystem, including the EVM430-I2040S evaluation module and the MSP-TS430RHB32A target board identified by Texas Instruments.

Typical applications include single-phase energy meters, smart-grid sensing nodes, industrial power monitors, current-and-voltage measurement boards, low-cost isolated data loggers, and compact sensor-hub products. The two ADC channels can be paired with suitable current and voltage front ends, while the timers coordinate sampling and communications. Firmware selection, calibration strategy, and external signal-conditioning components remain central to achieving useful metering accuracy.

For a new design, begin with the MSP430I2020 datasheet pin-description table, the MSP430I2xx User Guide, and the applicable metering reference design. Check analog input ranges, exposed ground connections, debugger access, and decoupling requirements against the selected board architecture. Do not treat a family member with a different ADC-channel count as an automatic replacement without reviewing its pinout and firmware requirements.

This page combines the manufacturer specifications, package details, family alternatives, application guidance, and engineering-focused selection notes needed to evaluate the MSP430I2020TPW for embedded metering and monitoring designs.

Drop-in alternatifler için MSP430I2020TPW — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller MSP430I2020TPW (aynı form faktörü ve ayağa oturma) — farklı olan Flash Memory, RAM, Package, ADC Architecture, ADC Resolution.

Texas Instruments
Flash Memory: 32KB (32K x 8)
RAM: 2KB
Package: TSSOP (PW), 28 pins
İle Karşılaştır MSP430I2020TPW →
Texas Instruments
Flash Memory: 32 KB
RAM: 2 KB
ADC Architecture: 24-bit sigma-delta
İle Karşılaştır MSP430I2020TPW →

MSP430I2021TPW

✅ Yerleştirme
📦 28-pin TSSOP (PW)
ADC channel count is 1 channel versus 2 channels on MSP430I2020TPW, a 50% reduction

📋 Katalogda Olmayan Referans Alternatifi

MSP430I2022TPW

✅ Yerleştirme
📦 28-pin TSSOP (PW)
ADC channel count is 2 channels, matching MSP430I2020TPW, while device-specific timer and interface resources require verification

📋 Katalogda Olmayan Referans Alternatifi

MSP430I2031TPWR

✅ Yerleştirme
Texas Instruments
📦 28-pin TSSOP (PW)
16-bit RISC CPU (MSP430 CPU16) · 16.384 MHz · 32KB (32K x 8) · 2KB · 24-bit sigma-delta (SD24) · 3 · 2 x 16-bit · -40C to +105C

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MSP430I2041TPW

✅ Yerleştirme
Texas Instruments
📦 28-pin TSSOP (PW)
16-bit RISC · 16.384 MHz · 16 MHz · 24-bit sigma-delta · 4 channels · 2 timers · 16-bit · 32 KB

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MSP430I2020TPW Maksimum Değerlendirmeler & Elektriksel Özellikler

Product Type Mixed-signal metering microcontroller
CPU Architecture MSP430 CPU16, 16-bit RISC
Azami Saat Hızı 16.384 MHz
ADC Architecture 2-channel sigma-delta ADC
ADC Resolution 24-bit per channel
Timer Count 2 timers, 16-bit each
Flash Memory 16 KB
RAM 1 KB
Besleme Gerilimi 2.5 V or 3.3 V
İşletim Sıcaklığı -40 °C to 105 °C
Paket 28-pin TSSOP (PW)
Terminal Count 28 pins
Montaj Türü Surface mount
Device Family MSP430I2xx metering MCU family

MSP430I2020TPW 28-pin tssop (pw) Pin Yapısı Kılavuzu

MSP430I2020TPW (28-pin tssop (pw) paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.

28-pin tssop (pw) paket pin çizelgesi için MSP430I2020TPW

Ayrıntılı pin çıkış verisi mevcut değil: MSP430I2020TPW.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

MSP430I2020TPW için uygundur 6 uygulamas: Single-Phase Smart Energy Meter, Industrial Power-Monitoring Terminal, Smart-Grid Sensor Node, Battery-Powered Sensor Hub, Compact Data-Acquisition Module, Precision Low-Power Instrument.

⚡

Single-Phase Smart Energy Meter

MSP430I2020TPW fits a single-phase energy-meter architecture where the meter must measure two analog quantities, such as voltage and current. Its two 24-bit sigma-delta ADC channels provide the resolution needed for compensated energy calculations, while two 16-bit timers can organize sampling and accumulation intervals. The 16 KB Flash supports metering firmware, calibration tables, and communication routines, and the 1 KB RAM accommodates working state. Use isolated current and voltage sensing front ends, a suitably referenced analog section, and an external communications interface as required by the meter architecture.

🏭

Industrial Power-Monitoring Terminal

The MSP430I2020TPW can serve as the control center of a compact industrial power-monitoring terminal. Two 24-bit sigma-delta channels can acquire voltage and current-related sensor outputs, while the 16.384 MHz MSP430 CPU16 handles filtering, scaling, threshold evaluation, and event reporting. Two 16-bit timers support periodic measurements without blocking the main control flow. The industrial -40 °C to 105 °C rating and 2.5 V or 3.3 V operation suit equipment designed for factory and building environments, although an industrial enclosure must provide the required isolation and environmental protection.

🌐

Smart-Grid Sensor Node

MSP430I2020TPW is appropriate for a compact smart-grid sensing node that measures two analog channels and performs local calculations before transmitting results. The MSP430 architecture supports low-power operation, and the two 24-bit sigma-delta ADCs are well matched to voltage and current sensing rather than high-speed waveform acquisition. Two timers can establish accurate sampling schedules, while 16 KB Flash holds protocol and calibration code. Pair the MCU with isolated sensing hardware and a communications module when the node must interface with utility or building-management infrastructure.

🧩

Battery-Powered Sensor Hub

A battery-powered environmental or industrial sensor hub can use MSP430I2020TPW when two analog inputs provide sufficient measurement capacity and 16 KB Flash is adequate for embedded control. The low-power MSP430 CPU16 can remain inactive between measurements, while the two 16-bit timers trigger periodic sampling. The 24-bit ADC resolution can improve the usable dynamic range of resistive, current-output, or temperature-derived sensor signals. Power-budget calculations should include sensor standby current, analog bias current, regulator quiescent current, and radio duty cycle because the MCU alone does not determine the complete battery life.

🖥️

Compact Data-Acquisition Module

MSP430I2020TPW can form the core of a compact two-channel data-acquisition module for slowly varying process signals. The 24-bit sigma-delta converters provide high nominal resolution, while the MSP430 CPU16 performs scaling, offset correction, filtering, and timestamped control. Two 16-bit timers allow accurate periodic acquisition without excessive polling overhead, and the 16 KB Flash and 1 KB RAM support a focused embedded application. Signal bandwidth, input range, common-mode voltage, and isolation must be assessed because high ADC resolution does not by itself guarantee accuracy for fast or high-voltage inputs.

🔧

Precision Low-Power Instrument

MSP430I2020TPW suits a precision instrument that combines measurement, control, and a limited local display interface. Two high-resolution ADC channels can acquire sensor outputs, while the timers support periodic sampling and calibration routines. The microcontroller's 16 KB Flash can hold a dedicated control application and compensation coefficients, and its 1 KB RAM is sufficient for focused state handling. For instrumentation applications, pay particular attention to analog-reference stability, grounding, calibration storage, display-driver timing, and the distinction between ADC resolution and the uncertainty of the complete measurement chain.

What are the key specifications of MSP430I2020TPW?
The MSP430I2020TPW is a 16-bit mixed-signal metering MCU with a 16.384 MHz CPU, two 24-bit sigma-delta ADCs, two 16-bit timers, 16 KB Flash, and 1 KB RAM in a 28-pin TSSOP package. Texas Instruments identifies the device for 2.5 V or 3.3 V operation and an industrial temperature range of -40 °C to 105 °C. These specifications make it suitable for energy measurement, industrial monitoring, and sensor-oriented control systems.
What is MSP430I2020TPW used for?
MSP430I2020TPW is used for low-power metering, power monitoring, and analog-sensor measurement designs. Its two 24-bit sigma-delta ADC channels suit high-resolution measurements of slowly varying analog signals, while the MSP430 CPU16 handles calculation, control, and communications. Typical uses include smart energy meters, current-and-voltage monitoring, industrial power-quality products, and compact data-acquisition nodes.
How many ADC channels and timers does MSP430I2020TPW have?
MSP430I2020TPW provides two 24-bit sigma-delta ADC channels and two 16-bit timers. The two ADC channels support measurement architectures that need more than one analog input, while the timers can handle sampling intervals, periodic calculations, timing functions, and communication-related tasks. Texas Instruments lists these metering AFE features on the official MSP430I2020 product page.
What is the operating voltage range of MSP430I2020TPW?
MSP430I2020TPW is specified for 2.5 V or 3.3 V operation. The exact allowable supply limits, analog reference arrangement, and power-sequencing requirements must be confirmed in the manufacturer data sheet for the selected board configuration. A 3.3 V supply is generally convenient for modern industrial and metering designs, while 2.5 V operation can reduce power consumption in compact systems.
Where can I download the MSP430I2020TPW datasheet PDF?
The official MSP430I2020TPW data sheet is available through Texas Instruments at https://www.ti.com/lit/gpn/msp430i2020, and the ordering-specific page is https://www.ti.com/product/MSP430I2020/part-details/MSP430I2020TPW. The family document covers the MSP430I204x, MSP430I203x, and MSP430I202x mixed-signal microcontrollers. Use the pin-description and electrical-characteristics tables for the exact PW package variant.
Where can I find the MSP430I2020TPW pinout?
The MSP430I2020TPW pin assignments are shown in the pin-description table of the Texas Instruments MSP430I2020 family data sheet and on the MSP430I2020 ordering page. The device uses a 28-pin TSSOP package with power, ground, analog inputs, and control or communications functions. Confirm every signal and exposed connection against the exact package drawing before assigning PCB tracks or making continuity assumptions.
What is the temperature range of MSP430I2020TPW?
MSP430I2020TPW is specified over -40 °C to 105 °C, placing it in the industrial temperature class. The operating-temperature entry shown by Texas Instruments applies to the MSP430I2020TPW ordering option. Final equipment qualification must also account for local ambient temperature, regulator tolerance, self-heating, enclosure conditions, and the thermal performance of the assembled PCB.
Is MSP430I2020TPW suitable for energy metering?
MSP430I2020TPW is suitable for metering applications that require two high-resolution analog measurement channels and low-power embedded processing. Its two 24-bit sigma-delta ADCs support accurate current or voltage sensing, while the 16-bit timers can coordinate sampling and measurement timing. Application accuracy still depends on analog front-end design, calibration, reference quality, mains-safety requirements, and firmware compensation.
MSP430I2020TPW vs MSP430I2041TPWR - which is better?
MSP430I2020TPW is preferable when two 24-bit ADC channels are sufficient, while MSP430I2041TPWR offers the larger I204x metering family with more ADC channels. The difference is functional rather than universal: choose I2020 for the simpler two-channel design and I2041 when concurrent or additional measurements are required. Review the family data sheet and pin assignments because added ADC functionality can affect board configuration.
When should I choose MSP430I2020TPW over MSP430I2021TPW?
Choose MSP430I2020TPW when the design requires two 24-bit sigma-delta ADC channels; MSP430I2021TPW belongs to the lower-channel-count side of the same metering family. The I2020 configuration is appropriate for metering designs where two analog inputs meet the measurement requirements. Choose the alternative when fewer ADC channels are sufficient and its other resource and interface requirements better match the product.
Is MSP430I2020TPW the same as MSP430I2022TPW?
MSP430I2020TPW and MSP430I2022TPW belong to the same MSP430I202x metering family, but they should not be treated as automatically identical devices. The I2020 is characterized by two 24-bit ADC channels, while exact ADC, timer, memory, and interface details for I2022 must be checked in the family data sheet. Confirm pin-to-pin compatibility and firmware implications before substitution.
What can replace MSP430I2020TPW?
A drop-in replacement should use the same 28-pin PW TSSOP footprint and provide equivalent pin assignments, power requirements, ADC functions, timers, memory, and firmware support. MSP430I2021TPW, MSP430I2022TPW, MSP430I2031TPW, and MSP430I2041TPW are same-brand family candidates, but their ADC-channel counts differ. No cross-brand drop-in replacement is established here, so firmware and board compatibility must be checked explicitly.
What is the best Texas Instruments equivalent for MSP430I2020TPW?
The closest same-brand choices are other devices in the MSP430I202x, MSP430I203x, and MSP430I204x metering families, subject to ADC-channel requirements. MSP430I2020TPW has two 24-bit ADC channels; I2031 and I2041 family options provide more measurement channels, while I2021 and I2022 support different lower-channel configurations. The correct choice depends on channel count, package, resources, and validated firmware behavior.
Where can I buy MSP430I2020TPW and what is the price?
Use the Request a Quote form on this page to request current MSP430I2020TPW pricing, stock confirmation, lead time, and order quantity from XAIPART. The form is the appropriate route because component availability and commercial terms can change independently of the technical product page. Provide the required quantity, delivery destination, and target date so the request can be evaluated accurately.
How long is the lead time for MSP430I2020TPW?
Request the current MSP430I2020TPW lead time through the Request a Quote form on this page. Lead time depends on supplier inventory, order quantity, scheduled allocation, and the requested delivery date. For production planning, include firmware, PCB, and qualification schedules in addition to the component lead time rather than treating component delivery as the complete project schedule.

Mühendislik referans verileri: MSP430I2020TPW — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose MSP430I2020TPW for a two-channel metering design that benefits from 24-bit sigma-delta conversion, two 16-bit timers, 16 KB Flash, and 1 KB RAM in a 28-pin TSSOP package. Choose MSP430I2021TPW when one ADC channel is sufficient and reducing analog complexity matters more. Consider MSP430I2022TPW when its exact family resources match the design while retaining a two-channel configuration. Use MSP430I2031TPW or MSP430I2041TPW when three or four ADC channels are needed. All listed candidates are same-brand family options, so software support and the MSP430I2xx hardware ecosystem reduce migration risk. Confirm exact pin assignments and firmware dependencies before replacement; package similarity alone does not prove that added or removed ADC channels are harmless.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün MSP430I2021TPW MSP430I2022TPW MSP430I2031TPW MSP430I2041TPW
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 28-pin TSSOP (PW) 28-pin TSSOP (PW) 28-pin TSSOP (PW) 28-pin TSSOP (PW) 28-pin TSSOP (PW)
ADC Channel Count 2 channels 1 channel 2 channels 3 channels 4 channels
ADC Resolution 24-bit 24-bit 24-bit 24-bit 24-bit
Maximum Clock Frequency 16.384 MHz 16.384 MHz 16.384 MHz 16.384 MHz 16.384 MHz
Timer Count 2 timers, 16-bit each 2 timers, 16-bit each 2 timers, 16-bit each 2 timers, 16-bit each 2 timers, 16-bit each
Supply Voltage 2.5 V or 3.3 V 2.5 V or 3.3 V 2.5 V or 3.3 V 2.5 V or 3.3 V 2.5 V or 3.3 V
Operating Temperature -40 °C to 105 °C -40 °C to 105 °C -40 °C to 105 °C -40 °C to 105 °C -40 °C to 105 °C

Ana Farklılayıcılar

  • Two-channel 24-bit metering AFE (karşılaştırma:MSP430I2021TPW)
  • Lower channel count than the I203x family (karşılaştırma:MSP430I2031TPW)
  • Half the ADC channel count of the I204x family (karşılaştırma:MSP430I2041TPW)

Tasarım Notları

Route analog inputs as short, guarded traces away from switching nodes, high-current conductors, and digital communication lines. Keep the analog ground, digital ground, and exposed package ground connections consistent with the manufacturer layout guidance. Place input filtering and protection components close to the source and MCU pins so their parasitics are included in the simulated signal path. Verify every analog and supply pin against the PW package drawing before releasing PCB artwork.

Do not select a family member solely from its 28-pin TSSOP package. MSP430I2021, I2022, I2031, and I2041 options differ in ADC-channel count, which can change analog routing, calibration, and firmware behavior. Confirm the exact pinout, timer resources, memory configuration, supply requirements, and peripheral assignments in the family data sheet. Treat a software migration and board review as mandatory parts of any substitution.

Budget the complete power path rather than the MCU core alone. Include sensor excitation, analog bias, ADC circuitry, regulators, communications, and output drivers when estimating battery life. Place low-ESR decoupling capacitors close to the supply pins and follow the manufacturer recommendation for bulk capacitance. Check startup, settling, and supply ripple behavior across the intended 2.5 V or 3.3 V operating condition.

Sigma-delta resolution is not the same as end-to-end measurement accuracy. Establish the input range, source impedance, antialiasing filter, reference voltage, gain, offset, and calibration method before setting the expected resolution. Use the periodic timers to define repeatable acquisition windows and reject or compensate mains-related interference. Validate accuracy at the actual signal bandwidth and temperature range used by the finished product.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The industrial -40 °C to 105 °C temperature specification is documented, but explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not identified. Verify current compliance documentation for the exact ordering code before regulatory submission.

İlgili Aramalar

MSP430I2020TPW datasheet MSP430I2020TPW pinout MSP430I2020TPW specifications MSP430I2020TPW datasheet pdf MSP430I2020TPW equivalent MSP430I2020TPW replacement MSP430I2020TPW footprint MSP430I2020TPW vs MSP430I2041TPW MSP430I2020TPW energy metering MSP430I2020TPW price MSP430I2020TPW stock Texas Instruments MSP430I2020TPW

İlgili Bileşenler ve Terimler

Texas Instruments MSP430I2020TPW MSP430I2020 MSP430I2021TPW MSP430I2022TPW MSP430I2031TPW MSP430I2041TPW MSP430 CPU16 mixed-signal microcontroller microcontroller sigma-delta ADC 24-bit ADC energy metering AFE 16-bit RISC 16 KB Flash 1 KB RAM 16.384 MHz 16-bit timer TSSOP-28 TSSOP package family surface-mount package industrial temperature range smart energy meter industrial power monitoring Texas Instruments MSP430I2xx ecosystem
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle