Texas Instruments

OPA445AU - ±45V FET-Input Op Amp | Texas Instruments

MPN: OPA445AU ✓ Aktif
±45 V Vdss 10 pA Id 8-pin SOIC Package
MOQ: 1 |

OPA445AU Genel Bakış

The Texas Instruments OPA445AU is a single-amplifier, high-voltage FET-input operational amplifier specified for supply voltages up to ±45 V, a gain-bandwidth product of 2 MHz, and a slew rate of 15 V/µs, packaged in an 8-pin SOIC. It supports output currents up to 15 mA and combines low input bias current of 10 pA with wide output-voltage and common-mode ranges.

An operational amplifier is an analog signal-conditioning device that amplifies the voltage difference between its inverting and non-inverting inputs while providing high input impedance and low output impedance. The OPA445 belongs to the operational-amplifier hierarchy of analog ICs, where it sits above the general-purpose amplifier category and below precision, high-voltage, and instrumentation amplifiers. Its high-voltage capability makes it suitable for industrial and instrumentation circuits that operate beyond conventional low-voltage op-amp rails.

The OPA445AU features a wide power-supply range of up to ±45 V, a 15 V/µs slew rate, and input bias current of 10 pA. The 2 MHz gain-bandwidth product supports moderate-gain signal paths, while the 15 mA output-current capability provides useful drive for downstream stages. FET input architecture minimizes input bias current, which is advantageous when the source impedance is high and source leakage would otherwise distort the measured signal.

The monolithic amplifier architecture is intended for applications requiring high output-voltage or large common-mode-voltage swings. Its operating characteristics make it relevant to industrial sensor conditioning, high-voltage measurement front ends, test equipment, audio paths, and power-system instrumentation. Because the device supports bipolar supplies of up to ±45 V, its input and output stages must be designed to remain within the datasheet limits even when the system uses a narrower rail voltage.

Typical uses include buffering high-impedance transducers, amplifying bipolar sensor signals, driving analog measurement chains, and providing gain in laboratory equipment. The 10 pA input bias current reduces loading on sensitive sources, while the 15 V/µs slew rate allows the amplifier to follow relatively fast signal transitions. At low closed-loop gain, bandwidth limits and stability considerations become more important than slew-rate limits.

For PCB implementation, use the manufacturer pin-description table when assigning traces and power connections, keep input and feedback paths short, and decouple each supply rail close to the device. Account for the SOIC-8 thermal limitations under sustained high output voltage and current. A practical design review should verify common-mode range, output swing, supply polarity, and stability with the intended gain and load.

This page combines the OPA445AU specifications, verified drop-in candidates, comparison parameters, and practical design guidance to support component selection, PCB planning, and replacement decisions beyond the basic manufacturer ordering information.

Drop-in alternatifler için OPA445AU — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

OPA445BM

✅ Yerleştirme
📦 8-pin SOIC
Primary performance parameters are reported as identical, including 2 MHz gain-bandwidth product and 15 V/µs slew rate; verify temperature grade and ordering suffix

📋 Katalogda Olmayan Referans Alternatifi

OPA445AID

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 8-pin SOIC
Same OPA445 high-voltage amplifier family with 2 MHz bandwidth and 15 V/µs slew rate; exact temperature-grade and ordering differences require suffix-level verification

📋 Katalogda Olmayan Referans Alternatifi

OPA445AU Maksimum Değerlendirmeler & Elektriksel Özellikler

Amplifier Type Single operational amplifier
Input Bias Current 10 pA
Maximum Supply Voltage ±45 V
Maksimum Çıkış Akımı 15 mA
Gain-Bandwidth Product 2 MHz
Slew Rate 15 V/µs
Input Type FET input
Number of Circuits 1 circuit
Application Category General-purpose amplifier
Paket 8-pin SOIC
Package Width 3.90 mm

OPA445AU 3.90 mm Pin Yapısı Kılavuzu

OPA445AU (3.90 mm paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.

3.90 mm paket pin çizelgesi için OPA445AU

Ayrıntılı pin çıkış verisi mevcut değil: OPA445AU.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

OPA445AU için uygundur 6 uygulamas: Industrial Sensor Signal Conditioning, High-Voltage Measurement Buffer, Laboratory Test Equipment, Power-System Instrumentation, Audio and Signal Amplification, Precision Feedback and Filtering.

🏭

Industrial Sensor Signal Conditioning

The OPA445AU suits high-impedance industrial sensor front ends that operate on elevated supply rails. Its 10 pA input bias current minimizes the DC error introduced by resistive sensors with high source impedance, while operation up to ±45 V supports interface circuits located near high-voltage process equipment. The amplifier can provide differential gain around a low-noise reference and drive the input stage of an ADC or data-acquisition system. Designers should verify the required common-mode range and output swing for the selected supply voltage, add input filtering for sensor wiring, and use guarding to reduce PCB leakage. The 15 V/µs slew rate is useful when sensor transients are faster than the 2 MHz small-signal bandwidth alone suggests, although loop stability must be checked at the selected gain.

🔧

High-Voltage Measurement Buffer

OPA445AU can buffer high-voltage measurement signals without relying on a conventional low-voltage op amp. Its specified operation up to ±45 V and 10 pA input bias current are valuable when measuring divided high-voltage nodes, buffered probes, or low-current sensing elements. Placing the device as a voltage follower can reduce loading while preserving the measured level, or it can form a gain stage around a precision feedback network. The design must still confirm that the input common-mode voltage, output swing, and absolute maximum ratings include transients and component tolerances. Use protected board layouts, suitable input attenuation, and a low-leakage feedback network. The 15 mA output-current specification allows moderate loading, but downstream capacitance should be checked for stability.

🖥️

Laboratory Test Equipment

The OPA445AU is appropriate for laboratory and electronic test equipment that requires flexible gain, high input impedance, and operation from elevated bipolar rails. Its 2 MHz gain-bandwidth product is useful in moderate-bandwidth instrumentation paths, and the 10 pA input bias current reduces loading on probes and high-value test sources. The amplifier can implement non-inverting, inverting, differential, and active-filter stages when stable compensation and feedback values are selected from the manufacturer guidance. At higher closed-loop gains, bandwidth and noise rather than slew rate usually dominate the response. Keep sensitive input traces short, decouple the supply pins locally, and verify the output load because the device's 15 mA rating is not a guarantee of unrestricted capacitive drive.

⚡

Power-System Instrumentation

OPA445AU can amplify scaled voltage signals associated with power-system monitoring when the measurement interface operates above ordinary low-voltage analog rails. The ±45 V capability supports bipolar signal conditioning around zero, while the low 10 pA input bias current is beneficial when the front end includes high-value dividers or isolation-related components. The amplifier may drive an ADC input, comparator, or monitoring controller after appropriate scaling and filtering. Protection components must be selected for the actual fault voltage, and the amplifier's input and output limits should be checked under transients rather than only nominal conditions. The 15 V/µs slew rate helps reproduce faster transitions, but the 2 MHz bandwidth limits accurate response to high-frequency events. Maintain a defined analog ground and isolate the measurement path from switching-power nodes.

🎧

Audio and Signal Amplification

OPA445AU can provide gain and buffering in audio or general signal-amplification paths when a high-voltage rail and wide output swing are more important than low-noise precision. Its 15 V/µs slew rate is well suited to preserving large-signal edges, while the 2 MHz gain-bandwidth product limits small-signal bandwidth and places an upper limit on usable gain at high frequencies. FET inputs reduce bias-current-related distortion in high-impedance sources, although noise and distortion specifications must be checked against the audio requirements. The output-current limit of 15 mA supports modest loads but not low-ohm headphone or speaker stages without a driver. Keep feedback components compact, provide local supply bypass, and test the configured filter or gain stage across the required signal bandwidth.

📡

Precision Feedback and Filtering

OPA445AU can implement active filters, integrators, and precision feedback networks on high-voltage rails. Its low 10 pA input bias current reduces DC error in high-value feedback resistors, while operation up to ±45 V enables signal processing around elevated bipolar supply nodes. The 2 MHz gain-bandwidth product must be checked against the intended closed-loop bandwidth and phase margin; narrow-band filters require component tolerances and parasitics to be included in the response calculation. A 15 V/µs slew rate can improve large-signal behavior, but it does not remove the small-signal bandwidth or stability limits. Use the manufacturer feedback and compensation guidance, keep sensitive summing nodes compact, and ensure resistor ratings and dielectric types suit the operating voltage.

Önerilen Ürünler Özeti

OPA445AU Texas Instruments Kullanıldığı Yer: Industrial Sensor Signal Conditioning, High-Voltage Measurement Buffer, Laboratory Test Equipment, Power-System Instrumentation, Audio and Signal Amplification, Precision Feedback and Filtering OPA445AID Same-family SOIC amplifier option Kullanıldığı Yer: Industrial Sensor Signal Conditioning, Power-System Instrumentation, Precision Feedback and Filtering OPA445BM Pin-compatible high-voltage amplifier option Kullanıldığı Yer: High-Voltage Measurement Buffer, Laboratory Test Equipment, Audio and Signal Amplification
What are the key specifications of OPA445AU that engineers should know?
The OPA445AU is a single high-voltage FET-input operational amplifier with a maximum supply voltage of ±45 V, 2 MHz gain-bandwidth product, 15 V/µs slew rate, 10 pA input bias current, and 15 mA output-current capability in an 8-pin SOIC package. According to the Texas Instruments OPA445 datasheet, these characteristics place it between conventional low-voltage op amps and higher-performance precision instrumentation amplifiers. It is most useful when the signal requires a high-voltage operating rail, wide output or common-mode swing, or very low input bias current. The 10 pA bias current is particularly relevant to high-impedance transducers, while the 15 V/µs slew rate supports faster large-signal transitions than the 2 MHz small-signal bandwidth alone would suggest.
What is the operating voltage of OPA445AU?
The OPA445AU supports power supplies of up to ±45 V. According to the Texas Instruments OPA445 datasheet, it is a monolithic operational amplifier designed for high output-voltage and large common-mode-voltage swings. Supply voltage, input common-mode voltage, and output swing are separate constraints, so a ±45 V capability does not mean every input or output can reach that rail. Confirm the complete operating region in the manufacturer electrical-characteristics table for the selected supply configuration. The device can also operate from single-supply systems within its specified limits, but single-supply operation may restrict signal range around ground and requires suitable input and output biasing.
Where can I download the OPA445AU datasheet PDF?
The official OPA445AU datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/opa445.pdf. The document provides the ordering information, electrical characteristics, pin descriptions, typical performance curves, and application guidance for the OPA445 family. Use the manufacturer document for final design decisions because package suffix, supply configuration, and operating-temperature information must be matched to the exact ordered device. The OPA445AU is the 8-pin SOIC ordering option, and the datasheet is also the authoritative source for assigning pin numbers and checking the exposed conditions associated with the SOIC footprint.
Where can I find the OPA445AU pinout?
The OPA445AU pinout is identified in the pin-configuration section of the Texas Instruments OPA445 datasheet. The device is an 8-pin SOIC, and the manufacturer documentation should be used to map supply, output, input, and compensation-related terminals to the physical footprint. Assign PCB tracks from that table rather than relying on a generic SOIC-8 diagram because the numbering and functions belong to this specific amplifier. For a new design, verify the exact OPA445AU ordering suffix, confirm the package drawing, and cross-check the pin map against the selected board footprint and any required isolation or guarding around sensitive input nodes.
Is OPA445AU suitable for high-impedance sensor signal conditioning?
Yes, the OPA445AU is suitable for many high-impedance sensor signal-conditioning applications because its FET input stage provides a specified input bias current of 10 pA. According to the Texas Instruments OPA445 datasheet, the low bias current reduces the DC error introduced when the source resistance is high. Its ±45 V maximum supply capability also permits operation on high-voltage industrial rails where a conventional low-voltage amplifier would be unsuitable. The designer must still verify input common-mode range, input bias current versus temperature, noise performance, and the bias current contributed by PCB leakage. Guarding, clean connectors, and suitable input filtering can be as important as the amplifier's nominal specification.
How does OPA445AU compare with OPA445BM?
OPA445AU and OPA445BM have closely aligned primary operating characteristics and are presented as functionally equivalent options, but the replacement should be checked against the exact manufacturer ordering tables. The OPA445AU is an 8-pin SOIC device specified for supplies up to ±45 V, 2 MHz gain-bandwidth product, 15 V/µs slew rate, 10 pA input bias current, and 15 mA output current. The cross-reference result identifies no measurable difference in the primary technical parameters. Before substitution, verify package pinout, temperature grade, electrical limits, lead finish, and availability for the intended production configuration rather than relying only on the headline performance comparison.
What is the difference between OPA445AU and OPA445AID?
OPA445AU and OPA445AID are closely related single-amplifier options in the OPA445 family, with OPA445AU identified as the 8-pin SOIC ordering variant. Their shared high-voltage architecture is characterized by operation up to ±45 V, a 2 MHz gain-bandwidth product, 15 V/µs slew rate, and low 10 pA input bias current. The meaningful selection points are the exact ordering suffix, temperature grade, and lifecycle or supply status associated with each part. Before treating OPA445AID as a drop-in replacement, compare its SOIC-8 pin description and electrical characteristics with OPA445AU in the Texas Instruments datasheet. This distinction is particularly important for industrial systems with specified ambient-temperature limits.
When should I choose OPA445AU over another high-voltage operational amplifier?
Choose the OPA445AU when the design needs a single-amplifier high-voltage solution with an 8-pin SOIC footprint, operation up to ±45 V, a 10 pA input bias current, and a 15 V/µs slew rate. Its 2 MHz bandwidth is suited to moderate-gain signal paths rather than demanding wideband applications. Consider another amplifier when the circuit requires greater closed-loop bandwidth, lower offset voltage, lower noise, rail-to-rail input or output behavior, or a package and pinout already standardized on a different device. A sound selection process compares the complete electrical tables and the required source, load, gain, and output-voltage conditions rather than choosing from supply voltage alone.
Is OPA445AU suitable for industrial instrumentation and test equipment?
The OPA445AU is suitable for industrial instrumentation and test-equipment signal paths that need a high-voltage amplifier with low input bias current. According to the Texas Instruments OPA445 datasheet, the device can operate from supplies up to ±45 V and deliver up to 15 mA, while its FET input draws only 10 pA of bias current. Those attributes suit high-impedance probes, industrial sensor interfaces, and laboratory buffers operating above common low-voltage op-amp rails. In practice, confirm the exact operating-temperature grade, common-mode range, output swing, noise, and stability. Protective clamping, input filtering, and appropriately rated board insulation may also be required around high-energy measurement nodes.
What can replace OPA445AU?
OPA445BM is the closest documented drop-in candidate for OPA445AU because the cross-reference information reports identical primary performance profiles and both use the 8-pin SOIC configuration. OPA445AID is another same-family SOIC candidate, subject to verification of the exact suffix, temperature grade, and ordering conditions. A valid replacement must preserve the 8-pin pinout and remain compatible with the required ±45 V rail, 2 MHz bandwidth, 15 V/µs slew rate, 10 pA input bias current, and 15 mA output-current requirements. Confirm all electrical limits against the manufacturer datasheet before production use.
Is OPA445AU the same as OPA445BM?
OPA445AU and OPA445BM are functionally very close but should not be treated as identical without a suffix-level review. A published comparison reports no measurable difference across their primary technical parameters, and both are associated with the 8-pin SOIC OPA445 family. The OPA445AU has a maximum supply rating of ±45 V, 2 MHz gain-bandwidth product, 15 V/µs slew rate, 10 pA input bias current, and 15 mA output current. Compare the exact operating-temperature grade, pin description, electrical limits, and ordering suffixes before using one as a drop-in replacement in a regulated industrial or automotive-adjacent design.
Where can I buy OPA445AU online?
Use the Request a Quote form on this page to request OPA445AU pricing, stock confirmation, and lead time for the exact 8-pin SOIC ordering suffix. The form allows buyers to specify required quantity, packaging, and delivery information without relying on static catalog prices. The OPA445AU is also listed by authorized component distributors, but live inventory and lead time can vary by region and order quantity. For production planning, request the current manufacturer lifecycle status and confirm whether the quoted part is the tube-packed OPA445AU or a different tape-and-reel order code.
What is the price of OPA445AU?
The current OPA445AU price is generated through the Request a Quote form on this page. Enter the required quantity and specify whether the order requires tube packaging or an approved tape-and-reel ordering code. For procurement records, request the quote validity date and include any schedule requirements. The OPA445AU is an 8-pin SOIC high-voltage operational amplifier, and its commercial value should be evaluated together with stock, packaging, and lead time rather than from a static unit-price figure that can change with market conditions.
What is the lead time for OPA445AU?
The current OPA445AU lead time should be confirmed through the Request a Quote form on this page. Include the annual and forecast quantities, target date, and required packaging format so the response reflects the actual production plan. A distributor may show immediate shipment for an available unit while requiring substantially more time for a scheduled production order. Texas Instruments product and ordering pages also provide lifecycle and part-status information, but those pages should not be treated as a binding supply commitment. For safety stock, request a written lead-time and allocation statement tied to the exact OPA445AU ordering suffix.
Is OPA445AU in stock?
Stock for OPA445AU changes with order quantity and packaging, so use the Request a Quote form on this page for a current availability confirmation. Specify the exact 8-pin SOIC variant and required quantity when requesting status. If the requested quantity is not immediately available, ask for the nearest realistic delivery date, partial-shipment options, and allocation for production scheduling. Do not treat a listing-page inventory indication as a guaranteed allocation, particularly when a scheduled build depends on multiple production lots. The manufacturer product page can also be checked for lifecycle status and ordering options.
How should OPA445AU be decoupled and laid out on a PCB?
Place the required supply bypass capacitors directly beside the OPA445AU supply and ground pins, keeping their ground returns short and close to the device. According to the Texas Instruments OPA445 datasheet, stable operation depends on the intended feedback network and compensation configuration. Route the two input and feedback paths without long loops or proximity to high-current switching nodes, and use a solid ground reference beneath the analog section. Verify the exact capacitor values and layout recommendations in the datasheet rather than substituting values from unrelated op amps. Also check whether probe protection, input clamps, or creepage requirements apply because the device can operate on ±45 V rails.

Mühendislik referans verileri: OPA445AU — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose OPA445AU for an 8-pin SOIC design that needs a single high-voltage, FET-input amplifier with operation up to ±45 V, 2 MHz gain-bandwidth product, 15 V/µs slew rate, and 10 pA input bias current. It is especially appropriate for high-impedance industrial sensors, bipolar measurement buffers, and test equipment whose signal levels exceed conventional low-voltage op-amp rails. OPA445BM is a strong candidate when a published comparison shows identical primary performance, but confirm its exact suffix-level operating limits before substitution. OPA445AID is another same-family SOIC option, with the final choice depending on temperature grade and ordering status. Use a different amplifier when the design requires more bandwidth, lower offset, lower noise, rail-to-rail operation, or a different pinout. For every candidate, verify common-mode range, output swing, stability, thermal performance, and supply decoupling.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün OPA445BM OPA445AID
Brand Texas Instruments Texas Instruments Texas Instruments
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC
Amplifier Type Single high-voltage FET-input operational amplifier Single high-voltage FET-input operational amplifier Single high-voltage FET-input operational amplifier
Maximum Supply Voltage ±45 V ±45 V ±45 V
Gain-Bandwidth Product 2 MHz 2 MHz 2 MHz
Slew Rate 15 V/µs 15 V/µs 15 V/µs
Input Bias Current 10 pA 10 pA 10 pA
Maximum Output Current 15 mA 15 mA 15 mA
Input Architecture FET input FET input FET input

Ana Farklılayıcılar

  • Combines a high-voltage rail with very low input bias current (karşılaştırma:OPA445AID)
  • Documented primary-parameter equivalence (karşılaştırma:OPA445BM)
  • No low-voltage input penalty for elevated industrial rails (karşılaştırma:Conventional low-voltage operational amplifiers)

Tasarım Notları

Place bypass capacitors beside the OPA445AU supply and ground pins, and keep the return path short enough to avoid adding inductance between the capacitor and the device. Route the input and feedback components close to their associated pins, especially in high-gain or precision-filter configurations. A solid analog ground plane helps establish predictable return currents, but high-current switching paths should remain separated from sensitive input nodes.

Do not treat the ±45 V maximum supply rating as permission to exceed the input common-mode range or output swing. Check the complete electrical characteristics for the selected supply voltage, and include transients, tolerances, and protection-diode drops in the worst-case analysis. Likewise, the 15 mA output-current rating does not guarantee stable operation into every capacitive load. Confirm the feedback network and load condition against the manufacturer guidance.

The 2 MHz gain-bandwidth product requires careful attention to closed-loop gain and phase margin. A 15 V/µs slew rate supports large-signal transitions but does not extend small-signal bandwidth. Use stable resistor and capacitor values, minimize parasitic capacitance around high-impedance summing nodes, and test the completed layout with realistic source and load impedances. Guarding may be necessary where board leakage could compete with the specified 10 pA input bias current.

Estimated: with a 12 V total supply span, a 4.5 V output, and 15 mA output current, the ideal output-stage dissipation is approximately (12 V - 4.5 V) × 0.015 A = 112.5 mW. Actual device heating also includes quiescent and internal losses. This estimate uses a 12 V total span, 4.5 V output, and 15 mA load; use the manufacturer power-dissipation limits and the actual operating conditions for the final SOIC-8 thermal assessment.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer product documentation.

Veri doğrulanma tarihi: 2026-11-19 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

OPA445AU datasheet OPA445AU pinout OPA445AU datasheet pdf OPA445AU equivalent OPA445AU replacement OPA445AU vs OPA445BM OPA445AU price OPA445AU stock Texas Instruments OPA445AU OPA445AU SOIC-8 amplifier OPA445AU high voltage op amp OPA445AU sensor signal conditioning

İlgili Bileşenler ve Terimler

Texas Instruments OPA445AU OPA445BM OPA445AID operational amplifier single operational amplifier high-voltage amplifier FET-input amplifier analog IC instrumentation amplifier precision amplifier SOIC-8 SOIC package surface-mount package gain-bandwidth product slew rate input bias current common-mode voltage output voltage swing power-supply rejection industrial instrumentation sensor signal conditioning test and measurement power-system monitoring active filter
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle