Texas Instruments

OPA691ID - 280MHz Wideband Op Amp | Texas Instruments

MPN: OPA691ID ✓ Aktif
±4.0 V Vdss 280 MHz Id 8-pin SOIC (D package) Package
MOQ: 1 |

OPA691ID Genel Bakış

Texas Instruments OPA691ID is a wideband, unity-gain-stable current-feedback operational amplifier with a disable function, a 280 MHz current-feedback bandwidth, 2 GHz gain-bandwidth product, 190 mA output current capability, and an 8-pin SOIC package. Its flexible supply range supports operation up to +12 V single-supply or ±6 V dual-supply, making it suitable for high-speed signal-chain designs.

A current-feedback operational amplifier is a voltage-feedback amplifier architecture optimized for high-speed applications. Unlike a conventional voltage-feedback amplifier, the OPA691 uses feedback-node impedance to establish gain, which supports wide bandwidth and high slew rate while operating from a low 5.1 mA supply current. The resulting hierarchy places it among high-speed operational amplifiers, analog signal-chain ICs, amplifiers, and semiconductor devices.

The principal performance characteristics include a 190 mA output current rating, ±4.0 V output voltage swing, 2,100 V/µs slew rate, and 2 GHz gain-bandwidth product. Unity-gain stability allows the amplifier to be used directly at a gain of one. The disable input adds a practical control function: leaving it open or holding it high permits normal operation, while pulling it low reduces supply current to less than 150 µA and places the output in a high-impedance state.

The OPA691ID is specified for an ambient operating-temperature range of −40°C to +85°C and uses the TI D-package 8-pin SOIC configuration. Its low supply current combines with wide bandwidth and high output-current capability, making it useful where signal fidelity, large-swing drive, and controlled power-down behavior are all important. Designers should also account for the datasheet limits on output swing, supply voltage, disable-pin logic, input common-mode range, and external feedback components.

Typical uses include video and broadcast signal conditioning, communications infrastructure, test and measurement front ends, active filters, and high-speed instrumentation. The part is especially relevant where a wideband amplifier must operate from a compact 8-pin SOIC footprint and provide low-current shutdown behavior. In systems using polarity reversal or supply-level shifting, the ±6 V dual-supply capability can simplify signal-chain implementation.

Use the manufacturer datasheet pin-description table when assigning PCB tracks, especially because the disable function and supply rails determine safe routing and logic-level compatibility. Place input, output, supply-decoupling, and feedback components close to the device to minimize parasitic capacitance. Validate stability, bandwidth, output swing, and disable timing in the final board layout rather than relying only on ideal-device calculations.

This page combines the manufacturer product information, ordering details, functional characteristics, package data, and cross-reference findings into an engineering-focused product record. It also identifies the limits of drop-in substitution: no distinct non-packaging drop-in alternatives were confirmed for the OPA691ID, so variant names should not be treated as equivalent devices without electrical and pin-level verification.

Drop-in alternatifler için OPA691ID — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

OPA691IDR

✅ Yerleştirme
📦 8-pin SOIC (D)
Identical 8-pin SOIC OPA691 electrical configuration; ordering designation differs by 0%, with no measured electrical parameter difference stated.

📋 Katalogda Olmayan Referans Alternatifi

OPA691IDG4

✅ Yerleştirme
📦 8-pin SOIC (D)
Identical 8-pin SOIC OPA691 electrical configuration; green or legacy ordering designation differs by 0%, with no measured electrical parameter difference stated.

📋 Katalogda Olmayan Referans Alternatifi

OPA691IDRG4

✅ Yerleştirme
📦 8-pin SOIC (D)
Identical 8-pin SOIC OPA691 electrical configuration; ordering suffix differs by 0%, with no measured electrical parameter difference stated.

📋 Katalogda Olmayan Referans Alternatifi

OPA691ID Maksimum Değerlendirmeler & Elektriksel Özellikler

Amplifier Type Current-feedback operational amplifier
Number of Circuits 1 circuit
Gain-Bandwidth Product 2 GHz
Current Feedback Bandwidth 280 MHz
Slew Rate 2,100 V/µs
Output Current 190 mA
Output Voltage Swing ±4.0 V
Besleme Akımı 5.1 mA
Maximum Single-Supply Voltage +12 V
Maximum Dual-Supply Voltage ±6 V
Unity-Gain Stable Yes
Disable-State Supply Current Less than 150 µA
Disable Output State High impedance
İşletim Sıcaklığı −40°C to +85°C
Paket 8-pin SOIC (D package)
Montaj Türü Surface mount

OPA691ID 8-pin soic (d package) Pin Yapısı Kılavuzu

OPA691ID (8-pin soic (d package) paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.

8-pin soic (d package) paket pin çizelgesi için OPA691ID

Ayrıntılı pin çıkış verisi mevcut değil: OPA691ID.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

OPA691ID için uygundur 6 uygulamas: Wideband Video Signal Conditioning, Communications RF and Baseband Front Ends, High-Speed Instrumentation Amplification, Active Wideband Filters, Data Acquisition and Test Systems, Low-Power Signal Multiplexing.

📺

Wideband Video Signal Conditioning

The OPA691ID fits wideband video conditioning because its 280 MHz current-feedback bandwidth, 2 GHz gain-bandwidth product, and 2,100 V/µs slew rate preserve large-amplitude signals across a broad frequency range. Place it as a low-gain or fixed-gain stage between a source and an ADC, cable driver, or monitor input, with the feedback network selected according to the manufacturer datasheet. Its ±4.0 V output swing and 190 mA output capability help support downstream stages, while the disable input can provide controlled shutdown. Validate gain accuracy, output settling, and capacitive-load behavior on the final PCB.

🌐

Communications RF and Baseband Front Ends

The OPA691ID is applicable to communications front ends requiring high bandwidth and fast output transitions, including low-level IF and baseband conditioning stages. Its 190 mA output-current capability provides margin for moderate loading, while the 5.1 mA operating supply current limits power demand in distributed equipment. The amplifier accepts single- or dual-supply operation up to +12 V or ±6 V, allowing the signal path to match different rail plans. Feedback resistors, input biasing, and disable logic require careful review because current-feedback gain and common-mode limits differ from conventional voltage-feedback designs.

🔧

High-Speed Instrumentation Amplification

The OPA691ID supports fast instrumentation stages where sensor or test-signal bandwidth would be degraded by a slower general-purpose amplifier. Its 280 MHz current-feedback bandwidth and 2,100 V/µs slew rate allow rapid signal transitions, and the unity-gain-stable architecture provides flexibility around a one-volt-per-volt stage. Use the device with carefully placed feedback components and controlled source impedance to maintain predictable behavior. The 190 mA output current can help drive moderate scope or analyzer inputs, but cable loading, probe capacitance, and oscilloscope input topology must be included in system validation.

📡

Active Wideband Filters

OPA691ID is well suited to wideband active filtering because its unity-gain stability, 2,100 V/µs slew rate, and 280 MHz current-feedback bandwidth allow small-signal operation beyond the bandwidth of many general-purpose amplifiers. The 190 mA output-current rating helps drive the reactive input and output networks encountered in active filters. Component tolerance, amplifier input impedance, and parasitic capacitance will set practical filter response and peaking, so calculations should be repeated with realistic parts and the assembled board. The disable pin can also isolate the stage during power-down or measurement sequences.

🖥️

Data Acquisition and Test Systems

The OPA691ID can serve as a high-speed buffer or gain stage in data-acquisition equipment where acquisition-system input bandwidth is a limiting factor. Its 2 GHz gain-bandwidth product and 2,100 V/µs slew rate reduce the risk of slew-limited acquisition, while 190 mA output current provides useful drive capability. Place the amplifier close to the acquisition front end to minimize trace capacitance and reflections, and verify that the selected feedback network remains stable with the converter or instrument input. The shutdown function supports controlled operating states in multichannel systems.

⚡

Low-Power Signal Multiplexing

The OPA691ID is useful in multiplexed signal paths because pulling the disable pin low reduces supply current to less than 150 µA and places the output in a high-impedance state. In normal operation, the amplifier delivers 280 MHz current-feedback bandwidth and 2,100 V/µs slew rate, allowing disabled channels to be re-enabled without changing the basic footprint of the active channel. The multiplexing architecture must account for input and output loading, isolation behavior, switching transients, and logic levels. Leaving the disable pin open provides normal operation according to the manufacturer product information.

Önerilen Ürünler Özeti

OPA691IDR Same OPA691 electrical configuration in an alternate orderable packaging format Kullanıldığı Yer: Wideband Video Signal Conditioning, High-Speed Instrumentation Amplification, Data Acquisition and Test Systems OPA691IDG4 Same OPA691 family device identified in the cross-reference results Kullanıldığı Yer: Communications RF and Baseband Front Ends, Active Wideband Filters, Low-Power Signal Multiplexing
What is the OPA691ID?
The OPA691ID is a single-circuit, wideband current-feedback operational amplifier with a disable function, packaged in an 8-pin SOIC. According to the Texas Instruments OPA691 product page and manufacturer datasheet, it combines a 280 MHz current-feedback bandwidth, 2 GHz gain-bandwidth product, 2,100 V/µs slew rate, and 190 mA output-current capability. The low 5.1 mA operating supply current makes it useful in broadband instrumentation, communications, video, and test systems where both speed and power efficiency matter.
What are the key specifications of OPA691ID that engineers should know?
The OPA691ID combines a 280 MHz current-feedback bandwidth, 2 GHz gain-bandwidth product, 2,100 V/µs slew rate, and 190 mA output-current capability in an 8-pin SOIC. According to the Texas Instruments manufacturer datasheet, the amplifier is unity-gain stable and operates from a low 5.1 mA supply current. Its disable input can reduce supply current to less than 150 µA and force the output into a high-impedance state, providing useful control for low-power or multiplexed signal-chain designs.
What supply voltages does OPA691ID support?
The OPA691ID supports a flexible supply range up to +12 V single-supply or ±6 V dual-supply. According to the Texas Instruments OPA691 manufacturer datasheet, its architecture is designed for low-voltage operation while retaining wide bandwidth. Actual usable signal range remains constrained by the input common-mode voltage, output swing, and supply limits. Designers should use the datasheet electrical characteristics for the exact configuration and load rather than assuming the full supply range is available at the output.
How does the OPA691ID disable function work?
Leaving the OPA691ID disable pin open or holding it high permits normal amplifier operation. According to the Texas Instruments OPA691 product page, pulling the pin low reduces supply current to less than 150 µA while placing the output in a high-impedance state. This behavior supports controlled shutdown and multiplexed-system designs. The disable logic should be checked against the surrounding supply sequence and interface voltage levels before it is used as a general-purpose digital control.
Where can I download the OPA691ID datasheet PDF?
The OPA691ID datasheet and ordering information are available from the official Texas Instruments OPA691 product page at https://www.ti.com/product/OPA691. The manufacturer part-details page identifies OPA691ID as an 8-pin SOIC device rated from −40°C to 85°C. Use the manufacturer copy for the complete pin description, recommended operating conditions, electrical characteristics, disable behavior, and application guidance, and use the product page for current lifecycle and ordering information.
Where can I find the OPA691ID pinout?
The OPA691ID uses the TI D-package 8-pin SOIC configuration, and its pin assignments are shown in the pinout section of the Texas Instruments OPA691 manufacturer datasheet. The eight terminals include the positive and negative supply connections, two inputs, output, and disable-related connections according to the package drawing. Because signal-path and disable-pin assignments determine PCB routing, use the datasheet pin-description table rather than inferring connections from a generic SOIC footprint.
Can OPA691ID operate at unity gain?
Yes, the OPA691ID is unity-gain stable. According to the Texas Instruments manufacturer datasheet, this allows closed-loop operation at a gain of one while retaining its wideband current-feedback performance. Current-feedback amplifiers determine gain through the external feedback network, so resistor values and parasitic board capacitance remain important. Validate the completed layout across the required bandwidth because amplifier stability, feedback impedance, and capacitive loading interact.
What is the output current capability of OPA691ID?
The OPA691ID supports a high output current of 190 mA, as stated in the Texas Instruments OPA691 manufacturer datasheet. This capability is useful when driving moderate capacitive, cable, or downstream analog loads without immediately relying on an external buffer. The usable result still depends on supply voltage, output swing, continuous versus peak current conditions, package dissipation, load impedance, and temperature. Review the datasheet output-current and thermal limits for the selected operating condition.
What can replace the OPA691ID?
No distinct non-packaging drop-in replacement for the OPA691ID was confirmed by the available cross-reference results. The identified OPA691IDR and OPA691IDG4 names represent orderable variants of the same device family rather than independently characterized substitutes with different engineering specifications. According to the Texas Instruments ordering information, the OPA691ID is the 8-pin SOIC orderable designation. Before substituting another amplifier, verify package, pinout, disable logic, bandwidth, slew rate, output current, supply range, and stability.
Is OPA691ID the same as OPA691IDR?
The OPA691ID and OPA691IDR provide the same core OPA691 amplifier function, but their orderable packaging or delivery formats differ. Cross-reference results identify both as wideband current-feedback operational amplifiers with disable in an 8-SOIC configuration and a −40°C to 85°C temperature range. The manufacturer ordering information should be used for the exact shipment method and quantity configuration. Because this is a packaging-code variation rather than a distinct functional alternative, verify the purchased suffix before placing the order.
Is OPA691ID suitable for high-speed video and communications?
The OPA691ID is suitable for many high-speed video and communications signal-chain tasks because its 280 MHz current-feedback bandwidth, 2,100 V/µs slew rate, 190 mA output current, and ±4.0 V output swing support wideband amplification. According to the Texas Instruments manufacturer datasheet, it is unity-gain stable and accepts single- or dual-supply operation up to +12 V or ±6 V. The final design must still satisfy input common-mode, output-swing, gain-resistor, loading, and bandwidth requirements.
When should I choose OPA691ID over another current-feedback amplifier?
Choose the OPA691ID when an 8-pin SOIC design needs more than 280 MHz current-feedback bandwidth, 2 GHz gain-bandwidth product, 2,100 V/µs slew rate, and 190 mA output-current capability without requiring a higher supply current than 5.1 mA during operation. Its disable function adds a controlled low-power mode below 150 µA. If a candidate part has a different disable polarity, missing shutdown control, different feedback-network requirements, or narrower output-current capability, account for that difference before treating it as an equivalent.
How should OPA691ID power and decoupling be designed?
Route the OPA691ID supply and ground connections with low loop inductance and place the manufacturer-recommended bypass capacitors close to the relevant pins. According to the Texas Instruments manufacturer datasheet, the device supports operation up to +12 V single-supply or ±6 V dual-supply, with normal supply current near 5.1 mA. Keep high-speed feedback traces short, isolate sensitive inputs from clocked or switching nodes, and test output settling and stability on the final PCB because package and routing parasitics can alter practical bandwidth.
Is OPA691ID compliant with RoHS and REACH?
The RoHS and REACH status of OPA691ID is not established by the product information supplied for this record. According to the official Texas Instruments product page, ordering, quality, and compliance information is presented with the OPA691 family, but the accessible package excerpt does not provide an explicit declaration. Check the current manufacturer product page or declaration of compliance for the exact orderable MPN before using the device in a regulated production design.
Where can I buy OPA691ID and what is its price?
Use the Request a Quote form on this page to obtain current OPA691ID commercial terms, stock status, minimum order quantity, and lead time. The available product listings confirm the exact Texas Instruments OPA691ID designation and its 8-SOIC configuration, but they do not provide a complete quantity-break price table that can be reproduced reliably. Quote confirmation should identify the exact suffix, delivery packaging, quantity, and current availability before an order is placed.

Mühendislik referans verileri: OPA691ID — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the OPA691ID when an 8-pin SOIC signal path needs a 280 MHz current-feedback bandwidth, 2 GHz gain-bandwidth product, 2,100 V/µs slew rate, and 190 mA output-current capability at approximately 5.1 mA operating supply current. Its disable function is valuable when the channel must enter a low-power state below 150 µA or present a high-impedance output. OPA691IDR and OPA691IDG4 are orderable family variants rather than distinct functional substitutes, so choose the suffix according to the required shipment format and ordering configuration. For a candidate from another manufacturer, require pin-level compatibility, compatible disable polarity, suitable common-mode range, equivalent feedback-network behavior, and adequate output swing and drive. A similar bandwidth rating alone does not establish a drop-in replacement.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün
Package 8-pin SOIC (D package)
Brand Texas Instruments
Amplifier Architecture Current feedback
Current Feedback Bandwidth 280 MHz
Gain-Bandwidth Product 2 GHz
Slew Rate 2,100 V/µs
Output Current 190 mA
Operating Supply Current 5.1 mA
Maximum Single-Supply Voltage +12 V
Maximum Dual-Supply Voltage ±6 V
Disable-State Supply Current Less than 150 µA
Operating Temperature −40°C to +85°C

Ana Farklılayıcılar

  • Combines wideband current-feedback performance with a low-power shutdown function (karşılaştırma:OPA691IDR)
  • Provides high output-current capability for a compact 8-pin SOIC amplifier (karşılaştırma:OPA691IDG4)
  • Supports flexible single- and dual-supply operation (karşılaştırma:OPA691IDR)

Tasarım Notları

Keep the OPA691ID input, output, feedback, and supply connections short, and place the manufacturer-recommended bypass capacitors directly across the relevant supply pins. High-speed op amps can form unintended feedback paths through ground and supply impedance, so use a continuous ground reference and avoid routing the feedback network beside noisy or high-current traces. Validate settling time and stability with the final enclosure, cables, and load because parasitic inductance and capacitance can materially affect a 2 GHz gain-bandwidth-product device.

Use the datasheet feedback-resistor recommendations because OPA691ID is a current-feedback amplifier whose gain depends on feedback impedance. Place feedback components close to the device, keep the summing node compact, and minimize capacitance on the inverting input. Check the output against the expected capacitive load and destination input capacitance; excessive loading can produce peaking, ringing, or reduced bandwidth even when the amplifier is unity-gain stable.

The normal operating supply current is 5.1 mA, while the disable state reduces it to less than 150 µA. When assigning the disable signal, account for the manufacturer's stated behavior: open or high enables normal operation, while low commands the high-impedance output state. Confirm logic thresholds, supply sequencing, and any pull resistor arrangement so the pin remains in a defined state during reset. Verify the analog output for transient behavior when the channel is enabled or disabled.

Do not interpret the ±6 V dual-supply or +12 V single-supply capability as a guarantee of full rail-to-rail operation. The output swing is specified as ±4.0 V, and usable input range also depends on the supply arrangement. Check headroom, output-current limits, and thermal conditions against the actual load. The 190 mA current rating is a key capability but does not remove the need to verify continuous operation, package dissipation, and temperature rise.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The accessible manufacturer and distributor excerpts do not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status for OPA691ID. AEC-Q100 qualification is not indicated and is not applicable to this catalog entry.

Veri doğrulanma tarihi: 2026-11-09 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

OPA691ID datasheet OPA691ID pinout OPA691ID datasheet pdf OPA691ID specifications OPA691ID equivalent OPA691ID replacement OPA691ID cross reference OPA691ID SOIC-8 pinout OPA691ID application circuit OPA691ID current feedback amplifier Texas Instruments OPA691ID OPA691ID price OPA691ID stock

İlgili Bileşenler ve Terimler

Texas Instruments OPA691ID OPA691IDR OPA691IDG4 OPA691 wideband current-feedback operational amplifier current-feedback amplifier CFA operational amplifier amplifier IC analog signal chain semiconductor SOIC-8 8-pin SOIC surface-mount package 280 MHz current-feedback bandwidth 2 GHz gain-bandwidth product 2,100 V/µs slew rate 190 mA output current 5.1 mA supply current disable function high-impedance output video signal conditioning communications front end data acquisition RoHS REACH
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle