OPA695ID - 1.7GHz Ultra-Wideband Op Amp | Texas Instruments
MPN: OPA695ID ✓ AktifOPA695ID Genel Bakış
A current-feedback operational amplifier is a voltage-input amplifier whose internal feedback network controls bandwidth through the feedback impedance rather than a fixed closed-loop gain-bandwidth relationship. This architecture belongs to the broader operational-amplifier hierarchy and is particularly useful when a signal must be amplified with low distortion across a wide bandwidth. In the signal-chain hierarchy, the OPA695ID belongs to the high-speed amplifier class used between sensors, converters, active filters, and measurement front ends.
The principal performance characteristics are its 1.7 GHz bandwidth, 5000 V/us slew rate, and low input-voltage noise. The wide slew rate allows large voltage transitions to occur rapidly, reducing the probability that high-amplitude or high-frequency signals will be limited by slew-rate distortion. The 5 V to 12 V supply range also places the amplifier in systems with common low-voltage instrumentation rails. A disable function supports controlled operating states when a system must reduce activity or isolate an analog channel.
OPA695ID uses a current-feedback topology rather than a conventional voltage-feedback architecture. That distinction is important at higher closed-loop gains because the relationship between gain and bandwidth differs from that of a standard op amp. Engineers should therefore use the manufacturer gain and feedback guidance when setting operating conditions. Its wide bandwidth and slew rate make the amplifier appropriate for intermediate gain stages where signal fidelity must be maintained before conversion, filtering, or further amplification.
Typical uses include high-speed instrumentation, analog measurement systems, video-signal conditioning, active filtering, and interfaces to current-output DACs. The current-feedback format can also serve ADC driver and buffer functions when the required bandwidth is beyond the practical range of general-purpose voltage-feedback amplifiers. Its 8-pin SOIC package supports conventional surface-mount assembly while providing separate supply, input, output, feedback, and disable connections.
The principal design trade-off is that current-feedback amplifiers require careful resistor selection and board layout. Feedback-impedance values, trace resistance, supply decoupling, and ground return paths can materially affect bandwidth and distortion. Begin with the manufacturer reference values, preserve short feedback paths, and avoid adding capacitance across the inverting input unless the application specifically requires that behavior. Decoupling capacitors should be placed directly beside the supply pins to minimize high-frequency supply impedance.
This product record combines the manufacturer’s device description, package identification, electrical limits, ordering information, and practical implementation guidance. It also provides direct-access links to the OPA695 documentation, an engineering-oriented pinout notice, drop-in replacement findings, and design notes focused on feedback stability, supply layout, signal integrity, and temperature-related selection.
Drop-in alternatifler için OPA695ID — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
OPA2695ID
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
OPA3695ID
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
OPA657ID
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
OPA656ID
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
OPA695ID Maksimum Değerlendirmeler & Elektriksel Özellikler
| Amplifier Type | Current-feedback operational amplifier |
| Number of Circuits | 1 amplifier |
| Gain Bandwidth Product | 1.7 GHz |
| Slew Rate | 5000 V/us |
| Supply Voltage Range | 5 V to 12 V |
| Disable Function | Yes |
| İşletim Sıcaklığı Aralığı | -40 C to +85 C |
| Package Type | 8-SOIC |
| Package Width | 3.90 mm |
| Montaj Türü | Surface mount |
OPA695ID 3.90 mm Pin Yapısı Kılavuzu
OPA695ID (3.90 mm paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: OPA695ID.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
OPA695ID için uygundur 6 uygulamas: High-Speed Instrumentation, Current-DAC Interface, Active Wideband Filtering, High-Speed ADC Driver, Video Signal Conditioning, Precision Signal-Chain Gain Stage.
High-Speed Instrumentation
The OPA695ID fits intermediate gain stages in wideband measurement systems because its 1.7 GHz bandwidth and 5000 V/us slew rate preserve signal amplitude and transition fidelity. It can amplify a sensor or converter output before further filtering, digitization, or display processing. The current-feedback topology must be implemented with the manufacturer-recommended feedback impedance for the selected gain, while the 5 V to 12 V supply range simplifies integration with common instrumentation rails. Board validation should include gain flatness, distortion, and stability checks.
Current-DAC Interface
The OPA695ID is suitable for buffering and scaling the output of a current-output DAC when the system needs substantially more bandwidth than a conventional general-purpose op amp provides. Its 5000 V/us slew rate helps reproduce fast output transitions, while the 1.7 GHz bandwidth provides margin for high-speed signal paths. The circuit still requires careful feedback-resistor selection, short routing, suitable return paths, and confirmation that the DAC output remains within the amplifier’s input and output operating limits.
Active Wideband Filtering
OPA695ID can serve in a high-frequency active-filter stage where signal bandwidth and large-signal performance are more important than the simplicity of a general-purpose amplifier. The 1.7 GHz bandwidth and 5000 V/us slew rate provide the necessary speed for wideband filtering and phase-sensitive networks. Component tolerances and amplifier behavior must be considered together because the current-feedback stage can affect transfer-function accuracy. Use manufacturer reference values for feedback resistance and verify the assembled filter for gain error, ringing, and passband distortion.
High-Speed ADC Driver
The OPA695ID is appropriate for an ADC driver stage when acquisition rates require an amplifier faster than typical precision op amps. Its wide bandwidth handles higher-frequency content around the converter, while the high slew rate reduces the risk of slew-limited transitions. The actual implementation depends on the ADC’s input architecture, sampling rate, and input capacitance, all of which determine the required feedback network and output drive. Verify settling behavior and dynamic output range against the converter’s acquisition requirements.
Video Signal Conditioning
OPA695ID can condition low-amplitude video or control signals when the path includes high-frequency content requiring more bandwidth and slew capability than a general-purpose amplifier. Its 1.7 GHz bandwidth and 5000 V/us slew rate are useful for preserving edges and reducing timing-related distortion. The amplifier’s disable function can support controlled test or channel states. PCB implementation should minimize feedback-loop area, keep supply bypassing close to the pins, and account for the capacitance of downstream wiring and protection components.
Precision Signal-Chain Gain Stage
The OPA695ID is useful as a high-gain intermediate stage in precision analog chains where small signals must be amplified without low-bandwidth slew limitations. Texas Instruments identifies high-gain operation and high-speed instrumentation as strengths of the OPA695 family. Because current-feedback behavior differs from voltage-feedback amplifiers, engineers should not assume conventional closed-loop bandwidth rules. Establish stable operation with the recommended feedback resistor, evaluate noise and distortion at the signal frequency, and include the disable control in the system power-management sequence.
Mühendislik referans verileri: OPA695ID — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün |
|---|---|
| Package | 8-SOIC |
| Brand | Texas Instruments |
| Amplifier Type | Current-feedback operational amplifier |
| Number of Circuits | 1 amplifier |
| Gain Bandwidth Product | 1.7 GHz |
| Slew Rate | 5000 V/us |
| Supply Voltage Range | 5 V to 12 V |
| Disable Function | Yes |
| Operating Temperature Range | -40 C to +85 C |
Ana Farklılayıcılar
- High slew rate supports large-signal wideband performance (karşılaştırma:General-purpose operational amplifiers)
- Dedicated disable function supports controlled operating states (karşılaştırma:OPA2695)
- Current-feedback topology is optimized for high-gain operation (karşılaştırma:Conventional voltage-feedback amplifiers)
Tasarım Notları
Do not apply the closed-loop bandwidth rules of a conventional voltage-feedback amplifier to the OPA695ID. Its current-feedback topology makes the feedback resistor a key circuit parameter, and the appropriate value can change with gain. Start from the manufacturer’s reference values, preserve a compact feedback path, and check the final assembly for oscillation or peaking. A footprint-compatible amplifier with different pin assignments or disable behavior cannot be substituted solely because its bandwidth rating is similar.
Place the supply-decoupling capacitors immediately beside the OPA695ID power pins, with the ground return terminating close to the device ground connection. Keep input, output, and feedback traces short, and avoid routing high-current return paths beneath the sensitive analog nodes. Breadboard-style point-to-point wiring is generally unsuitable for a 1.7 GHz amplifier; use a controlled-impedance PCB and inspect the assembled board with an oscilloscope for ringing, overshoot, and supply-induced modulation.
Treat the OPA695ID as a high-speed analog element even when its signal amplitude is small. Maintain controlled return paths, minimize parasitic capacitance at the input and feedback nodes, and account for probe and test-equipment capacitance when evaluating high-frequency response. If a downstream protection network or long trace adds capacitance, validate the closed-loop response rather than relying on nominal bandwidth alone. This is particularly important for high-gain stages where small parasitic reactances can affect stability.
Estimate dissipation from the actual supply voltage, quiescent current, output swing, and load current before assigning the operating-temperature budget. The amplifier’s -40 C to +85 C rating describes environmental operation, not the permitted case or junction temperature at every dissipation level. Use the manufacturer thermal information for the selected 8-SOIC package and provide appropriate copper area and airflow where necessary. Confirm the exact dissipation and thermal limits before using the device in a high-output-duty-cycle signal path.
Uyumluluk Bilgisi
The manufacturer product documentation should be consulted for the exact OPA695ID ordering configuration. The -40 C to +85 C operating-temperature range does not by itself constitute AEC-Q100 qualification.