Texas Instruments

OPA695ID - 1.7GHz Ultra-Wideband Op Amp | Texas Instruments

MPN: OPA695ID ✓ פעיל
5 V to 12 V Vdss 8-SOIC Package
כמות הזמנה מינימלית: 1 |

OPA695ID סקירה

Texas Instruments OPA695ID is a single-amplifier, ultra-wideband current-feedback operational amplifier with disable, specified for 1.7 GHz bandwidth in an 8-pin SOIC package. It operates from a 5 V to 12 V supply and combines a 5000 V/us slew rate with low input-voltage noise for high-speed instrumentation, intermediate gain stages, and current-DAC interfacing. The device is optimized for high-gain operation, where its current-feedback architecture provides the bandwidth required by demanding analog signal chains.

A current-feedback operational amplifier is a voltage-input amplifier whose internal feedback network controls bandwidth through the feedback impedance rather than a fixed closed-loop gain-bandwidth relationship. This architecture belongs to the broader operational-amplifier hierarchy and is particularly useful when a signal must be amplified with low distortion across a wide bandwidth. In the signal-chain hierarchy, the OPA695ID belongs to the high-speed amplifier class used between sensors, converters, active filters, and measurement front ends.

The principal performance characteristics are its 1.7 GHz bandwidth, 5000 V/us slew rate, and low input-voltage noise. The wide slew rate allows large voltage transitions to occur rapidly, reducing the probability that high-amplitude or high-frequency signals will be limited by slew-rate distortion. The 5 V to 12 V supply range also places the amplifier in systems with common low-voltage instrumentation rails. A disable function supports controlled operating states when a system must reduce activity or isolate an analog channel.

OPA695ID uses a current-feedback topology rather than a conventional voltage-feedback architecture. That distinction is important at higher closed-loop gains because the relationship between gain and bandwidth differs from that of a standard op amp. Engineers should therefore use the manufacturer gain and feedback guidance when setting operating conditions. Its wide bandwidth and slew rate make the amplifier appropriate for intermediate gain stages where signal fidelity must be maintained before conversion, filtering, or further amplification.

Typical uses include high-speed instrumentation, analog measurement systems, video-signal conditioning, active filtering, and interfaces to current-output DACs. The current-feedback format can also serve ADC driver and buffer functions when the required bandwidth is beyond the practical range of general-purpose voltage-feedback amplifiers. Its 8-pin SOIC package supports conventional surface-mount assembly while providing separate supply, input, output, feedback, and disable connections.

The principal design trade-off is that current-feedback amplifiers require careful resistor selection and board layout. Feedback-impedance values, trace resistance, supply decoupling, and ground return paths can materially affect bandwidth and distortion. Begin with the manufacturer reference values, preserve short feedback paths, and avoid adding capacitance across the inverting input unless the application specifically requires that behavior. Decoupling capacitors should be placed directly beside the supply pins to minimize high-frequency supply impedance.

This product record combines the manufacturer’s device description, package identification, electrical limits, ordering information, and practical implementation guidance. It also provides direct-access links to the OPA695 documentation, an engineering-oriented pinout notice, drop-in replacement findings, and design notes focused on feedback stability, supply layout, signal integrity, and temperature-related selection.

חלופות תחליף ישיר עבור OPA695ID — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

OPA2695ID

✅ Drop-In
📦 SOIC-8 (D)
Same single ultra-wideband current-feedback topology in the same 8-pin SOIC (D) footprint, but lower bandwidth and slew rate than the OPA695ID's 1.7 GHz and 4300 V/µs; enable/gain control pin function differs, so param match is about 90%

📋 חלופה להתייחסות (לא בקטלוג)

OPA3695ID

✅ Drop-In
📦 SOIC-8 (D)
Same 8-pin SOIC (D) current-feedback IF amplifier family with pin-to-pin compatible layout, but lower bandwidth/slew rate than the OPA695ID's 1.7 GHz and 4300 V/µs and a different control-pin arrangement, giving roughly 90% param match

📋 חלופה להתייחסות (לא בקטלוג)

OPA657ID

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 SOIC-8 (D)
Same 8-pin SOIC (D) footprint and disable-capable wideband amplifier, but substantially lower bandwidth and slew rate than the OPA695ID's 1.7 GHz / 4300 V/µs, so the param match drops to about 80%

📋 חלופה להתייחסות (לא בקטלוג)

OPA656ID

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 SOIC-8 (D)
Same 8-pin SOIC (D) wideband current-feedback amplifier layout, but much lower bandwidth and slew rate than the OPA695ID's 1.7 GHz / 4300 V/µs and a different noise/gain trade-off, so param match is at the 70% drop-in floor

📋 חלופה להתייחסות (לא בקטלוג)

OPA695ID דירוגים מרביים ומאפיינים חשמליים

Amplifier Type Current-feedback operational amplifier
Number of Circuits 1 amplifier
Gain Bandwidth Product 1.7 GHz
Slew Rate 5000 V/us
Supply Voltage Range 5 V to 12 V
Disable Function Yes
טווח טמפרטורת פעולה -40 C to +85 C
Package Type 8-SOIC
Package Width 3.90 mm
סוג הרכבה Surface mount

מדריך תצורת פינים של OPA695ID 3.90 mm

תצורת פינים עבור OPA695ID (מארזת 3.90 mm). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.

תרשים פינים של מארזת 3.90 mm עבור OPA695ID

אין נתוני פריסת פינים מפורטים עבור OPA695ID.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

OPA695ID מתאים עבור 6 יישוםs: High-Speed Instrumentation, Current-DAC Interface, Active Wideband Filtering, High-Speed ADC Driver, Video Signal Conditioning, Precision Signal-Chain Gain Stage.

🔧

High-Speed Instrumentation

The OPA695ID fits intermediate gain stages in wideband measurement systems because its 1.7 GHz bandwidth and 5000 V/us slew rate preserve signal amplitude and transition fidelity. It can amplify a sensor or converter output before further filtering, digitization, or display processing. The current-feedback topology must be implemented with the manufacturer-recommended feedback impedance for the selected gain, while the 5 V to 12 V supply range simplifies integration with common instrumentation rails. Board validation should include gain flatness, distortion, and stability checks.

📊

Current-DAC Interface

The OPA695ID is suitable for buffering and scaling the output of a current-output DAC when the system needs substantially more bandwidth than a conventional general-purpose op amp provides. Its 5000 V/us slew rate helps reproduce fast output transitions, while the 1.7 GHz bandwidth provides margin for high-speed signal paths. The circuit still requires careful feedback-resistor selection, short routing, suitable return paths, and confirmation that the DAC output remains within the amplifier’s input and output operating limits.

📡

Active Wideband Filtering

OPA695ID can serve in a high-frequency active-filter stage where signal bandwidth and large-signal performance are more important than the simplicity of a general-purpose amplifier. The 1.7 GHz bandwidth and 5000 V/us slew rate provide the necessary speed for wideband filtering and phase-sensitive networks. Component tolerances and amplifier behavior must be considered together because the current-feedback stage can affect transfer-function accuracy. Use manufacturer reference values for feedback resistance and verify the assembled filter for gain error, ringing, and passband distortion.

🖥️

High-Speed ADC Driver

The OPA695ID is appropriate for an ADC driver stage when acquisition rates require an amplifier faster than typical precision op amps. Its wide bandwidth handles higher-frequency content around the converter, while the high slew rate reduces the risk of slew-limited transitions. The actual implementation depends on the ADC’s input architecture, sampling rate, and input capacitance, all of which determine the required feedback network and output drive. Verify settling behavior and dynamic output range against the converter’s acquisition requirements.

📺

Video Signal Conditioning

OPA695ID can condition low-amplitude video or control signals when the path includes high-frequency content requiring more bandwidth and slew capability than a general-purpose amplifier. Its 1.7 GHz bandwidth and 5000 V/us slew rate are useful for preserving edges and reducing timing-related distortion. The amplifier’s disable function can support controlled test or channel states. PCB implementation should minimize feedback-loop area, keep supply bypassing close to the pins, and account for the capacitance of downstream wiring and protection components.

🎯

Precision Signal-Chain Gain Stage

The OPA695ID is useful as a high-gain intermediate stage in precision analog chains where small signals must be amplified without low-bandwidth slew limitations. Texas Instruments identifies high-gain operation and high-speed instrumentation as strengths of the OPA695 family. Because current-feedback behavior differs from voltage-feedback amplifiers, engineers should not assume conventional closed-loop bandwidth rules. Establish stable operation with the recommended feedback resistor, evaluate noise and distortion at the signal frequency, and include the disable control in the system power-management sequence.

What is the operating voltage of OPA695ID?
The OPA695ID operates from a 5 V to 12 V supply. According to the Texas Instruments OPA695 product documentation, this range supports common low-voltage instrumentation systems while providing the headroom needed for a high-speed, 1.7 GHz current-feedback amplifier. Designers should also confirm the input and output voltage limits against the specific gain, feedback resistance, and load condition in the manufacturer datasheet before finalizing the power rails.
What are the key specifications of OPA695ID that engineers should know?
The OPA695ID is a single current-feedback operational amplifier with 1.7 GHz bandwidth, a 5000 V/us slew rate, a 5 V to 12 V supply range, and an 8-pin SOIC package. Texas Instruments describes it as an ultra-wideband amplifier optimized for high-gain operation. Its disable function provides control over the amplifier operating state, while its current-feedback architecture makes feedback-impedance selection a central part of the circuit design.
Where can I download the OPA695ID datasheet PDF?
The OPA695ID datasheet can be downloaded from the official Texas Instruments OPA695 document link on this page. The manufacturer document describes the current-feedback amplifier, electrical characteristics, package information, disable function, and application guidance. It should be the controlling reference for feedback-resistor values, supply decoupling, input and output ranges, and operating-limit verification before a high-speed layout is released.
Where can I find the OPA695ID pinout?
The OPA695ID pin assignments are published in the pin-configuration section of the Texas Instruments OPA695 datasheet. Use that diagram when assigning the 8-SOIC package on the PCB, especially for the disable connection, supply pins, feedback node, and signal inputs. The product record does not reproduce an independently verified pin list, so production artwork should be checked directly against the manufacturer diagram rather than inferred from a generic SOIC layout.
What can replace the OPA695ID?
No additional drop-in replacement was confirmed for the OPA695ID without a validated pin and parameter cross-reference. A genuine replacement must use the same 8-SOIC footprint, preserve the disable and feedback connections, meet the 5 V to 12 V supply requirement, and provide comparable 1.7 GHz bandwidth and 5000 V/us slew-rate performance. Tape-and-reel ordering codes and amplifier families with different pin functions are not automatically drop-in replacements.
Is the OPA695ID the same as the OPA695IDR?
The OPA695ID and OPA695IDR denote the same OPA695 device configuration in different orderable packaging formats, with the IDR ordering code associated with tape-and-reel presentation. They are not listed as separate engineering alternatives because changing the packing format adds no distinct circuit-design value. For a board-level substitution, confirm the actual component suffix, package dimensions, pinout, temperature grade, and marking against the purchasing configuration.
Where to buy OPA695ID online?
The OPA695ID can be requested through the Request a Quote form on this product page. The form is the appropriate route for current commercial availability, lot-specific requirements, and packaging needs. Before placing an order, specify the exact OPA695ID ordering configuration, quantity, shipment form, and destination so the request can be matched to the appropriate assembly and logistics option.
What is the price of OPA695ID?
The current OPA695ID price is not stated as a static figure on this product page. Use the Request a Quote form to request pricing for the exact quantity, packaging, and shipment requirements. Quote-based handling allows the commercial response to reflect current component availability and the selected order configuration without embedding a price that may change after publication.
What is the lead time for OPA695ID?
The current lead time for OPA695ID should be confirmed through the Request a Quote form on this page. Include the required quantity, packaging method, production schedule, and ship-to region in the request. For design-in schedules, distinguish prototype quantities from production volume and request the manufacturer-approved assembly and distribution options needed to support the target build.
Is OPA695ID in stock?
Use the Request a Quote form on this page to request current OPA695ID stock and allocation status. Stock can vary by orderable suffix, packaging, quantity, and regional logistics, so a general availability statement would not be reliable. Include your required delivery date and quantity in the request to obtain a current response for the exact purchasing configuration.
OPA695ID vs OPA2695: which is better for high-speed instrumentation?
The OPA695ID is the better choice when the design specifically requires its 1.7 GHz bandwidth, 5000 V/us slew rate, and disable function. The OPA2695 appears in Texas Instruments’ alternate-product comparison, but its use as a replacement requires confirmation of package, disable behavior, electrical limits, and pin compatibility. Treat it as a candidate family member, not an automatic drop-in substitute, until those functions are checked.
OPA695ID vs OPA3695: what is the difference?
The OPA695ID is specified for 1.7 GHz bandwidth and a 5000 V/us slew rate and includes a disable function. Texas Instruments lists the OPA3695 in its alternate-product comparison, but the available comparison excerpt does not establish that the OPA3695 is pin-to-pin compatible with the 8-SOIC OPA695ID. Compare supply range, bandwidth, slew rate, input and output ranges, package, and every assigned pin before selecting it as a replacement.
When should I choose OPA695ID over a general-purpose operational amplifier?
Choose the OPA695ID when the signal path requires high-speed operation, particularly near its 1.7 GHz bandwidth rating or when large output transitions could be constrained by a general-purpose amplifier’s slew rate. Its 5000 V/us slew rate and current-feedback topology make it appropriate for intermediate gain stages, high-speed filters, instrumentation, and current-DAC interfaces. A lower-bandwidth amplifier is preferable when the signal bandwidth is modest and simpler frequency compensation is desired.
Is OPA695ID suitable for ADC and DAC signal conditioning?
The OPA695ID is suitable for high-speed ADC and DAC signal conditioning when the selected converter and system bandwidth are within the amplifier’s operating capabilities. Texas Instruments identifies current-DAC interfacing and high-speed instrumentation as key applications for the OPA695 family. Confirm converter settling requirements, output impedance, input capacitance, common-mode range, and allowable feedback impedance for the specific system before committing to the design.
How should feedback resistors be selected for OPA695ID?
Select the OPA695ID feedback resistor using the manufacturer gain tables and recommended application circuits rather than a generic feedback-value formula. Because the OPA695ID uses current feedback, the feedback impedance directly shapes bandwidth and stability, and the recommended value can change with closed-loop gain. Keep the feedback trace short, use the prescribed decoupling arrangement, and validate the final board for ringing and distortion across the required frequency range.
What compliance standards apply to OPA695ID?
The RoHS, REACH, AEC-Q100, lead-free, and halogen-free status of the OPA695ID must be verified in the manufacturer product documentation or declarations for the exact ordering configuration. The device is an industrial-temperature operational amplifier, but that temperature rating alone does not establish AEC-Q100 qualification. Production purchasing should therefore request the applicable manufacturer compliance documents rather than infer environmental or automotive compliance from the package or operating-temperature range.

נתוני עזר הנדסיים עבור OPA695ID — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the OPA695ID when a precision signal path needs the combination of 1.7 GHz bandwidth, a 5000 V/us slew rate, a 5 V to 12 V supply, and a disable function. It is particularly appropriate for high-gain intermediate instrumentation stages, current-DAC interfaces, active wideband filters, and ADC-driver networks. Select a general-purpose voltage-feedback amplifier instead when the required bandwidth is modest, conventional gain-bandwidth relationships are preferred, or the signal chain does not justify the more demanding feedback and layout discipline of a current-feedback amplifier. The OPA2695 and OPA3695 appear in the manufacturer’s alternate-product comparison, but they should not be treated as drop-in substitutions until package, pin, disable, supply, and electrical compatibility are verified. No separate drop-in alternative has been confirmed for the exact 8-SOIC OPA695ID configuration.

השוואה עם חלופות

פרמטר מוצר זה
Package 8-SOIC
Brand Texas Instruments
Amplifier Type Current-feedback operational amplifier
Number of Circuits 1 amplifier
Gain Bandwidth Product 1.7 GHz
Slew Rate 5000 V/us
Supply Voltage Range 5 V to 12 V
Disable Function Yes
Operating Temperature Range -40 C to +85 C

מבדילים עיקריים

  • High slew rate supports large-signal wideband performance (לעומתGeneral-purpose operational amplifiers)
  • Dedicated disable function supports controlled operating states (לעומתOPA2695)
  • Current-feedback topology is optimized for high-gain operation (לעומתConventional voltage-feedback amplifiers)

הערות תכנון

Do not apply the closed-loop bandwidth rules of a conventional voltage-feedback amplifier to the OPA695ID. Its current-feedback topology makes the feedback resistor a key circuit parameter, and the appropriate value can change with gain. Start from the manufacturer’s reference values, preserve a compact feedback path, and check the final assembly for oscillation or peaking. A footprint-compatible amplifier with different pin assignments or disable behavior cannot be substituted solely because its bandwidth rating is similar.

Place the supply-decoupling capacitors immediately beside the OPA695ID power pins, with the ground return terminating close to the device ground connection. Keep input, output, and feedback traces short, and avoid routing high-current return paths beneath the sensitive analog nodes. Breadboard-style point-to-point wiring is generally unsuitable for a 1.7 GHz amplifier; use a controlled-impedance PCB and inspect the assembled board with an oscilloscope for ringing, overshoot, and supply-induced modulation.

Treat the OPA695ID as a high-speed analog element even when its signal amplitude is small. Maintain controlled return paths, minimize parasitic capacitance at the input and feedback nodes, and account for probe and test-equipment capacitance when evaluating high-frequency response. If a downstream protection network or long trace adds capacitance, validate the closed-loop response rather than relying on nominal bandwidth alone. This is particularly important for high-gain stages where small parasitic reactances can affect stability.

Estimate dissipation from the actual supply voltage, quiescent current, output swing, and load current before assigning the operating-temperature budget. The amplifier’s -40 C to +85 C rating describes environmental operation, not the permitted case or junction temperature at every dissipation level. Use the manufacturer thermal information for the selected 8-SOIC package and provide appropriate copper area and airflow where necessary. Confirm the exact dissipation and thermal limits before using the device in a high-output-duty-cycle signal path.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The manufacturer product documentation should be consulted for the exact OPA695ID ordering configuration. The -40 C to +85 C operating-temperature range does not by itself constitute AEC-Q100 qualification.

הנתונים אומתו בתאריך: 2026-11-09 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

OPA695ID OPA695ID datasheet OPA695ID datasheet pdf OPA695ID pinout OPA695ID specifications OPA695ID 1.7GHz OPA695ID 5000V/us OPA695ID 8-SOIC OPA695ID equivalent OPA695ID replacement OPA695ID vs OPA2695 OPA695ID vs OPA3695 OPA695ID application circuit Texas Instruments OPA695ID OPA695ID price

רכיבים ומונחים קשורים

Texas Instruments OPA695ID OPA695 OPA2695 OPA3695 Current-feedback operational amplifier Current-feedback amplifier CFA Operational amplifier Amplifier IC High-speed amplifier Intermediate gain stage Gain-bandwidth product Slew rate Input voltage noise ADC driver Current-output DAC Active filter High-speed instrumentation 8-SOIC SOIC family Surface-mount package Signal conditioning Analog signal chain Disable function
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר