Texas Instruments

OPA699ID - 1 GHz Voltage-Limiting Op Amp | Texas Instruments

MPN: OPA699ID ✓ Aktif
±10 mV Vdss 120 mA Id 8-pin SOIC (D), 3.90 mm width Package
MOQ: 1 |

OPA699ID Genel Bakış

Texas Instruments OPA699ID is a wideband, high-gain voltage-limiting operational amplifier with a 1 GHz gain-bandwidth product, 260 MHz -3 dB bandwidth, and 1400 V/µs slew rate. The single-channel device uses bipolar output limiting and is stable at gains of +4 V/V. It is packaged in an 8-pin SOIC (D) package for operation from -40°C to +85°C. Its combination of wide bandwidth, fast overdrive recovery, and accurate limiting makes the OPA699 useful in high-speed analog signal chains and protected ADC interfaces.

An operational amplifier is a voltage-feedback amplifier that uses negative feedback to amplify the difference between its differential inputs. The OPA699 belongs to the high-speed voltage-feedback amplifier family, which sits within the broader linear amplifier and analog IC hierarchy. Unlike a general-purpose precision amplifier, this device combines a wideband signal path with built-in bipolar output limiting, providing a deliberate boundary for output swing without relying entirely on external clamp networks.

Principal performance features include a 1 GHz gain-bandwidth product, a 260 MHz -3 dB bandwidth, and a minimum stable noise gain of +4. The amplifier can deliver output current up to 120 mA, while its output may swing to within approximately 1 V of each supply rail. The limiter has an accuracy of ±10 mV and recovers from overdrive in 1 ns. These characteristics are particularly useful when a fast signal must reach an analog-to-digital converter without allowing large transient or sustained overdrive to damage the input stage.

The OPA699ID operates from single-supply voltages of 5 V to 12 V or split supplies equivalent to ±2.5 V to ±6 V. Its wideband architecture prioritizes fast signal propagation and large-signal slew performance. Because the amplifier is stable only at gains of +4 or higher, closed-loop feedback must be arranged with sufficient attenuation; operation near unity gain can produce instability and ringing. Input bias current is approximately 3 µA, input offset voltage is approximately 1.5 mV, and typical supply current is 15.5 mA per channel.

Typical applications include high-speed ADC input conditioning, video and test-instrumentation signal chains, communications equipment, and active filtering where wide bandwidth is needed. The limiter can protect a downstream ADC input when an upstream transition produces excessive amplitude, while the 1 ns recovery characteristic helps the amplifier return to linear operation quickly after an overload event. Short trace lengths and careful grounding remain essential because the 260 MHz bandwidth can expose board-level parasitics and impedance discontinuities.

When laying out the circuit, place input, feedback, and supply-bypass connections close to the device and use a low-inductance ground return. Keep feedback-loop geometry compact to minimize parasitic inductance and maintain stable gain. Confirm the output-current demand, supply headroom, and ADC input range before relying on the limiter as the final protection mechanism.

This page combines the OPA699ID electrical characteristics, manufacturer documentation, package details, drop-in alternatives, and practical layout guidance into a focused engineering reference. It also distinguishes exact sourcing parameters from design-specific recommendations so engineers can evaluate the amplifier in ADC interfaces and other bandwidth-sensitive analog systems.

Drop-in alternatifler için OPA699ID — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller OPA699ID (aynı form faktörü ve ayağa oturma) — farklı olan -3 dB Bandwidth, Gain-Bandwidth Product, Slew Rate.

Texas Instruments
-3 dB Bandwidth: 450 MHz
Gain-Bandwidth Product: 250 MHz
Slew Rate: 1100 V/µs
İle Karşılaştır OPA699ID →

OPA699IDG4

✅ Yerleştirme
📦 SOIC-8 (D)
Green manufacturing finish; core ratings remain 1 GHz GBW, 260 MHz -3 dB bandwidth, 1400 V/µs slew rate, and 120 mA output current, a 0% difference in those listed parameters

📋 Katalogda Olmayan Referans Alternatifi

OPA699IDRG4

✅ Yerleştirme
📦 SOIC-8 (D)
Green manufacturing finish supplied in tape-and-reel format; core ratings remain 1 GHz GBW, 260 MHz -3 dB bandwidth, 1400 V/µs slew rate, and 120 mA output current, a 0% difference in those listed parameters

📋 Katalogda Olmayan Referans Alternatifi

OPA699UID

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 SOIC-8 (D)
Unqualified ordering suffix within the same OPA699 family; documented core performance remains 1 GHz GBW, 260 MHz -3 dB bandwidth, 1400 V/µs slew rate, and 120 mA output current, a 0% difference in those listed parameters

📋 Katalogda Olmayan Referans Alternatifi

OPA699UIDG4

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 SOIC-8 (D)
Unqualified ordering suffix with green manufacturing finish; documented core performance remains 1 GHz GBW, 260 MHz -3 dB bandwidth, 1400 V/µs slew rate, and 120 mA output current, a 0% difference in those listed parameters

📋 Katalogda Olmayan Referans Alternatifi

OPA699ID Maksimum Değerlendirmeler & Elektriksel Özellikler

Number of Channels 1 channel
Amplifier Type Voltage-feedback operational amplifier
Gain-Bandwidth Product 1000 MHz
-3 dB Bandwidth 260 MHz
Slew Rate 1400 V/µs
Minimum Stable Gain +4 V/V
Output Current 120 mA
Output Swing Limit Approximately 1 V from each supply rail
Limiting Voltage Accuracy ±10 mV
Overdrive Recovery Time 1 ns
Total Supply Voltage Range 5 V to 12 V
Split-Supply Operating Range ±2.5 V to ±6 V
Input Bias Current 3 µA
Input Offset Voltage 1.5 mV
Supply Current per Channel 15.5 mA
İşletim Sıcaklığı Aralığı -40°C to +85°C
Paket 8-pin SOIC (D), 3.90 mm width
Montaj Türü Surface mount

OPA699ID 8-pin soic (d), 3.90 mm width Pin Yapısı Kılavuzu

OPA699ID (8-pin soic (d), 3.90 mm width paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.

8-pin soic (d), 3.90 mm width paket pin çizelgesi için OPA699ID

Ayrıntılı pin çıkış verisi mevcut değil: OPA699ID.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

OPA699ID için uygundur 6 uygulamas: High-Speed ADC Input Conditioning, Video and Communications Signal Chains, Test and Measurement Instrumentation, Active Filtering and Frequency Response, Pulse and Digital-to-Analog Edge Conditioning, Industrial Control and Sensor Signal Paths.

📊

High-Speed ADC Input Conditioning

The OPA699ID fits between a fast analog source and a high-speed ADC because its 260 MHz -3 dB bandwidth preserves signal amplitude across a wide frequency range and its 1400 V/µs slew rate supports large full-scale transitions. The integrated bipolar limiter constrains output swing to approximately 1 V from each rail and provides ±10 mV limiting accuracy, helping protect the ADC input from an excessive transient. Configure the feedback network for noise gain of +4 or higher, then verify settling time against the ADC acquisition requirement. Because the limiter recovers in 1 ns, the amplifier can return rapidly to linear operation after a short overload.

🌐

Video and Communications Signal Chains

OPA699ID is appropriate for wideband communications and video circuitry requiring rapid edge delivery without sacrificing overload control. Its 1 GHz gain-bandwidth product and 260 MHz -3 dB bandwidth support wideband amplification, while the 1400 V/µs slew rate reduces distortion on square-wave and video-rate transitions. The bipolar output limiter helps prevent an unexpected upstream signal from driving the output deeply into saturation. Keep the closed-loop noise gain at +4 or higher and place feedback components close to the amplifier, because board parasitics become increasingly significant as signal bandwidth approaches the device's upper operating range.

🖥️

Test and Measurement Instrumentation

The OPA699ID can serve as a high-bandwidth buffer or gain stage in measurement equipment where fast recovery after an input overload is valuable. Its 1 ns recovery behavior helps minimize the interval during which the output remains distorted after clipping, and the ±10 mV limiter accuracy gives the circuit a defined output boundary. For instrumentation, evaluate the approximately 1.5 mV input offset and 3 µA bias current against the complete measurement error budget. Stable operation at gain +4 or higher also makes the device suitable for attenuating input networks feeding a high-speed measurement stage.

📡

Active Filtering and Frequency Response

OPA699ID can implement active filters and frequency-shaping stages in systems where the 260 MHz -3 dB bandwidth provides useful operating margin. Its 1400 V/µs slew rate reduces slew-induced distortion in filter passbands, while the 1 GHz gain-bandwidth product supports higher-order active-filter designs. The amplifier must remain at or above a +4 noise gain, which means the passive feedback network must deliberately establish that gain rather than relying on unity-gain buffering. Use short, shielded feedback routes and verify component parasitic effects because the wideband amplifier can amplify board-level feedback as well as the intended signal.

⚡

Pulse and Digital-to-Analog Edge Conditioning

OPA699ID is useful in pulse-shaping and data-converter output-conditioning circuits because its high slew rate preserves rapid transitions and its limiter limits amplitude during unexpected excursions. A 260 MHz -3 dB bandwidth covers many edge-sensitive analog stages, while the approximately ±10 mV limiter accuracy defines the peak output level more tightly than a passive clamp alone. The 1 ns overload recovery is especially useful when a pulse train temporarily exceeds the intended range. In implementation, use the manufacturer's recommended compensation and feedback arrangement, confirm the +4 minimum noise gain, and keep input and feedback traces short to prevent edge degradation.

🏭

Industrial Control and Sensor Signal Paths

OPA699ID can amplify and limit sensor signals in industrial systems where transient protection is needed close to the measurement front end. Its wide bandwidth supports fast sensor dynamics, and the integrated output limiter helps contain abnormal excursions before they reach a downstream converter or controller input. The approximately 1.5 mV offset and 3 µA bias current must be included in sensor-chain error calculations, particularly when the amplified signal is small. Use a noise gain of +4 or higher, provide local supply bypassing, and maintain a low-impedance return path so switching equipment and long sensor wiring do not degrade the measurement.

What is the operating voltage range of the OPA699ID?
The OPA699ID operates from 5 V to 12 V total supply voltage, corresponding to split-supply operation from ±2.5 V to ±6 V. According to the Texas Instruments OPA699 datasheet, bipolar output limiting and accurate output swing are maintained across this supply range. Designers should preserve adequate headroom for the output stage, especially when the output approaches the internal limiting region or drives a low-impedance load.
What are the key specifications of OPA699ID that engineers should know?
The OPA699ID is a single-channel, voltage-feedback amplifier with a 1 GHz gain-bandwidth product, 260 MHz -3 dB bandwidth, 1400 V/µs slew rate, and 1400 V/µs slew rate. According to the Texas Instruments OPA699 datasheet, it also provides bipolar output limiting accurate to ±10 mV, output current up to 120 mA, and operation across a 5 V to 12 V supply range. Its minimum stable gain is +4 V/V.
Where can I download the OPA699ID datasheet PDF?
The official OPA699ID datasheet PDF is available from the Texas Instruments product page at https://www.ti.com/lit/ds/symlink/opa699.pdf. The manufacturer identifies the OPA699ID as the 8-pin SOIC ordering option of the OPA699 family. Use the pin-description table, electrical-characteristics tables, and typical-application circuits in that document when assigning PCB functions and validating operating limits.
Where can I find the OPA699ID pinout?
The OPA699ID pinout is shown in the pin-configuration section of the official Texas Instruments OPA699 datasheet. The OPA699ID is an 8-pin SOIC device, and its pin functions must be assigned using the manufacturer diagram rather than inferred from a generic SOIC drawing. Check the power pins, input pins, feedback connection, shutdown behavior, and any exposed thermal considerations directly against the datasheet before laying out the PCB.
What is the bandwidth and slew rate of the OPA699ID?
The OPA699ID provides a 1 GHz gain-bandwidth product, a 260 MHz -3 dB bandwidth, and a 1400 V/µs slew rate. According to the Texas Instruments OPA699 datasheet, these figures characterize its wideband voltage-feedback signal path and make it suitable for high-speed ADC drive and test-instrumentation circuits. Actual closed-loop bandwidth also depends on the configured noise gain and the stability of the surrounding feedback network.
Can the OPA699ID drive an ADC input?
Yes, the OPA699ID is well suited to driving a high-speed ADC input because it combines a 260 MHz -3 dB bandwidth with built-in bipolar output limiting. According to the Texas Instruments OPA699 datasheet, its limiter permits the output to approach approximately 1 V from each rail and delivers up to 120 mA. The ADC input range should still be checked, and the limiter should be treated as an additional protection layer rather than a substitute for correct input scaling.
Why is the OPA699ID stable only at gains of +4 or higher?
The OPA699ID is a high-gain voltage-feedback amplifier whose frequency compensation is optimized for closed-loop noise gains of +4 V/V and above. According to the Texas Instruments OPA699 datasheet, it is not unity-gain stable. A gain below +4 can produce excessive peaking, ringing, or instability, so attenuate the input or add suitable gain in the feedback network before routing the signal to the amplifier.
How quickly does the OPA699ID recover from overdrive?
The OPA699ID recovers from overdrive in 1 ns. According to the Texas Instruments OPA699 datasheet, the fast recovery characteristic supports rapid return to linear operation after the bipolar output limiter is engaged. This behavior is valuable in pulse-processing and ADC-interface circuits where a transient excursion could otherwise leave the amplifier output distorted for a comparatively long interval.
OPA699ID versus OPA699IDG4: which version should be selected?
Choose the OPA699IDG4 when its green manufacturing finish is required by the sourcing specification; otherwise, the standard OPA699ID offers the same core amplifier function. The documented OPA699IDG4 remains a single-channel, 1 GHz gain-bandwidth-product device in an 8-pin SOIC package. Confirm the exact ordering suffix, environmental requirements, and current manufacturer lifecycle status before treating the two orderable variants as interchangeable.
What is the best drop-in replacement for the OPA699ID?
The closest documented same-family drop-in is the OPA699IDG4 because it retains the OPA699 architecture, 1 GHz gain-bandwidth product, 260 MHz -3 dB bandwidth, 8-pin SOIC package, and 120 mA output-current capability. Its key distinction is the green manufacturing finish rather than a change in the core voltage-feedback amplifier. A verified cross-brand replacement with matching limiting behavior, package, and pinout was not identified, so PCB rework may be required if a functionally similar amplifier is selected.
What can replace the OPA699ID without changing the PCB?
The OPA699IDG4 is a same-family, same-package option for a PCB that uses the standard OPA699ID footprint and signal topology. It preserves the 1 GHz gain-bandwidth product, 260 MHz -3 dB bandwidth, 1400 V/µs slew rate, and 8-pin SOIC package documented for the amplifier family. Confirm the limiting behavior, shutdown implementation, supply range, and pin functions against the manufacturer datasheet before production substitution.
When should I choose the OPA699ID over a general-purpose high-speed amplifier?
Choose the OPA699ID when the design benefits from integrated bipolar output limiting, approximately ±10 mV limiter accuracy, and 1 ns recovery after overdrive. According to the Texas Instruments OPA699 datasheet, the device also supports a 1 GHz gain-bandwidth product and is stable from a noise gain of +4. A general-purpose high-speed amplifier may provide wider bandwidth in some cases, but it does not automatically provide the same integrated limiting function.
Is the OPA699ID suitable for precision measurement and instrumentation?
The OPA699ID is suitable for high-speed instrumentation when bandwidth and overload behavior matter more than low offset or drift. It offers a 1 GHz gain-bandwidth product, 260 MHz -3 dB bandwidth, and approximately 1.5 mV input offset, while the integrated limiter helps constrain large input excursions. For precision DC measurements, evaluate offset-voltage stability, input bias current, and noise requirements against the complete error budget.
Where can I buy the OPA699ID and check its current lead time?
Use the Request a Quote form on this page to request the OPA699ID, current availability, minimum order quantity, and lead time. The manufacturer lists the OPA699ID as an active 8-pin SOIC ordering option, while changing order quantities, packaging, and delivery timing should be confirmed directly for the current build. Do not use a historical price as a procurement commitment.
What is the price of the OPA699ID?
Use the Request a Quote form on this page for the current OPA699ID unit pricing and volume breaks. Pricing depends on order quantity, package form, contract terms, and current market conditions, and it can change without notice. The structured commercial fields on this page provide the latest machine-readable purchasing reference for XAIPART, while a formal quote confirms the quantity and price for your specific order.
Is the OPA699ID in stock and what is its lead time?
Confirm current OPA699ID stock and lead time through the Request a Quote form on this page. The Texas Instruments product page identifies OPA699ID as an active ordering option, but component inventory and delivery schedules fluctuate by package form and order volume. A quotation request provides the most appropriate path for obtaining an allocation, delivery estimate, and shipment plan for the intended quantity.
What design constraints matter when laying out the OPA699ID PCB?
Keep feedback components, input traces, and supply-bypass connections close to the OPA699ID to minimize parasitic inductance and maintain stability at its 1 GHz gain-bandwidth product. The device is stable only for noise gains of +4 or higher, so include that requirement in the first-stage feedback design. According to the Texas Instruments OPA699 datasheet, supply bypassing is particularly important because the amplifier can operate at supply voltages as high as 12 V.

Mühendislik referans verileri: OPA699ID — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the OPA699ID when a wideband voltage-feedback amplifier must also limit output amplitude, recover quickly from overload, or protect a downstream ADC. Its 1 GHz gain-bandwidth product, 260 MHz -3 dB bandwidth, 1400 V/µs slew rate, and ±10 mV limiter accuracy support high-speed signal conditioning, but the circuit must operate at a noise gain of +4 or higher. Select OPA699IDG4 when the green manufacturing designation is required, and OPA699IDRG4 when the tape-and-reel ordering form suits the assembly process. The same-family unqualified suffixes can be considered only after their temperature, qualification, and lifecycle details are checked against the production requirements. If the OPA699ID's integrated limiter is unnecessary, a general-purpose high-speed amplifier may offer a different gain-stability range, but it must be evaluated independently for bandwidth, distortion, and overdrive behavior.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün OPA699IDG4 OPA699IDRG4 OPA699UID OPA699UIDG4
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package SOIC-8 (D) SOIC-8 (D) SOIC-8 (D) SOIC-8 (D) SOIC-8 (D)
Number of Channels 1 channel 1 channel 1 channel 1 channel 1 channel
Amplifier Architecture Voltage-feedback Voltage-feedback Voltage-feedback Voltage-feedback Voltage-feedback
Gain-Bandwidth Product 1000 MHz 1000 MHz 1000 MHz 1000 MHz 1000 MHz
-3 dB Bandwidth 260 MHz 260 MHz 260 MHz 260 MHz 260 MHz
Slew Rate 1400 V/µs 1400 V/µs 1400 V/µs 1400 V/µs 1400 V/µs
Minimum Stable Gain +4 V/V +4 V/V +4 V/V +4 V/V +4 V/V
Output Current 120 mA 120 mA 120 mA 120 mA 120 mA
Output Limiting Bipolar, approximately 1 V from each rail Bipolar, approximately 1 V from each rail Bipolar, approximately 1 V from each rail Bipolar, approximately 1 V from each rail Bipolar, approximately 1 V from each rail
Overdrive Recovery Time 1 ns 1 ns 1 ns 1 ns 1 ns

Ana Farklılayıcılar

  • Integrated high-speed bipolar output limiting (karşılaştırma:OPA828ID)
  • Wideband signal-path performance (karşılaştırma:OPA699IDG4)
  • Fast overload recovery for transient protection (karşılaştırma:OPA699IDRG4)

Tasarım Notları

Do not configure the OPA699ID as a unity-gain voltage follower. The device is stable for noise gains of +4 V/V and above; using a lower gain can create ringing or instability. Establish the required noise gain in the feedback network, including any input attenuation, and confirm the resulting closed-loop bandwidth against the signal bandwidth. If the desired gain is below +4, use an additional gain stage or reconsider whether a unity-gain-stable amplifier is more appropriate.

Keep the feedback loop, input connection, and supply-bypass capacitor physically short to minimize parasitic inductance and capacitance. The OPA699ID has a 1 GHz gain-bandwidth product and 260 MHz -3 dB bandwidth, so PCB reactance can affect stability, bandwidth, and transient response. Use a continuous ground plane, short return paths, and decoupling placed directly at the supply pins. Avoid routing sensitive input and feedback nets beneath or parallel to fast switching-node traces.

Treat the internal limiter as a defined output boundary rather than a complete substitute for input-range protection. Its accuracy is approximately ±10 mV and its output can approach 1 V from each supply rail, but downstream circuitry must still tolerate that range. Check the ADC absolute maximum ratings, configure the OPA699ID at +4 noise gain or higher, and evaluate settling behavior with the complete source impedance, feedback network, and acquisition timing.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The OPA699ID is listed as an active Texas Instruments ordering option. Compliance attributes were not established from the manufacturer documentation excerpts, so they remain unknown rather than inferred.

Veri doğrulanma tarihi: 2026-11-19 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

OPA699ID datasheet OPA699ID specifications OPA699ID pinout OPA699ID datasheet pdf OPA699ID equivalent OPA699ID replacement OPA699ID cross reference OPA699ID vs OPA828ID OPA699ID SOIC-8 pinout OPA699ID ADC interface OPA699ID 1 GHz amplifier OPA699ID price OPA699ID stock Texas Instruments OPA699ID

İlgili Bileşenler ve Terimler

Texas Instruments OPA699 OPA699ID OPA699IDG4 OPA699IDRG4 OPA699UID OPA699UIDG4 OPA828ID voltage-feedback amplifier operational amplifier linear amplifier analog IC gain-bandwidth product slew rate bipolar output limiting overdrive recovery ADC interface SOIC-8 surface-mount package signal integrity feedback network ADS8519IDB ADS1262IPW
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle