Texas Instruments

OPA842ID - 400 MHz Low-Distortion Op Amp | Texas Instruments

MPN: OPA842ID ✓ Aktif
±5 V to ±6 V Vdss 8-pin SOIC (D) Package
MOQ: 1 |

OPA842ID Genel Bakış

Texas Instruments OPA842ID is a wideband, low-distortion, unity-gain-stable voltage-feedback operational amplifier with a 400 MHz gain-bandwidth product, 400 V/us slew rate, and single-amplifier configuration in an 8-pin SOIC package. It operates from ±5 V to ±6 V and is specified for -40 °C to +85 °C ambient temperature operation.

An operational amplifier is a high-gain differential amplifier used to amplify small input signals while imposing minimal distortion or unwanted noise. The OPA842 belongs to the voltage-feedback amplifier family within the broader operational-amplifier and signal-conditioning semiconductor hierarchy. Its unity-gain stability permits operation as a low-noise gain stage without requiring external compensation for a unity-gain configuration.

The device uses a voltage-feedback architecture with two internal gain stages. According to the Texas Instruments OPA842 product information, this design provides a combination of high speed and dynamic range while maintaining low harmonic distortion across a wide frequency range. The 400 MHz gain-bandwidth product supports high-bandwidth signal processing, while the 400 V/us slew rate allows the amplifier to reproduce large-amplitude, rapidly changing signals with limited slew distortion.

OPA842ID is suitable for test and measurement, communications, video, imaging, and general-purpose analog signal-chain applications. It can serve as a low-gain buffer, a wideband voltage amplifier, a driver for downstream circuitry, or an active element in analog filtering and feedback networks. Unity-gain stability is especially useful when the required closed-loop gain is close to 1.

The principal design tradeoff is operating speed versus power dissipation and system noise. High-speed feedback loops require short, well-controlled PCB traces, stable power-supply bypassing, and careful termination of unused inputs. Follow the pin-description and typical-application tables in the manufacturer datasheet when assigning input bias, supply connections, output loads, and compensation values.

This product page consolidates the verified device identity, package and operating details, application guidance, comparison parameters, and design considerations needed to evaluate OPA842ID before schematic capture or prototype assembly.

Drop-in alternatifler için OPA842ID — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

OPA842IDG4

✅ Yerleştirme
📦 8-pin SOIC (D)
Same OPA842 family and 8-pin SOIC footprint; ordering suffix differs, with the 400 MHz bandwidth and 400 V/us slew rate retained, while exact lead-finish and packing details require confirmation

📋 Katalogda Olmayan Referans Alternatifi

OPA842IDR

✅ Yerleştirme
📦 8-pin SOIC (D)
Same OPA842 family and 8-pin SOIC footprint; suffix selects an alternate orderable configuration, with no quantified core electrical change documented in the verified comparison listing

📋 Katalogda Olmayan Referans Alternatifi

OPA842IDRG4

✅ Yerleştirme
📦 8-pin SOIC (D)
Same OPA842 family and 8-pin SOIC footprint; suffix combines alternate orderable and lead-finish characteristics, with no quantified change to 400 MHz bandwidth or 400 V/us slew rate documented

📋 Katalogda Olmayan Referans Alternatifi

OPA842ID Maksimum Değerlendirmeler & Elektriksel Özellikler

Amplifier Type Voltage-feedback operational amplifier
Number of Circuits 1 circuit
Gain-Bandwidth Product 400 MHz
Slew Rate 400 V/us
Unity-Gain Stable Yes
Architecture Two internal gain stages
Supply Voltage Range ±5 V to ±6 V
İşletim Sıcaklığı Aralığı -40 °C to +85 °C
Paket 8-pin SOIC (D)
Pin Sayısı 8 pins
Montaj Türü Surface mount
Minimum Gain 1 V/V

OPA842ID 8-pin soic (d) Pin Yapısı Kılavuzu

OPA842ID (8-pin soic (d) paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.

8-pin soic (d) paket pin çizelgesi için OPA842ID

Ayrıntılı pin çıkış verisi mevcut değil: OPA842ID.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

OPA842ID için uygundur 6 uygulamas: Wideband Instrumentation Signal Conditioning, Communications Receiver Front End, Video Signal Amplification, High-Speed Active Filtering, Precision Feedback Control, Buffering and Driver Stages.

🖥️

Wideband Instrumentation Signal Conditioning

OPA842ID fits wideband instrumentation because its 400 MHz gain-bandwidth product and 400 V/us slew rate preserve the amplitude and phase relationship of rapidly changing sensor signals. The unity-gain-stable voltage-feedback architecture allows the amplifier to serve directly as a buffer or as a low-noise gain stage when higher closed-loop gains are required. Placing the device close to the sensor and its analog-to-digital converter can reduce parasitic loading and improve signal integrity. Designers should still evaluate input noise, offset, common-mode range, and output-swing limits against the precision requirements of the measurement chain.

🌐

Communications Receiver Front End

OPA842ID is suitable for intermediate-frequency and wideband receiver signal conditioning where fast settling and low distortion are important. Its 400 MHz gain-bandwidth product provides bandwidth for amplitude- and phase-corrected gain stages, while the 400 V/us slew rate reduces distortion on high-amplitude bursts. Unity-gain stability supports use as a buffer between RF-demodulated stages and downstream converters. The implementation should include controlled impedance routing, short feedback paths, and local supply bypassing so that high-speed behavior is not limited by board parasitics.

📺

Video Signal Amplification

OPA842ID can amplify video signals in monitoring, imaging, and broadcast equipment when its speed is sufficient for the target bandwidth. The 400 MHz gain-bandwidth product offers ample closed-loop bandwidth for many video paths, and the 400 V/us slew rate helps maintain waveform shape during transitions. Because the amplifier is unity-gain stable, it can support both unity-gain buffering and moderate gain configurations. Confirm output swing, load capability, gain flatness, and distortion for the specific video format before fixing the circuit.

📡

High-Speed Active Filtering

OPA842ID is useful in active analog filters that need high bandwidth and low distortion. Its unity-gain-stable voltage-feedback topology can be configured in conventional inverting and non-inverting filter networks, while the two-stage internal architecture is intended to provide strong speed and dynamic-range performance. Component values should account for the amplifier’s gain-bandwidth behavior, output loading, and feedback-noise contributions. Place filter resistors and capacitors close to the relevant pins and validate stability and response across the intended frequency range with the manufacturer’s application information.

⚡

Precision Feedback Control

OPA842ID can serve in high-bandwidth feedback-control loops where rapid correction and low harmonic distortion are valuable. The 400 V/us slew rate allows the amplifier to respond quickly to error signals, and unity-gain stability simplifies direct unity-follower implementations. Care is required because high-speed feedback systems can amplify delay, board capacitance, and compensation-network tolerances. The loop should be evaluated for stability, noise, output-current demand, and supply rejection, with component placement following the manufacturer’s high-speed layout guidance.

🔧

Buffering and Driver Stages

OPA842ID works as a high-speed buffer or output driver when a source cannot directly drive the intended load. Unity-gain stability avoids the need for external compensation in a follower configuration, and the 400 MHz gain-bandwidth product provides substantial open-loop bandwidth for closed-loop signal processing. The 400 V/us slew rate improves edge fidelity on fast transients. Engineers should verify output-current capability, output-voltage swing, capacitive-load stability, and power dissipation using the manufacturer electrical characteristics before assigning the final load.

What are the key specifications of OPA842ID that engineers should know?
OPA842ID is a single wideband voltage-feedback operational amplifier with a 400 MHz gain-bandwidth product, 400 V/us slew rate, and unity-gain stability. According to the Texas Instruments OPA842 product information, it uses two internal gain stages and operates from ±5 V to ±6 V. The device is offered in an 8-pin SOIC package with an operating temperature range of -40 °C to +85 °C. These characteristics make it suitable for high-speed, low-distortion signal chains where accurate reproduction of high-frequency and large-amplitude waveforms is important.
What is the operating voltage of OPA842ID?
OPA842ID operates from ±5 V to ±6 V, meaning that each supply rail must remain within its specified range under all operating conditions. According to the Texas Instruments OPA842 product information, the amplifier is designed around dual supplies and uses separate positive and negative supply pins. Designers should verify absolute maximum and recommended operating conditions in the manufacturer datasheet, maintain adequate rail headroom, and bypass the supply pins close to the device to limit supply-noise coupling into high-speed feedback loops.
Is OPA842ID unity-gain stable?
Yes, OPA842ID is unity-gain stable, allowing it to operate in a closed-loop gain of 1 without external frequency compensation. According to the Texas Instruments OPA842 product information, the amplifier uses a voltage-feedback architecture with two internal gain stages. This makes the device useful for buffers, low-gain amplifiers, driver stages, and feedback-control circuits, provided the output load, supply voltage, and feedback-network values remain within the limits defined by the manufacturer datasheet.
Where can I download the OPA842ID datasheet PDF?
The official OPA842 datasheet and product documentation are available from the Texas Instruments OPA842 product page at https://www.ti.com/product/OPA842. The orderable-part information for OPA842ID is also linked from https://www.ti.com/product/OPA842/part-details/OPA842ID. Use the manufacturer document for the complete pin-description table, electrical characteristics, typical performance curves, recommended operating conditions, and example application circuits rather than relying on abbreviated distributor summaries.
Where can I find the OPA842ID pinout?
The OPA842ID pinout is documented in the Texas Instruments OPA842 manufacturer datasheet, with the ordering information for the 8-pin SOIC (D) package shown at https://www.ti.com/product/OPA842/part-details/OPA842ID. The device has eight pins in the D package. Use the pin-description table and package drawing in that document when assigning the differential inputs, output, supply rails, and any no-connect positions, because the SOIC pin functions must be matched to the selected package variant.
What is the gain-bandwidth product of OPA842ID?
OPA842ID has a 400 MHz gain-bandwidth product. According to the Texas Instruments OPA842 product information, this bandwidth supports high-speed closed-loop operation when accompanied by suitable feedback components. The gain-bandwidth product should not be interpreted as a guaranteed 400 MHz bandwidth at every closed-loop gain or output amplitude; consult the manufacturer datasheet for gain-bandwidth and stability curves, output swing limits, slew-rate behavior, and the recommended gain settings.
What is the slew rate of OPA842ID and why does it matter?
OPA842ID has a 400 V/us slew rate, allowing its output to change voltage rapidly without excessive slew-rate distortion. According to the Texas Instruments OPA842 product information, the amplifier is intended to combine high speed with low harmonic distortion. Slew rate is especially important for large-amplitude square waves, pulse edges, video-like signals, and feedback systems. Actual output linearity also depends on load, supply voltage, gain, output swing, and frequency, so evaluate the relevant manufacturer performance curves.
Where can I buy OPA842ID online?
Use the Request a Quote form on this page to request OPA842ID availability, current unit pricing, and quantity-break information for the 8-pin SOIC (D) package. The request should include the required quantity, target date, and acceptable shipment quantity. Because price and inventory can change, request a current quotation rather than relying on an archived listing. The manufacturer orderable-part page is also available for checking the exact OPA842ID configuration.
What is the price of OPA842ID?
Current OPA842ID pricing is shown through the Request a Quote workflow on this page. Submit the required quantity and, if applicable, a target date to obtain a current unit-price quotation. The verified product results do not display a qualifying quantity-break table for the exact MPN, so no static price figure is reproduced here. This avoids presenting stale or ambiguous pricing while preserving a direct path to a transaction-ready quote.
What is the lead time for OPA842ID?
Request the current OPA842ID lead time through the Request a Quote form on this page. Include your required quantity, production schedule, and approved delivery location so the quotation can reflect the actual order commitment. The verified product results identify the exact 8-pin SOIC orderable part but do not state a fixed manufacturing lead time. For scheduled production, request the lot date and any packaging or traceability requirements before committing the component to the assembly plan.
Is OPA842ID in stock?
Check current OPA842ID stock and available order quantity by submitting the Request a Quote form on this page. Inventory can vary by package, shipment quantity, and order date, so a live quote is more useful than a static stock statement. The manufacturer ordering page identifies OPA842ID as the D-package orderable variant, but it does not provide a quantity-specific stock commitment for this request.
What can replace OPA842ID?
A valid drop-in replacement for OPA842ID must use the same 8-pin SOIC footprint and preserve pin compatibility, supply range, gain-bandwidth product, slew rate, unity-gain stability, and required output performance. No independently verified cross-manufacturer drop-in equivalent was established for this update, so a substitute should not be assumed from a similar bandwidth alone. Use the manufacturer datasheet pin table and electrical characteristics to validate any proposed replacement before changing a production schematic.
Is OPA842ID the same as OPA842IDR?
OPA842ID and OPA842IDR represent different ordering codes rather than necessarily different electrical devices. The verified results identify OPA842ID as the 8-pin SOIC (D) configuration, while comparison listings associate OPA842IDR with another ordering method for the OPA842 family. Package suffix details such as tube, tape-and-reel, or reel packaging should be checked on the manufacturer orderable-part page. Electrical equivalence alone does not guarantee that a customer’s required shipping format or labeling is satisfied.
What is the best Texas Instruments equivalent for OPA842ID?
The closest ordering-based alternative identified for OPA842ID is another Texas Instruments order code from the same OPA842 family, such as OPA842IDR, OPA842IDG4, or OPA842IDRG4. Their suitability depends on the manufacturer’s ordering table, package form, and customer requirements. Texas Instruments OPA842IDG4 and OPA842IDR appeared in verified comparison results, but they were not treated as distinct drop-in engineering alternatives because the family and packaging information available here does not establish an independent functional difference.
When should I choose OPA842ID over a lower-speed voltage-feedback amplifier?
Choose OPA842ID when the signal path needs both a 400 MHz gain-bandwidth product and a 400 V/us slew rate while retaining unity-gain stability. According to the Texas Instruments OPA842 product information, the device is designed for wideband, low-distortion operation. A lower-speed amplifier may be preferable when bandwidth, slew rate, power dissipation, or noise are not critical. OPA842ID is the stronger choice for high-bandwidth instrumentation, signal conditioning, and feedback stages, provided its supply requirements and board-layout demands are acceptable.
Is OPA842ID suitable for test and measurement and video signal conditioning?
OPA842ID is suitable for high-speed test, measurement, and signal-conditioning stages because it combines a 400 MHz gain-bandwidth product, 400 V/us slew rate, unity-gain stability, and low-distortion voltage-feedback operation. According to the Texas Instruments OPA842 product information, these characteristics support wideband signal reproduction. Suitability for a specific instrument depends on output amplitude, load, noise, accuracy, and bandwidth; validate those requirements against the manufacturer electrical characteristics and typical application circuits.
What should I check before using OPA842ID in a high-speed PCB design?
Check power-supply bypassing, feedback-loop layout, output loading, unused-input handling, and stable reference or feedback components before using OPA842ID at high speed. The amplifier’s 400 V/us slew rate can excite parasitic inductance and capacitance if traces are long or feedback components are placed away from the device. According to the Texas Instruments OPA842 application information, proper high-speed PCB design and component selection are essential; follow the manufacturer’s recommended layout and typical circuits for the final implementation.

Mühendislik referans verileri: OPA842ID — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose OPA842ID when a signal path requires a wideband, unity-gain-stable voltage-feedback amplifier with a 400 MHz gain-bandwidth product and 400 V/us slew rate. It is particularly appropriate for instrumentation, communications, video, active filtering, and feedback-control blocks where low harmonic distortion and rapid waveform reproduction justify the device’s speed-oriented power and layout requirements. The verified results did not establish five distinct pin-compatible alternatives with independently verified electrical differences, so OPA842IDR, OPA842IDG4, and OPA842IDRG4 should not be treated as automatically interchangeable without checking the manufacturer ordering table and customer packaging requirements. If the application does not require this bandwidth or slew rate, a lower-speed, lower-power amplifier may offer a simpler and more thermally conservative implementation.

Tasarım Notları

Place the OPA842ID close to its feedback network and the signal it drives. Keep input and feedback traces short, use a continuous ground reference, and avoid routing sensitive nodes beneath or alongside high-speed output and supply paths. The 400 V/us slew rate can couple through supply and ground impedance, so component placement and return paths are as important as nominal trace length.

Use the shortest practical connection from each supply pin to local decoupling. Confirm that the dual-rail source can support the amplifier’s operating current and transient demand within the ±5 V to ±6 V supply range. Do not substitute a lower-voltage rail arrangement without checking the absolute maximum and recommended operating conditions in the manufacturer datasheet.

Avoid assuming that unity-gain stability guarantees stable operation with every capacitive or inductive load. Check the recommended output-load conditions, use a suitable isolation resistor if required, and validate the final network at the intended frequency and output amplitude. Also follow the datasheet’s guidance for any no-connect input pin rather than leaving an input floating.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The verified product results do not state a specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status for OPA842ID. The operating-temperature range of -40 °C to +85 °C does not itself establish AEC-Q100 qualification.

İlgili Aramalar

OPA842ID datasheet OPA842ID datasheet pdf OPA842ID pinout OPA842ID specifications OPA842ID equivalent OPA842ID replacement OPA842ID cross reference OPA842ID SOIC-8 Texas Instruments OPA842ID OPA842ID price OPA842ID stock OPA842 400 MHz amplifier OPA842ID application circuit OPA842ID vs OPA842IDR OPA842ID schematic

İlgili Bileşenler ve Terimler

Texas Instruments OPA842ID OPA842 OPA842IDR OPA842IDG4 OPA842IDRG4 voltage-feedback operational amplifier operational amplifier signal-conditioning amplifier analog semiconductor unity-gain stable gain-bandwidth product slew rate low harmonic distortion 400 MHz 400 V/us dual-supply operation 8-pin SOIC SOIC package family surface-mount package test and measurement video signal conditioning communications receiver active filter feedback control
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle