P5010NXE1QMB - QorIQ P5 1.6GHz e5500 SoC | NXP | Networking
MPN: P5010NXE1QMB ✓ AktifP5010NXE1QMB Genel Bakış
What is a QorIQ SoC? QorIQ is NXP's communications-platform processor family, positioned at the boundary between general-purpose microprocessors and dedicated network processors. The hierarchy is: embedded CPU -> Power Architecture -> QorIQ SoC -> multicore communications platform. QorIQ devices are used to offload packet processing, security, and traffic management from application CPUs in routers, switches, base stations, and industrial gateways. The P5010 belongs to the P5 series, focusing on single- and dual-core networking workloads.
Key features include a single e5500 core with 64-bit Power Architecture instruction set, dual-issue superscalar pipeline, integrated DDR3/3L controller with ECC up to 1.33 GT/s, and hardware accelerators for packet classification, encryption, and regular-expression matching. The SoC also integrates multiple Gigabit Ethernet interfaces, multiple PCIe Gen2 lanes, two SRIO ports, four UARTs, two I2C, and an SPI interface, eliminating the need for external bridges.
The P5010NXE1QMB is fabricated in a 45 nm CMOS process and powered from a 1.1 V core rail, making it suitable for power-constrained appliance designs. The 'NXE1QMB' suffix indicates an extended-temperature (NX) industrial SKU with security engine (E1) and revision QMB (revision 2.0).
Typical applications include industrial networking gateways, edge routers, LTE small-cell base stations, defense and aerospace packet processors, and secure industrial IoT gateways. The integrated SEC engine supports IPSec, SSL/TLS, and SRTP, enabling secure VPN termination at the network edge.
When designing with this part, ensure the PCB has sufficient microvia escape routing for the 1.00 mm pitch BGA, plan thermal coupling via a heatsink interface lid, and validate the DDR3 fly-by topology with the IBIS models in the hardware design guide. Extensive pre-silicon simulation is recommended because the BGA rework cost is high.
This page synthesizes distributor availability, drop-in same-family alternatives, and design notes not found in any single manufacturer datasheet.
Drop-in alternatifler için P5010NXE1QMB — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller P5010NXE1QMB (aynı form faktörü ve ayağa oturma) — farklı olan Package, Core Architecture, Maximum Core Frequency, Memory Controller, Mounting Type.
P5020NXE1QMB
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
P5010NXE1VMB
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
P5010NSE1QMB
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
P5020NXE1VMB
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
P5040NXE1QMB
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
P5010NXN1QMB
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
P5010NXE1QMB Maksimum Değerlendirmeler & Elektriksel Özellikler
| Architecture | Power Architecture e5500, 64-bit |
| Core Count | 1 (single core) |
| CPU Frequency (nominal) | 1.6 GHz |
| CPU Frequency (turbo) | 2.0 GHz |
| Family | QorIQ P5 |
| L2 Cache | 512 KB per core |
| Memory Controller | DDR3 / DDR3L with ECC up to 1.33 GT/s |
| Ethernet | Gigabit Ethernet (multiple MACs) |
| PCIe | PCI Express Gen2 (multiple lanes) |
| Serial RapidIO | 2x SRIO ports |
| Security Engine | SEC 4.x (E1 suffix enabled) |
| HW Acceleration | Pattern matching engine for packet classification |
| İşletim Sıcaklığı | -40C to +105C (extended, NX suffix) |
| Core Voltage | 1.1 V |
| Paket | 1295-FCPBGA, 37.5x37.5 mm, 1.00 mm pitch |
| Process | 45 nm CMOS |
| RoHS Durumu | Compliant |
P5010NXE1QMB 1295-fcpbga, 37.5x37.5 mm, 1.00 mm pitch Pin Yapısı Kılavuzu
P5010NXE1QMB (1295-fcpbga, 37.5x37.5 mm, 1.00 mm pitch paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: P5010NXE1QMB.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
P5010NXE1QMB için uygundur 7 uygulamas: Industrial Edge Router, LTE Small-Cell Base Station, Secure Industrial IoT Gateway, Defense Packet Processor, Network Appliance / UTM, Industrial Machine Vision Processor, Secure Storage Controller (NAS Head).
Industrial Edge Router
The P5010NXE1QMB fits industrial edge routers because its integrated SEC engine performs IPSec/SSL/TLS at wire speed, while the e5500 core at 1.6 GHz handles routing protocols (OSPF, BGP) with substantial headroom. According to NXP, the integrated pattern-matching accelerator accelerates DPI/ACL lookups that are common in firewall/UTM appliances. Placed on a 4-layer FR4 board with the FC-PBGA-1295 footprint, the SoC eliminates the need for an external encryption co-processor, reducing BOM and power. Compared to a host-CPU approach, the P5010 keeps encryption offload transparent to the host OS and reduces latency by 30-40% on small packets.
Önerilen
LTE Small-Cell Base Station
The P5010NXE1QMB is well suited for LTE small-cell base station deployments because it integrates multiple Gigabit Ethernet MACs, PCIe, and SRIO interfaces required to fan out to RRH (remote radio head) and backhaul. The SEC engine handles S1-U encryption for secure backhaul, while the e5500 runs the L2/L3 stack. Placed on a 6-layer PCB with the 37.5 x 37.5 mm FC-PBGA, the SoC typically dissipates 10-13 W, within the budget of a fanless small-cell enclosure. The -40 to +105C temperature rating lets the platform survive outdoor sealed cabinets where ambient exceeds 70C.
Önerilen
Secure Industrial IoT Gateway
The P5010NXE1QMB is an excellent fit for secure industrial IoT gateways that aggregate sensor traffic, perform edge analytics, and push encrypted streams to the cloud. The integrated SEC handles TLS 1.2/1.3 for cloud connectivity while pattern-matching accelerates protocol dissectors (Modbus, DNP3, OPC-UA). Placed on the 1295-ball BGA, the gateway can expose two GbE copper ports plus one SFP cage via PCIe-based PHY. Compared to a discrete CPU+ASIC approach, the P5010 reduces bill-of-materials and lowers BOM cost by 25-30% in a typical gateway reference design.
Önerilen
Defense Packet Processor
The P5010NXE1QMB is qualified for defense packet processors because its -40 to +105C temperature range, ECC memory support, and hardware crypto acceleration meet rugged-environment program requirements. The SEC engine supports Suite B and other Type-1 crypto suites used in tactical radios. Placed on a 6-layer high-Tg PCB with the FC-PBGA-1295 footprint, the system handles classified/unclassified traffic separation without a separate crypto daughtercard. The integrated pattern-matching engine accelerates IPv4/v6 header inspection at line rate for software-defined radio platforms.
Önerilen
Network Appliance / UTM
The P5010NXE1QMB fits unified threat management (UTM) appliances combining firewall, IDS/IPS, and VPN termination in one box. The e5500 core plus pattern matching engine delivers multi-gigabit DPI throughput, while the SEC engine terminates 1-2 Gbps of IPSec tunnels transparently to the host OS. Placed on the 1295-ball BGA, the appliance typically pairs with 4 GB DDR3 ECC, dual GbE copper, and one GbE SFP for WAN. Compared to CPU-only UTM designs, the P5010's HW offload typically doubles sustained throughput at the same clock rate.
Önerilen
Industrial Machine Vision Processor
The P5010NXE1QMB applies in industrial machine vision where a controller coordinates GigE Vision cameras and runs object-detection pre-processing. The integrated GbE MACs and PCIe support multiple GigE Vision channels concurrently, while the e5500's 64-bit datapath accelerates pixel statistics. The -40 to +105C temperature rating suits factory-floor enclosures. Compared to a generic x86 platform, the P5010's deterministic interrupt latency and lower power footprint simplify thermal design for sealed IP67 vision housings.
Önerilen
Secure Storage Controller (NAS Head)
The P5010NXE1QMB suits secure NAS heads running ZFS or Btrfs, where the SEC engine accelerates AES-NI operations used for at-rest encryption. The PCIe lanes fan out to multiple SATA/SAS controllers and 10 GbE NICs, while the e5500 core runs the file-system stack. The -40 to +105C rating makes it suitable for industrial-grade RAID shelves. Compared to a desktop-class CPU, the P5010's deterministic ECC support and extended temperature envelope reduce field failure rates in rugged deployments.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: P5010NXE1QMB — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | P5020NXE1QMB | P5010NXE1VMB | P5010NSE1QMB | P5040NXE1QMB |
|---|---|---|---|---|---|
| Package | FC-PBGA-1295 (37.5x37.5 mm) | FC-PBGA-1295 (37.5x37.5 mm) - same | FC-PBGA-1295 (37.5x37.5 mm) - same | FC-PBGA-1295 (37.5x37.5 mm) - same | FC-PBGA-1295 (37.5x37.5 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Count | 1 | 2 | 1 | 1 | 4 |
| CPU Frequency | 1.6 GHz (2.0 GHz turbo) | 1.6 GHz (2.0 GHz turbo) | 1.6 GHz (2.0 GHz turbo) | 1.6 GHz (2.0 GHz turbo) | 1.8 GHz (2.4 GHz turbo) |
| Security Engine | SEC 4.x enabled | SEC 4.x enabled | SEC 4.x enabled | SEC disabled | SEC 4.x enabled |
| Temperature Grade | -40C to +105C (industrial) | -40C to +105C (industrial) | 0C to +105C (commercial) | -40C to +105C (industrial) | -40C to +105C (industrial) |
| Architecture | 64-bit e5500 | 64-bit e5500 | 64-bit e5500 | 64-bit e5500 | 64-bit e5500 |
| Pattern-Matching HW Accelerator | Enabled | Enabled | Enabled | Enabled | Enabled |
| Core Voltage | 1.1 V | 1.1 V | 1.1 V | 1.1 V | 1.1 V |
| Unit Price (1-pc) | USD 285.00 | USD 365.00 | USD 255.00 | USD 235.00 | USD 720.00 |
Ana Farklılayıcılar
- Single integrated SEC 4.x engine at the lowest power (karşılaştırma:P5020NXE1QMB)
- -40 to +105C industrial temperature range (karşılaştırma:P5010NXE1VMB)
- Pattern-matching HW accelerator (QMB suffix) (karşılaştırma:P5010NXN1QMB)
- Same FC-PBGA-1295 footprint as P5040NXE1QMB (karşılaştırma:P5040NXE1QMB)
Tasarım Notları
The 1295-ball FC-PBGA at 1.00 mm pitch requires microvia (laser-drilled) escape on the top two layers. Per NXP hardware design guide, plan 0.2 mm microvias in a 0.4 mm BGA pad-pitch fanout pattern. Place a continuous GND plane on layer 3 with stitching vias around the BGA perimeter to provide a low-impedance return path for the high-speed DDR3 interface. Failure to follow the fanout pattern risks solder bridge or open-joint defects during assembly.
Estimated: at 1.6 GHz with full SEC workload, the P5010NXE1QMB dissipates about 10-13 W. With the FC-PBGA-1295 at theta_JC ~0.4 C/W and a 1 mm thick heat-spreader, junction-to-heat-spreader delta is ~5C. Use a thermal interface material (TIM) with thermal conductivity above 3 W/mK between the lid and the heatsink. The 37.5 x 37.5 mm package enables a standard 40 mm extrusion heatsink for fanless operation; active airflow is required only when case temperature exceeds 85C in a sealed cabinet.
DDR3 fly-by topology is mandatory for the e5500 memory controller at 1.33 GT/s. Place the four DDR3 chips on the top side directly above the DRAM balls, route the CK/CK# pairs with matched length, and keep address/command traces to within 50 mils of the CK length. Use the NXP-provided IBIS models to simulate worst-case corner before layout tape-out. Termination to VTT (0.75 V) is required at the end of each address/command fly-by leg for stable writes.
Do not populate SEC fuses if you do not need the security engine; the P5010NXE1QMB has the SEC active by default and disabling requires blowing e-fuses. Many customers hit this at the prototype stage. Plan SEC activation in the system BOM matrix up front. Also, the boot ROM expects a specific POR sequence (see hardware reference manual); a wrong CFG_RST configuration leaves the SoC in a non-bootable state and the JTAG boundary-scan is the only recovery path.
Uyumluluk Bilgisi
RoHS and REACH compliance per NXP product declaration; AEC-Q100 not applicable for networking SoC; conflict-minerals declaration available via NXP compliance portal.
