PCM1702PG4 - 20-Bit 768 kSPS Audio DAC | Texas Instruments
MPN: PCM1702PG4 ✓ AktifPCM1702PG4 Genel Bakış
A digital-to-analog converter, or DAC, converts digital audio samples into a continuous analog voltage. The PCM1702 belongs to the broader digital-to-analog converter, audio converter, data-converter IC, and mixed-signal semiconductor hierarchy. Its role in an audio signal chain is to reconstruct a left, right, or other discrete analog channel from a digital bitstream while preserving low distortion around bipolar zero.
The PCM1702 uses advanced sign-magnitude architecture to reduce unwanted glitches and nonlinear transitions near zero. Its principal characteristics include 20-bit resolution, a maximum sample rate of 768 kSPS, serial digital input, and approximately -96 dB typical full-scale distortion. These specifications make it suitable for high-resolution CD-audio playback, professional digital mixing consoles, digital instruments, studio monitors, and other equipment requiring a discrete high-resolution audio output channel.
Because the device uses a bipolar output architecture, its analog section requires positive and negative supply rails. The documented operating range is approximately ±4.75 V to ±5.25 V, while its analog output is referenced to ground through the application network. The 16-pin DIP package favors through-hole construction and makes the converter suitable for legacy audio boards, repair assemblies, and designs where a surface-mount package would be inconvenient.
In a typical audio path, a digital audio controller or receiver supplies serial data and a master clock to the PCM1702. The converter then drives a balanced or unbalanced output stage through the appropriate coupling, filtering, and impedance-matching network. Attention must be paid to clock timing, digital data format, analog supply cleanliness, output loading, and the required output filtering because those details strongly influence distortion and signal integrity.
The PCM1702PG4 is best considered when an existing design specifically calls for a 16-pin DIP audio DAC and its clock, supply, and serial interface requirements align with the target board. Before substituting another device, verify the complete pinout, digital timing, analog output topology, supply rails, and package dimensions rather than relying only on bit depth and sample rate.
This product record combines the converter's core electrical and packaging characteristics with application guidance, practical design considerations, and verified same-package alternatives. It is intended to help engineers identify whether the PCM1702PG4 fits an audio-conversion, repair, or upgrade requirement before committing to a board-level implementation.
Drop-in alternatifler için PCM1702PG4 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
PCM1702P
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
PCM1702P-KG4
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
PCM1702PG4 Maksimum Değerlendirmeler & Elektriksel Özellikler
| Converter Type | Precision audio digital-to-analog converter |
| Çözünürlük | 20 bit |
| Maximum Conversion Rate | 768 kSPS |
| Supported Audio Sample Rate | 44.1 kHz |
| Analog Supply Voltage Range | +4.75 V to +5.25 V and -4.75 V to -5.25 V |
| Full-Scale Distortion | -96 dB typical |
| Digital Interface | Serial |
| Output Architecture | Advanced sign-magnitude |
| Package Type | 16-pin DIP |
| Terminal Count | 16 terminals |
| Montaj Stili | Through-hole |
| Package Shape | Rectangular |
PCM1702PG4 rectangular Pin Yapısı Kılavuzu
PCM1702PG4 (rectangular paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: PCM1702PG4.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
PCM1702PG4 için uygundur 6 uygulamas: Professional Audio Mixing Console, CD Audio Player, Digital Musical Instrument, Studio Monitor Controller, Legacy Audio Equipment Repair, Digital Recording and Playback System.
Professional Audio Mixing Console
The PCM1702PG4 fits a professional mixing-console output channel where 20-bit resolution and approximately -96 dB typical full-scale distortion support accurate reconstruction of a discrete analog audio signal. It accepts serial digital audio and operates from ±4.75 V to ±5.25 V analog rails. Its 16-pin DIP package also suits long-lived console boards that use through-hole DAC positions. The converter should be paired with a low-jitter clock source, clean supply decoupling, and the console's approved output-filter network. Because performance depends on the complete analog path, clock jitter, digital data timing, grounding, and output-stage loading must be validated together rather than judged from the converter alone.
Önerilen
CD Audio Player
The PCM1702PG4 is appropriate for a 44.1 kHz CD-audio playback path because the manufacturer specifies 44.1 kHz operation, 20-bit conversion, and a maximum rate of 768 kSPS. Its advanced sign-magnitude architecture is particularly relevant when minimizing switching distortion and nonlinear behavior around the zero crossing. A digital audio transport supplies serial data and clock signals, while the DAC drives a balanced or unbalanced reconstruction filter. Designers should preserve the data format and timing specified by the manufacturer datasheet and validate the analog output stage under the intended load. The DIP package also makes this converter practical for audiophile and service-oriented designs using through-hole construction.
Önerilen
Digital Musical Instrument
The PCM1702PG4 can serve as a discrete audio-output channel in a digital piano, synthesizer, organ, or workstation. The 20-bit resolution preserves fine amplitude detail in synthesized or sampled instrument output, while the -96 dB typical full-scale distortion specification supports low visible distortion at full scale. Its serial interface accepts digital audio from a sound engine or control processor, and its bipolar supplies support conventional audio output stages. The principal design concern is clocking: digital data, bit clock, and frame clock must meet the interface timing described by the manufacturer. Layout should keep digital return currents away from the analog output and supply nodes.
Önerilen
Studio Monitor Controller
The PCM1702PG4 is suitable for a studio monitor controller that requires independent high-resolution analog channels rather than a combined codec. Its maximum conversion rate of 768 kSPS provides headroom above 44.1 kHz operation, while 20-bit resolution and approximately -96 dB typical full-scale distortion suit low-level monitoring signals. The converter can feed a conventional balanced monitor amplifier through a reconstruction and impedance-matching network. Supply rails of approximately ±4.75 V to ±5.25 V align with many discrete analog output stages, although the complete signal chain must be checked. Clean references, short analog paths, and careful separation from digital switching currents are essential for preserving converter performance.
Önerilen
Legacy Audio Equipment Repair
The PCM1702PG4 is well suited to repairing legacy professional audio equipment that uses a 16-pin DIP PCM1702 position. The through-hole package permits conventional replacement and board-level rework without introducing a new surface-mount footprint. For a successful repair, compare the complete datasheet pinout, supply voltages, clock connections, digital input format, and analog output polarity with the failed device or circuit documentation. Same-family options such as PCM1702P and PCM1702P-KG4 may simplify sourcing, but they should not be selected solely from the printed model name. Confirm that the replacement's ordering suffix meets the original equipment's quality, temperature, and qualification requirements before returning the unit to service.
Önerilen
Digital Recording and Playback System
The PCM1702PG4 can be used in a digital recording or playback system that requires a dedicated high-resolution playback converter. Its 20-bit conversion capability and 768 kSPS maximum rate support standard high-rate audio workflows, while its bipolar analog output suits discrete preamplifier and line-output circuitry. The converter should be positioned close to the analog output stage so that the filtered analog signal travels only a short distance before amplification. Digital clock routing must be controlled to minimize jitter, and both analog supply rails should be locally decoupled. The 16-pin DIP format is especially practical in equipment designs intended for maintainability, field repair, and long product lifetimes.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: PCM1702PG4 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | PCM1702P | PCM1702P-KG4 |
|---|---|---|---|
| Package | 16-pin DIP | 16-pin DIP | 16-pin DIP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Resolution | 20 bit | 20 bit | 20 bit |
| Maximum Conversion Rate | 768 kSPS | 768 kSPS | 768 kSPS |
| Digital Interface | Serial | Serial | Serial |
| Output Architecture | Advanced sign-magnitude | Advanced sign-magnitude | Advanced sign-magnitude |
| Mounting Style | Through-hole | Through-hole | Through-hole |
Ana Farklılayıcılar
- High-resolution conversion with a maximum rate suitable for professional audio channels (karşılaştırma:PCM1702P)
- Explicit drop-in family relationship with unchanged core conversion ratings (karşılaştırma:PCM1702P-KG4)
- Legacy-oriented through-hole construction (karşılaştırma:PCM1702P)
Tasarım Notları
The converter requires positive and negative analog rails in the documented ±4.75 V to ±5.25 V region. Place local high-frequency bypass capacitors at the supply pins and use separate analog return routing to keep digital return currents from crossing the converter's analog ground reference. Confirm the complete analog output stage's voltage swing before assuming the rails can be reduced or shared.
Route serial data, bit clock, and frame clock away from the analog output and reconstruction-filter components. The manufacturer timing requirements govern setup, hold, and clock relationships; verify them at the actual connector and ground-reference points rather than only at the source device. A low-jitter clock source is important because it reduces modulation of the reconstructed analog output.
Use the complete pin-description and application-circuit information in the manufacturer datasheet when planning the 16-pin DIP footprint. Keep the converter's analog output path short, place reconstruction components close to their associated pins, and maintain a quiet analog ground region. Confirm the package orientation and pin-one marking during board rework because a reversed DIP can connect the bipolar rails incorrectly.
Do not select a replacement from resolution and sample rate alone. For PCM1702P and PCM1702P-KG4, verify the numbered pin assignments, digital interface timing, analog supply range, output polarity, and exact 16-pin DIP dimensions. Also verify the ordering suffix against the original equipment specification, because a family-level drop-in relationship does not remove the need for grade and qualification review.
Uyumluluk Bilgisi
Compliance declarations are not stated for PCM1702PG4 in the available manufacturer-linked and distributor information. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status therefore remain unknown.