Texas Instruments

PCM1702PG4 - 20-Bit 768 kSPS Audio DAC | Texas Instruments

N.º da peça: PCM1702PG4 ✓ Ativo
+4.75 V to +5.25 V and -4.75 V to -5.25 V Vdss 16-pin DIP Package
MOQ: 1 |

PCM1702PG4 Visão geral

The Texas Instruments PCM1702PG4 is a precision 20-bit, single-channel digital-to-analog converter designed for professional audio equipment, with a maximum conversion rate of 768 kSPS and bipolar analog output in a 16-pin through-hole DIP package. It operates from dual ±4.75 V to ±5.25 V analog supplies and accepts serial digital audio data. The converter supports 44.1 kHz audio and is specified to deliver low full-scale distortion of -96 dB typical.

A digital-to-analog converter, or DAC, converts digital audio samples into a continuous analog voltage. The PCM1702 belongs to the broader digital-to-analog converter, audio converter, data-converter IC, and mixed-signal semiconductor hierarchy. Its role in an audio signal chain is to reconstruct a left, right, or other discrete analog channel from a digital bitstream while preserving low distortion around bipolar zero.

The PCM1702 uses advanced sign-magnitude architecture to reduce unwanted glitches and nonlinear transitions near zero. Its principal characteristics include 20-bit resolution, a maximum sample rate of 768 kSPS, serial digital input, and approximately -96 dB typical full-scale distortion. These specifications make it suitable for high-resolution CD-audio playback, professional digital mixing consoles, digital instruments, studio monitors, and other equipment requiring a discrete high-resolution audio output channel.

Because the device uses a bipolar output architecture, its analog section requires positive and negative supply rails. The documented operating range is approximately ±4.75 V to ±5.25 V, while its analog output is referenced to ground through the application network. The 16-pin DIP package favors through-hole construction and makes the converter suitable for legacy audio boards, repair assemblies, and designs where a surface-mount package would be inconvenient.

In a typical audio path, a digital audio controller or receiver supplies serial data and a master clock to the PCM1702. The converter then drives a balanced or unbalanced output stage through the appropriate coupling, filtering, and impedance-matching network. Attention must be paid to clock timing, digital data format, analog supply cleanliness, output loading, and the required output filtering because those details strongly influence distortion and signal integrity.

The PCM1702PG4 is best considered when an existing design specifically calls for a 16-pin DIP audio DAC and its clock, supply, and serial interface requirements align with the target board. Before substituting another device, verify the complete pinout, digital timing, analog output topology, supply rails, and package dimensions rather than relying only on bit depth and sample rate.

This product record combines the converter's core electrical and packaging characteristics with application guidance, practical design considerations, and verified same-package alternatives. It is intended to help engineers identify whether the PCM1702PG4 fits an audio-conversion, repair, or upgrade requirement before committing to a board-level implementation.

Alternativas drop-in para PCM1702PG4 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

PCM1702P

✅ Drop-In
📦 16-pin DIP
Same PCM1702 family and 20-bit/768 kSPS electrical characteristics; the ordering suffix is less specific, with 0% change in the documented resolution and maximum conversion rate.

📋 Alternativa de referência (fora do catálogo)

PCM1702P-KG4

✅ Drop-In
📦 16-pin DIP
Same 16-DIP pin arrangement and PCM1702 functional characteristics; grade and ordering suffix differ while the documented 20-bit resolution and 768 kSPS maximum rate remain unchanged.

📋 Alternativa de referência (fora do catálogo)

PCM1702PG4 Classificações máximas e características elétricas

Converter Type Precision audio digital-to-analog converter
Resolução 20 bit
Maximum Conversion Rate 768 kSPS
Supported Audio Sample Rate 44.1 kHz
Analog Supply Voltage Range +4.75 V to +5.25 V and -4.75 V to -5.25 V
Full-Scale Distortion -96 dB typical
Digital Interface Serial
Output Architecture Advanced sign-magnitude
Package Type 16-pin DIP
Terminal Count 16 terminals
Estilo de montagem Through-hole
Package Shape Rectangular

Guia de Configuração de Pinos do PCM1702PG4 rectangular

Configuração de pinos para PCM1702PG4 (pacote rectangular). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.

Diagrama de pinagem do pacote rectangular para PCM1702PG4

Nenhum dado detalhado de pinagem disponível para PCM1702PG4.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

PCM1702PG4 é adequado para 6 aplicaçãos: Professional Audio Mixing Console, CD Audio Player, Digital Musical Instrument, Studio Monitor Controller, Legacy Audio Equipment Repair, Digital Recording and Playback System.

🎧

Professional Audio Mixing Console

The PCM1702PG4 fits a professional mixing-console output channel where 20-bit resolution and approximately -96 dB typical full-scale distortion support accurate reconstruction of a discrete analog audio signal. It accepts serial digital audio and operates from ±4.75 V to ±5.25 V analog rails. Its 16-pin DIP package also suits long-lived console boards that use through-hole DAC positions. The converter should be paired with a low-jitter clock source, clean supply decoupling, and the console's approved output-filter network. Because performance depends on the complete analog path, clock jitter, digital data timing, grounding, and output-stage loading must be validated together rather than judged from the converter alone.

🎧

CD Audio Player

The PCM1702PG4 is appropriate for a 44.1 kHz CD-audio playback path because the manufacturer specifies 44.1 kHz operation, 20-bit conversion, and a maximum rate of 768 kSPS. Its advanced sign-magnitude architecture is particularly relevant when minimizing switching distortion and nonlinear behavior around the zero crossing. A digital audio transport supplies serial data and clock signals, while the DAC drives a balanced or unbalanced reconstruction filter. Designers should preserve the data format and timing specified by the manufacturer datasheet and validate the analog output stage under the intended load. The DIP package also makes this converter practical for audiophile and service-oriented designs using through-hole construction.

🎵

Digital Musical Instrument

The PCM1702PG4 can serve as a discrete audio-output channel in a digital piano, synthesizer, organ, or workstation. The 20-bit resolution preserves fine amplitude detail in synthesized or sampled instrument output, while the -96 dB typical full-scale distortion specification supports low visible distortion at full scale. Its serial interface accepts digital audio from a sound engine or control processor, and its bipolar supplies support conventional audio output stages. The principal design concern is clocking: digital data, bit clock, and frame clock must meet the interface timing described by the manufacturer. Layout should keep digital return currents away from the analog output and supply nodes.

🔊

Studio Monitor Controller

The PCM1702PG4 is suitable for a studio monitor controller that requires independent high-resolution analog channels rather than a combined codec. Its maximum conversion rate of 768 kSPS provides headroom above 44.1 kHz operation, while 20-bit resolution and approximately -96 dB typical full-scale distortion suit low-level monitoring signals. The converter can feed a conventional balanced monitor amplifier through a reconstruction and impedance-matching network. Supply rails of approximately ±4.75 V to ±5.25 V align with many discrete analog output stages, although the complete signal chain must be checked. Clean references, short analog paths, and careful separation from digital switching currents are essential for preserving converter performance.

🔧

Legacy Audio Equipment Repair

The PCM1702PG4 is well suited to repairing legacy professional audio equipment that uses a 16-pin DIP PCM1702 position. The through-hole package permits conventional replacement and board-level rework without introducing a new surface-mount footprint. For a successful repair, compare the complete datasheet pinout, supply voltages, clock connections, digital input format, and analog output polarity with the failed device or circuit documentation. Same-family options such as PCM1702P and PCM1702P-KG4 may simplify sourcing, but they should not be selected solely from the printed model name. Confirm that the replacement's ordering suffix meets the original equipment's quality, temperature, and qualification requirements before returning the unit to service.

🖥️

Digital Recording and Playback System

The PCM1702PG4 can be used in a digital recording or playback system that requires a dedicated high-resolution playback converter. Its 20-bit conversion capability and 768 kSPS maximum rate support standard high-rate audio workflows, while its bipolar analog output suits discrete preamplifier and line-output circuitry. The converter should be positioned close to the analog output stage so that the filtered analog signal travels only a short distance before amplification. Digital clock routing must be controlled to minimize jitter, and both analog supply rails should be locally decoupled. The 16-pin DIP format is especially practical in equipment designs intended for maintainability, field repair, and long product lifetimes.

Resumo dos produtos recomendados

PCM1702P Same-family 16-pin DIP converter option Usado em: Professional Audio Mixing Console, CD Audio Player, Digital Musical Instrument, Studio Monitor Controller, Legacy Audio Equipment Repair, Digital Recording and Playback System PCM1702P-KG4 Same-family 16-pin DIP converter option Usado em: Professional Audio Mixing Console, CD Audio Player, Digital Musical Instrument, Studio Monitor Controller, Legacy Audio Equipment Repair, Digital Recording and Playback System
What is the PCM1702PG4?
The PCM1702PG4 is a precision 20-bit, single-channel audio digital-to-analog converter from Texas Instruments. According to the manufacturer datasheet, it supports conversion rates up to 768 kSPS, uses serial digital input, and is packaged in a 16-pin DIP for through-hole audio equipment and repair applications.
What is the resolution and maximum sample rate of PCM1702PG4?
The PCM1702PG4 provides 20-bit resolution and a maximum conversion rate of 768 kSPS. According to the manufacturer datasheet, the device supports 44.1 kHz audio operation and uses an advanced sign-magnitude architecture intended to reduce glitches and nonlinear behavior around bipolar zero.
What power supply voltage does PCM1702PG4 require?
The PCM1702PG4 requires positive and negative analog supply rails of approximately ±4.75 V to ±5.25 V. According to the manufacturer datasheet, its bipolar output architecture requires both rails; designers should decouple the supplies near the device and account for startup and supply-sequencing requirements in the surrounding circuit.
Where can I download the PCM1702PG4 datasheet PDF?
The PCM1702PG4 datasheet PDF is available through the Texas Instruments PCM1702 documentation and the manufacturer-linked Burr-Brown datasheet archive. The archive identifies PCM1702PG4 as a 20-bit, 768 kSPS serial-interface DAC in a 16-pin DIP; use the pin-description and application tables when assigning PCB connections.
Where can I find the PCM1702PG4 pinout?
The PCM1702PG4 pinout is documented in the pin-description table of the manufacturer datasheet. The component uses a 16-pin DIP footprint, but the complete numbered signal assignments should be read directly from that table before PCB routing or replacement work; the device is not a generic 16-pin pin-compatible interface.
Where to buy PCM1702PG4 online?
PCM1702PG4 availability can be requested through the Request a Quote form on this page. The form is the appropriate route for current supply, lot traceability, and quantity requirements. Because the converter is a mature through-hole audio DAC, buyers should also specify whether a standard grade or an automotive-qualified family suffix is required.
What is the price of PCM1702PG4?
Current pricing for PCM1702PG4 should be requested through the Request a Quote form on this page. The quote request allows the exact MPN, quantity, shipment destination, and traceability requirements to be evaluated together. Buyers should avoid substituting a differently suffixed PCM1702 variant without confirming grade, package, and environmental requirements.
What is the lead time for PCM1702PG4?
The current lead time for PCM1702PG4 should be confirmed through the Request a Quote form on this page. Include the required quantity, date code, packaging preference, and whether the purchase is for maintenance, production, or repair. The Request a Quote workflow is used instead of publishing a potentially stale lead-time estimate.
Is PCM1702PG4 in stock?
PCM1702PG4 stock should be confirmed through the Request a Quote form on this page. Submit the desired quantity and any required date-code or traceability constraints for an availability response. For maintenance work, mention whether substitution is permitted before shipment, but do not assume that a different package or suffix can be fitted without adaptation.
PCM1702PG4 vs PCM1702P - which is better for a legacy audio board?
PCM1702P is the closest same-family option for a legacy board that specifically uses the 16-pin DIP PCM1702 interface. The PCM1702PG4 is the ordered target MPN, while PCM1702P is a less-specific ordering code associated with the same converter family; confirm the exact pinout, grade, and package marking against the manufacturer datasheet before substitution.
Can PCM1702P-KG4 replace PCM1702PG4?
PCM1702P-KG4 can be considered a drop-in candidate for PCM1702PG4 because it is identified as the same 16-DIP PCM1702 family with consistent terminals and functional characteristics. The principal difference is the ordering and temperature-grade suffix. According to the comparison information, no circuit modification is expected, but production substitution should still be qualified.
When should I choose PCM1702PG4 over a modern surface-mount DAC?
Choose PCM1702PG4 when maintaining a 16-pin DIP board, reproducing a proven legacy audio design, or avoiding a substantial analog-output redesign is more important than minimizing board area. A modern surface-mount DAC may offer smaller packaging and different integration, but it can require revised clocking, filtering, power, grounding, and output-stage connections.
Is PCM1702PG4 suitable for high-resolution digital audio?
The PCM1702PG4 is suitable for high-resolution discrete audio channels because it provides 20-bit resolution, operation up to 768 kSPS, and approximately -96 dB typical full-scale distortion. Its practical audio quality still depends on the clock source, digital timing margin, analog supplies, output filter, analog output stage, and grounding of the completed board.
What is the best drop-in replacement for PCM1702PG4?
The closest documented drop-in choices are PCM1702P and PCM1702P-KG4 from the same Texas Instruments PCM1702 family. Both are associated with the same 16-DIP interface and substantially identical conversion characteristics. The ordering suffix may indicate grade or qualification differences, so the replacement should be checked against the original purchasing specification and qualified in the target equipment.
What can replace PCM1702PG4 in an audio converter board?
PCM1702P and PCM1702P-KG4 are the documented same-family replacements for PCM1702PG4 in a compatible 16-pin DIP circuit. They preserve the PCM1702 functional characteristics and terminal arrangement, making them preferable to unrelated DACs. Confirm clock polarity, data timing, analog output polarity, supply sequencing, and PCB orientation before production use.
What are the key specifications of PCM1702PG4 that engineers should know?
The key PCM1702PG4 specifications are 20-bit resolution, a maximum rate of 768 kSPS, serial digital input, ±4.75 V to ±5.25 V bipolar analog supplies, approximately -96 dB typical full-scale distortion, and a 16-pin DIP package. According to the manufacturer datasheet, the converter also uses advanced sign-magnitude architecture to improve behavior around zero.

Dados de referência de engenharia para PCM1702PG4 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose PCM1702PG4 for a new or maintained design that specifically uses the 16-pin DIP Texas Instruments PCM1702 interface and needs 20-bit conversion up to 768 kSPS with bipolar analog rails. It is particularly attractive for professional audio, digital instruments, studio equipment, and legacy repair boards where maintainability and unchanged through-hole construction are priorities. PCM1702P is the closest general same-family option when a less-specific ordering designation is acceptable. PCM1702P-KG4 is appropriate when its ordering or grade suffix matches the original equipment specification. Both alternatives preserve the documented core conversion characteristics and 16-pin DIP interface, but engineers should still verify temperature grade, qualification, and production requirements. Do not choose an unrelated modern DAC unless the board can be redesigned for a different package, supply arrangement, clock interface, and analog output network.

Comparação com alternativas

Parâmetro Este produto PCM1702P PCM1702P-KG4
Package 16-pin DIP 16-pin DIP 16-pin DIP
Brand Texas Instruments Texas Instruments Texas Instruments
Resolution 20 bit 20 bit 20 bit
Maximum Conversion Rate 768 kSPS 768 kSPS 768 kSPS
Digital Interface Serial Serial Serial
Output Architecture Advanced sign-magnitude Advanced sign-magnitude Advanced sign-magnitude
Mounting Style Through-hole Through-hole Through-hole

Principais diferenciais

  • High-resolution conversion with a maximum rate suitable for professional audio channels (vs PCM1702P)
  • Explicit drop-in family relationship with unchanged core conversion ratings (vs PCM1702P-KG4)
  • Legacy-oriented through-hole construction (vs PCM1702P)

Notas de projeto

The converter requires positive and negative analog rails in the documented ±4.75 V to ±5.25 V region. Place local high-frequency bypass capacitors at the supply pins and use separate analog return routing to keep digital return currents from crossing the converter's analog ground reference. Confirm the complete analog output stage's voltage swing before assuming the rails can be reduced or shared.

Route serial data, bit clock, and frame clock away from the analog output and reconstruction-filter components. The manufacturer timing requirements govern setup, hold, and clock relationships; verify them at the actual connector and ground-reference points rather than only at the source device. A low-jitter clock source is important because it reduces modulation of the reconstructed analog output.

Use the complete pin-description and application-circuit information in the manufacturer datasheet when planning the 16-pin DIP footprint. Keep the converter's analog output path short, place reconstruction components close to their associated pins, and maintain a quiet analog ground region. Confirm the package orientation and pin-one marking during board rework because a reversed DIP can connect the bipolar rails incorrectly.

Do not select a replacement from resolution and sample rate alone. For PCM1702P and PCM1702P-KG4, verify the numbered pin assignments, digital interface timing, analog supply range, output polarity, and exact 16-pin DIP dimensions. Also verify the ordering suffix against the original equipment specification, because a family-level drop-in relationship does not remove the need for grade and qualification review.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

Compliance declarations are not stated for PCM1702PG4 in the available manufacturer-linked and distributor information. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status therefore remain unknown.

Dados verificados em: 2026-11-15 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

PCM1702PG4 datasheet PCM1702PG4 pinout PCM1702PG4 datasheet pdf PCM1702PG4 specifications Texas Instruments PCM1702PG4 PCM1702PG4 20-bit DAC PCM1702PG4 768 kSPS PCM1702PG4 16-pin DIP PCM1702PG4 equivalent PCM1702PG4 replacement PCM1702PG4 vs PCM1702P PCM1702PG4 audio DAC application PCM1702PG4 price PCM1702PG4 stock PCM1702PG4 digital audio schematic

Componentes & termos relacionados

Texas Instruments PCM1702PG4 PCM1702P PCM1702P-KG4 digital-to-analog converter DAC audio converter data-converter IC mixed-signal semiconductor 20-bit resolution 768 kSPS 44.1 kHz audio advanced sign-magnitude architecture serial digital interface bipolar analog output full-scale distortion 16-pin DIP through-hole package professional audio digital musical instrument studio monitor controller CD audio player clock jitter analog supply decoupling
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ