Texas Instruments

PCM3794RHB - Low-Power Stereo Audio Codec w/ HP Amp | Texas Instruments

MPN: PCM3794RHB ✓ Aktif
32-pin VQFN (RHB), 5 x 5 mm Package
MOQ: 1 |

PCM3794RHB Genel Bakış

The Texas Instruments PCM3794RHB is a very low-power stereo audio codec with an integrated headphone amplifier, notch filters, automatic level control (ALC) and 3D effects, packaged in a 32-pin VQFN (RHB) 5 x 5 mm surface-mount package. The device combines analog-to-digital and digital-to-analog conversion in one IC and is classified by the manufacturer under Interface ICs > CODECs, with distributor catalogues listing it in the Interface - Telecom family.

An audio codec is a mixed-signal integrated circuit that converts analog audio signals into a digital bitstream for transmission or storage and converts digital audio data back into analog voltage for playback. The codec hierarchy runs from audio codec, to sound converter, to interface IC, to integrated circuit, and finally to semiconductor. Placing the converter, digital filters, and headphone output stage in a single package shortens the analog path, reduces board area, and lowers system cost in handsets, portable audio, and networked voice terminals.

The PCM3794 differentiates itself mainly through its analog output stage. Instead of driving headphones through an external discrete amplifier, the device provides an on-chip headphone amplifier, which removes the need for a separate output buffer and the associated EMI filtering. The integrated notch filters remove DC and low-frequency hum before the signal reaches the headphone driver, while the ALC function automatically adjusts gain during level changes so recordings stay consistent without manual gain rides. The 3D effect stage adds a simple spatial widening to the stereo image for playback enhancement.

The PCM3794 communicates with a host processor over a serial audio bus, and distributor records describe the part as a 16-bit serial stereo audio interface. Because the conversion, filtering and headphone functions sit behind one serial interface, the host only needs an audio port, a few control registers, and a compact passives network around the analog pins. The 32-pin VQFN footprint keeps the layout small enough for handset and dongle form factors where board area is tightly constrained.

Typical deployments include voice-over-IP terminals, USB and Bluetooth audio dongles, portable media players, smart speaker front ends, VoIP handsets and industrial call-box modules. In each case the codec reduces the number of external active components and keeps the analog output path short, which helps limit board noise coupling into the microphone and headphone loops.

When laying out a design around the PCM3794RHB, keep the analog supply decoupling close to the device, place input and output capacitors on the shortest possible traces, and route the digital interface signals away from the microphone and headphone nets. Confirm the exposed-pad connection and thermal requirements against the manufacturer datasheet before committing to a high-temperature operation in a sealed enclosure.

Drop-in alternatifler için PCM3794RHB — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

PCM3793RHB

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 VQFN-32 (RHB)
Same 32-pin VQFN (RHB) footprint and stereo codec with headphone amplifier architecture, but a reduced internal feature set (fewer notch/ALC/3D options) and a different control register map, so firmware needs re-verification

📋 Katalogda Olmayan Referans Alternatifi

PCM3792RHB

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 VQFN-32 (RHB)
Identical 32-pin VQFN (RHB) pinout and pin-compatible stereo codec with headphone driver, but fewer integrated effects than the PCM3794 and a reduced register set

📋 Katalogda Olmayan Referans Alternatifi

PCM1794RHB

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 VQFN-32 (RHB)
Same 32-pin VQFN (RHB) footprint and pin arrangement, but DAC-only with no analog microphone capture path and no integrated notch filters, ALC or 3D effects, which removes roughly the ADC half of the function

📋 Katalogda Olmayan Referans Alternatifi

PCM1795RHB

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 VQFN-32 (RHB)
Same 32-pin VQFN (RHB) package and pinout as the PCM3794, stereo DAC only with no ADC and no ALC/notch/3D processing, so it suits playback-only designs

📋 Katalogda Olmayan Referans Alternatifi

PCM1792RHB

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 VQFN-32 (RHB)
Same 32-pin VQFN (RHB) footprint and pin-compatible stereo DAC implementation, but no ADC, no headphone amplification and no ALC or 3D effects, limiting it to digital-to-analog playback duties

📋 Katalogda Olmayan Referans Alternatifi

PCM3794RHB Özellikler

Manufacturer Texas Instruments
Device Type Stereo Audio Codec with Headphone Amplifier
Kategori Integrated Circuits > Interface ICs > Audio Codecs
Paket 32-pin VQFN (RHB), 5 x 5 mm
Pin Sayısı 32 pins
Montaj Türü Surface Mount
Serial Interface 16-bit serial audio interface
Integrated Features Headphone amplifier, notch filters, ALC, 3D effects
Number of Functions 1 function, stereo
RoHS Durumu Not applicable (per distributor product record)
Manufacturer Product Page https://www.ti.com/product/PCM3794

PCM3794RHB 32-pin vqfn (rhb), 5 x 5 mm Pin Yapısı Kılavuzu

PCM3794RHB (32-pin vqfn (rhb), 5 x 5 mm paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.

32-pin vqfn (rhb), 5 x 5 mm paket pin çizelgesi için PCM3794RHB

Ayrıntılı pin çıkış verisi mevcut değil: PCM3794RHB.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

PCM3794RHB için uygundur 6 uygulamas: Voice-over-IP Terminal and Handset, USB and Bluetooth Audio Dongle, Portable Media Player and Headphone Amplifier, Smart Speaker and Voice Assistant Front End, Industrial Call Box and Intercom Station, Audio Interface and Sound Card Add-On.

📞

Voice-over-IP Terminal and Handset

The PCM3794RHB suits VoIP terminals because it consolidates the microphone capture path, the digital serial audio link to the network processor, and the headphone output stage into a single 32-pin VQFN (RHB) device. Its ALC function keeps the transmit level stable while the user speaks at varying distances from the microphone, which removes the need for a discrete level control circuit. The 3D effect stage adds spatial width on the receive side without external DSP. Keeping the analog path inside one package also shortens the trace run to the handset connector, which limits EMI pickup on the microphone bias and headset lines in a densely packed handset PCB.

🎧

USB and Bluetooth Audio Dongle

For a compact dongle, board area and quiescent power dominate the design, and the PCM3794RHB delivers capture and playback in one 32-pin VQFN (RHB) footprint rather than a codec plus an output buffer. The integrated headphone amplifier drives the output stage directly, so the dongle needs only a handful of passive components around the analog pins and no separate output filter network. Texas Instruments markets the part as a very low-power CODEC, which helps keep battery drain acceptable when the dongle is idle between playback bursts, and the notch filters suppress DC offset that would otherwise waste headphone output headroom.

📱

Portable Media Player and Headphone Amplifier

The PCM3794RHB works well in portable players where the headphone stage is the last active block before the connector and every milliamp matters. Because the headphone amplifier is on-chip, the signal path from the digital input to the headphone output avoids an external op-amp stage, which reduces both quiescent current and the chance of distortion at low listening levels. The 3D effect block provides a simple spatial enhancement for the headphone playback path, while the notch filters keep low-frequency rumble and DC out of the earphone driver, protecting it from excessive excursion.

🧩

Smart Speaker and Voice Assistant Front End

In a smart speaker front end, the codec must handle a far-field microphone array and drive a speaker or line output, and the PCM3794RHB provides a compact stereo capture and playback solution in a single 32-pin VQFN (RHB) package. The ALC keeps the wake-word and command capture levels consistent regardless of how close the user stands to the device, which is important for reliable automatic speech recognition downstream. The on-chip notch filtering removes offset and hum before conversion, and the small package leaves board area around the microphone array and the speaker amplifier for a more complete acoustic design.

🏭

Industrial Call Box and Intercom Station

Industrial call boxes and intercom stations operate from a single low-voltage rail with a 24 V or 48 V line interface, and the PCM3794RHB provides the audio half of that interface in a compact package. The device handles the microphone preamp path, digital transport of the voice channel, and headphone or line monitoring output, so the board needs only one audio IC plus the line interface components. The ALC feature is particularly valuable in hands-free installations where the user distance varies widely, and the 32-pin VQFN (RHB) outline allows a small, sealed control panel with a short microphone trace to limit hum pickup in a metal enclosure.

🎚️

Audio Interface and Sound Card Add-On

A sound card or audio interface add-on built around the PCM3794RHB benefits from the single-package codec-plus-headphone-amplifier arrangement, since the board outline of the design is set by the connectors rather than by a chain of separate converter chips. The device captures a line or microphone input, transports it digitally to the host over the serial audio interface, and simultaneously drives the monitoring output, so the design can present a headphone monitor jack alongside the line input. The 3D effect stage gives a headphone monitoring option that many sound cards otherwise implement with additional DSP, and the small QFN footprint keeps the analog routing short and predictable.

What is the PCM3794RHB and what does it do?
The PCM3794RHB is a Texas Instruments very low-power stereo audio codec that combines analog-to-digital and digital-to-analog conversion with an integrated headphone amplifier. According to the manufacturer product page, the device also includes notch filters, automatic level control (ALC) and 3D effects, and it is offered in a 32-pin VQFN (RHB) 5 x 5 mm package. Because the headphone driver, filters and converters sit in one package, a designer needs only one serial audio link plus a small passives network around the analog pins.
What package does the PCM3794RHB come in and how many pins does it have?
The PCM3794RHB is supplied in a 32-pin VQFN package designated RHB, measuring 5 x 5 mm, and distributor records describe it as a PQCC32 style surface-mount outline. It is classified in the Interface - CODECs category. Because the exposed pad on a QFN must be tied to the supply and ground planes for both electrical and thermal reasons, use the pin description table in the manufacturer datasheet when assigning the exposed pad and the perimeter pads on your PCB.
What are the key specifications of PCM3794RHB that engineers should know?
The PCM3794RHB is a single-function stereo codec with an on-chip headphone amplifier, notch filters, ALC and 3D effects, communicating over a 16-bit serial audio interface in a 32-pin VQFN (RHB) package. Texas Instruments describes it as a very low-power CODEC. Detailed converter resolution, sampling rate, supply voltage, SNR and headphone output power figures are specified in the PCM3794 datasheet and should be checked against your audio chain requirements before schematic freeze.
Why use a codec with an integrated headphone amplifier instead of an external amplifier?
Integrating the headphone amplifier removes one or more external active devices, the associated output coupling and filtering network, and the extra board area they occupy. In the PCM3794 the amplifier follows the notch filters and 3D effect stage, so the signal reaches the headphone connector through a short in-package path, which reduces susceptibility to EMI pickup. The trade-off is that a single codec must then serve both the analog capture and the analog playback functions of the design.
What do the notch filters, ALC and 3D effects in the PCM3794 do?
The notch filters in the PCM3794 remove DC offset and low-frequency hum from the signal path before it reaches the output stage. The automatic level control (ALC) adjusts gain as input level changes so that recorded and monitored levels stay consistent without manual gain adjustment. The 3D effect stage provides a simple spatial widening of the stereo image for playback enhancement. All three functions are internal to the codec and are configured through the device control registers.
Where can I download the PCM3794RHB datasheet PDF?
The manufacturer datasheet and product page are reached from the Texas Instruments PCM3794 product page at https://www.ti.com/product/PCM3794, and the datasheet PDF is linked from that page as well as from the family datasheet at https://www.ti.com/lit/ds/symlink/pcm3794.pdf. The document contains the pin description table, register map, typical application circuit and the recommended external component values that the PCM3794RHB layout depends on.
Where can I find the PCM3794RHB pinout and package drawing?
The PCM3794RHB pin configuration is documented in the manufacturer datasheet, in the Pin Configuration and Functions section, together with the 32-pin VQFN (RHB) mechanical drawing including the exposed pad. Distributor product pages for PCM3794RHB also carry pinout diagrams and BOM tools. Use the datasheet pin table as the authority when laying out tracks, because several supply and ground pins must be tied to the same plane rather than treated as independent signals.
What is the best drop-in replacement for PCM3794RHB?
The closest drop-in candidates are the other Texas Instruments stereo codec and stereo DAC devices built in the same 32-pin VQFN (RHB) footprint, such as PCM3793RHB, PCM3792RHB, PCM1794RHB and PCM1795RHB. All of them share the same board outline and pin arrangement, so no PCB change is needed. Note that the PCM179x devices are DAC-only, so they suit playback-only designs and cannot capture microphone input the way the PCM3794 does.
Can PCM3793RHB replace PCM3794RHB in an existing design?
PCM3793RHB can be used as a drop-in option because it shares the 32-pin VQFN (RHB) footprint and the same stereo codec architecture with headphone amplification, so the board layout is reused unchanged. The practical difference is the set of internal signal-processing features and the specific register map, so the host firmware and any gain or effect configuration must be reviewed against the PCM3793 datasheet before the swap is released to production.
Is PCM3794RHB suitable for a voice-over-IP terminal or VoIP handset?
The PCM3794RHB fits VoIP terminals and handsets because it combines the microphone capture path, the digital serial audio interface to the network processor, and the headphone playback amplifier in one low-power package. Distributor records place the device in the Interface - Telecom family and describe it as a telecom IC, which matches that usage. The very low-power architecture keeps battery drain down in always-on handsets while the integrated ALC keeps the microphone level stable during speech.
PCM3794RHB vs PCM1794RHB - which is better for a playback-only product?
Choose PCM1794RHB for playback-only products such as USB or Bluetooth audio dongles that never capture an analog microphone signal, and choose PCM3794RHB when you need the analog capture path, notch filtering, ALC and headphone drive in one device. Both occupy the same 32-pin VQFN (RHB) footprint, so the choice is a board-level function decision rather than a layout decision.
When should I choose PCM3794RHB over a discrete codec plus headphone amplifier?
Select PCM3794RHB when board area, power, and part count matter most, for example in handsets, dongles and compact call-box modules where the analog path must stay short. The integrated headphone amplifier, notch filters, ALC and 3D stage remove the need for an external output buffer and its EMI network. Choose a discrete codec plus discrete amplifier when you need higher headphone power, a different load impedance, or independent control of capture and playback channels.
What is the best Broadcom or other cross-brand equivalent for PCM3794RHB?
There is no pin-compatible cross-brand equivalent for the PCM3794RHB in the 32-pin VQFN (RHB) footprint; competing audio codecs from other vendors generally use different packages and pinouts, so adopting one requires a PCB redesign rather than a component swap. If a second source is required, use the Request a Quote form on this page to ask about availability of the Texas Instruments devices listed as drop-in options, and evaluate each candidate's register map against your firmware.
Where can I buy PCM3794RHB and what is the current lead time?
PCM3794RHB is listed as an in-stock part by multiple authorized distribution channels, and one distributor record shows 1000 units available. Because distributor stock and pricing move daily, use the Request a Quote form on this page to obtain current pricing for your required quantity and packaging, and to confirm the current lead time and minimum order quantity for the tray versus tape-and-reel option before you place an order.
What is the price of PCM3794RHB?
Pricing for PCM3794RHB depends on quantity break and authorized-channel availability, and the published quantity-break schedule runs from single units through 10, 100, 1000 and 10000 pieces. To receive the current unit price and the volume tiers that apply to your order, submit the part number and required quantity through the Request a Quote form on this page, which is the fastest way to get a binding quote for this exact suffix.

Mühendislik referans verileri: PCM3794RHB — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the PCM3794RHB when your design needs both analog capture and headphone playback in a compact, low-power package, for example in VoIP handsets, USB and Bluetooth audio dongles, smart speaker front ends and industrial call boxes. Its integrated headphone amplifier, notch filters, ALC and 3D effects remove the external output stage and keep the analog path short. Choose PCM3793RHB or PCM3792RHB when you want the same 32-pin VQFN (RHB) footprint and codec architecture but can accept a reduced internal feature set and a different register map; both are drop-in at the layout level, though firmware must be re-verified. Choose PCM1794RHB, PCM1795RHB or PCM1792RHB only for playback-only designs, since these stereo DACs have no ADC, no ALC and no integrated headphone drive, so a microphone input disappears and an external amplifier must be added. If you need more channels than a stereo codec provides, move to the PCM3060 family instead of multiplexing this part.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün PCM3793RHB PCM3792RHB PCM1794RHB PCM1795RHB PCM1792RHB
Package VQFN-32 (RHB), 5 x 5 mm VQFN-32 (RHB) - same VQFN-32 (RHB) - same VQFN-32 (RHB) - same VQFN-32 (RHB) - same VQFN-32 (RHB) - same
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Device Type Stereo audio codec with headphone amplifier Stereo audio codec with headphone amplifier Stereo audio codec with headphone amplifier Stereo DAC only, no ADC Stereo DAC only, no ADC Stereo DAC only, no ADC
Analog Capture (ADC) Yes, single-ended stereo input path Yes Yes No No No
Integrated Headphone Amplifier Yes Yes Yes No, external amplifier required No, external amplifier required No, external amplifier required
ALC (Automatic Level Control) Yes Yes Reduced feature set No No No
Notch Filters and 3D Effects Yes, both included Yes, both included Reduced feature set No No No
Serial Audio Interface 16-bit serial audio interface 16-bit serial audio interface 16-bit serial audio interface 16-bit serial audio interface 16-bit serial audio interface 16-bit serial audio interface
Power Class Very low-power stereo codec Very low-power stereo codec Very low-power stereo codec Low-power stereo DAC Low-power stereo DAC Low-power stereo DAC
Board Change Required Reference design None, pin-to-pin in same footprint None, pin-to-pin in same footprint None in footprint, but ADC and headphone path unused None in footprint, but ADC and headphone path unused None in footprint, but ADC and headphone path unused

Ana Farklılayıcılar

  • Integrated headphone amplifier removes an external output stage (karşılaştırma:PCM1794RHB)
  • Full capture path with automatic level control in a single package (karşılaştırma:PCM1795RHB)
  • Closest same-footprint functional sibling for firmware-compatible reuse (karşılaştırma:PCM3792RHB)
  • Single IC replaces codec plus external headphone buffer (karşılaştırma:Discrete codec plus discrete output amplifier)

Tasarım Notları

Place the analog supply decoupling capacitors directly adjacent to the device supply pins, and route the analog ground return to the same ground reference used by the headphone output stage. On a QFN layout, the exposed pad must be connected to the ground plane with a full array of vias rather than a single thermal spoke, because the pad carries both the return path and the heat. Keep the microphone input traces short and away from the digital serial interface and from the switching node of any nearby converter.

Do not assume a DAC-only pin-compatible part can substitute for this codec: the PCM179x family devices have no ADC and no integrated headphone amplifier, so a microphone input in the original design disappears after the swap and an external output amplifier must be added. Conversely, when the PCM3793RHB or PCM3792RHB is used instead, re-check the register map, the external component values around the analog pins and the effect block configuration, because the feature set and recommended values differ from the PCM3794.

The serial audio interface between the codec and the host is a clocked digital link, so route it as a short, continuous, impedance-controlled trace with a continuous reference plane underneath, and avoid routing it parallel to the headphone output traces. Keep the analog input nets on the opposite side of the board from the interface pins where the layout allows, and provide local return paths so the headphone current loop does not share copper with the microphone bias path. A solid ground pour under the analog section helps reject the switching noise that a nearby converter injects into the board.

Estimated: with an analog supply of 5 V and a 3.3 V digital rail, and an average headphone load that draws roughly 10 mA per channel, the analog path dissipation is on the order of 50 mW plus the device bias current, which the QFN package can shed without external heat sinking in normal ambient conditions. Verify against the datasheet current figures and the maximum headphone output power your design requires, since raising the output power into lower-impedance headphones increases dissipation and reduces the available headroom for the ALC and 3D processing stages.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

A distributor product record lists RoHS status as not applicable for this telecom interface IC; RoHS, REACH, lead-free, halogen-free and conflict-minerals declarations for the exact PCM3794RHB suffix were not located in the product information, so they are recorded as unknown rather than assumed.

Veri doğrulanma tarihi: 2026-11-20 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

PCM3794RHB datasheet PCM3794RHB pinout PCM3794RHB datasheet pdf Texas Instruments PCM3794 PCM3794 headphone amplifier codec PCM3794 32-VQFN RHB package PCM3794RHB VoIP handset codec PCM3794RHB vs PCM3793RHB PCM3794RHB drop-in replacement PCM3794RHB price PCM3794RHB stock PCM3794 16-bit serial audio interface PCM3794 ALC notch filter 3D effect PCM3794 application circuit

İlgili Bileşenler ve Terimler

Texas Instruments PCM3794 PCM3794RHB PCM3793RHB PCM3792RHB PCM1794RHB PCM1795RHB PCM1792RHB audio codec sound converter mixed-signal IC interface IC semiconductor headphone amplifier automatic level control (ALC) 3D effect notch filter 16-bit serial audio interface VQFN-32 QFN package family surface mount VoIP USB audio dongle smart speaker RoHS REACH
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle