PEX8614-BA50BC - 12-Port Gen 2 PCIe Switch | Broadcom
MPN: PEX8614-BA50BC ✗ Son Kullanım ZamanıPEX8614-BA50BC Genel Bakış
A PCIe switch belongs to the PCI Interface IC category within interface semiconductors. Its function is to connect a host or upstream PCIe device to multiple downstream endpoints while arbitrating transactions, maintaining protocol ordering, and providing a shared switching fabric. The PEX8614 family supports lane configurations that allow system designers to balance port count, bandwidth, packaging, and board-routing requirements across complex PCIe topologies.
Key characteristics include 12 PCIe lanes, 12 switch ports, PCIe Gen 2 operation, a 324-ball HSBGA package, and a 19 mm by 19 mm package footprint. The device also provides a non-blocking internal architecture and supports packet cut-through. These features make it applicable where several PCIe links need consolidation behind a common switching point rather than direct host-to-endpoint routing.
The PEX8614 architecture uses packet cut-through to minimize the time packets remain inside the switch. Broadcom specifies a maximum latency of 140 ns for the x4-to-x1 arrangement and combines this behavior with large packet memory. The resulting architecture can sustain full line-rate operation across ports while supporting low-latency communication and server workloads that benefit from shorter transaction paths.
Typical uses include PCIe expansion systems, external storage appliances, high-bandwidth network equipment, server accelerator platforms, and embedded systems that require more downstream PCIe endpoints than the root complex supports. The 12-lane, 12-port organization is particularly useful when a backplane or system controller must route multiple device links while preserving deterministic packet delivery.
Board design requires careful high-speed signal-integrity work, including controlled impedance routing, continuous reference planes, appropriate via transitions, and minimization of stubs. Power delivery, decoupling, and thermal management must also be designed around the dense 324-contact HSBGA package. Differential-pair routing and connector or package-transition losses should be evaluated as part of the complete PCIe channel budget.
This product record combines the identified PCIe architecture, package, lane, port, latency, and ordering details with application guidance, engineering caveats, and a structured comparison framework. It is intended to help engineers confirm fit, plan routing and power delivery, and determine whether a replacement or redesign is necessary before committing a complex PCIe board to production.
Drop-in alternatifler için PEX8614-BA50BC — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu ürüne yer değiştirme seçenekleri mevcut değil.
Alternatifleri Talep EdinPEX8614-BA50BC Maksimum Değerlendirmeler & Elektriksel Özellikler
| Product Type | PCI Express switch IC |
| PCI Express Generation | Gen 2 |
| Lane Count | 12 lanes |
| Port Count | 12 ports |
| Maximum Packet Cut-Through Latency | 140 ns in x4-to-x1 configuration |
| Internal Switch Architecture | Non-blocking |
| Package Type | 324-contact HSBGA |
| Package Dimensions | 19 mm x 19 mm |
| Terminal Count | 324 terminals |
| Montaj Türü | Surface mount |
| Package Shape | Square |
| Ball Termination | Ball |
PEX8614-BA50BC square Pin Yapısı Kılavuzu
PEX8614-BA50BC (square paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: PEX8614-BA50BC.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
PEX8614-BA50BC için uygundur 6 uygulamas: PCIe Server Expansion, External Storage Appliances, Network Communication Equipment, High-Bandwidth Accelerator Platforms, PCIe Expansion Backplanes, Embedded PCIe Control Systems.
PCIe Server Expansion
The PEX8614-BA50BC fits server expansion designs that need to consolidate multiple downstream PCI Express links behind a single switching point. Its 12-lane, 12-port organization provides substantial fan-out flexibility, while the non-blocking architecture supports full line-rate operation across configured ports. Broadcom documents a maximum packet cut-through latency of 140 ns in an x4-to-x1 arrangement, which is useful where accelerator, storage, and I/O traffic must traverse the switch without excessive protocol delay. The principal design challenge is the 324-contact HSBGA package: the PCB must provide controlled-impedance routing, low-return-loss transitions, dense power delivery, and effective thermal spreading around the device.
External Storage Appliances
PEX8614-BA50BC is applicable to external storage appliances that expose several PCIe paths for NVMe controllers, RAID engines, or accelerator cards. The 12-lane and 12-port architecture allows designers to create a structured switching fabric rather than connect every endpoint directly to a root complex. Packet cut-through behavior helps maintain low transaction latency, and Broadcom reports a maximum of 140 ns in an x4-to-x1 configuration. In a storage enclosure, system designers should still evaluate connector loss, cable or retimer behavior, reference-clock requirements, and the complete end-to-end PCIe channel rather than treating the switch specification as the entire link budget.
Network Communication Equipment
The PEX8614-BA50BC can support communication equipment architectures requiring multiple PCIe paths for network processors, packet processors, crypto engines, and line cards. Broadcom identifies low-latency communications as a principal use case for its packet cut-through switch architecture. With 12 lanes and 12 ports, the device offers considerable topology flexibility for modular systems, but the selected lane-to-port mapping must match the data-path requirements of each endpoint. Board implementation should prioritize low-loss differential routing, uninterrupted reference planes, controlled connector and package transitions, and decoupling close to the power pins to preserve signal integrity under full traffic load.
High-Bandwidth Accelerator Platforms
PEX8614-BA50BC is suitable for accelerator platforms that need multiple PCIe Gen 2 links for compute, fabric, or storage functions. Its non-blocking internal architecture supports full line-rate traffic on the configured ports, while packet cut-through reduces switching delay for latency-sensitive transactions. The 140 ns maximum cited by Broadcom applies specifically to an x4-to-x1 configuration, so system architects should evaluate the actual width conversion and traffic pattern rather than assume the same latency for every path. A 324-contact HSBGA footprint also demands careful escape routing, power-plane partitioning, thermal analysis, and assembly-process qualification.
PCIe Expansion Backplanes
The PEX8614-BA50BC fits expansion backplanes that distribute PCIe connectivity among pluggable cards, mezzanine modules, or rear-panel devices. The 12-lane, 12-port capability allows a single switching component to organize multiple links while retaining a non-blocking internal path. For backplane implementation, designers should model insertion loss through connectors, retimers, vias, and package transitions as one continuous channel. Maintain uninterrupted reference planes and symmetrical length matching on differential pairs, and use the Broadcom ball map and recommended power distribution to avoid signal-integrity degradation that could undermine the documented full line-rate capability.
Embedded PCIe Control Systems
PEX8614-BA50BC can be incorporated into embedded and industrial control systems that need to manage multiple PCIe endpoints such as storage, capture, networking, or modular instrumentation. The 12-port structure reduces the number of direct root-port connections required from the host controller and permits a more organized PCIe topology. Its low-latency packet forwarding is useful when control traffic shares the fabric with data traffic. The device remains a demanding board-level component because of its 324-contact HSBGA package, so designers must provide adequate power planes, carefully placed decoupling, high-quality substrate construction, and thermal paths that prevent localized junction heating during sustained line-rate traffic.
Mühendislik referans verileri: PEX8614-BA50BC — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün |
|---|---|
| Brand | Broadcom |
| Package | 324-contact HSBGA (19 mm x 19 mm) |
| Product Type | PCI Express switch IC |
| PCI Express Generation | Gen 2 |
| Lane Count | 12 lanes |
| Port Count | 12 ports |
| Maximum Packet Cut-Through Latency | 140 ns in x4-to-x1 configuration |
| Internal Architecture | Non-blocking |
| Terminal Count | 324 terminals |
Tasarım Notları
Treat the complete PCIe path as one controlled-impedance channel, including host traces, package transitions, connectors, retimers, and test points. Use the Broadcom ball map and reference design recommendations to define layer transitions and via geometry. Avoid stubs and unnecessary layer changes on high-speed differential pairs, maintain continuous reference planes, and validate insertion loss and return loss against the selected Gen 2 link budget.
Plan the power tree from the current Broadcom PEX 8614 documentation before assigning rail capacitance or regulator selection. Place required bulk and high-frequency decoupling close to the appropriate HSBGA power and ground balls, while minimizing loop area between supply and return connections. Validate steady-state and transient voltage at the package under full line-rate traffic because the dense 324-contact package can demand carefully coordinated power delivery across multiple balls.
Provide a low-resistance thermal path through the board rather than relying only on signal-layer escape routing. Analyze power dissipation in the selected lane and port configuration, estimate junction temperature with the manufacturer's thermal model, and reserve uninterrupted copper beneath the HSBGA where the land pattern permits. Consider a heat-spreader or heat-sink solution when operating temperature margin is insufficient. Thermal design should be completed with the exact package and board stack-up selected for production.
Use the manufacturer ball-assignment drawing as the controlling source for signal routing and power connections; lane numbers and port names alone are insufficient for a 324-contact package. Arrange escape routing to avoid crossings between adjacent high-speed groups, preserve symmetric differential geometry, and separate noisy or switching-supply paths from sensitive receiver references. Have the layout reviewed against the official reference design and independent signal-integrity simulation before fabrication.
Uyumluluk Bilgisi
The identified Broadcom product documentation and distributor snippets do not state the requested compliance or material-declaration statuses. Check the current manufacturer product declaration and assembly documentation before release.