Broadcom

PEX8614-BA50BC - 12-Port Gen 2 PCIe Switch | Broadcom

MPN: PEX8614-BA50BC ✗ Cuối đời
324-contact HSBGA Package
MOQ: 1 |

PEX8614-BA50BC Tóm tắt

Broadcom PEX8614-BA50BC is a PCI Express switch IC with 12 lanes, 12 ports, and PCIe Gen 2 operation, housed in a 324-contact HSBGA package measuring 19 mm by 19 mm. It is designed to fan out multiple PCIe links through a non-blocking internal switch architecture and supports full line-rate packet transfer. Broadcom documents a maximum packet cut-through latency of 140 ns in an x4-to-x1 configuration, making the device suitable for latency-sensitive communication, server, and storage systems.

A PCIe switch belongs to the PCI Interface IC category within interface semiconductors. Its function is to connect a host or upstream PCIe device to multiple downstream endpoints while arbitrating transactions, maintaining protocol ordering, and providing a shared switching fabric. The PEX8614 family supports lane configurations that allow system designers to balance port count, bandwidth, packaging, and board-routing requirements across complex PCIe topologies.

Key characteristics include 12 PCIe lanes, 12 switch ports, PCIe Gen 2 operation, a 324-ball HSBGA package, and a 19 mm by 19 mm package footprint. The device also provides a non-blocking internal architecture and supports packet cut-through. These features make it applicable where several PCIe links need consolidation behind a common switching point rather than direct host-to-endpoint routing.

The PEX8614 architecture uses packet cut-through to minimize the time packets remain inside the switch. Broadcom specifies a maximum latency of 140 ns for the x4-to-x1 arrangement and combines this behavior with large packet memory. The resulting architecture can sustain full line-rate operation across ports while supporting low-latency communication and server workloads that benefit from shorter transaction paths.

Typical uses include PCIe expansion systems, external storage appliances, high-bandwidth network equipment, server accelerator platforms, and embedded systems that require more downstream PCIe endpoints than the root complex supports. The 12-lane, 12-port organization is particularly useful when a backplane or system controller must route multiple device links while preserving deterministic packet delivery.

Board design requires careful high-speed signal-integrity work, including controlled impedance routing, continuous reference planes, appropriate via transitions, and minimization of stubs. Power delivery, decoupling, and thermal management must also be designed around the dense 324-contact HSBGA package. Differential-pair routing and connector or package-transition losses should be evaluated as part of the complete PCIe channel budget.

This product record combines the identified PCIe architecture, package, lane, port, latency, and ordering details with application guidance, engineering caveats, and a structured comparison framework. It is intended to help engineers confirm fit, plan routing and power delivery, and determine whether a replacement or redesign is necessary before committing a complex PCIe board to production.

Bộ thay thế dễ dàng lắp đặt cho PEX8614-BA50BC — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.

Yêu cầu các bộ thay thế

PEX8614-BA50BC Tỷ lệ tối đa & tính chất điện

Product Type PCI Express switch IC
PCI Express Generation Gen 2
Lane Count 12 lanes
Port Count 12 ports
Maximum Packet Cut-Through Latency 140 ns in x4-to-x1 configuration
Internal Switch Architecture Non-blocking
Package Type 324-contact HSBGA
Package Dimensions 19 mm x 19 mm
Terminal Count 324 terminals
Kiểu lắp đặt Surface mount
Package Shape Square
Ball Termination Ball

Hướng dẫn cấu hình chân PEX8614-BA50BC square

Cấu hình chân cho PEX8614-BA50BC (square gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.

Bảng cấu hình chân square cho PEX8614-BA50BC

Không có dữ liệu chân cụ thể sẵn có cho PEX8614-BA50BC.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

PEX8614-BA50BC phù hợp cho 6 Áp dụngs: PCIe Server Expansion, External Storage Appliances, Network Communication Equipment, High-Bandwidth Accelerator Platforms, PCIe Expansion Backplanes, Embedded PCIe Control Systems.

🖥️

PCIe Server Expansion

The PEX8614-BA50BC fits server expansion designs that need to consolidate multiple downstream PCI Express links behind a single switching point. Its 12-lane, 12-port organization provides substantial fan-out flexibility, while the non-blocking architecture supports full line-rate operation across configured ports. Broadcom documents a maximum packet cut-through latency of 140 ns in an x4-to-x1 arrangement, which is useful where accelerator, storage, and I/O traffic must traverse the switch without excessive protocol delay. The principal design challenge is the 324-contact HSBGA package: the PCB must provide controlled-impedance routing, low-return-loss transitions, dense power delivery, and effective thermal spreading around the device.

⚡

External Storage Appliances

PEX8614-BA50BC is applicable to external storage appliances that expose several PCIe paths for NVMe controllers, RAID engines, or accelerator cards. The 12-lane and 12-port architecture allows designers to create a structured switching fabric rather than connect every endpoint directly to a root complex. Packet cut-through behavior helps maintain low transaction latency, and Broadcom reports a maximum of 140 ns in an x4-to-x1 configuration. In a storage enclosure, system designers should still evaluate connector loss, cable or retimer behavior, reference-clock requirements, and the complete end-to-end PCIe channel rather than treating the switch specification as the entire link budget.

🌐

Network Communication Equipment

The PEX8614-BA50BC can support communication equipment architectures requiring multiple PCIe paths for network processors, packet processors, crypto engines, and line cards. Broadcom identifies low-latency communications as a principal use case for its packet cut-through switch architecture. With 12 lanes and 12 ports, the device offers considerable topology flexibility for modular systems, but the selected lane-to-port mapping must match the data-path requirements of each endpoint. Board implementation should prioritize low-loss differential routing, uninterrupted reference planes, controlled connector and package transitions, and decoupling close to the power pins to preserve signal integrity under full traffic load.

🏭

High-Bandwidth Accelerator Platforms

PEX8614-BA50BC is suitable for accelerator platforms that need multiple PCIe Gen 2 links for compute, fabric, or storage functions. Its non-blocking internal architecture supports full line-rate traffic on the configured ports, while packet cut-through reduces switching delay for latency-sensitive transactions. The 140 ns maximum cited by Broadcom applies specifically to an x4-to-x1 configuration, so system architects should evaluate the actual width conversion and traffic pattern rather than assume the same latency for every path. A 324-contact HSBGA footprint also demands careful escape routing, power-plane partitioning, thermal analysis, and assembly-process qualification.

🔧

PCIe Expansion Backplanes

The PEX8614-BA50BC fits expansion backplanes that distribute PCIe connectivity among pluggable cards, mezzanine modules, or rear-panel devices. The 12-lane, 12-port capability allows a single switching component to organize multiple links while retaining a non-blocking internal path. For backplane implementation, designers should model insertion loss through connectors, retimers, vias, and package transitions as one continuous channel. Maintain uninterrupted reference planes and symmetrical length matching on differential pairs, and use the Broadcom ball map and recommended power distribution to avoid signal-integrity degradation that could undermine the documented full line-rate capability.

🏭

Embedded PCIe Control Systems

PEX8614-BA50BC can be incorporated into embedded and industrial control systems that need to manage multiple PCIe endpoints such as storage, capture, networking, or modular instrumentation. The 12-port structure reduces the number of direct root-port connections required from the host controller and permits a more organized PCIe topology. Its low-latency packet forwarding is useful when control traffic shares the fabric with data traffic. The device remains a demanding board-level component because of its 324-contact HSBGA package, so designers must provide adequate power planes, carefully placed decoupling, high-quality substrate construction, and thermal paths that prevent localized junction heating during sustained line-rate traffic.

What is the Broadcom PEX8614-BA50BC?
The Broadcom PEX8614-BA50BC is a 12-lane, 12-port PCI Express Gen 2 switch IC in a 324-contact HSBGA package. Broadcom describes it as a non-blocking PCIe switch with full line-rate operation across its ports. According to the Broadcom PEX 8614 documentation, the architecture supports packet cut-through for low-latency communication and server applications.
What is the operating voltage of PEX8614-BA50BC?
The PEX8614-BA50BC supply-voltage specifications are not stated in the manufacturer material identified for this product. Use the Broadcom PEX 8614 datasheet rail table to determine the required core and I/O supply levels before designing the power tree. Do not infer a valid range from the PCIe generation or package designation.
How many PCIe lanes and ports does PEX8614-BA50BC provide?
The PEX8614-BA50BC provides 12 PCIe lanes and 12 ports. These figures identify the device as a multiport PCI Express Gen 2 switching IC rather than a simple endpoint controller. Broadcom's product documentation highlights the 12-lane, 12-port organization as the basis for flexible downstream-link expansion.
What package does PEX8614-BA50BC use?
The PEX8614-BA50BC uses a 324-contact HSBGA package measuring 19 mm by 19 mm. It is a square, surface-mount package with ball terminals. The Broadcom ordering and product listings identify the package as 324-HSBGA (19x19), which must be matched to the PCB land pattern and assembly process.
Where can I download the PEX8614-BA50BC datasheet PDF?
The Broadcom PEX 8614 documentation is available through the official Broadcom document portal linked on this page. It contains the manufacturer information needed to evaluate switching architecture, latency, application configuration, and implementation guidance. Use the manufacturer document revision associated with the production configuration when releasing the design.
Where can I find the PEX8614-BA50BC pinout and ball map?
The PEX8614-BA50BC ball map must be taken from the pin-assignment section of the current Broadcom PEX 8614 datasheet because the package contains 324 contacts. Do not infer signal assignments from lane or port numbering. The official Broadcom document portal provides the authoritative package drawing, ball locations, and signal descriptions for PCB layout.
What is the maximum latency of PEX8614-BA50BC?
Broadcom specifies a maximum packet cut-through latency of 140 ns in an x4-to-x1 configuration. The 140 ns figure applies to the documented arrangement and should not be treated as a configuration-independent guarantee. Wider, narrower, or otherwise different traffic paths require evaluation against the relevant application timing requirements.
Is PEX8614-BA50BC suitable for server and communication systems?
Yes, PEX8614-BA50BC is suitable for server and communication systems that require multiple PCIe links, full line-rate switching, and low-latency packet forwarding. Broadcom specifically identifies communications and servers as applications benefiting from the 140 ns maximum packet cut-through latency and non-blocking internal architecture.
PEX8614-BA50BC vs PEX8614-BA50BC-G - are they the same device?
PEX8614-BA50BC and PEX8614-BA50BC-G identify the same Broadcom PEX8614 configuration within differing listing or ordering formats. The product listings consistently describe a 12-lane, 12-port PCIe Gen 2 switch in a 324-HSBGA package. Verify the manufacturer ordering code and package suffix against the official datasheet before treating either notation as interchangeable.
When should I choose PEX8614-BA50BC over another PCIe switch?
Choose PEX8614-BA50BC when a design needs a 12-lane, 12-port PCIe Gen 2 switch with packet cut-through and a maximum documented latency of 140 ns in x4-to-x1 operation. Also confirm that the 324-contact HSBGA package is acceptable for the PCB, assembly, and thermal design. A switch with a different lane budget should be selected when those requirements cannot be met.
What can replace PEX8614-BA50BC?
A true drop-in replacement for PEX8614-BA50BC must match its 324-contact HSBGA land pattern, 12-lane and 12-port organization, PCI Express Gen 2 behavior, signaling, power rails, and package electrical characteristics. No independently verified cross-manufacturer drop-in replacement is identified for this exact ordering configuration. Request engineering review before considering a different switch, because a functional equivalent may require PCB changes.
What is the best Broadcom equivalent for PEX8614-BA50BC?
The closest identified Broadcom ordering representation is PEX8614-BA50BC-G, which points to the same 12-lane, 12-port PCIe Gen 2 switch and 324-HSBGA package. Confirm the exact ordering suffix, temperature grade, and production revision with Broadcom documentation. No other Broadcom device has been established as a verified pin-to-pin substitute.
Where can I buy PEX8614-BA50BC online?
Use the Request a Quote form on this page to request PEX8614-BA50BC pricing, availability, and lead time. The form allows the request to be matched to the exact Broadcom ordering code and 324-HSBGA package. This approach avoids confusion with similarly named PEX8614 listings that use different suffix formatting.
What is the price of PEX8614-BA50BC?
Current PEX8614-BA50BC pricing is not published in the structured manufacturer product record used for this page. Submit a quote request for the exact Broadcom MPN to obtain a current offer and quantity-break structure. Confirm the package suffix, assembly requirements, and shipment quantity when requesting the quotation.
What is the lead time and stock status of PEX8614-BA50BC?
Current stock and lead-time status for PEX8614-BA50BC must be obtained through the Request a Quote form on this page. The exact MPN is a 324-contact HSBGA device, so production planning should use a manufacturer-authorized supply channel and confirmed package configuration. Request a dated availability response before fixing the build schedule.

Dữ liệu tham khảo kỹ thuật cho PEX8614-BA50BC — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the PEX8614-BA50BC when a system needs a 12-lane, 12-port PCIe Gen 2 switching fabric with full line-rate operation and packet cut-through. It is particularly relevant to server, communication, storage-appliance, accelerator, and backplane designs that can accommodate a 324-contact HSBGA package and the associated high-speed PCB requirements. Broadcom specifies a maximum 140 ns packet cut-through latency in an x4-to-x1 configuration, but that value should be checked against the actual traffic path. Before choosing a substitute, require an exact 324-HSBGA land-pattern match and verify power rails, signaling, lane-to-port mapping, thermal limits, and production revisions. A different PCIe switch may offer a different port or lane count, but it is not automatically a drop-in replacement and can require board changes.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này
Brand Broadcom
Package 324-contact HSBGA (19 mm x 19 mm)
Product Type PCI Express switch IC
PCI Express Generation Gen 2
Lane Count 12 lanes
Port Count 12 ports
Maximum Packet Cut-Through Latency 140 ns in x4-to-x1 configuration
Internal Architecture Non-blocking
Terminal Count 324 terminals

Ghi chú thiết kế

Treat the complete PCIe path as one controlled-impedance channel, including host traces, package transitions, connectors, retimers, and test points. Use the Broadcom ball map and reference design recommendations to define layer transitions and via geometry. Avoid stubs and unnecessary layer changes on high-speed differential pairs, maintain continuous reference planes, and validate insertion loss and return loss against the selected Gen 2 link budget.

Plan the power tree from the current Broadcom PEX 8614 documentation before assigning rail capacitance or regulator selection. Place required bulk and high-frequency decoupling close to the appropriate HSBGA power and ground balls, while minimizing loop area between supply and return connections. Validate steady-state and transient voltage at the package under full line-rate traffic because the dense 324-contact package can demand carefully coordinated power delivery across multiple balls.

Provide a low-resistance thermal path through the board rather than relying only on signal-layer escape routing. Analyze power dissipation in the selected lane and port configuration, estimate junction temperature with the manufacturer's thermal model, and reserve uninterrupted copper beneath the HSBGA where the land pattern permits. Consider a heat-spreader or heat-sink solution when operating temperature margin is insufficient. Thermal design should be completed with the exact package and board stack-up selected for production.

Use the manufacturer ball-assignment drawing as the controlling source for signal routing and power connections; lane numbers and port names alone are insufficient for a 324-contact package. Arrange escape routing to avoid crossings between adjacent high-speed groups, preserve symmetric differential geometry, and separate noisy or switching-supply paths from sensitive receiver references. Have the layout reviewed against the official reference design and independent signal-integrity simulation before fabrication.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The identified Broadcom product documentation and distributor snippets do not state the requested compliance or material-declaration statuses. Check the current manufacturer product declaration and assembly documentation before release.

Dữ liệu được xác minh vào: 2026-11-11 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

PEX8614-BA50BC datasheet PEX8614-BA50BC datasheet pdf PEX8614-BA50BC pinout PEX8614-BA50BC specifications PEX8614-BA50BC equivalent PEX8614-BA50BC replacement PEX8614-BA50BC cross reference Broadcom PEX8614-BA50BC PEX8614-BA50BC 12 port PCIe switch PEX8614-BA50BC 324 HSBGA PEX8614-BA50BC server expansion PEX8614-BA50BC price

Các bộ phận và thuật ngữ liên quan

Broadcom PEX8614-BA50BC PCI Express switch PCIe switch PCI Interface IC interface semiconductor PCI Express Gen 2 12-lane PCIe 12-port PCIe packet cut-through non-blocking switch architecture 140 ns latency 324-contact HSBGA 19 mm by 19 mm package ball-grid array surface-mount package PCIe server expansion external storage appliance network communication equipment accelerator platform PCIe expansion backplane high-speed differential routing controlled impedance full line-rate operation
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ