Microchip Technology

PIC24FJ32GU202-I/SS - 32MHz 16-Bit USB MCU | Microchip

MPN: PIC24FJ32GU202-I/SS ✓ Aktif
2 V to 3.6 V Vdss Down to a few hundred nA Id 28 pins Package 32 MHz Speed 32 KB ECC Flash (11K x 24 bits) Memory
MOQ: 1 |

PIC24FJ32GU202-I/SS Genel Bakış

The Microchip Technology PIC24FJ32GU202-I/SS is a 16-bit PIC24 microcontroller with a 32 MHz operating frequency, 32 KB of ECC Flash program memory, and 8 KB of RAM, housed in a 28-pin SSOP package. The device operates from 2 V to 3.6 V, provides 20 general-purpose I/O pins, and includes Full Speed USB 2.0 Host, Device, and OTG support. It is designed for low-power embedded systems that require USB connectivity, moderate processing performance, and compact surface-mount packaging.

A microcontroller is a programmable integrated circuit that combines a CPU core, nonvolatile program memory, volatile data memory, and peripherals on one semiconductor device. The PIC24FJ32GU202 belongs to the PIC24FJ family of 16-bit RISC microcontrollers and sits within the broader embedded-controller and semiconductor hierarchy. Its core-independent peripherals allow selected communications, timing, and control functions to operate without continuous CPU intervention, supporting deterministic and energy-efficient system behavior.

Three headline capabilities distinguish this device. First, the 32 MHz PIC24 core supports a listed 16 MIPS execution rate, providing ample control bandwidth for protocol handling and mixed-signal systems. Second, 32 KB of ECC Flash protects stored firmware against memory errors, while 8 KB of SRAM supports working data and buffering. Third, integrated Full Speed USB 2.0 removes the need for an external USB controller when the design requires host, device, or OTG connectivity.

The PIC24FJ architecture also includes core-independent peripherals, programmable on-chip timers, and communication interfaces including I2C, SPI, and UART. An on-chip 10-bit ADC supports measurements from analog sensors and potentiometers. XLP low-power operation and sleep current measured in the hundreds of nanoseconds help conserve energy in battery-operated or duty-cycled products. The manufacturer describes the family as combining these USB capabilities with low-power peripherals for embedded and portable designs.

Typical uses include USB-connected data loggers, portable measurement instruments, industrial control modules, compact human-interface devices, and sensor nodes with USB synchronization. The 28-pin SSOP footprint is useful where a through-hole-style lead spacing is preferred for assembly or inspection, although it occupies more board area than a comparable QFN package. Firmware, pin multiplexing, USB implementation, and peripheral assignments should be verified against the manufacturer's pin-description table before PCB routing.

For a new design, begin with the manufacturer's device pin table and USB reference circuitry, then budget decoupling capacitors directly beside the power pins. USB routing must follow the layout guidance in the manufacturer documentation to preserve signal integrity. Confirm the 2 V to 3.6 V operating range against every attached peripheral, and select external interface protection if the connector is exposed to user-accessible cables or industrial transients.

This page consolidates the device's memory capacity, clock rate, USB capability, package constraints, drop-in family alternatives, and practical design guidance. It also distinguishes verified drop-in options from functional alternatives that require different packages, firmware support, or PCB redesigns.

Drop-in alternatifler için PIC24FJ32GU202-I/SS — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller PIC24FJ32GU202-I/SS (aynı form faktörü ve ayağa oturma) — farklı olan Operating Temperature, Package, ADC, Core Architecture, Sleep Current.

Microchip Technology
Operating Temperature: -40C to +85C (Industrial, 'I' suffix)
Package: 28-pin SSOP (5.30 mm body)
ADC: 10-bit, 1.1 Msps (per family datasheet)
Microchip Technology
Operating Temperature: -40C to +125C (E-temp)
Package: 28-pin SSOP
Core Architecture: PIC24F (16-bit modified Harvard)
Microchip Technology
Operating Temperature: -40 °C to +85 °C (Industrial, "I")
Package: 28-pin SSOP ("/SS")
ADC: 10-bit
Microchip Technology
Operating Temperature: -40 C to +85 C (industrial, "I" grade)
Package: 28-pin SSOP (5.30 mm body)
ADC: 9-channel, 12-bit

PIC24FJ32GU202-E/SS

✅ Yerleştirme
Microchip Technology
📦 28-pin SSOP
PIC24F (16-bit modified Harvard) · 16 MIPS at 32 MHz · 32 KB (11K x 24) Flash with ECC · 8 KB · 2 V to 3.6 V · -40C to +125C (E-temp) · 28-pin SSOP · 20

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

PIC24FJ32GU202/SS

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 28-pin SSOP
Same 32 MHz, 32 KB ECC Flash, 8 KB RAM, USB, and 28-pin SSOP configuration; the temperature grade differs from I/SS.

📋 Katalogda Olmayan Referans Alternatifi

PIC24FJ64GU202-I/SS

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
Microchip Technology
📦 28-pin SSOP
PIC24F · PIC · 16-bit · 32 MHz (16 MIPS) · 64 KB (22K x 24) Flash with ECC · 8 KB · 2.0 V to 3.6 V · USB 2.0 Full-Speed Host/Device/OTG with on-chip transceiver

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

PIC24FJ64GU202/SS

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 28-pin SSOP
Same 32 MHz architecture, USB configuration, and 28-pin SSOP footprint; Flash increases from 32 KB to 64 KB and temperature grade differs from I/SS.

📋 Katalogda Olmayan Referans Alternatifi

PIC24FJ32GU202-E/M4

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 28-pin SSOP
Same 32 MHz, 32 KB ECC Flash, 8 KB RAM, and USB configuration; the E/M4 temperature grade differs from the I/SS industrial grade.

📋 Katalogda Olmayan Referans Alternatifi

PIC24FJ32GU202-I/SS Maksimum Değerlendirmeler & Elektriksel Özellikler

CPU Architecture 16-bit PIC24 RISC
Maximum CPU Frequency 32 MHz
Instruction Throughput 16 MIPS
Program Memory 32 KB ECC Flash (11K x 24 bits)
Data Memory 8 KB SRAM
İşletim Besleme Gerilimi 2 V to 3.6 V
General-Purpose I/O Pins 20 pins
Total Package Pins 28 pins
USB Interface Full Speed USB 2.0 Host/Device/OTG
Low-Power Technology XLP
Sleep Current Down to a few hundred nA
ADC Resolution 10 bits
Serial Interfaces I2C, SPI, and UART
Package Type 28-pin SSOP
Montaj Türü Surface mount
Industrial Temperature Grade -40°C to +85°C

PIC24FJ32GU202-I/SS 28-pin ssop Pin Yapısı Kılavuzu

PIC24FJ32GU202-I/SS (28-pin ssop paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.

28-pin ssop paket pin çizelgesi için PIC24FJ32GU202-I/SS

Ayrıntılı pin çıkış verisi mevcut değil: PIC24FJ32GU202-I/SS.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

PIC24FJ32GU202-I/SS için uygundur 6 uygulamas: USB Connected Data Logger, Portable Environmental Sensor, Industrial Control Module, USB Human Interface Device, Battery Powered Measurement Instrument, USB Service and Configuration Tool.

🖥️

USB Connected Data Logger

The PIC24FJ32GU202-I/SS fits a compact USB data logger because it combines a 32 MHz, 16-bit processor with 32 KB of ECC Flash and 8 KB of SRAM. Its integrated Full Speed USB 2.0 controller can connect directly as a USB device, removing a separate host controller and reducing board area. The 20 I/O pins support sensors, digital inputs, and status indicators, while the 16 MIPS execution rate accommodates sampling coordination and packet preparation. USB data must remain within Full Speed bandwidth limits, and bulk storage should use external nonvolatile memory when the 32 KB internal Flash is insufficient.

🧩

Portable Environmental Sensor

The PIC24FJ32GU202-I/SS is appropriate for a portable environmental sensor that combines analog measurements with periodic USB synchronization. Its 10-bit ADC can read resistive sensors, while the I2C and SPI interfaces support digital sensors and external memory. The 32 MHz core provides capacity for calibration, filtering, and data formatting without requiring a higher-power processor. XLP low-power operation and sleep current down to a few hundred nA make the device useful in battery-powered products, provided the designer accounts for sensor and regulator consumption in the total active-to-sleep duty cycle.

🏭

Industrial Control Module

The PIC24FJ32GU202-I/SS can serve as the controller in a compact industrial module that accepts digital commands and drives sensors over I2C, SPI, or UART. Its 16-bit architecture and 16 MIPS operating rate provide adequate throughput for deterministic control loops, while ECC Flash improves the integrity of stored firmware. The 28-pin SSOP package has widely separated leads, which can simplify inspection and assembly compared with a fine-pitch QFN. For an industrial enclosure, add appropriate transient protection and verify that the chosen -I/SS temperature grade covers the complete environmental range.

🔧

USB Human Interface Device

The PIC24FJ32GU202-I/SS supports USB-connected keyboards, control panels, and configuration interfaces where a full host operating system would be unnecessary. The integrated USB device controller provides a direct connection to a computer, while programmable timers, UART, and GPIO support buttons, displays, indicators, and external interfaces. At 32 MHz and 16 MIPS, the core can handle USB enumeration and interactive control logic. Designers should use the manufacturer's USB reference design and pin-muxing tables to ensure the correct peripheral instance and alternate functions are assigned.

📱

Battery Powered Measurement Instrument

The PIC24FJ32GU202-I/SS is well suited to a battery-powered measurement instrument that must combine low standby consumption with flexible communications. XLP sleep modes reduce current when measurements are not active, while the 32 MHz core wakes quickly for timed acquisition and signal processing. I2C and SPI can connect to precision converters or sensors, and UART can communicate with a host. The 8 KB SRAM provides working space for buffering, while 32 KB ECC Flash holds firmware and configuration data. A low-leakage regulator and carefully controlled peripheral states are necessary to realize the family's low sleep-current benefit at system level.

⚡

USB Service and Configuration Tool

The PIC24FJ32GU202-I/SS can implement a USB service interface for firmware loading, configuration exchange, diagnostics, and field upgrades. Its ECC Flash protects stored program data, while the 32 MHz processor can execute communication routines alongside background control functions. The USB OTG capability enables product-to-product workflows in suitable designs, although host and OTG implementation still requires the correct external transceiver and connector arrangement specified by Microchip. A robust design should include firmware version identification, access control, brownout handling, and recovery provisions for interrupted programming operations.

Önerilen Ürünler Özeti

PIC24FJ32GU202-I/M4 Same MCU family with a different package option Kullanıldığı Yer: USB Connected Data Logger, Portable Environmental Sensor, Industrial Control Module, USB Service and Configuration Tool PIC24FJ32GU202-I/M5 Same MCU family with a compact package option Kullanıldığı Yer: USB Connected Data Logger, Industrial Control Module, USB Human Interface Device, USB Service and Configuration Tool PIC24FJ32GU202-E/SS Microchip Technology Kullanıldığı Yer: Portable Environmental Sensor, USB Human Interface Device, Battery Powered Measurement Instrument PIC24FJ32GU202/SS Same MCU family with a different temperature grade Kullanıldığı Yer: Battery Powered Measurement Instrument
What are the key specifications of PIC24FJ32GU202-I/SS that engineers should know?
The PIC24FJ32GU202-I/SS combines a 32 MHz 16-bit PIC24 RISC core, 32 KB of ECC Flash, 8 KB of SRAM, and Full Speed USB 2.0 connectivity in a 28-pin SSOP. According to the Microchip Technology PIC24FJ32GU202 product documentation, the device supports 20 I/O pins and operates from 2 V to 3.6 V. Its listed 16 MIPS execution rate provides ample performance for USB data acquisition, embedded control, and portable instrumentation, while XLP low-power features support duty-cycled battery-powered designs.
Where can I download the PIC24FJ32GU202-I/SS datasheet PDF?
The primary technical documents are available through the official Microchip Technology PIC24FJ32GU202 product page at https://www.microchip.com/en-us/product/PIC24FJ32GU202. Select the datasheet, pinout, and programming or reference documentation for the PIC24FJ32GU202 family. The manufacturer datasheet is the controlling source for electrical limits, pin multiplexing, USB implementation, and package drawings. A third-party PDF can aid review, but firmware engineers should verify device revisions and application details against Microchip's current documentation.
Where can I find the PIC24FJ32GU202-I/SS pinout?
The PIC24FJ32GU202-I/SS pinout is found in the pin-description table and package drawing in the Microchip Technology PIC24FJ32GU202 documentation. This industrial-temperature variant uses the 28-pin SSOP configuration and exposes 20 general-purpose I/O positions, with additional pins assigned to power, ground, programming, reset, and USB functions. Use the manufacturer pin table when assigning PCB nets because several pins support multiple peripheral functions through programmable multiplexing and configuration locks.
Is PIC24FJ32GU202-I/SS suitable for USB data-logging applications?
The PIC24FJ32GU202-I/SS is suitable for USB data-logging applications that need a 16-bit control processor, 32 KB of ECC Flash, 8 KB of SRAM, and integrated USB. According to the Microchip Technology family documentation, the USB controller supports Full Speed Host, Device, and OTG operating modes. Its 16 MIPS rate can manage buffering and control tasks, but sustained logging bandwidth must remain within the USB Full Speed limit and the available SRAM or external storage strategy.
What is the difference between PIC24FJ32GU202-I/SS and PIC24FJ32GU202-I/M4?
The primary difference is the physical package: the PIC24FJ32GU202-I/SS uses a 28-pin SSOP, while the PIC24FJ32GU202-I/M4 uses a different 28-pin package option. Both belong to the same PIC24FJ32GU202 family and are listed with a 32 MHz, 16-bit architecture, 32 KB ECC Flash, 8 KB RAM, USB, and XLP capability. They are therefore not interchangeable without confirming the footprint, dimensions, lead pitch, and PCB land pattern in the manufacturer package drawings.
When should I choose PIC24FJ32GU202-I/SS over PIC24FJ32GU202-I/M5?
Choose the PIC24FJ32GU202-I/SS when a 28-pin SSOP footprint is required and the PCB can accommodate that package. Choose the PIC24FJ32GU202-I/M5 when its corresponding package offers a more compact footprint and the board layout supports it. Both parts represent the same PIC24FJ32GU202 performance family with 32 MHz operation, 32 KB ECC Flash, 8 KB SRAM, and USB support, so package dimensions and assembly capability should drive the decision rather than core processing requirements.
What can replace PIC24FJ32GU202-I/SS?
The closest drop-in replacement is a PIC24FJ32GU202 variant using the same 28-pin SSOP footprint and matching electrical function set. The PIC24FJ32GU202-E/SS shares the package and core configuration, while the non-industrial PIC24FJ32GU202/SS changes the temperature grade. PIC24FJ32GU202-I/M4 and PIC24FJ32GU202-I/M5 are not drop-in replacements because their package codes identify different physical packages. Confirm pin mapping, temperature range, and PCB compatibility before substituting any part.
What is the best Microchip equivalent for PIC24FJ32GU202-I/SS?
The best direct Microchip equivalent depends on which constraints must remain unchanged. A PIC24FJ32GU202 variant in the same 28-pin SSOP package is preferred because it preserves the footprint and peripheral architecture. If a different package can be accepted, the PIC24FJ32GU202-I/M4 and PIC24FJ32GU202-I/M5 provide additional board-layout options with the same 32 MHz, 32 KB ECC Flash, and 8 KB SRAM family platform. A cross-manufacturer equivalent would require validation of USB behavior, pin multiplexing, firmware support, and timing.
Is PIC24FJ32GU202-I/SS the same as PIC24FJ32GU202-I/M5?
No. The PIC24FJ32GU202-I/SS and PIC24FJ32GU202-I/M5 are related family members but use different package codes, so they are not automatically pin-to-pin drop-in equivalents. Both are identified as 16-bit, 32 MHz PIC24FJ32GU202 devices with 32 KB ECC Flash, 8 KB RAM, USB, and XLP. The deciding factor is the physical package and its land pattern. Use the package drawings and pin tables before treating either device as a replacement for the other.
Where can I buy PIC24FJ32GU202-I/SS online?
Use the Request a Quote form on this page to request PIC24FJ32GU202-I/SS availability, current lead time, and order handling. The form is the appropriate channel for quote-based purchasing and avoids stale inventory information. When requesting a quote, include the required quantity, target reel or tube format, and any date-code or traceability requirements so the exact industrial-temperature, 28-pin SSOP ordering code can be confirmed.
What is the price of PIC24FJ32GU202-I/SS?
Use the Request a Quote form on this page for the current PIC24FJ32GU202-I/SS price and volume pricing. Pricing depends on quantity, packaging format, stock position, and required traceability, so a static figure can become outdated. The quote request should carry the complete MPN, including the -I/SS industrial-temperature and package suffix, to prevent a listing for a different package or grade from being selected.
What is the lead time for PIC24FJ32GU202-I/SS?
Submit a Request a Quote on this page with the required quantity and packaging preference to obtain the current lead time for PIC24FJ32GU202-I/SS. Availability can change with factory inventory and procurement volume, so confirm the production status and delivery schedule in the quotation. The request should specify whether the shipment must be in tape-and-reel, tube, or another approved packing format and should identify any date-code constraints.
Is PIC24FJ32GU202-I/SS in stock?
Current stock for PIC24FJ32GU202-I/SS should be confirmed through the Request a Quote form on this page. The form allows the required quantity and desired delivery schedule to be reviewed against current inventory and supply status. A distributor search result alone does not guarantee that the exact -I/SS ordering code is immediately available, so use the quote confirmation as the procurement decision point.
How much power does PIC24FJ32GU202-I/SS consume in low-power operation?
The PIC24FJ32GU202-I/SS is designed for XLP operation, and Microchip Technology describes sleep current in the family down to a few hundred nA. Actual board-level consumption depends on the active peripheral set, operating frequency, USB state, leakage, and the selected regulator. For battery designs, calculate the complete sleep and active duty cycle rather than relying only on the minimum sleep figure, and confirm the actual current with the manufacturer operating modes and the finished board.
What peripherals are integrated into PIC24FJ32GU202-I/SS?
The PIC24FJ32GU202-I/SS integrates a 16-bit PIC24 core, 32 KB ECC Flash, 8 KB SRAM, Full Speed USB 2.0 Host/Device/OTG, a 10-bit ADC, I2C, SPI, UART, programmable timers, and core-independent peripherals. According to the Microchip Technology PIC24FJ family documentation, the core-independent peripherals can perform selected tasks outside the main CPU, helping reduce processing load and support low-power designs. Pin assignment depends on the package and configuration settings.
How should USB and decoupling be routed on a PIC24FJ32GU202-I/SS PCB?
Place the required bypass capacitors as close as practical to the device power pins, and route USB D+ and D- as a short, continuous, impedance-controlled pair on the same PCB layer. The Microchip Technology USB hardware and layout documentation should govern trace geometry, return paths, connector placement, and protection components. Avoid splitting the pair around other circuitry, keep test points balanced, and follow the recommended separation from noisy switching nodes to reduce data-integrity risk.

Mühendislik referans verileri: PIC24FJ32GU202-I/SS — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the PIC24FJ32GU202-I/SS when the design needs a 28-pin SSOP footprint, industrial temperature grade, 32 MHz PIC24 processing, 32 KB ECC Flash, 8 KB SRAM, and integrated Full Speed USB. PIC24FJ32GU202-E/SS is a direct package-compatible alternative when its temperature grade satisfies the application. PIC24FJ32GU202/SS is useful when the industrial-grade requirement is unnecessary, while PIC24FJ64GU202-I/SS is preferable when the same footprint must support twice the Flash capacity. PIC24FJ32GU202-E/M4 may suit assemblies using the corresponding M4 package. Do not treat the M4, M5, SO, or QFN options as drop-in replacements merely because they share the PIC24FJ32GU202 base name. Confirm the package drawing, pin table, USB implementation, temperature range, programming interface, and PCB land pattern before finalizing a substitution.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün PIC24FJ32GU202-E/SS PIC24FJ32GU202/SS PIC24FJ64GU202-I/SS PIC24FJ64GU202/SS PIC24FJ32GU202-E/M4
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP
CPU Frequency 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz
CPU Architecture 16-bit PIC24 RISC 16-bit PIC24 RISC 16-bit PIC24 RISC 16-bit PIC24 RISC 16-bit PIC24 RISC 16-bit PIC24 RISC
Program Memory 32 KB ECC Flash (11K x 24 bits) 32 KB ECC Flash 32 KB ECC Flash 64 KB ECC Flash 64 KB ECC Flash 32 KB ECC Flash
Data Memory 8 KB SRAM 8 KB SRAM 8 KB SRAM 8 KB SRAM 8 KB SRAM 8 KB SRAM
USB Interface Full Speed USB 2.0 Host/Device/OTG Full Speed USB 2.0 Host/Device/OTG Full Speed USB 2.0 Host/Device/OTG Full Speed USB 2.0 Host/Device/OTG Full Speed USB 2.0 Host/Device/OTG Full Speed USB 2.0 Host/Device/OTG
Operating Voltage 2 V to 3.6 V 2 V to 3.6 V 2 V to 3.6 V 2 V to 3.6 V 2 V to 3.6 V 2 V to 3.6 V
Low-Power Feature XLP with sleep current down to a few hundred nA XLP XLP XLP XLP XLP

Ana Farklılayıcılar

  • Direct Full Speed USB integration in the 28-pin SSOP footprint (karşılaştırma:PIC24FJ32GU202-I/M5)
  • Industrial-grade ordering option (karşılaştırma:PIC24FJ32GU202/SS)
  • More nonvolatile memory is available within the same family and footprint (karşılaştırma:PIC24FJ32GU202-I/SS)

Tasarım Notları

Place all required bypass capacitors directly beside the corresponding power and ground pins, with the shortest practical return path. The 2 V to 3.6 V operating range does not remove the need for careful supply-noise control because USB transceiver activity and digital switching can disturb analog measurements. Route sensitive ADC inputs away from USB D+ and D-, clock signals, and high-current switching paths. Use the manufacturer layout guidance to preserve USB impedance and minimize unwanted coupling.

Route USB D+ and D- as a closely coupled, balanced pair on a continuous reference plane, avoiding plane changes, stubs, and splits beneath the pair. Keep the pair length matched according to the Microchip Technology USB hardware design guidance and place connector-side protection close to the entry point. If the product uses a separate USB transceiver, follow the specified transceiver data-sheet layout rather than treating the MCU USB pins as a generic high-speed interface.

The MCU can enter very low-current sleep states, but system power depends on every attached peripheral and the selected regulator. Estimated power planning should use the MCU operating-mode currents from the manufacturer datasheet together with sensor, USB-transceiver, pull-up, and regulator leakage values. Disable unused peripherals and GPIO outputs before sleep, and confirm that the regulator can start quickly enough for the application's wake-up interval without exceeding the brownout limits.

Do not substitute an M4, M5, SO, or QFN package code solely because the base device name is identical. The ordering suffix defines the physical package, lead dimensions, and land pattern. Likewise, confirm the temperature grade when using E/SS or the non-suffixed variant in place of I/SS. After substitution, verify pin multiplexing, programming and debug connections, USB support, supply limits, and the exposed pad requirements against the applicable package drawing.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

Compliance declarations are not stated in the available product records. AEC-Q100 is not applicable because this is an industrial microcontroller rather than an automotive-qualified device.

İlgili Aramalar

PIC24FJ32GU202-I/SS PIC24FJ32GU202-I/SS datasheet PIC24FJ32GU202-I/SS datasheet pdf PIC24FJ32GU202-I/SS pinout PIC24FJ32GU202-I/SS replacement PIC24FJ32GU202-I/SS equivalent PIC24FJ32GU202-I/SS price PIC24FJ32GU202-I/SS stock PIC24FJ32GU202 28 SSOP PIC24FJ32GU202 USB application circuit PIC24FJ32GU202-I/SS vs PIC24FJ32GU202-E/SS Microchip PIC24FJ32GU202

İlgili Bileşenler ve Terimler

Microchip Technology PIC24FJ32GU202-I/SS PIC24FJ32GU202 PIC24FJ32GU202-E/SS PIC24FJ64GU202-I/SS PIC24FJ32GU202-I/M4 PIC24FJ32GU202-I/M5 PIC24FJ32GU202 family PIC24 core 16-bit RISC microcontroller embedded microcontroller semiconductor Full Speed USB 2.0 USB Host USB Device USB OTG ECC Flash SRAM XLP low-power technology core-independent peripheral 10-bit ADC I2C SPI UART 28-pin SSOP SSOP package family surface-mount package industrial temperature grade
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle