PIC24FJ32GU202-I/SS - 32MHz 16-Bit USB MCU | Microchip
MPN: PIC24FJ32GU202-I/SS ✓ فعالPIC24FJ32GU202-I/SS نمای کلی
A microcontroller is a programmable integrated circuit that combines a CPU core, nonvolatile program memory, volatile data memory, and peripherals on one semiconductor device. The PIC24FJ32GU202 belongs to the PIC24FJ family of 16-bit RISC microcontrollers and sits within the broader embedded-controller and semiconductor hierarchy. Its core-independent peripherals allow selected communications, timing, and control functions to operate without continuous CPU intervention, supporting deterministic and energy-efficient system behavior.
Three headline capabilities distinguish this device. First, the 32 MHz PIC24 core supports a listed 16 MIPS execution rate, providing ample control bandwidth for protocol handling and mixed-signal systems. Second, 32 KB of ECC Flash protects stored firmware against memory errors, while 8 KB of SRAM supports working data and buffering. Third, integrated Full Speed USB 2.0 removes the need for an external USB controller when the design requires host, device, or OTG connectivity.
The PIC24FJ architecture also includes core-independent peripherals, programmable on-chip timers, and communication interfaces including I2C, SPI, and UART. An on-chip 10-bit ADC supports measurements from analog sensors and potentiometers. XLP low-power operation and sleep current measured in the hundreds of nanoseconds help conserve energy in battery-operated or duty-cycled products. The manufacturer describes the family as combining these USB capabilities with low-power peripherals for embedded and portable designs.
Typical uses include USB-connected data loggers, portable measurement instruments, industrial control modules, compact human-interface devices, and sensor nodes with USB synchronization. The 28-pin SSOP footprint is useful where a through-hole-style lead spacing is preferred for assembly or inspection, although it occupies more board area than a comparable QFN package. Firmware, pin multiplexing, USB implementation, and peripheral assignments should be verified against the manufacturer's pin-description table before PCB routing.
For a new design, begin with the manufacturer's device pin table and USB reference circuitry, then budget decoupling capacitors directly beside the power pins. USB routing must follow the layout guidance in the manufacturer documentation to preserve signal integrity. Confirm the 2 V to 3.6 V operating range against every attached peripheral, and select external interface protection if the connector is exposed to user-accessible cables or industrial transients.
This page consolidates the device's memory capacity, clock rate, USB capability, package constraints, drop-in family alternatives, and practical design guidance. It also distinguishes verified drop-in options from functional alternatives that require different packages, firmware support, or PCB redesigns.
جایگزینهای drop-in برای PIC24FJ32GU202-I/SS — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای PIC24FJ32GU202-I/SS (همان فرمفاکتور و فوتپرینت) — متفاوت در Operating Temperature, Package, ADC, Core Architecture, Sleep Current.
PIC24FJ32GU202-E/SS
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC24FJ32GU202/SS
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
PIC24FJ64GU202-I/SS
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشدهبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←PIC24FJ64GU202/SS
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
PIC24FJ32GU202-E/M4
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
PIC24FJ32GU202-I/SS حداکثر مقادیر مجاز و مشخصات الکتریکی
| CPU Architecture | 16-bit PIC24 RISC |
| Maximum CPU Frequency | 32 MHz |
| Instruction Throughput | 16 MIPS |
| Program Memory | 32 KB ECC Flash (11K x 24 bits) |
| Data Memory | 8 KB SRAM |
| ولتاژ تغذیه کاری | 2 V to 3.6 V |
| General-Purpose I/O Pins | 20 pins |
| Total Package Pins | 28 pins |
| USB Interface | Full Speed USB 2.0 Host/Device/OTG |
| Low-Power Technology | XLP |
| Sleep Current | Down to a few hundred nA |
| ADC Resolution | 10 bits |
| Serial Interfaces | I2C, SPI, and UART |
| Package Type | 28-pin SSOP |
| نوع نصب | Surface mount |
| Industrial Temperature Grade | -40°C to +85°C |
راهنمای پیکربندی پین PIC24FJ32GU202-I/SS 28-pin ssop
پیکربندی پین برای PIC24FJ32GU202-I/SS (پکیج 28-pin ssop). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای PIC24FJ32GU202-I/SS.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
PIC24FJ32GU202-I/SS مناسب است برای 6 کاربردs: USB Connected Data Logger, Portable Environmental Sensor, Industrial Control Module, USB Human Interface Device, Battery Powered Measurement Instrument, USB Service and Configuration Tool.
USB Connected Data Logger
The PIC24FJ32GU202-I/SS fits a compact USB data logger because it combines a 32 MHz, 16-bit processor with 32 KB of ECC Flash and 8 KB of SRAM. Its integrated Full Speed USB 2.0 controller can connect directly as a USB device, removing a separate host controller and reducing board area. The 20 I/O pins support sensors, digital inputs, and status indicators, while the 16 MIPS execution rate accommodates sampling coordination and packet preparation. USB data must remain within Full Speed bandwidth limits, and bulk storage should use external nonvolatile memory when the 32 KB internal Flash is insufficient.
پیشنهادی
Portable Environmental Sensor
The PIC24FJ32GU202-I/SS is appropriate for a portable environmental sensor that combines analog measurements with periodic USB synchronization. Its 10-bit ADC can read resistive sensors, while the I2C and SPI interfaces support digital sensors and external memory. The 32 MHz core provides capacity for calibration, filtering, and data formatting without requiring a higher-power processor. XLP low-power operation and sleep current down to a few hundred nA make the device useful in battery-powered products, provided the designer accounts for sensor and regulator consumption in the total active-to-sleep duty cycle.
پیشنهادی
Industrial Control Module
The PIC24FJ32GU202-I/SS can serve as the controller in a compact industrial module that accepts digital commands and drives sensors over I2C, SPI, or UART. Its 16-bit architecture and 16 MIPS operating rate provide adequate throughput for deterministic control loops, while ECC Flash improves the integrity of stored firmware. The 28-pin SSOP package has widely separated leads, which can simplify inspection and assembly compared with a fine-pitch QFN. For an industrial enclosure, add appropriate transient protection and verify that the chosen -I/SS temperature grade covers the complete environmental range.
پیشنهادی
USB Human Interface Device
The PIC24FJ32GU202-I/SS supports USB-connected keyboards, control panels, and configuration interfaces where a full host operating system would be unnecessary. The integrated USB device controller provides a direct connection to a computer, while programmable timers, UART, and GPIO support buttons, displays, indicators, and external interfaces. At 32 MHz and 16 MIPS, the core can handle USB enumeration and interactive control logic. Designers should use the manufacturer's USB reference design and pin-muxing tables to ensure the correct peripheral instance and alternate functions are assigned.
پیشنهادی
Battery Powered Measurement Instrument
The PIC24FJ32GU202-I/SS is well suited to a battery-powered measurement instrument that must combine low standby consumption with flexible communications. XLP sleep modes reduce current when measurements are not active, while the 32 MHz core wakes quickly for timed acquisition and signal processing. I2C and SPI can connect to precision converters or sensors, and UART can communicate with a host. The 8 KB SRAM provides working space for buffering, while 32 KB ECC Flash holds firmware and configuration data. A low-leakage regulator and carefully controlled peripheral states are necessary to realize the family's low sleep-current benefit at system level.
پیشنهادی
USB Service and Configuration Tool
The PIC24FJ32GU202-I/SS can implement a USB service interface for firmware loading, configuration exchange, diagnostics, and field upgrades. Its ECC Flash protects stored program data, while the 32 MHz processor can execute communication routines alongside background control functions. The USB OTG capability enables product-to-product workflows in suitable designs, although host and OTG implementation still requires the correct external transceiver and connector arrangement specified by Microchip. A robust design should include firmware version identification, access control, brownout handling, and recovery provisions for interrupted programming operations.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای PIC24FJ32GU202-I/SS — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | PIC24FJ32GU202-E/SS | PIC24FJ32GU202/SS | PIC24FJ64GU202-I/SS | PIC24FJ64GU202/SS | PIC24FJ32GU202-E/M4 |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-pin SSOP | 28-pin SSOP | 28-pin SSOP | 28-pin SSOP | 28-pin SSOP | 28-pin SSOP |
| CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| CPU Architecture | 16-bit PIC24 RISC | 16-bit PIC24 RISC | 16-bit PIC24 RISC | 16-bit PIC24 RISC | 16-bit PIC24 RISC | 16-bit PIC24 RISC |
| Program Memory | 32 KB ECC Flash (11K x 24 bits) | 32 KB ECC Flash | 32 KB ECC Flash | 64 KB ECC Flash | 64 KB ECC Flash | 32 KB ECC Flash |
| Data Memory | 8 KB SRAM | 8 KB SRAM | 8 KB SRAM | 8 KB SRAM | 8 KB SRAM | 8 KB SRAM |
| USB Interface | Full Speed USB 2.0 Host/Device/OTG | Full Speed USB 2.0 Host/Device/OTG | Full Speed USB 2.0 Host/Device/OTG | Full Speed USB 2.0 Host/Device/OTG | Full Speed USB 2.0 Host/Device/OTG | Full Speed USB 2.0 Host/Device/OTG |
| Operating Voltage | 2 V to 3.6 V | 2 V to 3.6 V | 2 V to 3.6 V | 2 V to 3.6 V | 2 V to 3.6 V | 2 V to 3.6 V |
| Low-Power Feature | XLP with sleep current down to a few hundred nA | XLP | XLP | XLP | XLP | XLP |
تفاوتهای کلیدی
- Direct Full Speed USB integration in the 28-pin SSOP footprint (در مقابلPIC24FJ32GU202-I/M5)
- Industrial-grade ordering option (در مقابلPIC24FJ32GU202/SS)
- More nonvolatile memory is available within the same family and footprint (در مقابلPIC24FJ32GU202-I/SS)
یادداشتهای طراحی
Place all required bypass capacitors directly beside the corresponding power and ground pins, with the shortest practical return path. The 2 V to 3.6 V operating range does not remove the need for careful supply-noise control because USB transceiver activity and digital switching can disturb analog measurements. Route sensitive ADC inputs away from USB D+ and D-, clock signals, and high-current switching paths. Use the manufacturer layout guidance to preserve USB impedance and minimize unwanted coupling.
Route USB D+ and D- as a closely coupled, balanced pair on a continuous reference plane, avoiding plane changes, stubs, and splits beneath the pair. Keep the pair length matched according to the Microchip Technology USB hardware design guidance and place connector-side protection close to the entry point. If the product uses a separate USB transceiver, follow the specified transceiver data-sheet layout rather than treating the MCU USB pins as a generic high-speed interface.
The MCU can enter very low-current sleep states, but system power depends on every attached peripheral and the selected regulator. Estimated power planning should use the MCU operating-mode currents from the manufacturer datasheet together with sensor, USB-transceiver, pull-up, and regulator leakage values. Disable unused peripherals and GPIO outputs before sleep, and confirm that the regulator can start quickly enough for the application's wake-up interval without exceeding the brownout limits.
Do not substitute an M4, M5, SO, or QFN package code solely because the base device name is identical. The ordering suffix defines the physical package, lead dimensions, and land pattern. Likewise, confirm the temperature grade when using E/SS or the non-suffixed variant in place of I/SS. After substitution, verify pin multiplexing, programming and debug connections, USB support, supply limits, and the exposed pad requirements against the applicable package drawing.
اطلاعات انطباق
Compliance declarations are not stated in the available product records. AEC-Q100 is not applicable because this is an industrial microcontroller rather than an automotive-qualified device.