Microchip Technology

PIC24FJ32MC101-E/SS - 16-bit 32KB Motor MCU | Microchip

MPN: PIC24FJ32MC101-E/SS ✓ Aktif
3 V to 3.6 V Vdss 20-pin SSOP Package 32 KB Flash (11K × 24 bits) Memory
MOQ: 1 |

PIC24FJ32MC101-E/SS Genel Bakış

The Microchip Technology PIC24FJ32MC101-E/SS is a 16-bit motor-control microcontroller operating at 16 MIPS with 32 KB of Flash memory, 2 KB of SRAM, and a 3.3 V supply range in a 20-pin SSOP package. Its integrated CTMU, motor-control PWM peripherals, and PPS capability support compact, energy-efficient control systems where deterministic sensing and motor timing are important.

A PIC24FJ microcontroller belongs to the 8-bit and 16-bit embedded-controller hierarchy used for real-time control, sensor conditioning, communications, and actuator management. Unlike a general-purpose microcontroller focused primarily on connectivity or human-interface functions, this device combines a 16-bit core with dedicated resources for motor-drive timing and analog measurement. Its compact package supports cost-sensitive industrial, appliance, and embedded equipment designs.

The device provides 32 KB of program Flash organized as 11K × 24 bits and 2 KB of data RAM. It operates from 3 V to 3.6 V, allowing use with common 3.3 V power systems. CTMU supports capacitive measurement and touch-oriented sensing, while the motor-control PWM peripherals provide hardware-assisted waveform generation. A peripheral pin-select feature can map supported digital functions onto designated I/O pins, reducing software configuration complexity.

The 16-bit architecture and 16 MIPS execution rate provide a practical balance between control-loop performance, memory efficiency, and implementation cost. Program memory is adequate for embedded motor algorithms, state machines, and communication handlers, while 2 KB of SRAM supports working variables and control calculations. The 20-SSOP outline also reduces board area compared with larger leaded motor-control packages.

Typical uses include small brushless-DC and brushed motor controllers, appliance drive modules, battery-operated pumps, fan controllers, industrial sensor nodes, and compact two-wheeled-vehicle controls. The combination of CTMU, PWM peripherals, PPS, and a 3.3 V operating range is especially useful when touch sensing, timing synchronization, and motor control must share a cost-sensitive embedded platform.

PCB design should reserve clean routing for motor-control signals, provide local bypass capacitance at the supply pins, and keep switching or high-current motor outputs away from sensitive analog and timing paths. Firmware should validate startup, fault handling, and motor states before enabling PWM output, and the selected crystal or timing configuration should be checked against the application’s speed and timing requirements.

This page combines the PIC24FJ32MC101-E/SS specification summary, sourcing guidance, family-level alternatives, and practical design considerations. It also helps engineers compare package constraints, memory, peripherals, and application fit before committing a 20-pin motor-control design to production.

Drop-in alternatifler için PIC24FJ32MC101-E/SS — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller PIC24FJ32MC101-E/SS (aynı form faktörü ve ayağa oturma) — farklı olan Package, CPU Architecture, Operating Temperature, Peripheral Pin Select, Product Type.

Microchip Technology
CPU Architecture: PIC24F 16-bit core
Operating Temperature: -40°C to +125°C
Peripheral Pin Select: Supported
Microchip Technology
Package: 28-SSOP (5.30 mm body width)

PIC24FJ32MC102-E/SS

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
Microchip Technology
📦 20-SSOP
PIC24F 16-bit RISC (modified Harvard) · 16 MIPS · 32 KB (11K x 24) · 2 KB · 3.0 V to 3.6 V · 32 MHz (with PLL) · -40C to +125C (Extended, E grade) · 28-SSOP (5.30 mm body width)

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

PIC24FJ32MC104-E/SS

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 20-SSOP
Shares the 20-SSOP footprint, 16-bit core, 16 MIPS rate, and 3.3 V supply class; available peripherals may differ by 0% or more within the same family

📋 Katalogda Olmayan Referans Alternatifi

PIC24FJ32MC101-I/SS

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
Microchip Technology
📦 20-SSOP
16-bit Flash microcontroller · PIC24F 16-bit core · 16 MIPS · 32 MHz · 32 KB (11K x 24 words) · 2 KB · 3.0 V to 3.6 V · 3.3 V

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

PIC24FJ32MC101-E/SS Maksimum Değerlendirmeler & Elektriksel Özellikler

Product Type 16-bit motor-control microcontroller
CPU Architecture 16-bit PIC24F
Maximum Instruction Rate 16 MIPS
Program Memory 32 KB Flash (11K × 24 bits)
Data Memory 2 KB SRAM
Supply Voltage Range 3 V to 3.6 V
ADC Resolution 10 bits
Motor-Control PWM Integrated MCPWM peripherals
Touch and Analog Peripheral Integrated CTMU
Peripheral Pin Select PPS supported
Paket 20-pin SSOP
Montaj Türü Surface mount
İşletim Sıcaklığı -40 °C to +125 °C
Automotive Qualification AEC-Q100 family variant indicated by the automotive listing

PIC24FJ32MC101-E/SS 20-pin ssop Pin Yapısı Kılavuzu

PIC24FJ32MC101-E/SS (20-pin ssop paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.

20-pin ssop paket pin çizelgesi için PIC24FJ32MC101-E/SS

Ayrıntılı pin çıkış verisi mevcut değil: PIC24FJ32MC101-E/SS.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

PIC24FJ32MC101-E/SS için uygundur 6 uygulamas: Compact Brushless DC Motor Control, Appliance Motor and Pump Driver, Battery-Operated Fan Controller, Capacitive Touch Control Panel, Industrial Sensor and Actuator Node, Two-Wheeled Vehicle Motor Control.

⚡

Compact Brushless DC Motor Control

The PIC24FJ32MC101-E/SS fits compact brushless-DC controllers because its 16-bit core executes at 16 MIPS while the MCPWM peripherals provide deterministic switching waveforms. The 32 KB of Flash can hold a speed-control loop, commutation state machine, and protection logic, while 2 KB of SRAM provides working space for control calculations. Its 3 V to 3.6 V operating range also simplifies integration with a common 3.3 V motor-drive rail. The principal design trade-off is that a single low-pin-count package requires careful allocation of PWM, communication, sensing, and debug functions.

🏭

Appliance Motor and Pump Driver

The PIC24FJ32MC101-E/SS is appropriate for appliance motors, pumps, and small circulation systems where deterministic PWM timing and compact packaging are central requirements. Its 16 MIPS processing rate can support a current-control loop, load handling, and fault supervision in one controller, while CTMU can add touch or level sensing without requiring a separate input device. The 20-SSOP footprint preserves board area, but motor transients and heating remain the primary engineering concerns. Separate isolation or filtering may be required when the motor and controller share a compact board.

💡

Battery-Operated Fan Controller

The PIC24FJ32MC101-E/SS suits low-power fan controllers because it combines a 16-bit control engine, 2 KB of SRAM, and 32 KB of Flash in a compact 20-SSOP package. PWM generation, CTMU-based controls, and PPS timing can support variable-speed operation, touch controls, and synchronization with other system clocks. Its 3 V to 3.6 V supply range aligns with common 3.3 V battery-derived rails. Firmware should include stalled-rotor, startup, and brownout handling because the MCU does not replace external motor protection hardware.

🧩

Capacitive Touch Control Panel

The PIC24FJ32MC101-E/SS can combine touch sensing and motor control in one compact controller through its integrated CTMU and MCPWM resources. A designer can use CTMU for keypad, slider, or level sensing while the 16-bit core handles display updates, motor sequencing, and communication. The 20-SSOP package reduces total component count in appliances and compact industrial equipment. CTMU accuracy still depends on careful sensor grounding, guard structures, filtering, and calibration, while switching-motor energy can interfere with sensitive measurements.

🔧

Industrial Sensor and Actuator Node

The PIC24FJ32MC101-E/SS works well in small industrial nodes that must acquire analog measurements and operate a limited number of actuators. Its 10-bit ADC supports basic process measurements, the 16 MIPS core provides sufficient control-loop bandwidth, and 32 KB of Flash supports local logic and configuration storage. The 20-SSOP outline is useful in distributed equipment where board area is constrained. Industrial deployments should add transient protection, calibration, watchdog strategy, and continuous environmental testing because controller qualification alone does not validate the complete sensor node.

🚗

Two-Wheeled Vehicle Motor Control

The PIC24FJ32MC101-E/SS can serve as a compact motor controller for traction, steering, or braking functions in small two-wheeled vehicles. The 16-bit core at 16 MIPS supports field-oriented control or other computationally intensive current-control methods, and the MCPWM peripherals assist deterministic bridge-drive timing. CTMU may support interface or presence sensing. Safety-critical designs require independent protection paths, watchdog behavior, fault logging, and validation across voltage, temperature, vibration, and electromagnetic environments; the MCU itself does not provide complete functional-safety certification.

Önerilen Ürünler Özeti

PIC24FJ32MC102-E/SS Microchip Technology Kullanıldığı Yer: Compact Brushless DC Motor Control, Appliance Motor and Pump Driver, Capacitive Touch Control Panel, Two-Wheeled Vehicle Motor Control PIC24FJ32MC104-E/SS Same-package PIC24FJ motor-control family option Kullanıldığı Yer: Compact Brushless DC Motor Control, Battery-Operated Fan Controller, Capacitive Touch Control Panel, Industrial Sensor and Actuator Node, Two-Wheeled Vehicle Motor Control PIC24FJ32MC101-I/SS Microchip Technology Kullanıldığı Yer: Appliance Motor and Pump Driver, Battery-Operated Fan Controller, Industrial Sensor and Actuator Node
What are the key specifications of PIC24FJ32MC101-E/SS that engineers should know?
The PIC24FJ32MC101-E/SS is a 16-bit PIC24F motor-control microcontroller with 16 MIPS performance, 32 KB of Flash, 2 KB of SRAM, and a 3 V to 3.6 V supply range. According to the Microchip data sheet, it combines CTMU, MCPWM peripherals, and PPS in a 20-pin SSOP package, making it suitable for compact motor-drive and capacitive-sensing designs.
What is the operating voltage of PIC24FJ32MC101-E/SS?
The PIC24FJ32MC101-E/SS operates from 3 V to 3.6 V. This range supports common 3.3 V embedded systems and reduces the need for a separate low-voltage regulator when the motor-drive architecture already produces a suitable 3.3 V rail. The manufacturer data sheet should be consulted for decoupling, power-up, and maximum operating conditions.
How much Flash and RAM does PIC24FJ32MC101-E/SS have?
The PIC24FJ32MC101-E/SS contains 32 KB of Flash program memory and 2 KB of SRAM. According to Microchip’s product listing, the Flash is organized as 11K × 24 bits, while distributor descriptions identify 2 KB of RAM. These resources support compact control firmware, sensor processing, state machines, and communication routines.
What can replace PIC24FJ32MC101-E/SS?
The closest board-compatible replacements are PIC24FJ32MC102-E/SS, PIC24FJ32MC104-E/SS, and PIC24FJ32MC101-I/SS because they retain the 20-SSOP format and the PIC24FJ32MC101 motor-control platform. Firmware, peripheral availability, memory mapping, and qualification requirements must be checked before substitution; pin compatibility alone does not guarantee identical behavior.
Is PIC24FJ32MC101-E/SS suitable for brushless DC motor control?
Yes, the PIC24FJ32MC101-E/SS is suitable for compact brushless-DC motor-control designs using its 16-bit core, 16 MIPS execution rate, MCPWM peripherals, CTMU, and PPS. It is especially useful when the controller also needs capacitive sensing or synchronized timing. The exact motor topology, current sensing method, protection strategy, and firmware control loop still require application-level validation.
PIC24FJ32MC101-E/SS vs PIC24FJ32MC102-E/SS - which is better for motor control?
PIC24FJ32MC101-E/SS is the general choice for a 16-bit, 32 KB Flash motor-control design, while PIC24FJ32MC102-E/SS is appropriate when the project uses the additional resources or peripheral arrangement of that family member. Both are 20-pin SSOP devices intended for 3.3 V motor-control systems. Choose the variant whose documented peripherals and pin assignments match the required board.
When should I choose PIC24FJ32MC101-E/SS over PIC24FJ32MC101-I/SS?
Choose PIC24FJ32MC101-E/SS when the product follows the manufacturer’s E-grade ordering configuration for industrial-temperature operation and the associated qualification or sourcing plan. Consider PIC24FJ32MC101-I/SS only after confirming its temperature grade, qualification status, and lifecycle terms against the design requirements. Both retain the same 20-SSOP mechanical format.
Where can I download the PIC24FJ32MC101-E/SS datasheet PDF?
Download the PIC24FJ16MC101/102 and PIC24FJ32MC101/102/104 data sheet from Microchip Technology at the official DeviceDoc PDF link shown on this page. It contains the shared family architecture, electrical characteristics, peripheral details, and package information needed to select the correct variant and complete a hardware design.
Where can I find the PIC24FJ32MC101-E/SS pinout?
The PIC24FJ32MC101-E/SS pin assignment is documented in the Microchip family data sheet under the 20-SSOP pin-description and package-outline sections. Use that table when assigning VDD, VSS, programming, clock, communications, PWM, CTMU, and general-purpose I/O functions to the PCB, and follow the indicated exposed or reserved connections exactly.
Is PIC24FJ32MC101-E/SS in stock?
Current stock should be requested through the Request a Quote form on this page because inventory can vary by package, quantity, and production schedule. The same form can confirm current lead time, minimum order quantity, and standard packaging. Do not infer availability from a product-page index or from a listing that does not identify the exact E/SS ordering code.
What is the price of PIC24FJ32MC101-E/SS?
Use the Request a Quote form on this page for the current price of PIC24FJ32MC101-E/SS. The form supports quantity-based sourcing and avoids stale unit or volume-break figures. Confirm that the quotation references the complete PIC24FJ32MC101-E/SS MPN so the manufacturer’s 20-SSOP ordering configuration is matched correctly.
Where can I buy PIC24FJ32MC101-E/SS online?
Submit the exact MPN PIC24FJ32MC101-E/SS through the Request a Quote form on this page. The request can establish current commercial availability, production allocation, and lead time for the 20-SSOP package. Include the required quantity and target delivery date so the sourcing response reflects the actual project schedule.
What is the lead time for PIC24FJ32MC101-E/SS?
The current lead time for PIC24FJ32MC101-E/SS should be confirmed through the Request a Quote form on this page. Lead time can change with order quantity, package availability, and production scheduling, so a project-specific answer is more useful than a generic stock statement. Include forecast consumption and required delivery timing in the request.
What is the best Microchip equivalent for PIC24FJ32MC101-E/SS?
PIC24FJ32MC102-E/SS is the leading same-package family alternative because it remains in the 20-SSOP motor-control family with the same 16-bit architecture and 3.3 V supply class. It is not automatically function-identical, so verify peripheral availability, pin multiplexing, memory requirements, and firmware dependencies before approving it as a drop-in replacement.
Does PIC24FJ32MC101-E/SS support CTMU, MCPWM, and PPS?
Yes, Microchip identifies CTMU, motor-control PWM peripherals, and PPS as defining resources of the PIC24FJ32MC101 family. These features support capacitive sensing, deterministic motor waveform generation, and peripheral-function remapping. The device’s 16-bit core at 16 MIPS and 2 KB of SRAM provide the processing foundation for the corresponding embedded control tasks.

Mühendislik referans verileri: PIC24FJ32MC101-E/SS — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose PIC24FJ32MC101-E/SS for a compact 3.3 V motor-control design that needs a 16-bit core, 16 MIPS execution, 32 KB Flash, 2 KB SRAM, CTMU, MCPWM, and PPS in a 20-SSOP package. Consider PIC24FJ32MC102-E/SS when its documented peripheral arrangement better matches the board, and evaluate PIC24FJ32MC104-E/SS similarly for family-specific peripheral requirements. PIC24FJ32MC101-I/SS may fit when its ordering grade and qualification conditions align with the product plan. Because these are MCUs rather than simple analog substitutes, a mechanical footprint match is only the first checkpoint: validate pin multiplexing, PWM channels, CTMU inputs, PPS mappings, memory use, interrupt behavior, and existing firmware dependencies before approving a replacement.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün PIC24FJ32MC102-E/SS PIC24FJ32MC104-E/SS PIC24FJ32MC101-I/SS
Package 20-SSOP 20-SSOP 20-SSOP 20-SSOP
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
CPU Architecture 16-bit PIC24F 16-bit PIC24F 16-bit PIC24F 16-bit PIC24F
Maximum Instruction Rate 16 MIPS 16 MIPS 16 MIPS 16 MIPS
Program Memory 32 KB Flash 32 KB Flash 32 KB Flash 32 KB Flash
Data Memory 2 KB SRAM 2 KB SRAM 2 KB SRAM 2 KB SRAM
Supply Voltage Range 3 V to 3.6 V 3 V to 3.6 V 3 V to 3.6 V 3 V to 3.6 V
Motor-Control PWM Integrated MCPWM peripherals Integrated MCPWM peripherals Integrated MCPWM peripherals Integrated MCPWM peripherals
CTMU Integrated Integrated Integrated Integrated
PPS Support Supported Supported Supported Supported

Ana Farklılayıcılar

  • Dedicated motor-control integration (karşılaştırma:PIC24FJ32MC101-I/SS)
  • Compact 20-pin implementation (karşılaştırma:PIC24FJ32MC102-E/SS)
  • Balanced embedded resources (karşılaştırma:PIC24FJ32MC104-E/SS)

Tasarım Notları

Place the required input bypass capacitor close to each VDD pin and connect the VSS pins to the ground plane using short, low-impedance paths. Route motor-switching outputs away from CTMU inputs, ADC inputs, and oscillator circuitry. A continuous ground reference beneath the 20-SSOP footprint helps control return current, while a quiet analog ground region can reduce coupling between sensing and switching sections.

Treat the MCPWM outputs as high-current board interfaces even though the microcontroller itself only generates control signals. Keep gate-drive traces short, use separate return paths for power-stage current, and place protection or snubber networks near the power devices rather than near the MCU. Differential or sensitive sensor traces should not run beneath motor-switching nodes or alongside high di/dt conductors.

Do not assume that a family member with the same package is firmware-compatible without reviewing its peripheral map. Check PWM channel availability, PPS assignments, CTMU channels, interrupt vectors, analog functions, and pin multiplexing before migrating a design. The E and I ordering suffixes can affect qualification and sourcing decisions even when the electrical core and footprint remain unchanged.

The PIC24FJ32MC101-E/SS operates from 3 V to 3.6 V, so the motor-driver rail must remain within that range during startup, braking, and transient conditions. Use adequate bulk and local ceramic capacitance between the regulator and MCU. A separate regulator or filtering strategy may be needed if the motor bridge produces rail disturbances that exceed the allowable input ripple.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

An automotive listing references an AEC-Q100 family variant, but the exact qualification status of PIC24FJ32MC101-E/SS should be confirmed with the manufacturer. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation for the exact ordering code.

Veri doğrulanma tarihi: 2026-11-16 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

PIC24FJ32MC101-E/SS datasheet PIC24FJ32MC101-E/SS datasheet pdf PIC24FJ32MC101-E/SS pinout PIC24FJ32MC101-E/SS specifications PIC24FJ32MC101-E/SS replacement PIC24FJ32MC101-E/SS equivalent PIC24FJ32MC101-E/SS cross reference PIC24FJ32MC101-E/SS price PIC24FJ32MC101-E/SS stock Microchip PIC24FJ32MC101-E/SS PIC24FJ32MC101-E/SS 20-SSOP footprint PIC24FJ32MC101-E/SS motor control PIC24FJ32MC101-E/SS vs PIC24FJ32MC102-E/SS

İlgili Bileşenler ve Terimler

Microchip Technology PIC24FJ32MC101-E/SS PIC24FJ32MC102-E/SS PIC24FJ32MC104-E/SS PIC24FJ32MC101-I/SS PIC24FJ 16-bit microcontroller motor-control microcontroller embedded controller PIC24F core MCPWM CTMU PPS 10-bit ADC 32 KB Flash 2 KB SRAM 20-SSOP surface-mount package 3.3 V embedded control brushless DC motor control capacitive touch sensing AEC-Q100
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle