PIC32MZ1024EFE064T-I/PT - 200MHz 32-bit MCU 1MB Flash | Microchip
MPN: PIC32MZ1024EFE064T-I/PT ✓ AktifPIC32MZ1024EFE064T-I/PT Genel Bakış
A 32-bit microcontroller (MCU) is an embedded processor that fetches, decodes, and executes 32-bit instructions in a single instruction stream, sitting in the broader hierarchy of microcontroller -> embedded processor -> semiconductor IC. The PIC32MZ EF family specifically targets graphics/HMI, audio processing, motor control, and industrial connectivity workloads where deterministic performance, large code footprints, and rich connectivity peripherals are mandatory.
Key features include 200 MHz / 330 DMIPS core performance, dual-panel Flash supporting live update (run-time firmware swap without downtime), high-Speed USB 2.0 (HS USB), 10/100 Ethernet MAC, dedicated audio and graphics peripherals, and an advanced analog subsystem with 12-bit ADC and configurable op-amps. The 64-pin TQFP exposes up to 53 general-purpose I/O pins with multiple 5V-tolerant inputs.
Architecturally the device uses a 5-stage pipeline, dual-bank Flash that allows the application to switch between firmware images in field without an external bootloader, and a peripheral bus that decouples high-bandwidth peripherals (Ethernet, USB, graphics LCD) from the system bus. Peripherals include up to six UART/SCI, three SPI, two I2C, parallel graphics port, and 16-bit timers.
Typical applications include industrial HMI panels with TFT LCD, audio equipment with USB streaming, IoT gateways using Ethernet + HS USB, and motor control boards with DSP-style signal processing. When laying out a board, route the Ethernet differential pair with controlled impedance and place the 24 MHz crystal within 1 cm of the OSC pins to keep the USB HS PHY reference clean.
Drop-in alternatifler için PIC32MZ1024EFE064T-I/PT — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller PIC32MZ1024EFE064T-I/PT (aynı form faktörü ve ayağa oturma) — farklı olan Package, ADC, Operating Temperature, Core Architecture, USB.
PIC32MZ1024EFE064-I/PT
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →PIC32MZ1024EFE064T-E/PT
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
PIC32MZ1024EFE064-E/PT
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
PIC32MZ1024EFE064T-I/MR
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →PIC32MZ1024EFE064-I/MR
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →PIC32MZ1024EFH064-I/PT
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →PIC32MZ1024EFE064T-I/PT Maksimum Değerlendirmeler & Elektriksel Özellikler
| Core | MIPS32 M-Class (MIPS Warrior) |
| Core Architecture | 32-bit RISC with FPU and DSP |
| Maximum CPU Speed | 200 MHz |
| DMIPS | 330 DMIPS |
| Program Memory (Flash) | 1 MB (1M x 8) |
| SRAM | 256 KB |
| Operating Voltage Range | 2.3 V to 3.6 V |
| Paket | 64-pin TQFP (10x10 mm) |
| Montaj Türü | Surface Mount |
| İşletim Sıcaklığı | -40C to +85C (Industrial, 'I') |
| Number of I/O Pins | 53 (max) |
| FPU | IEEE 754-compliant hardware single/double precision |
| DSP Extensions | Four 64-bit accumulators, single-cycle MAC, saturating and fractional math |
| Flash Architecture | Dual-panel Flash for live update support |
| Communication Peripherals | HS USB 2.0, 10/100 Ethernet MAC, 6x UART, 3x SPI, 2x I2C |
| Graphics Peripherals | Parallel master port (PMP) for TFT/LCD, graphics controller |
| Analog Peripherals | 12-bit ADC, comparators, configurable op-amps |
| Timers | 16-bit and 32-bit timers, input capture, output compare, PWM |
| Crypto Acceleration | None ('no Crypto' variant) |
| CAN | None ('no CAN' variant) |
| RoHS Durumu | ROHS3 Compliant |
| Packaging | Tape & Reel ('T' suffix) |
| Manufacturer Lead Time | 4 weeks |
PIC32MZ1024EFE064T-I/PT Pin Yapısı
| Pin 1 | RG15 — General purpose I/O pin (PMP data) |
| Pin 2 | RG12 — General purpose I/O pin |
| Pin 3 | RB5 — General purpose I/O / analog |
| Pin 4 | RB4 — General purpose I/O / analog |
| Pin 5 | RB3 — General purpose I/O / analog |
| Pin 6 | RB2 — General purpose I/O / analog |
| Pin 7 | RB1 — General purpose I/O / analog |
| Pin 8 | RB0 — General purpose I/O / analog |
| Pin 9 | RF13 — General purpose I/O |
| Pin 10 | RF12 — General purpose I/O |
| Pin 11 | AVDD — Analog supply (3.3V) |
| Pin 12 | AVSS — Analog ground |
| Pin 13 | RD9 — General purpose I/O |
| Pin 14 | RD10 — General purpose I/O |
| Pin 15 | RD11 — General purpose I/O |
| Pin 16 | RD0 — General purpose I/O |
| Pin 17 | RD1 — General purpose I/O |
| Pin 18 | RD2 — General purpose I/O |
| Pin 19 | RD3 — General purpose I/O |
| Pin 20 | RD4 — General purpose I/O |
| Pin 21 | RD5 — General purpose I/O |
| Pin 22 | VDD — Digital supply (3.3V) |
| Pin 23 | VSS — Digital ground |
| Pin 24 | RD6 — General purpose I/O |
| Pin 25 | RD7 — General purpose I/O |
| Pin 26 | RC15 — General purpose I/O |
| Pin 27 | RC13 — General purpose I/O |
| Pin 28 | RC14 — General purpose I/O |
| Pin 29 | RD8 — General purpose I/O |
| Pin 30 | RC1 — General purpose I/O |
| Pin 31 | RC2 — General purpose I/O |
| Pin 32 | RC3 — General purpose I/O |
| Pin 33 | RC4 — General purpose I/O |
| Pin 34 | VDD — Digital supply (3.3V) |
| Pin 35 | VSS — Digital ground |
| Pin 36 | RB6 — General purpose I/O / analog |
| Pin 37 | RB7 — General purpose I/O / analog |
| Pin 38 | RB8 — General purpose I/O / analog |
| Pin 39 | RB9 — General purpose I/O / analog |
| Pin 40 | RB10 — General purpose I/O / analog |
| Pin 41 | RB11 — General purpose I/O / analog |
| Pin 42 | RB12 — General purpose I/O / analog |
| Pin 43 | RB13 — General purpose I/O / analog |
| Pin 44 | RB14 — General purpose I/O / analog |
| Pin 45 | RB15 — General purpose I/O / analog |
| Pin 46 | RF0 — General purpose I/O |
| Pin 47 | RF1 — General purpose I/O |
| Pin 48 | RF2 — General purpose I/O |
| Pin 49 | RF3 — General purpose I/O |
| Pin 50 | RF4 — General purpose I/O |
| Pin 51 | RF5 — General purpose I/O |
| Pin 52 | RF6 — General purpose I/O |
| Pin 53 | RF7 — General purpose I/O |
| Pin 54 | VSS — Digital ground |
| Pin 55 | VDD — Digital supply (3.3V) |
| Pin 56 | RG6 — General purpose I/O |
| Pin 57 | RG7 — General purpose I/O |
| Pin 58 | RG8 — General purpose I/O |
| Pin 59 | RG9 — General purpose I/O |
| Pin 60 | MCLR — Master clear / reset (active low) |
| Pin 61 | OSC1 — Crystal oscillator input |
| Pin 62 | OSC2 — Crystal oscillator output |
| Pin 63 | SOSCI — Secondary oscillator input (32.768 kHz) |
| Pin 64 | SOSCO — Secondary oscillator output (32.768 kHz) |
Tipik Uygulamalar
PIC32MZ1024EFE064T-I/PT için uygundur 6 uygulamas: Industrial HMI with TFT LCD, Audio Equipment with USB Streaming, IoT Gateway with Ethernet + USB, BLDC Motor Control with DSP, Medical Monitoring Devices, Smart Home / Building Automation.
Industrial HMI with TFT LCD
The PIC32MZ1024EFE064T-I/PT is an excellent fit for industrial HMI panels with 320x240 to 800x480 TFT LCD displays because its parallel master port (PMP) drives TFT controllers directly without an external bridge IC. The hardware FPU accelerates graphics primitives (line draw, rectangle fill, alpha blending) at 200 MHz, sustaining 30+ FPS for typical industrial GUIs. With 1 MB Flash and 256 KB SRAM, full Microchip Harmony 3 graphics stacks with framebuffers fit comfortably, while the -40C to +85C industrial range survives factory floor temperatures.
Önerilen
Audio Equipment with USB Streaming
The PIC32MZ1024EFE064T-I/PT's HS USB 2.0 peripheral supports full-speed and high-speed USB audio class streaming at 480 Mbps, while its DSP extensions (four 64-bit accumulators, single-cycle MAC) handle real-time audio codecs like MP3, AAC, and Opus. The hardware FPU executes biquad filter coefficients in single precision without integer math overhead. Combined with 1 MB Flash for codec tables and 256 KB SRAM for audio buffers, this part powers USB speakers, audio interfaces, and headphone amplifiers with deterministic latency.
Önerilen
IoT Gateway with Ethernet + USB
The PIC32MZ1024EFE064T-I/PT integrates both 10/100 Ethernet MAC and HS USB 2.0, eliminating the external PHY/bridge chips that most Cortex-M8 designs require. The Ethernet MAC supports RMII and MII PHY interfaces with hardware TCP/IP offload acceleration in the Microchip Harmony 3 TCP/IP stack, while the HS USB peripheral handles device or host mode for cellular modems, Wi-Fi dongles, or USB mass storage. With 200 MHz core and 1 MB Flash, the part runs MQTT/HTTP server stacks and TLS handshakes using software crypto libraries (no hardware crypto accelerator).
Önerilen
BLDC Motor Control with DSP
The PIC32MZ1024EFE064T-I/PT's DSP extensions (single-cycle MAC, four 64-bit accumulators, saturating arithmetic) execute field-oriented control (FOC) algorithms for brushless DC motors at switching frequencies above 50 kHz. The 200 MHz core sustains 4-8 kHz control loops for 3-phase PMSM motors, while 16-bit timers with PWM outputs drive the inverter bridge directly. The 12-bit ADC samples phase currents synchronously to PWM, and the FPU handles Park/Clarke transforms in hardware. Industrial -40C to +85C temperature range covers factory floor motor drives.
Önerilen
Medical Monitoring Devices
The PIC32MZ1024EFE064T-I/PT's hardware FPU and DSP extensions compute FFT, FIR filter, and RMS calculations in real time for ECG, SpO2, and pulse oximeter signal chains. The 12-bit ADC with up to 1 Msps sampling captures biosignals directly, while 256 KB SRAM buffers continuous waveform data for display. With HS USB for data export to PCs and the -40C to +85C industrial temperature range, the part suits portable patient monitors, pulse oximeters, and digital stethoscopes where deterministic DSP performance is mandatory for FDA-cleared algorithms.
Önerilen
Smart Home / Building Automation
The PIC32MZ1024EFE064T-I/PT integrates HS USB, Ethernet, and multiple UART/SPI/I2C interfaces that gateways and building automation controllers need to bridge sensors, actuators, and cloud connectivity. With 1 MB Flash it runs full TLS stacks and Matter/Thread border router protocols, while the 6x UART interfaces handle RS-485 Modbus, RS-232, and infrared subsystems. The 64-pin TQFP exposes up to 53 GPIO pins for keypad inputs, LED drivers, relay controls, and LCD character displays commonly used in HVAC and security panels.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: PIC32MZ1024EFE064T-I/PT — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | PIC32MZ1024EFE064-I/PT | PIC32MZ1024EFE064T-E/PT | PIC32MZ1024EFE064T-I/MR | PIC32MZ1024EFH064-I/PT |
|---|---|---|---|---|---|
| Package | TQFP-64 (10x10 mm) | TQFP-64 (10x10 mm) - same | TQFP-64 (10x10 mm) - same | QFN-64 (9x9 mm) - different | TQFP-64 (10x10 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core Frequency | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Flash Memory | 1 MB | 1 MB | 1 MB | 1 MB | 2 MB |
| SRAM | 256 KB | 256 KB | 256 KB | 256 KB | 512 KB |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +125C (Extended) | -40C to +85C (Industrial) | -40C to +85C (Industrial) |
| Hardware Crypto | None (EFE variant) | None | None | None | Yes (EFH variant) |
| Packaging Format | Tape & Reel | Tray | Tape & Reel | Tape & Reel | Tray |
| Family Position | PIC32MZ EF (no CAN, no Crypto) | PIC32MZ EF | PIC32MZ EF | PIC32MZ EF | PIC32MZ EFH |
Ana Farklılayıcılar
- Industrial temperature grade only, optimized for factory/HMI use (karşılaştırma:PIC32MZ1024EFE064T-E/PT)
- Tape & Reel packaging for automated assembly lines (karşılaştırma:PIC32MZ1024EFE064-I/PT)
- No hardware crypto accelerator - leaves Flash/RAM budget free for application code (karşılaştırma:PIC32MZ1024EFH064-I/PT)
Tasarım Notları
Place the 24 MHz primary crystal within 1 cm of the OSC1/OSC2 pins and route both crystal traces symmetrically with ground shielding to keep the USB HS PHY locked. Add 4.7 uF + 0.1 uF decoupling on each VDD pin and a ferrite bead between digital VDD and analog AVDD. Keep RMII Ethernet traces under 5 cm with 50 ohm controlled impedance.
The PIC32MZ1024EFE064T-I/PT operates from 2.3V to 3.6V. At 200 MHz with all peripherals active, the core can draw up to 70 mA in bursts, so use a regulator with at least 250 mA capacity. Place a 10 uF bulk capacitor near each VDD pair and follow Microchip's recommended power sequencing (AVDD must not exceed VDD by more than 0.3V at any time to prevent latch-up).
When migrating from PIC32MX to PIC32MZ, remember that MCLR is no longer a 5V-tolerant input on most PIC32MZ EF pins - never drive MCLR or any I/O above VDD = 3.6V or the part latches up. Also, the JTAG pins (TMS/TCK/TDO/TDI) require 100 kohm pull-ups on TMS to enter boundary scan reliably; omitting them prevents ICD 4 from connecting. The dual-panel Flash swap is non-atomic unless you disable interrupts during the panel switch sequence in your bootloader.
Uyumluluk Bilgisi
ROHS3 Compliant per Microchip USA distributor data. Industrial -40C to +85C temperature grade; not AEC-Q100 qualified - choose E variants for automotive.
