PIC32MZ1024EFE064T-I/PT - 200MHz 32-bit MCU 1MB Flash | Microchip
Référence : PIC32MZ1024EFE064T-I/PT ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $14.85 | $14,85 |
| 10 | $13.42 | $134,20 |
| 100 | $11.95 | $1 195,00 |
| 500 | $10.78 | $5 390,00 |
| 1 000 | $9.85 | $9 850,00 |
PIC32MZ1024EFE064T-I/PT Présentation
A 32-bit microcontroller (MCU) is an embedded processor that fetches, decodes, and executes 32-bit instructions in a single instruction stream, sitting in the broader hierarchy of microcontroller -> embedded processor -> semiconductor IC. The PIC32MZ EF family specifically targets graphics/HMI, audio processing, motor control, and industrial connectivity workloads where deterministic performance, large code footprints, and rich connectivity peripherals are mandatory.
Key features include 200 MHz / 330 DMIPS core performance, dual-panel Flash supporting live update (run-time firmware swap without downtime), high-Speed USB 2.0 (HS USB), 10/100 Ethernet MAC, dedicated audio and graphics peripherals, and an advanced analog subsystem with 12-bit ADC and configurable op-amps. The 64-pin TQFP exposes up to 53 general-purpose I/O pins with multiple 5V-tolerant inputs.
Architecturally the device uses a 5-stage pipeline, dual-bank Flash that allows the application to switch between firmware images in field without an external bootloader, and a peripheral bus that decouples high-bandwidth peripherals (Ethernet, USB, graphics LCD) from the system bus. Peripherals include up to six UART/SCI, three SPI, two I2C, parallel graphics port, and 16-bit timers.
Typical applications include industrial HMI panels with TFT LCD, audio equipment with USB streaming, IoT gateways using Ethernet + HS USB, and motor control boards with DSP-style signal processing. When laying out a board, route the Ethernet differential pair with controlled impedance and place the 24 MHz crystal within 1 cm of the OSC pins to keep the USB HS PHY reference clean.
Alternatives de remplacement direct pour PIC32MZ1024EFE064T-I/PT — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC32MZ1024EFE064T-I/PT (même facteur de forme et même empreinte) — différant par Package, ADC, Operating Temperature, Core Architecture, USB.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC32MZ1024EFE064-I/PT
✅ Remplacement direct✓ En stock
$6.2 / unité
Voir la fiche technique →PIC32MZ1024EFE064T-E/PT
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC32MZ1024EFE064-E/PT
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC32MZ1024EFE064T-I/MR
✅ Remplacement direct✓ En stock
$9.85 / unité
Voir la fiche technique →PIC32MZ1024EFE064-I/MR
✅ Remplacement direct✓ En stock
$5.3 / unité
Voir la fiche technique →PIC32MZ1024EFH064-I/PT
✅ Remplacement direct✓ En stock
$7.69 / unité
Voir la fiche technique →PIC32MZ1024EFE064T-I/PT Valeurs maximales et caractéristiques électriques
| Core | MIPS32 M-Class (MIPS Warrior) |
| Core Architecture | 32-bit RISC with FPU and DSP |
| Maximum CPU Speed | 200 MHz |
| DMIPS | 330 DMIPS |
| Program Memory (Flash) | 1 MB (1M x 8) |
| SRAM | 256 KB |
| Operating Voltage Range | 2.3 V to 3.6 V |
| Boîtier | 64-pin TQFP (10x10 mm) |
| Type de montage | Surface Mount |
| Température de fonctionnement | -40C to +85C (Industrial, 'I') |
| Number of I/O Pins | 53 (max) |
| FPU | IEEE 754-compliant hardware single/double precision |
| DSP Extensions | Four 64-bit accumulators, single-cycle MAC, saturating and fractional math |
| Flash Architecture | Dual-panel Flash for live update support |
| Communication Peripherals | HS USB 2.0, 10/100 Ethernet MAC, 6x UART, 3x SPI, 2x I2C |
| Graphics Peripherals | Parallel master port (PMP) for TFT/LCD, graphics controller |
| Analog Peripherals | 12-bit ADC, comparators, configurable op-amps |
| Timers | 16-bit and 32-bit timers, input capture, output compare, PWM |
| Crypto Acceleration | None ('no Crypto' variant) |
| CAN | None ('no CAN' variant) |
| Statut RoHS | ROHS3 Compliant |
| Packaging | Tape & Reel ('T' suffix) |
| Manufacturer Lead Time | 4 weeks |
Configuration des broches de PIC32MZ1024EFE064T-I/PT
| Broche 1 | RG15 — General purpose I/O pin (PMP data) |
| Broche 2 | RG12 — General purpose I/O pin |
| Broche 3 | RB5 — General purpose I/O / analog |
| Broche 4 | RB4 — General purpose I/O / analog |
| Broche 5 | RB3 — General purpose I/O / analog |
| Broche 6 | RB2 — General purpose I/O / analog |
| Broche 7 | RB1 — General purpose I/O / analog |
| Broche 8 | RB0 — General purpose I/O / analog |
| Broche 9 | RF13 — General purpose I/O |
| Broche 10 | RF12 — General purpose I/O |
| Broche 11 | AVDD — Analog supply (3.3V) |
| Broche 12 | AVSS — Analog ground |
| Broche 13 | RD9 — General purpose I/O |
| Broche 14 | RD10 — General purpose I/O |
| Broche 15 | RD11 — General purpose I/O |
| Broche 16 | RD0 — General purpose I/O |
| Broche 17 | RD1 — General purpose I/O |
| Broche 18 | RD2 — General purpose I/O |
| Broche 19 | RD3 — General purpose I/O |
| Broche 20 | RD4 — General purpose I/O |
| Broche 21 | RD5 — General purpose I/O |
| Broche 22 | VDD — Digital supply (3.3V) |
| Broche 23 | VSS — Digital ground |
| Broche 24 | RD6 — General purpose I/O |
| Broche 25 | RD7 — General purpose I/O |
| Broche 26 | RC15 — General purpose I/O |
| Broche 27 | RC13 — General purpose I/O |
| Broche 28 | RC14 — General purpose I/O |
| Broche 29 | RD8 — General purpose I/O |
| Broche 30 | RC1 — General purpose I/O |
| Broche 31 | RC2 — General purpose I/O |
| Broche 32 | RC3 — General purpose I/O |
| Broche 33 | RC4 — General purpose I/O |
| Broche 34 | VDD — Digital supply (3.3V) |
| Broche 35 | VSS — Digital ground |
| Broche 36 | RB6 — General purpose I/O / analog |
| Broche 37 | RB7 — General purpose I/O / analog |
| Broche 38 | RB8 — General purpose I/O / analog |
| Broche 39 | RB9 — General purpose I/O / analog |
| Broche 40 | RB10 — General purpose I/O / analog |
| Broche 41 | RB11 — General purpose I/O / analog |
| Broche 42 | RB12 — General purpose I/O / analog |
| Broche 43 | RB13 — General purpose I/O / analog |
| Broche 44 | RB14 — General purpose I/O / analog |
| Broche 45 | RB15 — General purpose I/O / analog |
| Broche 46 | RF0 — General purpose I/O |
| Broche 47 | RF1 — General purpose I/O |
| Broche 48 | RF2 — General purpose I/O |
| Broche 49 | RF3 — General purpose I/O |
| Broche 50 | RF4 — General purpose I/O |
| Broche 51 | RF5 — General purpose I/O |
| Broche 52 | RF6 — General purpose I/O |
| Broche 53 | RF7 — General purpose I/O |
| Broche 54 | VSS — Digital ground |
| Broche 55 | VDD — Digital supply (3.3V) |
| Broche 56 | RG6 — General purpose I/O |
| Broche 57 | RG7 — General purpose I/O |
| Broche 58 | RG8 — General purpose I/O |
| Broche 59 | RG9 — General purpose I/O |
| Broche 60 | MCLR — Master clear / reset (active low) |
| Broche 61 | OSC1 — Crystal oscillator input |
| Broche 62 | OSC2 — Crystal oscillator output |
| Broche 63 | SOSCI — Secondary oscillator input (32.768 kHz) |
| Broche 64 | SOSCO — Secondary oscillator output (32.768 kHz) |
Applications typiques
PIC32MZ1024EFE064T-I/PT convient pour 6 applications: Industrial HMI with TFT LCD, Audio Equipment with USB Streaming, IoT Gateway with Ethernet + USB, BLDC Motor Control with DSP, Medical Monitoring Devices, Smart Home / Building Automation.
Industrial HMI with TFT LCD
The PIC32MZ1024EFE064T-I/PT is an excellent fit for industrial HMI panels with 320x240 to 800x480 TFT LCD displays because its parallel master port (PMP) drives TFT controllers directly without an external bridge IC. The hardware FPU accelerates graphics primitives (line draw, rectangle fill, alpha blending) at 200 MHz, sustaining 30+ FPS for typical industrial GUIs. With 1 MB Flash and 256 KB SRAM, full Microchip Harmony 3 graphics stacks with framebuffers fit comfortably, while the -40C to +85C industrial range survives factory floor temperatures.
Recommandé
Audio Equipment with USB Streaming
The PIC32MZ1024EFE064T-I/PT's HS USB 2.0 peripheral supports full-speed and high-speed USB audio class streaming at 480 Mbps, while its DSP extensions (four 64-bit accumulators, single-cycle MAC) handle real-time audio codecs like MP3, AAC, and Opus. The hardware FPU executes biquad filter coefficients in single precision without integer math overhead. Combined with 1 MB Flash for codec tables and 256 KB SRAM for audio buffers, this part powers USB speakers, audio interfaces, and headphone amplifiers with deterministic latency.
Recommandé
IoT Gateway with Ethernet + USB
The PIC32MZ1024EFE064T-I/PT integrates both 10/100 Ethernet MAC and HS USB 2.0, eliminating the external PHY/bridge chips that most Cortex-M8 designs require. The Ethernet MAC supports RMII and MII PHY interfaces with hardware TCP/IP offload acceleration in the Microchip Harmony 3 TCP/IP stack, while the HS USB peripheral handles device or host mode for cellular modems, Wi-Fi dongles, or USB mass storage. With 200 MHz core and 1 MB Flash, the part runs MQTT/HTTP server stacks and TLS handshakes using software crypto libraries (no hardware crypto accelerator).
Recommandé
BLDC Motor Control with DSP
The PIC32MZ1024EFE064T-I/PT's DSP extensions (single-cycle MAC, four 64-bit accumulators, saturating arithmetic) execute field-oriented control (FOC) algorithms for brushless DC motors at switching frequencies above 50 kHz. The 200 MHz core sustains 4-8 kHz control loops for 3-phase PMSM motors, while 16-bit timers with PWM outputs drive the inverter bridge directly. The 12-bit ADC samples phase currents synchronously to PWM, and the FPU handles Park/Clarke transforms in hardware. Industrial -40C to +85C temperature range covers factory floor motor drives.
Recommandé
Medical Monitoring Devices
The PIC32MZ1024EFE064T-I/PT's hardware FPU and DSP extensions compute FFT, FIR filter, and RMS calculations in real time for ECG, SpO2, and pulse oximeter signal chains. The 12-bit ADC with up to 1 Msps sampling captures biosignals directly, while 256 KB SRAM buffers continuous waveform data for display. With HS USB for data export to PCs and the -40C to +85C industrial temperature range, the part suits portable patient monitors, pulse oximeters, and digital stethoscopes where deterministic DSP performance is mandatory for FDA-cleared algorithms.
Recommandé
Smart Home / Building Automation
The PIC32MZ1024EFE064T-I/PT integrates HS USB, Ethernet, and multiple UART/SPI/I2C interfaces that gateways and building automation controllers need to bridge sensors, actuators, and cloud connectivity. With 1 MB Flash it runs full TLS stacks and Matter/Thread border router protocols, while the 6x UART interfaces handle RS-485 Modbus, RS-232, and infrared subsystems. The 64-pin TQFP exposes up to 53 GPIO pins for keypad inputs, LED drivers, relay controls, and LCD character displays commonly used in HVAC and security panels.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC32MZ1024EFE064T-I/PT — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC32MZ1024EFE064-I/PT | PIC32MZ1024EFE064T-E/PT | PIC32MZ1024EFE064T-I/MR | PIC32MZ1024EFH064-I/PT |
|---|---|---|---|---|---|
| Package | TQFP-64 (10x10 mm) | TQFP-64 (10x10 mm) - same | TQFP-64 (10x10 mm) - same | QFN-64 (9x9 mm) - different | TQFP-64 (10x10 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core Frequency | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Flash Memory | 1 MB | 1 MB | 1 MB | 1 MB | 2 MB |
| SRAM | 256 KB | 256 KB | 256 KB | 256 KB | 512 KB |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +125C (Extended) | -40C to +85C (Industrial) | -40C to +85C (Industrial) |
| Hardware Crypto | None (EFE variant) | None | None | None | Yes (EFH variant) |
| Packaging Format | Tape & Reel | Tray | Tape & Reel | Tape & Reel | Tray |
| Family Position | PIC32MZ EF (no CAN, no Crypto) | PIC32MZ EF | PIC32MZ EF | PIC32MZ EF | PIC32MZ EFH |
Principaux différenciateurs
- Industrial temperature grade only, optimized for factory/HMI use (vs PIC32MZ1024EFE064T-E/PT)
- Tape & Reel packaging for automated assembly lines (vs PIC32MZ1024EFE064-I/PT)
- No hardware crypto accelerator - leaves Flash/RAM budget free for application code (vs PIC32MZ1024EFH064-I/PT)
Notes de conception
Place the 24 MHz primary crystal within 1 cm of the OSC1/OSC2 pins and route both crystal traces symmetrically with ground shielding to keep the USB HS PHY locked. Add 4.7 uF + 0.1 uF decoupling on each VDD pin and a ferrite bead between digital VDD and analog AVDD. Keep RMII Ethernet traces under 5 cm with 50 ohm controlled impedance.
The PIC32MZ1024EFE064T-I/PT operates from 2.3V to 3.6V. At 200 MHz with all peripherals active, the core can draw up to 70 mA in bursts, so use a regulator with at least 250 mA capacity. Place a 10 uF bulk capacitor near each VDD pair and follow Microchip's recommended power sequencing (AVDD must not exceed VDD by more than 0.3V at any time to prevent latch-up).
When migrating from PIC32MX to PIC32MZ, remember that MCLR is no longer a 5V-tolerant input on most PIC32MZ EF pins - never drive MCLR or any I/O above VDD = 3.6V or the part latches up. Also, the JTAG pins (TMS/TCK/TDO/TDI) require 100 kohm pull-ups on TMS to enter boundary scan reliably; omitting them prevents ICD 4 from connecting. The dual-panel Flash swap is non-atomic unless you disable interrupts during the panel switch sequence in your bootloader.
Informations de conformité
ROHS3 Compliant per Microchip USA distributor data. Industrial -40C to +85C temperature grade; not AEC-Q100 qualified - choose E variants for automotive.
