S912XEG384BVALR - 16-bit S12X MCU 384KB Flash 50MHz | NXP
MPN: S912XEG384BVALR ✓ AktifS912XEG384BVALR Genel Bakış
What is a 16-bit CISC microcontroller? A 16-bit MCU such as the HCS12X executes instructions on data paths 16 bits wide, providing a balance between 8-bit simplicity and 32-bit performance. MCUs sit beneath microprocessors in the computing hierarchy: MCU -> microcontroller -> embedded controller -> semiconductor. The S12X family adds the XGATE peripheral co-processor, which offloads interrupt-driven tasks from the CPU, allowing deterministic real-time response in automotive networks and industrial control loops.
Key features of the S912XEG384BVALR include 384 KB (384K x 8) Flash, 32 KB RAM, 4 KB EEPROM, an enhanced CAN (msCAN) controller, multiple SCI/SPI/IIC serial interfaces, 8-channel 10-bit ADC, 16-bit Enhanced Capture Timer, PWM modules, and an external bus interface for memory expansion. The 50 MHz bus clock yields 40 ns minimum instruction cycle, supporting real-time control loops in body control modules.
The S12X core uses a von-Neumann architecture with 16-bit internal paths and a 24-bit address space, providing up to 8 MB of linear addressing. The XGATE peripheral co-processor delivers up to 100 MIPS sustained performance for interrupt-driven peripheral handling, offloading data transfers and signal processing from the main CPU. The 112-LQFP package exposes the full external bus interface, supporting external memory and peripheral expansion.
Typical applications include automotive body control modules, instrument clusters, door/seat/window modules, CAN node interfaces, HVAC controllers, industrial sensor hubs, and low-end gateway ECUs in vehicle networks. The AEC-Q100 qualification and 384 KB Flash make it suitable for automotive software stacks requiring diagnostic protocols such as UDS on CAN.
When designing with this part, allocate Flash pages carefully because Flash erase occurs at the page level. Use the BDM (Background Debug Mode) interface for non-intrusive in-circuit debug and Flash programming. The 5V-tolerant I/O simplifies integration into 12V automotive battery-fed systems with external regulators.
This page synthesizes distributor pricing, AEC-Q100 qualifications, and same-family drop-in alternatives (S912XEG384J2VAL, S912XEG384J2VAGR, MC9S12XEQ384CAG) not collated in any single distributor listing, paired with design notes absent from the datasheet alone.
Drop-in alternatifler için S912XEG384BVALR — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller S912XEG384BVALR (aynı form faktörü ve ayağa oturma) — farklı olan Package, Flash Memory, Operating Temperature, Core, Co-processor.
S912XEG384J2VAL
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →S912XEG384J2VAGR
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
MC9S12XEQ384CAG
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →S912XET512BMAGR
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →S9S12XF384J2MLMR
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →S912XEG384BVALR Maksimum Değerlendirmeler & Elektriksel Özellikler
| Core | HCS12X (S12X with XGATE co-processor) |
| Veri Bus Genişliği | 16-bit |
| Program Memory Size | 384 KB (384K x 8) FLASH |
| CPU Clock Frequency (Max) | 50 MHz |
| Besleme Gerilimi | 1.8 V |
| İşletim Sıcaklığı Aralığı | -40 °C to +105 °C |
| Paket | 112-LQFP (20 mm x 20 mm, 0.65 mm pitch) |
| Montaj Türü | Surface Mount |
| AEC-Q100 Qualification | Yes (automotive grade) |
| External Bus Interface | Yes (multiplexed address/data) |
| Debug Interface | BDM (Background Debug Mode) |
| RoHS Durumu | Compliant (per manufacturer product page) |
| Tape & Reel | Yes (R suffix) |
S912XEG384BVALR 112-lqfp (20 mm x 20 mm, 0.65 mm pitch) Pin Yapısı Kılavuzu
S912XEG384BVALR (112-lqfp (20 mm x 20 mm, 0.65 mm pitch) paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: S912XEG384BVALR.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
S912XEG384BVALR için uygundur 7 uygulamas: Automotive Body Control Modules, CAN Node ECUs in Vehicle Networks, Instrument Cluster Controllers, HVAC Climate Controllers, Door/Seat/Window Modules, Industrial Sensor Hubs and PLCs, Low-End Vehicle Gateways and Diagnostic Bridges.
Automotive Body Control Modules
The S912XEG384BVALR's 384 KB Flash and AEC-Q100 qualification at -40 °C to +105 °C make it ideal for body control modules (BCMs) that orchestrate lighting, wipers, door locks, and seat functions. With 50 MHz S12X CPU plus XGATE co-processor, the device handles multiple LIN/CAN message streams while executing BCM application logic deterministically. The 112-LQFP package exposes the external bus interface for additional peripheral expansion such as stepper motor drivers or segment LCD controllers.
Önerilen
CAN Node ECUs in Vehicle Networks
The S912XEG384BVALR integrates multiple msCAN modules supporting CAN 2.0A/B at up to 1 Mbps, making it a strong choice for CAN node ECUs in automotive networks running CANopen, J1939, or UDS diagnostics. 384 KB Flash accommodates full UDS stack plus application logic, while 50 MHz CPU handles real-time PDU processing. AEC-Q100 qualification simplifies OEM PPAP documentation.
Önerilen
Instrument Cluster Controllers
With the Enhanced Capture Timer supporting tachometer and speedometer pulse measurement plus PWM channels for analog gauge drive, the S912XEG384BVALR fits mid-range instrument cluster designs. 384 KB Flash holds graphics/driver libraries while AEC-Q100 qualification ensures cluster reliability under hood heat soak. 50 MHz speed supports smooth pointer sweep without flicker.
Önerilen
HVAC Climate Controllers
The 16-bit S12X core running at 50 MHz plus the 10-bit ADC for temperature/humidity sensing positions the S912XEG384BVALR as a core HVAC controller. AEC-Q100 qualification handles under-dash ambient temperatures, while 384 KB Flash holds climate control algorithms and CAN communication stacks. PWM channels drive blower motor and blend door actuators without external timers.
Önerilen
Door/Seat/Window Modules
Each door module needs a small, AEC-Q100-qualified MCU controlling window lift, mirror, lock, and illumination functions. The S912XEG384BVALR's PWM channels plus ADC make it a compact fit, with 384 KB Flash providing upgrade headroom for OEE features such as anti-pinch algorithms and LIN-based diagnostics to the BCM.
Önerilen
Industrial Sensor Hubs and PLCs
Beyond automotive, the -40 to +105 °C operating range and CAN connectivity support industrial sensor hubs and PLC remote I/O nodes. 384 KB Flash hosts Modbus or CANopen stacks on top of sensor-fusion logic, while deterministic S12X interrupt response ensures tight loop times for closed-loop control.
Önerilen
Low-End Vehicle Gateways and Diagnostic Bridges
The 384 KB Flash is sufficient for diagnostic bridging between vehicle networks such as CAN-to-LIN or CAN-to-CAN. The XGATE co-processor can offload message routing from the CPU, freeing cycles for higher-level diagnostic processing and DTC logging.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: S912XEG384BVALR — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | S912XEG384J2VAL | S912XEG384J2VAGR | MC9S12XEQ384CAG | S912XET512BMAGR | S9S12XF384J2MLMR |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 112-LQFP (20x20 mm) | 112-LQFP - same | 112-LQFP - same | 112-LQFP - same | 112-LQFP - same | 112-LQFP - same |
| Core | HCS12X (16-bit, XGATE) | HCS12X | HCS12X | HCS12X | HCS12X | HCS12X |
| Flash Size | 384 KB | 384 KB (same) | 384 KB (same) | 384 KB (same) | 512 KB (+33%) | 384 KB (same) |
| CPU Clock (Max) | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz |
| AEC-Q100 Qualified | Yes | Yes (different grade) | Yes | Yes | Yes | Yes |
| External Bus Interface | Yes | Yes | Yes | Yes | Yes | Yes |
| Operating Temperature | -40 °C to +105 °C | -40 °C to +85 °C / +105 °C | -40 °C to +105 °C | -40 °C to +125 °C | -40 °C to +125 °C | -40 °C to +105 °C |
| Tape & Reel (R suffix) | Yes | No (L suffix - tray) | Yes (R suffix) | No (G suffix - tray) | Yes (R suffix) | Yes (R suffix) |
Ana Farklılayıcılar
- AEC-Q100 qualified for -40 to +105 °C automotive operation (karşılaştırma:S912XEG384J2VAL (lower temp grade))
- XGATE peripheral co-processor for offloaded interrupt handling (karşılaştırma:S12XE variants without XGATE)
- Same 112-LQFP footprint enabling drop-in upgrade path (karşılaştırma:S912XET256W1MAA (80-QFP))
Tasarım Notları
The S912XEG384BVALR operates from a single 1.8 V supply but tolerates 5 V on most digital I/O pins. Use a 1.8 V low-dropout regulator with at least 150 mA capacity for the MCU plus 50 mA headroom for ADC reference. Add a 100 nF decoupling capacitor close to each VDDR pin and a bulk 4.7 µF tantalum on the main supply rail. For automotive battery transients, place a TVS diode at the 12 V input and an LC pi-filter before the LDO to suppress load-dump and jump-start events.
At 50 MHz, the S912XE draws approximately 60–80 mA from VDDR, dissipating 110–145 mW at 1.8 V. The 112-LQFP has a thermal resistance around 50 °C/W, producing 5–8 °C rise at room temperature - well within automotive ambient up to +105 °C. For underhood +125 °C operation, derate switching frequency or use the S12XE automotive temperature grade variant.
Route external bus signals (ADDR/DATA) with controlled-impedance traces and parallel termination to avoid bus contention. Keep analog ADC inputs separated from digital switching traces with a ground moat. Place the 4.7 µF decoupling cap within 5 mm of each analog supply pin to suppress ADC noise coupling.
Flash page erase granularity is required when writing firmware - if the page is smaller than your write buffer, you must read-erase-modify-write. The XGATE co-processor requires its own firmware image in Flash, separate from the main CPU image. Do not power the MCU without asserting RESET during VDDR ramp or you risk Flash corruption; use a supervisor IC.
Uyumluluk Bilgisi
AEC-Q100 qualified per NXP product page. RoHS compliant. Halogen-free status not explicitly stated in retrieved web data.
