Texas Instruments

SN74LS243D - 4-Bit Bus Transceiver | Texas Instruments

MPN: SN74LS243D ✓ Aktif
5 V Vdss 14-pin SOIC Package
MOQ: 1 |

SN74LS243D Genel Bakış

The Texas Instruments SN74LS243D is a non-inverting, 4-bit, quad bus transceiver with push-pull output in a 14-pin SOIC package. The device provides four transceiver elements, operates from a 5 V supply, and supports two-way asynchronous communication between data buses. It is designed for terminated lines down to 133 ohms.

A bus transceiver is an interface circuit that allows data to move in either direction between a host logic system and an external bus. The quad designation indicates four independently controlled transceiver elements, while the 4-bit designation identifies the parallel data width associated with those elements. Together, these features place the SN74LS243D in the logic IC > interface IC > bus transceiver hierarchy.

The SN74LS243D combines four bidirectional transceiver elements with non-inverting push-pull outputs. According to the Texas Instruments product page, the SN74LS243 family can drive terminated lines down to 133 ohms. The SN74LS243 commercial-temperature version is characterized for operation from 0°C to 70°C. Its SOIC-14 package supports conventional surface-mount PCB assembly.

The device is intended for asynchronous two-way bus communication, allowing each associated data path to operate as an input or output. Its push-pull output structure is appropriate for digital systems that require defined output levels and balanced drive capability. Because the communication path is bidirectional, system designers must control the transceiver direction through associated interface logic and account for signal timing at both ends of the bus.

Typical uses include instrumentation buses, computer peripherals, industrial data exchange, test equipment, and embedded control systems. The 14-pin package simplifies routing compared with larger 8-bit bus transceivers, while the four-element arrangement can cover four data paths when the full bus width is not required. The same organization can also be used in bidirectional buffering arrangements where a host processor communicates with a peripheral over shared conductors.

When laying out a board, keep the transceiver near the connector or bus interface, provide a low-impedance ground plane, and place input and output decoupling capacitors close to the supply pins. Check the datasheet pin-description table for the exact direction-control and data-pin assignments before assigning PCB tracks. The 133-ohm line requirement also means that cable or board transmission-line characteristics must be considered rather than treating every connection as an ideal point-to-point link.

This product page organizes the manufacturer specifications, source documents, procurement path, and practical replacement considerations into one engineering reference. It also highlights where a design can reuse the 14-SOIC footprint and where a full pin-by-pin comparison remains necessary before substituting a part from another supplier.

Drop-in alternatifler için SN74LS243D — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

SN74LS243D

✅ Yerleştirme
Texas Instruments
📦 14-SOIC
Quad 4-bit bus transceiver · 4 transceivers · 4 bits · Non-inverting · Push-pull · Asynchronous, two-way · 5 V · 133 ohms

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

SN74LS243D

✅ Yerleştirme
Texas Instruments
📦 14-SOIC
Quad 4-bit bus transceiver · 4 transceivers · 4 bits · Non-inverting · Push-pull · Asynchronous, two-way · 5 V · 133 ohms

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

SN74LS243D Özellikler

Product Type Quad 4-bit bus transceiver
Number of Elements 4 transceivers
Bits per Element 4 bits
Logic Polarity Non-inverting
Çıkış Türü Push-pull
Communication Mode Asynchronous, two-way
Besleme Gerilimi 5 V
Minimum Terminated Line Load 133 ohms
Commercial Operating Temperature 0°C to 70°C
Military Operating Temperature Reference -55°C to 125°C for SN54LS243
Paket 14-pin SOIC
Montaj Türü Surface mount
Packaging Form Tube

SN74LS243D 14-pin soic Pin Yapısı Kılavuzu

SN74LS243D (14-pin soic paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.

14-pin soic paket pin çizelgesi için SN74LS243D

Ayrıntılı pin çıkış verisi mevcut değil: SN74LS243D.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

SN74LS243D için uygundur 6 uygulamas: Asynchronous Instrument Bus Interface, Embedded Controller Peripheral Bus, Computer Peripheral Data Port, Industrial Control Data Exchange, Test and Measurement Equipment, General-Purpose Logic Data Link.

🔧

Asynchronous Instrument Bus Interface

The SN74LS243D fits an asynchronous two-way bus between an instrument controller and a peripheral because it combines four 4-bit transceiver elements with non-inverting push-pull outputs. According to the Texas Instruments product page, the family supports terminated lines down to 133 ohms. Place the device between the controller’s data lines and the bus connector, then use the associated direction and enable controls to prevent opposing drivers from operating simultaneously. The 5 V supply arrangement supports LS-family logic, while the 14-SOIC package keeps the interface compact enough for instrumentation and test equipment. Timing across the two bus directions should be checked against the peripheral’s turnaround requirements.

🏭

Embedded Controller Peripheral Bus

The SN74LS243D can connect a small controller subsystem to a peripheral board when four related data paths are sufficient for the required bus width. Its four transceiver elements, each described as 4-bit per element, provide a compact bidirectional interface rather than requiring four separate single-channel devices. The non-inverting push-pull output supports deterministic 5 V LS logic signaling, and the manufacturer identifies the family for asynchronous two-way communication. Direction-control sequencing is the primary design consideration: the controller must ensure that only one side drives each shared path at a time.

🖥️

Computer Peripheral Data Port

The SN74LS243D is appropriate for a legacy peripheral port that needs a compact bidirectional interface between a host bus and external logic. Four transceiver elements in one 14-SOIC package reduce the component count compared with separate buffers, while non-inverting push-pull operation preserves the positive logic polarity of LS TTL signals. The Texas Instruments product page states that the family can drive terminated lines down to 133 ohms, making line termination an explicit part of the interface design. A peripheral implementation should also observe setup and hold requirements around direction changes to avoid bus contention.

⚡

Industrial Control Data Exchange

The SN74LS243D can support short-distance asynchronous data exchange between an industrial controller card and a remote I/O module when the ambient environment stays within the commercial 0°C to 70°C range. Its four-element bidirectional organization is useful for separating the controller from a bus connector and for improving interface drive behavior. The manufacturer identifies the SN74LS243 as a 5 V device capable of driving terminated lines down to 133 ohms. In an industrial enclosure, solid grounding, connector shielding, and controlled direction sequencing are important, while any wider-temperature requirement calls for a suitably characterized device.

🔧

Test and Measurement Equipment

The SN74LS243D is useful in test and measurement equipment that exchanges control and status data with an external fixture or instrument. The four-element arrangement can consolidate multiple bidirectional links, and the 14-SOIC package supports conventional surface-mount routing. According to the Texas Instruments product page, the circuit is intended for asynchronous two-way bus communications and terminated lines down to 133 ohms. Place the device near the fixture connector to minimize trace exposure, provide local supply bypassing, and use the data sheet timing information when sequencing control and measurement commands.

🧩

General-Purpose Logic Data Link

The SN74LS243D can be used as a general-purpose bidirectional logic data link when a system needs more than one non-inverting transceiver element but does not require a full-width 8-bit bus device. Its 5 V operation, 4-bit element organization, and push-pull outputs fit classic LS-family interface arrangements. The implementation should provide defined enable and direction states before data is transmitted, and it should avoid driving two push-pull outputs onto the same conductor simultaneously. Using a continuous ground plane and positioning the transceiver close to the interface connector will help maintain signal integrity on the asynchronous bus.

Önerilen Ürünler Özeti

SN74LS243D Texas Instruments Kullanıldığı Yer: Asynchronous Instrument Bus Interface, Embedded Controller Peripheral Bus, Computer Peripheral Data Port, Industrial Control Data Exchange, Test and Measurement Equipment, General-Purpose Logic Data Link SN74LS243 Same SN74LS243 transceiver family Kullanıldığı Yer: Asynchronous Instrument Bus Interface, Embedded Controller Peripheral Bus, Computer Peripheral Data Port, Industrial Control Data Exchange, Test and Measurement Equipment, General-Purpose Logic Data Link
Where to buy SN74LS243D online?
The SN74LS243D can be requested through the Request a Quote form on this page. The form is the appropriate procurement path for checking current availability, order quantities, and lead time without relying on a stale catalog listing. The manufacturer product page and datasheet can also be used to confirm the electrical function, package, temperature grade, and ordering information before the purchase order is placed.
What is the price of SN74LS243D?
Use the Request a Quote form on this page to obtain the current unit price and volume pricing for the SN74LS243D. Because commercial availability and contract pricing can change, the quote form provides the appropriate channel for current commercial terms. The device is specified as a 14-pin SOIC quad bus transceiver, so the requested MPN should include the SN74LS243D suffix to preserve the correct package configuration.
What is the lead time for SN74LS243D?
The current lead time for SN74LS243D should be confirmed through the Request a Quote form on this page. Texas Instruments lists the SN74LS243 family on its product page, and distributor listings identify the SN74LS243D in a 14-SOIC configuration, but procurement timing can vary with order volume and inventory. Submit the required quantity and target date with the quote request for the most useful response.
Is SN74LS243D in stock?
Current SN74LS243D stock should be checked through the Request a Quote form on this page. The product page and distributor records identify the part as an active 14-SOIC bus transceiver, but the presence of a catalog record does not by itself guarantee a specific warehouse quantity. The quote request allows purchasing staff to confirm availability, minimum order quantity, and the expected delivery schedule.
What are the key specifications of SN74LS243D that engineers should know?
The SN74LS243D is a 4-element, 4-bit-per-element, non-inverting bus transceiver with push-pull output in a 14-pin SOIC package. According to the Texas Instruments product page, it is designed for asynchronous two-way bus communication, operates from a 5 V supply, and can drive terminated lines down to 133 ohms. The commercial SN74LS243 is specified from 0°C to 70°C.
What is the operating voltage of SN74LS243D?
The SN74LS243D operates from a 5 V supply. This makes it a 5 V bipolar TTL-family logic device and requires a supply rail compatible with the system’s LS logic levels. According to the Texas Instruments product page, the SN74LS243 commercial-temperature version is characterized for operation from 0°C to 70°C. Use the manufacturer data sheet for the complete absolute maximum ratings and recommended operating conditions.
What is the difference between SN74LS243D and SN74LS243N?
The principal documented difference is the package configuration: SN74LS243D is the 14-SOIC ordering option, while SN74LS243N uses the through-hole 14-pin DIP package. They belong to the same SN74LS243 four-data-line transceiver family, but the different lead geometry means SN74LS243N is not a pin-compatible drop-in replacement for a board designed around SN74LS243D. PCB footprint selection must follow the exact ordering suffix.
SN74LS243D vs SN74LS244D - which is better for a bus interface?
The SN74LS243D and SN74LS244D serve related bus-interface roles, but they are not interchangeable without checking their enable and output-control behavior in the manufacturer data sheet. The SN74LS243D is identified as a non-inverting four-element transceiver with push-pull output, while the SN74LS244D has different control characteristics. Choose according to the required direction, enable, and bus-topology functions rather than package similarity alone.
When should I choose SN74LS243D over another bus transceiver?
Choose the SN74LS243D when the design needs four bidirectional 4-bit transceiver elements, non-inverting push-pull operation, and a 14-pin SOIC footprint. It is appropriate for asynchronous two-way communication between a controller and a peripheral bus. Select another device when the system requires a different data width, common versus individual direction control, inverted logic, different voltage family, or a package other than 14-pin SOIC.
Is SN74LS243D suitable for an industrial control board?
The SN74LS243D is suitable when the board’s ambient temperature remains within its characterized 0°C to 70°C range and the interface uses compatible 5 V LS logic levels. Its four-element, bidirectional organization can support asynchronous controller-to-peripheral communication. For wider temperature requirements, the system needs a device explicitly characterized for that environment, and the completed circuit must still meet applicable industry and customer compliance requirements.
What can replace SN74LS243D?
A replacement for SN74LS243D must provide four compatible transceiver elements, non-inverting push-pull behavior, the same enable and direction-control arrangement, and a 14-pin SOIC footprint. The 14-SOIC SN74LS243D records associated with NXP and legacy Motorola manufacturing provide the most direct starting points for comparison. Confirm pin assignments, propagation delay, supply voltage, drive capability, temperature range, and lifecycle status before approving a substitution.
Is SN74LS243D the same as SN74LS243D from another manufacturer?
The same SN74LS243D marking can represent devices originally manufactured by Texas Instruments and other historical suppliers, but identical naming does not by itself guarantee production equivalence. The function, 14-SOIC pinout, voltage levels, timing, and electrical limits must be checked against the relevant manufacturer document. The NXP and Motorola records are useful starting points for a controlled second-source review rather than evidence of indiscriminate interchangeability.
Where to download the SN74LS243D datasheet PDF?
The official Texas Instruments datasheet can be downloaded from https://www.ti.com/lit/gpn/sn74ls243. The manufacturer product page at https://www.ti.com/product/SN74LS243 provides ordering, quality, and family information. Use the pin-description table, recommended operating conditions, and logic diagrams in the manufacturer document when assigning the 14-SOIC footprint and validating a replacement.
Where can I find the SN74LS243D pinout?
The SN74LS243D pinout is found in the pin-description table and package drawing in the Texas Instruments SN74LS243 data sheet. The verified part listing identifies a 14-SOIC package, but the exact signal-to-pin assignment is not reproduced in the search excerpts. Use the manufacturer document to map each data, direction-control, power, and ground connection before laying out the PCB or checking a substitute.
How should SN74LS243D be used with a terminated bus?
Place the SN74LS243D at the interface between the host logic and the external bus, configure the direction and enable controls correctly, and ensure the connected line is designed for operation down to 133 ohms. The Texas Instruments product page specifically identifies 133-ohm terminated-line drive capability. Account for propagation delay, bus loading, grounding, connector return paths, and the possibility of contention when multiple drivers can be active.

Mühendislik referans verileri: SN74LS243D — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the SN74LS243D when the system requires four bidirectional, non-inverting, 4-bit transceiver elements in a 14-SOIC package and operates from a 5 V LS-family supply. It is particularly suitable for asynchronous two-way communication over terminated lines down to 133 ohms. Select the NXP- or Motorola-associated SN74LS243D records as second-source candidates only after checking the complete pinout, timing, temperature grade, electrical limits, and lifecycle status. Do not select SN74LS243N for an existing 14-SOIC PCB because its 14-DIP package is not pin-compatible. Likewise, choose a different interface IC when the design needs inverted logic, eight data bits per direction, a different voltage family, or different direction-control architecture. For new production, verify that the selected manufacturer maintains the exact ordering option and documentation required by the customer’s qualification process.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün SN74LS243D SN74LS243D
Package 14-SOIC 14-SOIC 14-SOIC
Brand Texas Instruments NXP Semiconductors Motorola
Product Type Quad bus transceiver Bus transceiver Bus transceiver
Number of Elements 4 transceivers 4 transceivers 4 transceivers
Bits per Element 4 bits 4 bits 4 bits
Supply Voltage 5 V 5 V 5 V
Communication Mode Asynchronous, two-way Asynchronous, two-way Asynchronous, two-way
Minimum Terminated Line Load 133 ohms 133 ohms 133 ohms

Ana Farklılayıcılar

  • Combines four bidirectional transceiver elements in one 14-SOIC device (karşılaştırma:SN74LS243N)
  • Supports terminated asynchronous bus lines down to 133 ohms (karşılaştırma:SN74LS244D)
  • Non-inverting push-pull interface preserves positive LS logic polarity (karşılaştırma:SN74LS240D)

Tasarım Notları

Confirm the direction and enable truth table before assigning control pins. Bidirectional push-pull transceivers can create a direct output conflict if two sides drive the same bus conductor at the same time. Use external control logic or a defined controller state machine to guarantee a transition through the high-impedance or disabled state before the opposite side becomes active.

Place the SN74LS243D close to the bus connector or cable interface and provide a continuous ground reference beneath the device and connected bus traces. Keep supply-decoupling components near the power and ground connections and avoid routing sensitive signals beneath or parallel to long high-current return paths. The exact pin assignments should be taken from the manufacturer pin-description table before finalizing the layout.

The manufacturer identifies capability for terminated lines down to 133 ohms, so the PCB or cable network must use a compatible termination strategy. Account for driver strength, trace and connector loss, stub length, and the propagation delay of the selected transceiver. Avoid simultaneous data transitions on adjacent parallel lines when skew could violate setup and hold requirements at the receiving endpoint.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

Compliance declarations were not identified in the available manufacturer product-page and distributor excerpts. Verify the current material, environmental, and quality declarations for the selected manufacturer ordering code before production release.

Veri doğrulanma tarihi: 2026-11-14 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

SN74LS243D datasheet SN74LS243D pinout SN74LS243D datasheet pdf SN74LS243D equivalent SN74LS243D replacement SN74LS243D cross reference SN74LS243D footprint SN74LS243D price SN74LS243D stock Texas Instruments SN74LS243D SN74LS243D 4-bit bus transceiver SN74LS243D 14-SOIC pinout SN74LS243D asynchronous bus interface SN74LS243D vs SN74LS244D

İlgili Bileşenler ve Terimler

Texas Instruments SN74LS243D SN74LS243 SN74LS243N SN74LS244D SN74LS240D NXP Semiconductors Motorola quad bus transceiver interface IC logic IC semiconductor non-inverting transceiver push-pull output bidirectional data path asynchronous bus terminated line 133 ohms 5 V logic SOIC-14 surface-mount package QFN family temperature range signal integrity bus contention
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle