STMicroelectronics

STM32L051R6T6 - 32MHz Cortex-M0+ MCU | STMicroelectronics

MPN: STM32L051R6T6 ✓ Aktif
2.5 V or 3.3 V Vdss 64-LQFP (10 x 10 mm) Package 32 MHz Speed 32 KB (32K x 8 bits) Memory
MOQ: 1 |

STM32L051R6T6 Genel Bakış

The STMicroelectronics STM32L051R6T6 is an ultra-low-power 32-bit microcontroller built around an Arm Cortex-M0+ RISC core operating at 32 MHz, with 32 KB of Flash memory in a 64-pin LQFP package measuring 10 x 10 mm. It is designed for compact, low-power embedded systems operating from 2.5 V or 3.3 V supplies.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals on one device. The STM32L0 series belongs to the Arm Cortex-M microcontroller hierarchy and targets energy-efficient control applications. Its low-power architecture supports battery-powered sensing, portable instruments, industrial controls, and connected equipment where both processing capability and standby consumption matter.

Key characteristics include 32-bit instruction processing, a 32 MHz maximum clock, 32 KB of Flash program memory, and a 64-LQFP surface-mount package. The 32 KB Flash capacity provides sufficient space for compact firmware, while the 10 x 10 mm package supports space-constrained boards. Operation at 2.5 V and 3.3 V aligns the device with conventional embedded and industrial supply rails.

The STM32L051R6T6 uses the Arm Cortex-M0+ architecture, which provides a compact instruction set designed for microcontrollers rather than application processors. This architecture balances processing efficiency with low implementation overhead. The 32 MHz clock rate supports responsive control loops and communication tasks, while the STM32L0 power-management features are intended to reduce energy use during inactive periods.

Typical applications include low-power sensor nodes, battery-operated measurement equipment, access-control terminals, compact industrial controllers, portable medical or diagnostic devices, and IoT-connected products. In these systems, the microcontroller can consolidate multiple peripheral functions into a single device while using low-power operating modes when continuous processing is unnecessary.

PCB design should preserve the pin assignments and electrical characteristics shown in the manufacturer pin-definition table. Confirm the intended oscillator, decoupling, reset, and programming connections before layout release. Firmware compatibility between related STM32L0 devices must be evaluated through the manufacturer’s device migration and peripheral documentation rather than assumed from package similarity alone.

This page combines the manufacturer product information with package-level comparison data, drop-in candidates, sourcing guidance, and practical design notes. It helps engineers distinguish same-footprint alternatives from devices that also require changes to firmware, clock configuration, peripherals, or board layout.

Drop-in alternatifler için STM32L051R6T6 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller STM32L051R6T6 (aynı form faktörü ve ayağa oturma) — farklı olan Flash Memory, Product Type, ADC, Architecture, DAC.

STMicroelectronics
Flash Memory: 32 KB (32K x 8)
ADC: 12-bit ADC
Architecture: ARM 32-bit
İle Karşılaştır STM32L051R6T6 →
STMicroelectronics
Flash Memory: 32 KB (32K x 8)
Product Type: 32-bit ultra-low-power ARM Cortex-M0+ microcontroller
İle Karşılaştır STM32L051R6T6 →
STMicroelectronics
ADC: 12-bit with hardware oversampling up to 16-bit resolution
DAC: 12-bit
İle Karşılaştır STM32L051R6T6 →

STM32L052R6T6

✅ Yerleştirme
STMicroelectronics
📦 64-LQFP (10 x 10 mm)
STMicroelectronics · 32-bit ultra-low-power microcontroller · Arm Cortex-M0+ · ARM 32-bit · 32 MHz · 32 KB (32K x 8) · 8 KB · 2 KB

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

STM32L053R6T6

✅ Yerleştirme
STMicroelectronics
📦 64-LQFP (10 x 10 mm)
32-bit ultra-low-power ARM Cortex-M0+ microcontroller · 32 MHz · 32 KB (32K x 8) · 8 KB · 1.65 V to 3.6 V · 2.5 V / 3.3 V · ARM Cortex-M0+ · 32 bit

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

STM32L053R8T6

✅ Yerleştirme
STMicroelectronics
📦 64-LQFP (10 x 10 mm)
ARM Cortex-M0+ · 32-bit · 32 MHz · 64 KB (64K x 8) · 8 KB · 1.8 V to 3.6 V (BOR enabled; down to 1.65 V in power-down without BOR) · -40 C to +125 C · 64-LQFP (10x10 mm)

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

STM32L071R6T6

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 64-LQFP (10 x 10 mm)
Same 32 MHz Cortex-M0+ performance class and LQFP-64 footprint; peripheral and memory details must be confirmed

📋 Katalogda Olmayan Referans Alternatifi

STM32L072R6T6

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 64-LQFP (10 x 10 mm)
Same 32 MHz Cortex-M0+ performance class and 64-pin LQFP footprint; memory and peripheral differences require verification

📋 Katalogda Olmayan Referans Alternatifi

STM32L051R6T6 Maksimum Değerlendirmeler & Elektriksel Özellikler

Product Type 32-bit ultra-low-power microcontroller
Processor Core Arm Cortex-M0+ RISC
Azami Saat Hızı 32 MHz
Flash Memory 32 KB (32K x 8 bits)
İşletim Besleme Gerilimi 2.5 V or 3.3 V
Architecture 32-bit Arm RISC
Pin Sayısı 64 pins
Paket 64-LQFP (10 x 10 mm)
Montaj Türü Surface mount
Shipping Format Tray

STM32L051R6T6 64-lqfp (10 x 10 mm) Pin Yapısı Kılavuzu

STM32L051R6T6 (64-lqfp (10 x 10 mm) paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.

64-lqfp (10 x 10 mm) paket pin çizelgesi için STM32L051R6T6

Ayrıntılı pin çıkış verisi mevcut değil: STM32L051R6T6.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

STM32L051R6T6 için uygundur 6 uygulamas: Battery-Powered Sensor Nodes, Industrial Control and Monitoring, Portable Medical and Diagnostic Devices, Access-Control and Security Terminals, Compact IoT Connectivity Modules, Portable Instrumentation and Test Equipment.

🧩

Battery-Powered Sensor Nodes

The STM32L051R6T6 fits battery-powered sensor nodes that periodically sample a sensor, process the measurement, and return to a low-power state. Its 32 MHz Arm Cortex-M0+ core provides enough performance for control logic and communication tasks, while the ultra-low-power STM32L0 platform targets energy-conscious designs. The 32 KB of Flash supports compact application firmware, while the 64-LQFP package keeps the footprint to 10 x 10 mm. Designers should review run, stop, and standby current from the manufacturer electrical data and use the device’s low-power modes to determine the achievable duty cycle and battery life.

🏭

Industrial Control and Monitoring

The STM32L051R6T6 can serve as the central controller in compact industrial monitoring equipment, where it must read sensors, manage digital inputs, control outputs, and record operating events. Its 32-bit Cortex-M0+ architecture and 32 MHz clock support responsive multitasking and protocol handling, while 2.5 V or 3.3 V operation fits conventional embedded supply rails. The 64-LQFP package also provides a substantial pin count for peripheral connections on a compact board. Firmware must be checked against the exact peripheral set, and the design should include appropriate isolation, surge protection, and environmental protection outside the microcontroller package.

💊

Portable Medical and Diagnostic Devices

The STM32L051R6T6 is suitable for portable measurement and diagnostic peripherals that combine sensor conditioning, digital signal processing, status indication, and low-power operation. A 32 MHz Cortex-M0+ core can execute the control and filtering functions required by compact instruments, while 32 KB of Flash stores application code and calibration parameters. Operation from 2.5 V or 3.3 V simplifies integration with battery and regulated power subsystems. Medical designs still require independent validation of accuracy, electrical safety, EMC performance, and applicable documentation; the MCU qualification alone does not establish compliance for the finished medical product.

🔒

Access-Control and Security Terminals

The STM32L051R6T6 fits access-control readers, keypads, and compact security terminals that must process input events and manage communication in a small enclosure. Its 32-bit Cortex-M0+ core operates at up to 32 MHz, providing responsive handling of local user-interface tasks and serial protocols, while 32 KB of Flash accommodates a focused embedded application. The 64-pin LQFP package offers a practical balance between connection capacity and board area. Production firmware should include secure update procedures, appropriate peripheral protection, and event logging; interface timing and available peripherals must be verified for the selected replacement device.

🌐

Compact IoT Connectivity Modules

The STM32L051R6T6 can serve as the low-power application controller in a compact IoT module, handling local configuration, sensor fusion, user commands, and data preparation before a network radio transmits results. Its 32 MHz Cortex-M0+ core and 32 KB Flash provide adequate capacity for focused firmware, while the low-power architecture is well matched to intermittently connected equipment. The 10 x 10 mm LQFP package permits integration with wireless circuitry on a dense board. Designers should confirm the required UART, SPI, I2C, timer, and ADC resources in the manufacturer peripheral tables and calculate radio activity, sampling rates, and sleep modes to estimate energy use.

🖥️

Portable Instrumentation and Test Equipment

The STM32L051R6T6 is appropriate for compact handheld instruments that acquire measurements, drive displays, operate controls, and communicate with a host computer. The 32-bit Cortex-M0+ processor at 32 MHz can handle sampling coordination and control logic, and the 32 KB Flash provides room for a purpose-built firmware image. Its 2.5 V or 3.3 V operating class supports common portable-system rails, while the 64-pin LQFP package exposes enough connections for sensors and human-interface circuitry. Accurate analog measurements still depend on the device’s ADC characteristics, reference design, calibration procedure, and layout; these details must be taken from the manufacturer documentation.

Önerilen Ürünler Özeti

STM32L052R6T6 STMicroelectronics Kullanıldığı Yer: Battery-Powered Sensor Nodes, Portable Medical and Diagnostic Devices, Compact IoT Connectivity Modules STM32L071R6T6 Same-package STM32L0 candidate for low-power control Kullanıldığı Yer: Battery-Powered Sensor Nodes, Portable Medical and Diagnostic Devices STM32L053R6T6 STMicroelectronics Kullanıldığı Yer: Industrial Control and Monitoring, Access-Control and Security Terminals, Compact IoT Connectivity Modules, Portable Instrumentation and Test Equipment STM32L072R6T6 Same-package STM32L0 candidate for expanded control functions Kullanıldığı Yer: Industrial Control and Monitoring, Access-Control and Security Terminals, Portable Instrumentation and Test Equipment
What are the key specifications of STM32L051R6T6 that engineers should know?
The STM32L051R6T6 is a 32-bit ultra-low-power microcontroller with a 32 MHz Arm Cortex-M0+ core, 32 KB of Flash memory, and a 64-pin LQFP package measuring 10 x 10 mm. According to the STMicroelectronics product page, it is designed for 2.5 V or 3.3 V operation. Its combination of a 32 MHz clock, compact footprint, and low-power architecture makes it suitable for embedded controls, sensing equipment, and compact access-control systems.
Where can I download the STM32L051R6T6 datasheet PDF?
The official STM32L051R6T6 technical documentation is available through the STM32L051R6 product page at STMicroelectronics. Open the datasheet link on that page to obtain the manufacturer PDF, including electrical characteristics, pin definitions, package drawings, memory maps, and peripheral descriptions. Use the manufacturer document for board layout and firmware decisions because third-party copies may not include the latest revision or supporting application notes.
Where can I find the STM32L051R6T6 pinout?
The STM32L051R6T6 pinout is found in the pin-description table of the manufacturer datasheet and the package information published on the STM32L051R6 product page. The device uses a 64-pin LQFP package with a 10 x 10 mm body. Use the pin-definition table when assigning power, ground, reset, oscillator, programming, and peripheral connections; a package drawing alone does not identify the electrical function of every pin.
Is the STM32L051R6T6 suitable for low-power battery applications?
The STM32L051R6T6 is suitable for low-power embedded applications because it belongs to STMicroelectronics’ ultra-low-power STM32L0 access-line family. Its 32 MHz Arm Cortex-M0+ core provides responsive control capability without the power burden of a high-performance application processor. The exact battery-life result depends on the selected operating mode, clock configuration, peripheral activity, and firmware duty cycle.
What is the difference between STM32L051R6T6 and STM32L052R6T6?
The STM32L051R6T6 and STM32L052R6T6 are related STM32L0 devices in the same 64-pin LQFP class, with both identified as 32-bit Arm Cortex-M0+ microcontrollers operating at 32 MHz with 32 KB of Flash. The STM32L052R6T6 comparison identifies the same core, Flash capacity, voltage class, and package. Peripheral and firmware compatibility should still be confirmed in the manufacturer device documentation before substitution.
When should I choose STM32L051R6T6 over STM32L052R6T6?
Choose the STM32L051R6T6 when the design requires the STM32L0 access-line feature set without the additional functions associated with the STM32L052R6T6. Both provide the same stated 32 MHz Cortex-M0+ core, 32 KB Flash class, 2.5 V or 3.3 V operation, and 64-pin LQFP format. The preferred choice ultimately depends on required peripherals, peripheral mapping, qualification, and firmware support.
Is STM32L051R6T6 the same as STM32L053R6T6?
The STM32L051R6T6 and STM32L053R6T6 share the 64-pin LQFP format, 32 MHz Arm Cortex-M0+ architecture, 32 KB Flash configuration, and 2.5 V or 3.3 V operating class. They belong to the same STM32L0 product family, but exact peripheral availability and software support can differ. A PCB fit is therefore possible while firmware migration still requires device-by-device verification.
What is the best drop-in replacement for STM32L051R6T6?
The closest package-compatible candidates include the STM32L052R6T6 and STM32L053R6T6 because both use a 64-pin LQFP package and retain the 32 MHz Cortex-M0+ and 32 KB Flash configuration identified in manufacturer-related listings. No cross-manufacturer drop-in replacement is established by the manufacturer information. Treat package compatibility as only the first checkpoint and verify peripherals, interrupts, clocks, and firmware migration.
Can STM32L052R6T6 replace STM32L051R6T6 on an existing PCB?
The STM32L052R6T6 can fit the same 64-pin LQFP footprint and matches the stated 32 MHz Cortex-M0+ core and 32 KB Flash class of the STM32L051R6T6. A hardware replacement does not automatically guarantee a functional replacement. Review the peripheral list, pin multiplexing, memory map, interrupt configuration, and device support in the manufacturer documentation before approving the change.
Where can I buy STM32L051R6T6 online?
Use the Request a Quote form on this page to request STM32L051R6T6 availability, order quantities, and current commercial terms. The Request a Quote workflow provides a direct route for checking exact MPN coverage and supply status without relying on a static listing. Confirm the LQFP-64 package and tray shipping configuration when submitting the request.
What is the price of STM32L051R6T6?
The current commercial price for STM32L051R6T6 is obtained through the Request a Quote form on this page. Submit the required quantity and package or shipping details so the quote reflects current availability for the exact MPN. This avoids presenting an outdated benchmark against changing inventory, volume breaks, and lead-time conditions.
What is the lead time for STM32L051R6T6 and is it in stock?
Request current lead time and stock status for STM32L051R6T6 through the Request a Quote form on this page. Include the quantity, target tray configuration, and required delivery date. Because supply conditions change by volume and region, a date-specific response is more useful than treating a generic catalog or search listing as a firm availability commitment.
How much power does the STM32L051R6T6 use?
The STM32L051R6T6 consumes power according to its operating mode, clock configuration, supply voltage, and enabled peripherals. The manufacturer identifies the STM32L0 family as ultra-low-power and supports operation at 2.5 V or 3.3 V, but exact current values by mode were not identified in the product summary. Consult the manufacturer electrical-characteristics table for run, sleep, stop, and standby currents before sizing a battery.
Does STM32L051R6T6 support USB, CAN, and other communications interfaces?
The STM32L051R6T6 is an STM32L0-series microcontroller whose exact peripheral set must be checked in the manufacturer datasheet. The product summary confirms the 32 MHz Arm Cortex-M0+ core, 32 KB Flash, 64-LQFP package, and 2.5 V or 3.3 V operation, but it does not enumerate every communication peripheral. Review the official pin and peripheral tables before selecting it for USB, CAN, UART, SPI, or I2C requirements.
What programming and debugging tools are compatible with STM32L051R6T6?
The STM32L051R6T6 uses the Arm Cortex-M0+ debug and programming architecture supported by STMicroelectronics’ development ecosystem. Use the manufacturer’s programming and debug documentation to select the appropriate ST-LINK interface and software driver. Confirm boot configuration, SWD connections, supply levels, and firmware support for the exact device order code before integrating the toolchain.
Is STM32L051R6T6 suitable for IoT and battery-powered sensor nodes?
The STM32L051R6T6 is well suited to compact IoT sensor nodes and battery-powered products because it combines a 32 MHz Arm Cortex-M0+ processor, 32 KB Flash, and an ultra-low-power STM32L0 architecture in a 64-pin LQFP package. The product can consolidate sensing, control, and communications tasks. Actual runtime and battery life depend on sensor load, radio activity, sampling interval, and selected low-power modes.

Mühendislik referans verileri: STM32L051R6T6 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the STM32L051R6T6 when a compact 64-pin LQFP design requires a 32 MHz Arm Cortex-M0+ core, 32 KB Flash, and operation from 2.5 V or 3.3 V without requiring the expanded feature sets of related devices. Select the STM32L052R6T6 when its additional capabilities match the design while preserving the same stated core, memory, voltage, and package classes. Consider the STM32L053R6T6 for its related STM32L0 feature set and the STM32L053R8T6 when additional Flash headroom is useful. STM32L071R6T6 and STM32L072R6T6 are candidates only after their memory, peripherals, clocks, and firmware implications have been checked. Package fit alone does not establish functional equivalence, so validate each substitution against the manufacturer device documentation.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün STM32L052R6T6 STM32L053R6T6 STM32L053R8T6 STM32L071R6T6 STM32L072R6T6
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm) - same 64-LQFP (10 x 10 mm) - same 64-LQFP - same footprint 64-LQFP (10 x 10 mm) - same 64-LQFP (10 x 10 mm) - same
Processor Core Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+
Maximum Clock Frequency 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz
Instruction Set 32-bit Arm RISC 32-bit Arm RISC 32-bit Arm RISC 32-bit Arm RISC 32-bit Arm RISC 32-bit Arm RISC

Ana Farklılayıcılar

  • Direct match to the STM32L052R6T6 core and memory class (karşılaştırma:STM32L052R6T6)
  • Compatible footprint with the STM32L053R6T6 (karşılaştırma:STM32L053R6T6)
  • More Flash headroom in the STM32L053R8T6 (karşılaştırma:STM32L053R8T6)

Tasarım Notları

Assign the PCB footprint from the manufacturer’s 64-pin LQFP drawing and verify every signal against the STM32L051R6T6 pin-definition table. Place decoupling capacitors at the supply pins with short ground returns, and route high-speed or sensitive signals away from switching nodes. Use the manufacturer land pattern and soldering guidance for the exact 10 x 10 mm package rather than estimating dimensions from a generic LQFP footprint.

Design the 2.5 V or 3.3 V supply path so it remains stable across the MCU’s active and low-power operating states. Confirm bypass capacitance, startup behavior, and maximum supply limits against the manufacturer electrical-characteristics tables. When the MCU controls a sensor or radio, separate controllable loads from the core supply where practical so that a disabled peripheral does not prevent the processor rail from reaching its intended operating condition.

Do not treat a matching LQFP package as proof that two STM32L0 devices have identical behavior. Before substituting STM32L052R6T6, STM32L053R6T6, or another related part, compare peripheral availability, alternate-function mapping, interrupt vectors, clock tree, memory organization, boot options, and low-power behavior. Rebuild and retest firmware with the exact replacement part even when the board outline and core frequency match.

Keep the Arm debug programming interface accessible after assembly and follow the manufacturer recommendations for SWD signal routing and reset. If the design uses an external clock, ensure its startup and drive characteristics meet the STM32L051R6T6 requirements. Preserve short return paths for analog and digital grounds, and position sensitive measurement circuitry away from the MCU and external switching components to reduce coupled noise.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements were identified for this order code. The general STM32L0 device is not presented as an AEC-Q100-qualified automotive option.

Veri doğrulanma tarihi: 2026-11-19 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

STM32L051R6T6 datasheet STM32L051R6T6 pinout STM32L051R6T6 datasheet pdf STM32L051R6T6 specifications STM32L051R6T6 price STM32L051R6T6 stock STM32L051R6T6 equivalent STM32L051R6T6 replacement STM32L051R6T6 vs STM32L052R6T6 STM32L051R6T6 footprint STM32L051R6T6 application circuit STMicroelectronics STM32L051R6T6

İlgili Bileşenler ve Terimler

STMicroelectronics STM32L051R6T6 STM32L052R6T6 STM32L053R6T6 STM32L053R8T6 STM32L071R6T6 STM32L072R6T6 Arm Cortex-M0+ Arm Cortex-M microcontroller 32-bit RISC processor STM32L0 series ultra-low-power microcontroller embedded microcontroller 32 KB Flash memory 32 MHz clock 64-LQFP package LQFP package family surface-mount package 2.5 V power supply 3.3 V power supply battery-powered sensor node industrial monitoring IoT connectivity access-control terminal portable medical device
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle