STM32L051R6T6 - 32MHz Cortex-M0+ MCU | STMicroelectronics
부품 번호: STM32L051R6T6 ✓ 활성STM32L051R6T6 개요
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals on one device. The STM32L0 series belongs to the Arm Cortex-M microcontroller hierarchy and targets energy-efficient control applications. Its low-power architecture supports battery-powered sensing, portable instruments, industrial controls, and connected equipment where both processing capability and standby consumption matter.
Key characteristics include 32-bit instruction processing, a 32 MHz maximum clock, 32 KB of Flash program memory, and a 64-LQFP surface-mount package. The 32 KB Flash capacity provides sufficient space for compact firmware, while the 10 x 10 mm package supports space-constrained boards. Operation at 2.5 V and 3.3 V aligns the device with conventional embedded and industrial supply rails.
The STM32L051R6T6 uses the Arm Cortex-M0+ architecture, which provides a compact instruction set designed for microcontrollers rather than application processors. This architecture balances processing efficiency with low implementation overhead. The 32 MHz clock rate supports responsive control loops and communication tasks, while the STM32L0 power-management features are intended to reduce energy use during inactive periods.
Typical applications include low-power sensor nodes, battery-operated measurement equipment, access-control terminals, compact industrial controllers, portable medical or diagnostic devices, and IoT-connected products. In these systems, the microcontroller can consolidate multiple peripheral functions into a single device while using low-power operating modes when continuous processing is unnecessary.
PCB design should preserve the pin assignments and electrical characteristics shown in the manufacturer pin-definition table. Confirm the intended oscillator, decoupling, reset, and programming connections before layout release. Firmware compatibility between related STM32L0 devices must be evaluated through the manufacturer’s device migration and peripheral documentation rather than assumed from package similarity alone.
This page combines the manufacturer product information with package-level comparison data, drop-in candidates, sourcing guidance, and practical design notes. It helps engineers distinguish same-footprint alternatives from devices that also require changes to firmware, clock configuration, peripherals, or board layout.
드롭인 대체품: STM32L051R6T6 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: STM32L051R6T6 (동일 폼 팩터 및 풋프린트) — 차이점: Flash Memory, Product Type, ADC, Architecture, DAC.
STM32L052R6T6
✅ 드롭인가격 문의
데이터시트 보기 →STM32L053R6T6
✅ 드롭인가격 문의
데이터시트 보기 →STM32L053R8T6
✅ 드롭인가격 문의
데이터시트 보기 →STM32L071R6T6
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
STM32L072R6T6
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
STM32L051R6T6 최대 정격 & 전기적 특성
| Product Type | 32-bit ultra-low-power microcontroller |
| Processor Core | Arm Cortex-M0+ RISC |
| 최대 클록 주파수 | 32 MHz |
| Flash Memory | 32 KB (32K x 8 bits) |
| 동작 공급 전압 | 2.5 V or 3.3 V |
| Architecture | 32-bit Arm RISC |
| 핀 수 | 64 pins |
| 패키지 | 64-LQFP (10 x 10 mm) |
| 실장 유형 | Surface mount |
| Shipping Format | Tray |
STM32L051R6T6 64-lqfp (10 x 10 mm) 핀 구성 가이드
STM32L051R6T6(64-lqfp (10 x 10 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: STM32L051R6T6.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
STM32L051R6T6 적합 용도: 6 애플리케이션s: Battery-Powered Sensor Nodes, Industrial Control and Monitoring, Portable Medical and Diagnostic Devices, Access-Control and Security Terminals, Compact IoT Connectivity Modules, Portable Instrumentation and Test Equipment.
Battery-Powered Sensor Nodes
The STM32L051R6T6 fits battery-powered sensor nodes that periodically sample a sensor, process the measurement, and return to a low-power state. Its 32 MHz Arm Cortex-M0+ core provides enough performance for control logic and communication tasks, while the ultra-low-power STM32L0 platform targets energy-conscious designs. The 32 KB of Flash supports compact application firmware, while the 64-LQFP package keeps the footprint to 10 x 10 mm. Designers should review run, stop, and standby current from the manufacturer electrical data and use the device’s low-power modes to determine the achievable duty cycle and battery life.
추천
Industrial Control and Monitoring
The STM32L051R6T6 can serve as the central controller in compact industrial monitoring equipment, where it must read sensors, manage digital inputs, control outputs, and record operating events. Its 32-bit Cortex-M0+ architecture and 32 MHz clock support responsive multitasking and protocol handling, while 2.5 V or 3.3 V operation fits conventional embedded supply rails. The 64-LQFP package also provides a substantial pin count for peripheral connections on a compact board. Firmware must be checked against the exact peripheral set, and the design should include appropriate isolation, surge protection, and environmental protection outside the microcontroller package.
추천
Portable Medical and Diagnostic Devices
The STM32L051R6T6 is suitable for portable measurement and diagnostic peripherals that combine sensor conditioning, digital signal processing, status indication, and low-power operation. A 32 MHz Cortex-M0+ core can execute the control and filtering functions required by compact instruments, while 32 KB of Flash stores application code and calibration parameters. Operation from 2.5 V or 3.3 V simplifies integration with battery and regulated power subsystems. Medical designs still require independent validation of accuracy, electrical safety, EMC performance, and applicable documentation; the MCU qualification alone does not establish compliance for the finished medical product.
추천
Access-Control and Security Terminals
The STM32L051R6T6 fits access-control readers, keypads, and compact security terminals that must process input events and manage communication in a small enclosure. Its 32-bit Cortex-M0+ core operates at up to 32 MHz, providing responsive handling of local user-interface tasks and serial protocols, while 32 KB of Flash accommodates a focused embedded application. The 64-pin LQFP package offers a practical balance between connection capacity and board area. Production firmware should include secure update procedures, appropriate peripheral protection, and event logging; interface timing and available peripherals must be verified for the selected replacement device.
추천
Compact IoT Connectivity Modules
The STM32L051R6T6 can serve as the low-power application controller in a compact IoT module, handling local configuration, sensor fusion, user commands, and data preparation before a network radio transmits results. Its 32 MHz Cortex-M0+ core and 32 KB Flash provide adequate capacity for focused firmware, while the low-power architecture is well matched to intermittently connected equipment. The 10 x 10 mm LQFP package permits integration with wireless circuitry on a dense board. Designers should confirm the required UART, SPI, I2C, timer, and ADC resources in the manufacturer peripheral tables and calculate radio activity, sampling rates, and sleep modes to estimate energy use.
추천
Portable Instrumentation and Test Equipment
The STM32L051R6T6 is appropriate for compact handheld instruments that acquire measurements, drive displays, operate controls, and communicate with a host computer. The 32-bit Cortex-M0+ processor at 32 MHz can handle sampling coordination and control logic, and the 32 KB Flash provides room for a purpose-built firmware image. Its 2.5 V or 3.3 V operating class supports common portable-system rails, while the 64-pin LQFP package exposes enough connections for sensors and human-interface circuitry. Accurate analog measurements still depend on the device’s ADC characteristics, reference design, calibration procedure, and layout; these details must be taken from the manufacturer documentation.
추천
추천 제품 요약
엔지니어링 참조 데이터: STM32L051R6T6 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | STM32L052R6T6 | STM32L053R6T6 | STM32L053R8T6 | STM32L071R6T6 | STM32L072R6T6 |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) - same | 64-LQFP (10 x 10 mm) - same | 64-LQFP - same footprint | 64-LQFP (10 x 10 mm) - same | 64-LQFP (10 x 10 mm) - same |
| Processor Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum Clock Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Instruction Set | 32-bit Arm RISC | 32-bit Arm RISC | 32-bit Arm RISC | 32-bit Arm RISC | 32-bit Arm RISC | 32-bit Arm RISC |
주요 차별점
- Direct match to the STM32L052R6T6 core and memory class (vs STM32L052R6T6)
- Compatible footprint with the STM32L053R6T6 (vs STM32L053R6T6)
- More Flash headroom in the STM32L053R8T6 (vs STM32L053R8T6)
설계 노트
Assign the PCB footprint from the manufacturer’s 64-pin LQFP drawing and verify every signal against the STM32L051R6T6 pin-definition table. Place decoupling capacitors at the supply pins with short ground returns, and route high-speed or sensitive signals away from switching nodes. Use the manufacturer land pattern and soldering guidance for the exact 10 x 10 mm package rather than estimating dimensions from a generic LQFP footprint.
Design the 2.5 V or 3.3 V supply path so it remains stable across the MCU’s active and low-power operating states. Confirm bypass capacitance, startup behavior, and maximum supply limits against the manufacturer electrical-characteristics tables. When the MCU controls a sensor or radio, separate controllable loads from the core supply where practical so that a disabled peripheral does not prevent the processor rail from reaching its intended operating condition.
Do not treat a matching LQFP package as proof that two STM32L0 devices have identical behavior. Before substituting STM32L052R6T6, STM32L053R6T6, or another related part, compare peripheral availability, alternate-function mapping, interrupt vectors, clock tree, memory organization, boot options, and low-power behavior. Rebuild and retest firmware with the exact replacement part even when the board outline and core frequency match.
Keep the Arm debug programming interface accessible after assembly and follow the manufacturer recommendations for SWD signal routing and reset. If the design uses an external clock, ensure its startup and drive characteristics meet the STM32L051R6T6 requirements. Preserve short return paths for analog and digital grounds, and position sensitive measurement circuitry away from the MCU and external switching components to reduce coupled noise.
규정 준수 정보
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements were identified for this order code. The general STM32L0 device is not presented as an AEC-Q100-qualified automotive option.