STM32L552CCT6 - 110MHz Cortex-M33 MCU, 256KB Flash | STMicroelectronics
MPN: STM32L552CCT6 ✓ AktifSTM32L552CCT6 Genel Bakış
An ultra-low-power microcontroller is an embedded processing device designed to minimize energy use during active operation, sleep, and standby states. Within the broader semiconductor hierarchy, this product is a 32-bit microcontroller based on the Arm Cortex-M33 RISC core, part of the STM32L5 series, and intended for industrial, IoT, consumer, medical, and connected-product applications. Its combination of real-time control, serial connectivity, DMA, cryptographic trust, and energy-saving operating modes makes it suitable for systems that must remain responsive while consuming little power between events.
Key features include an Arm Cortex-M33 core operating up to 110 MHz, an FPU for efficient single-precision arithmetic, Arm TrustZone support, 256 KB of flash memory, and a family-level SRAM capacity of up to 256 KB. Peripheral connectivity includes CANbus, I2C, IrDA, LINbus, MMC/SD, QSPI, SAI, SPI, UART/USART, and USB. Brown-out detection and reset, DMA, and PWM capabilities support connected sensor, control, communications, and data-transfer designs.
The Cortex-M33 architecture provides a 32-bit instruction set, exception model, and secure execution environment while retaining the deterministic behavior expected from an embedded MCU. TrustZone separates secure and non-secure software, while the FPU accelerates floating-point workloads without relying on a separate math accelerator. The STM32L5 family supports up to 165 DMIPS, and its SMPS architecture helps optimize power-delivery requirements in low-energy designs. Exact device-level current, voltage, and temperature limits should be selected from the manufacturer electrical-characteristics tables.
Typical applications include battery-powered IoT sensors, industrial condition-monitoring nodes, secure wireless-device controllers, low-power data loggers, building automation endpoints, and compact consumer accessories. Interfaces such as SPI, I2C, UART/USART, CANbus, SAI, and USB allow the MCU to connect sensors, displays, transceivers, storage devices, and human-interface subsystems. Low-power operation is particularly valuable where the product must wake periodically, collect data, transmit results, and return to sleep.
Design the PCB around the 48-LQFP footprint, power architecture, decoupling strategy, and exposed debug/programming interface before committing the layout. Confirm the exact pin assignment, supply voltage, clock configuration, low-power current, and temperature grade in the STM32L552xx datasheet. When firmware depends on TrustZone partitioning or the SMPS configuration, validate the boot flow, peripheral ownership, and power-sequencing behavior on the final hardware.
This page combines the official STM32L552xx family specifications, exact STM32L552CCT6 package and memory details, sourcing guidance, and verified drop-in alternatives to support MCU selection, PCB planning, firmware bring-up, and second-source evaluation.
Drop-in alternatifler için STM32L552CCT6 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu ürüne yer değiştirme seçenekleri mevcut değil.
Alternatifleri Talep EdinSTM32L552CCT6 Maksimum Değerlendirmeler & Elektriksel Özellikler
| Product Type | Ultra-low-power 32-bit microcontroller |
| Core Processor | Arm Cortex-M33 |
| Core Architecture | 32-bit RISC |
| Maximum CPU Frequency | 110 MHz |
| Flash Memory | 256 KB |
| Family Maximum SRAM | 256 KB |
| Family Processing Performance | 165 DMIPS |
| Floating-Point Unit | Present |
| Security | Arm TrustZone |
| Power Architecture | SMPS |
| Paket | 48-LQFP, 7 x 7 mm |
| Montaj Türü | Surface mount |
| Connectivity | CANbus, I2C, IrDA, LINbus, MMC/SD, QSPI, SAI, SPI, UART/USART, USB |
| Core Count | 1 |
| Program Memory Type | Flash |
| Brown-Out Detection and Reset | Supported |
| DMA | Supported |
| PWM | Supported |
STM32L552CCT6 48-lqfp, 7 x 7 mm Pin Yapısı Kılavuzu
STM32L552CCT6 (48-lqfp, 7 x 7 mm paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: STM32L552CCT6.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
STM32L552CCT6 için uygundur 6 uygulamas: Battery-Powered IoT Sensor Nodes, Industrial Condition Monitoring, Secure Connected Device Controller, Low-Power Data Loggers, Building Automation Endpoints, Compact Consumer and Wearable Electronics.
Battery-Powered IoT Sensor Nodes
The STM32L552CCT6 fits battery-powered IoT sensor nodes that periodically wake, acquire measurements, process them locally, and transmit results. Its 110 MHz Arm Cortex-M33 core provides useful control performance while the STM32L5 family's ultra-low-power focus supports energy-conscious designs. The 256 KB of flash accommodates firmware, protocol stacks, and configuration data, while I2C and SPI connect common sensors and radio modules. UART/USART or USB can support recovery and wired commissioning. Battery-life calculations should use the exact device low-power currents, regulator efficiency, radio duty cycle, and sensor load from the final system design.
Önerilen
Industrial Condition Monitoring
The STM32L552CCT6 is suitable for industrial condition-monitoring equipment that combines motor, vibration, temperature, or acoustic sensing with local edge processing. Its Cortex-M33 core supports responsive filtering and event handling at up to 110 MHz, and the FPU assists with floating-point signal calculations. RS-485-capable UART/USART links, CANbus, SPI, and I2C support sensors and plant networks, while DMA reduces interrupt overhead during continuous transfers. Brown-out detection and reset improve recovery from unstable industrial supplies. Production qualification should include the exact temperature grade, isolation architecture, grounding, and EMC requirements.
Önerilen
Secure Connected Device Controller
The STM32L552CCT6 fits secure connected-device controllers that must isolate firmware, authenticate peripherals, and manage low-power communications. Arm TrustZone provides a hardware-assisted boundary between secure and non-secure software, while the 110 MHz Cortex-M33 core supports protocol processing and real-time control. Its 256 KB of flash provides room for secure boot code, application firmware, and communication stacks. USB, QSPI, SPI, and UART/USART support external storage, radios, and service interfaces. Security claims should be validated through the complete firmware architecture, key-management plan, debug-lock configuration, and TrustZone partitioning rather than by the MCU model name alone.
Önerilen
Low-Power Data Loggers
The STM32L552CCT6 can act as the central controller in a low-power environmental or fleet data logger. Its 256 KB of flash supports firmware and local buffering, and the STM32L5 low-power architecture is well suited to designs that spend most of their time in a reduced-power state. I2C handles environmental sensors, SPI supports higher-bandwidth storage or radio devices, and UART/USART provides a simple configuration channel. The FPU assists with calibration and filtering. Storage endurance, timestamp accuracy, write wear leveling, and battery capacity must be evaluated together because frequent logging can dominate the energy budget even when the MCU itself is efficient.
Önerilen
Building Automation Endpoints
The STM32L552CCT6 is appropriate for compact building-automation endpoints that coordinate environmental sensors, lighting controls, and wired communications. Its low-power design focus benefits room controllers and energy-monitoring nodes that spend substantial time idle, while the 110 MHz Cortex-M33 core handles protocol overhead and local logic. CANbus, RS-485-oriented UART/USART, I2C, and SPI provide options for sensors and controllers, and TrustZone can separate trusted management functions from application code. Designers should plan debounce, bus termination, surge protection, and safe-state behavior around the MCU so a communication failure does not create an unsafe load or control output.
Önerilen
Compact Consumer and Wearable Electronics
The STM32L552CCT6 supports compact consumer and wearable products where processing capability, security, and board area must coexist. The 48-LQFP 7 x 7 mm package preserves routing flexibility compared with larger lead-count packages, while the 110 MHz Cortex-M33 core handles user-interface logic, sensor fusion, and accessory protocols. The FPU supports common audio, gesture, or motion-processing workloads, and TrustZone protects credentials and firmware components. Power-budget validation should separate active processing, radio transmission, display refresh, and peripheral leakage. The final enclosure, antenna, charging path, and thermal environment must be evaluated together to avoid choosing MCU efficiency that the complete product cannot deliver.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: STM32L552CCT6 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Ana Farklılayıcılar
- Newer 32-bit security architecture (karşılaştırma:STM32F091CCT6J)
- Higher processing capability in the STM32L5 low-power family (karşılaştırma:STM32L4R5ZIT6)
- Hardware-assisted isolation and floating-point acceleration (karşılaştırma:STM32F091CCT6J)
Tasarım Notları
Use the STM32L552xx power-supply and SMPS configuration diagrams as the basis for decoupling and rail planning. Place every required input and output capacitor at the pins specified by the manufacturer, with a short return path to the appropriate ground plane. Confirm the exact device supply range and regulator topology before PCB release. If the design uses battery power, calculate average current from MCU active and low-power states, radio duty cycle, sensor loads, and regulator efficiency rather than relying only on the maximum CPU frequency.
Design around the 48-LQFP 7 x 7 mm footprint using the manufacturer land pattern, solder-mask, paste, and courtyard drawings. Keep SWD programming access available, route sensitive clock and communication signals away from switching nodes, and provide test points for supply, reset, and key communication interfaces. The device has many multiplexed peripheral functions, so assign pins from the exact package pin table and verify alternate-function conflicts in the device configuration before routing.
Do not treat an STM32L5-family device as interchangeable with an STM32F0 or STM32L4 solely because the package has 48 leads. Firmware startup, vector-table placement, clock configuration, TrustZone partitioning, peripheral instances, interrupt mappings, and low-power behavior can differ substantially. For a replacement, compare the exact orderable MPN, pin names, electrical limits, memory map, peripheral matrix, boot behavior, and development-tool support. Migrate the application and hardware in a controlled prototype rather than assuming binary or register compatibility.
Separate sensitive analog or sensor paths from digital and power-return currents, especially when the MCU drives wireless, motor, or display circuitry. Use continuous ground-plane return paths and place bulk and high-frequency bypass capacitors at their associated supply pins. For CANbus, UART, USB, and other external interfaces, follow the device-specific transceiver layout and isolation strategy. Review rise time, ringing, and ground-current coupling during oscilloscope measurements because apparently correct communication can still fail under simultaneous switching loads.
Uyumluluk Bilgisi
The exact STM32L552CCT6 compliance declarations and automotive qualification status require confirmation from the manufacturer product documentation or declaration records.