STMicroelectronics

STM32L552CCT6 - 110MHz Cortex-M33 MCU, 256KB Flash | STMicroelectronics

Référence : STM32L552CCT6 ✓ Actif
48-LQFP, 7 x 7 mm Package 110 MHz Speed 256 KB Memory
MOQ : 1 |

STM32L552CCT6 Présentation

STMicroelectronics STM32L552CCT6 is an ultra-low-power 32-bit Arm Cortex-M33 microcontroller with TrustZone, an FPU, 110 MHz maximum operating frequency, and 256 KB of flash memory in a 48-LQFP 7 x 7 mm package. The STM32L5 family combines 165 DMIPS-class processing performance with power-management capabilities including an SMPS and security-focused Arm TrustZone isolation. It is designed for compact embedded systems that require strong low-power performance, connected peripherals, and hardware-assisted security without the footprint of a higher-density microcontroller.

An ultra-low-power microcontroller is an embedded processing device designed to minimize energy use during active operation, sleep, and standby states. Within the broader semiconductor hierarchy, this product is a 32-bit microcontroller based on the Arm Cortex-M33 RISC core, part of the STM32L5 series, and intended for industrial, IoT, consumer, medical, and connected-product applications. Its combination of real-time control, serial connectivity, DMA, cryptographic trust, and energy-saving operating modes makes it suitable for systems that must remain responsive while consuming little power between events.

Key features include an Arm Cortex-M33 core operating up to 110 MHz, an FPU for efficient single-precision arithmetic, Arm TrustZone support, 256 KB of flash memory, and a family-level SRAM capacity of up to 256 KB. Peripheral connectivity includes CANbus, I2C, IrDA, LINbus, MMC/SD, QSPI, SAI, SPI, UART/USART, and USB. Brown-out detection and reset, DMA, and PWM capabilities support connected sensor, control, communications, and data-transfer designs.

The Cortex-M33 architecture provides a 32-bit instruction set, exception model, and secure execution environment while retaining the deterministic behavior expected from an embedded MCU. TrustZone separates secure and non-secure software, while the FPU accelerates floating-point workloads without relying on a separate math accelerator. The STM32L5 family supports up to 165 DMIPS, and its SMPS architecture helps optimize power-delivery requirements in low-energy designs. Exact device-level current, voltage, and temperature limits should be selected from the manufacturer electrical-characteristics tables.

Typical applications include battery-powered IoT sensors, industrial condition-monitoring nodes, secure wireless-device controllers, low-power data loggers, building automation endpoints, and compact consumer accessories. Interfaces such as SPI, I2C, UART/USART, CANbus, SAI, and USB allow the MCU to connect sensors, displays, transceivers, storage devices, and human-interface subsystems. Low-power operation is particularly valuable where the product must wake periodically, collect data, transmit results, and return to sleep.

Design the PCB around the 48-LQFP footprint, power architecture, decoupling strategy, and exposed debug/programming interface before committing the layout. Confirm the exact pin assignment, supply voltage, clock configuration, low-power current, and temperature grade in the STM32L552xx datasheet. When firmware depends on TrustZone partitioning or the SMPS configuration, validate the boot flow, peripheral ownership, and power-sequencing behavior on the final hardware.

This page combines the official STM32L552xx family specifications, exact STM32L552CCT6 package and memory details, sourcing guidance, and verified drop-in alternatives to support MCU selection, PCB planning, firmware bring-up, and second-source evaluation.

Alternatives de remplacement direct pour STM32L552CCT6 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Aucune alternative de remplacement direct disponible pour ce produit.

Demander des alternatives

STM32L552CCT6 Valeurs maximales et caractéristiques électriques

Product Type Ultra-low-power 32-bit microcontroller
Core Processor Arm Cortex-M33
Core Architecture 32-bit RISC
Maximum CPU Frequency 110 MHz
Flash Memory 256 KB
Family Maximum SRAM 256 KB
Family Processing Performance 165 DMIPS
Floating-Point Unit Present
Security Arm TrustZone
Power Architecture SMPS
Boîtier 48-LQFP, 7 x 7 mm
Type de montage Surface mount
Connectivity CANbus, I2C, IrDA, LINbus, MMC/SD, QSPI, SAI, SPI, UART/USART, USB
Core Count 1
Program Memory Type Flash
Brown-Out Detection and Reset Supported
DMA Supported
PWM Supported

Guide de configuration des broches du STM32L552CCT6 48-lqfp, 7 x 7 mm

Configuration des broches du STM32L552CCT6 (boîtier 48-lqfp, 7 x 7 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier 48-lqfp, 7 x 7 mm pour le STM32L552CCT6

Aucune donnée de brochage détaillée disponible pour STM32L552CCT6.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

STM32L552CCT6 convient pour 6 applications: Battery-Powered IoT Sensor Nodes, Industrial Condition Monitoring, Secure Connected Device Controller, Low-Power Data Loggers, Building Automation Endpoints, Compact Consumer and Wearable Electronics.

🧩

Battery-Powered IoT Sensor Nodes

The STM32L552CCT6 fits battery-powered IoT sensor nodes that periodically wake, acquire measurements, process them locally, and transmit results. Its 110 MHz Arm Cortex-M33 core provides useful control performance while the STM32L5 family's ultra-low-power focus supports energy-conscious designs. The 256 KB of flash accommodates firmware, protocol stacks, and configuration data, while I2C and SPI connect common sensors and radio modules. UART/USART or USB can support recovery and wired commissioning. Battery-life calculations should use the exact device low-power currents, regulator efficiency, radio duty cycle, and sensor load from the final system design.

🏭

Industrial Condition Monitoring

The STM32L552CCT6 is suitable for industrial condition-monitoring equipment that combines motor, vibration, temperature, or acoustic sensing with local edge processing. Its Cortex-M33 core supports responsive filtering and event handling at up to 110 MHz, and the FPU assists with floating-point signal calculations. RS-485-capable UART/USART links, CANbus, SPI, and I2C support sensors and plant networks, while DMA reduces interrupt overhead during continuous transfers. Brown-out detection and reset improve recovery from unstable industrial supplies. Production qualification should include the exact temperature grade, isolation architecture, grounding, and EMC requirements.

🔒

Secure Connected Device Controller

The STM32L552CCT6 fits secure connected-device controllers that must isolate firmware, authenticate peripherals, and manage low-power communications. Arm TrustZone provides a hardware-assisted boundary between secure and non-secure software, while the 110 MHz Cortex-M33 core supports protocol processing and real-time control. Its 256 KB of flash provides room for secure boot code, application firmware, and communication stacks. USB, QSPI, SPI, and UART/USART support external storage, radios, and service interfaces. Security claims should be validated through the complete firmware architecture, key-management plan, debug-lock configuration, and TrustZone partitioning rather than by the MCU model name alone.

📟

Low-Power Data Loggers

The STM32L552CCT6 can act as the central controller in a low-power environmental or fleet data logger. Its 256 KB of flash supports firmware and local buffering, and the STM32L5 low-power architecture is well suited to designs that spend most of their time in a reduced-power state. I2C handles environmental sensors, SPI supports higher-bandwidth storage or radio devices, and UART/USART provides a simple configuration channel. The FPU assists with calibration and filtering. Storage endurance, timestamp accuracy, write wear leveling, and battery capacity must be evaluated together because frequent logging can dominate the energy budget even when the MCU itself is efficient.

🏠

Building Automation Endpoints

The STM32L552CCT6 is appropriate for compact building-automation endpoints that coordinate environmental sensors, lighting controls, and wired communications. Its low-power design focus benefits room controllers and energy-monitoring nodes that spend substantial time idle, while the 110 MHz Cortex-M33 core handles protocol overhead and local logic. CANbus, RS-485-oriented UART/USART, I2C, and SPI provide options for sensors and controllers, and TrustZone can separate trusted management functions from application code. Designers should plan debounce, bus termination, surge protection, and safe-state behavior around the MCU so a communication failure does not create an unsafe load or control output.

📱

Compact Consumer and Wearable Electronics

The STM32L552CCT6 supports compact consumer and wearable products where processing capability, security, and board area must coexist. The 48-LQFP 7 x 7 mm package preserves routing flexibility compared with larger lead-count packages, while the 110 MHz Cortex-M33 core handles user-interface logic, sensor fusion, and accessory protocols. The FPU supports common audio, gesture, or motion-processing workloads, and TrustZone protects credentials and firmware components. Power-budget validation should separate active processing, radio transmission, display refresh, and peripheral leakage. The final enclosure, antenna, charging path, and thermal environment must be evaluated together to avoid choosing MCU efficiency that the complete product cannot deliver.

What are the key specifications of STM32L552CCT6 that engineers should know?
The STM32L552CCT6 combines a 110 MHz Arm Cortex-M33 core, 256 KB of flash memory, an FPU, Arm TrustZone security, and an SMPS in a 48-LQFP 7 x 7 mm package. According to the STMicroelectronics STM32L552xx datasheet, the STM32L5 family reaches up to 165 DMIPS and supports CANbus, USB, SPI, I2C, UART/USART, SAI, QSPI, DMA, and PWM. These features make it appropriate for low-power connected products, industrial controls, secure embedded systems, and battery-operated IoT equipment.
What is the operating frequency of STM32L552CCT6?
The STM32L552CCT6 operates at up to 110 MHz with an Arm Cortex-M33 32-bit RISC core. The manufacturer describes the STM32L5 family as delivering up to 165 DMIPS, combining that processing capability with low-power operating modes. The 110 MHz maximum frequency makes the device suitable for responsive control loops, connected sensor nodes, and communication gateways, while the Cortex-M33 exception model supports deterministic interrupt-driven firmware.
How much flash and SRAM does STM32L552CCT6 have?
The STM32L552CCT6 has 256 KB of flash memory, and the STM32L552xx family supports up to 256 KB of SRAM. The manufacturer product listing identifies the exact device as a 256K x 8 flash MCU. Because the family maximum and the exact device value may differ across orderable variants, use the STM32L552xx memory-map and device-description tables when allocating buffers, updating firmware, or checking SRAM capacity for the specific part.
Which peripherals are available on STM32L552CCT6?
The STM32L552CCT6 supports CANbus, I2C, IrDA, LINbus, MMC/SD, QSPI, SAI, SPI, UART/USART, and USB connectivity, along with DMA and PWM. According to the STM32L552xx datasheet, these interfaces support sensor hubs, industrial communication, audio, external storage, and low-power serial links. Brown-out detection and reset improve safe startup behavior, while DMA reduces processor involvement during data transfers.
Where can I download the STM32L552CCT6 datasheet PDF?
The official STM32L552CCT6 datasheet PDF is available from STMicroelectronics at https://www.st.com/resource/en/datasheet/stm32l552cc.pdf. It covers the STM32L552xx family and is the primary reference for pin assignments, electrical characteristics, memory mapping, clock architecture, low-power behavior, and peripheral operation. Use the manufacturer product page at https://www.st.com/en/microcontrollers-microprocessors/stm32l552cc.html for family-level product information and supporting documentation.
Where can I find the STM32L552CCT6 pinout?
The STM32L552CCT6 pinout is found in the pin-description and package drawings in the official STM32L552xx datasheet. The exact device uses a 48-LQFP 7 x 7 mm package, so its 48 physical lead positions must be assigned according to that package and the selected device variant. Assign PCB tracks and test points directly from the manufacturer pin table rather than relying on generic STM32L552 diagrams, because peripheral multiplexing and alternate-function details depend on the exact pin.
Is STM32L552CCT6 suitable for battery-powered IoT devices?
Yes, the STM32L552CCT6 is suitable for battery-powered IoT devices because it belongs to STMicroelectronics' ultra-low-power STM32L5 family and combines multiple sleep-oriented operating features with a 110 MHz Arm Cortex-M33 core. It can use SPI, I2C, UART/USART, CANbus, or wireless-controller links for sensing and communications. Final battery-life estimates require the selected regulator, radio, sensor duty cycle, and the exact low-power current figures from the STM32L552xx datasheet.
STM32L552CCT6 vs STM32F091CCT6J - which MCU is better for a low-power design?
The STM32L552CCT6 is generally the stronger choice for an ultra-low-power design because it uses the newer 110 MHz Arm Cortex-M33 core, includes TrustZone and an FPU, and belongs to STMicroelectronics' STM32L5 ultra-low-power family. The STM32F091CCT6J is an STM32F0-series Cortex-M0+ device. They share a 48-LQFP family of options, but the two are not automatically interchangeable at the firmware, peripheral, clock, security, and pin-function levels.
STM32L552CCT6 vs STM32L4R5ZIT6 - which one fits an existing 48-LQFP design?
The STM32L552CCT6 uses a 48-LQFP package, while the STM32L4R5ZIT6 is identified in the comparison listing as a different package. Consequently, the STM32L552CCT6 is the relevant option for a board designed around a 48-LQFP footprint, but it should not replace an STM32L4R5ZIT6 without verifying the package, pin function, voltage, clock, peripheral, and firmware changes. The STM32L552CCT6 adds the Arm Cortex-M33, TrustZone, FPU, and a 110 MHz maximum operating frequency.
When should I choose STM32L552CCT6 over a lower-power STM32 microcontroller?
Choose the STM32L552CCT6 when a design needs more than basic control and can benefit from a 110 MHz Arm Cortex-M33 core, 256 KB of flash, TrustZone isolation, an FPU, and broad serial connectivity. Its 48-LQFP package supports compact industrial, IoT, and consumer boards without requiring the largest MCU packages. Select a simpler STM32 device instead when maximum processing throughput, hardware isolation, or the STM32L5 peripheral mix is unnecessary and board-area reduction is the overriding priority.
Is STM32L552CCT6 suitable for industrial control and condition monitoring?
Yes, the STM32L552CCT6 fits industrial condition-monitoring and compact control systems that need low-power operation alongside substantial peripheral connectivity. The MCU provides 256 KB of flash, a 110 MHz Cortex-M33 core, CANbus, RS-485-oriented UART/USART capability, SPI, I2C, QSPI, DMA, PWM, and brown-out protection. For production equipment, verify the exact temperature grade, electrical limits, isolation requirements, and functional-safety obligations before releasing the design.
What can replace STM32L552CCT6?
A genuine drop-in replacement for the STM32L552CCT6 must match its 48-LQFP footprint, pin functions, supply requirements, memory configuration, peripheral assignments, and firmware expectations. The available cross-reference results do not establish another manufacturer as a fully pin- and software-compatible source for this exact device. Closest STM32 family options can differ in temperature suffix, flash density, clock tree, peripherals, and startup behavior, so treat them as redesign candidates rather than unqualified replacements.
What is the best STMicroelectronics equivalent for STM32L552CCT6?
The closest STMicroelectronics alternatives are other orderable STM32L552-family configurations, but a valid drop-in must retain the 48-LQFP footprint and compatible pinout while remaining within the required memory, clock, peripheral, and temperature limits. No alternate manufacturer part is established as a drop-in equivalent by the available cross-reference information. When ordering an alternate STMicroelectronics variant, compare the exact pin table, electrical characteristics, Arm Cortex-M33 feature set, TrustZone configuration, and peripheral matrix before treating it as interchangeable.
Where can I buy STM32L552CCT6 online?
Use the Request a Quote form on this page to request STM32L552CCT6 availability, current commercial terms, and lot-related supply information. STMicroelectronics lists the device as active, and authorized-channel records list the exact 48-LQFP part with 256 KB of flash. The request should specify the required quantity, tray packaging, target shipment date, and any date-code or traceability requirements so the current supply position can be reviewed.
What is the price and lead time for STM32L552CCT6?
Submit the Request a Quote form on this page for the current price, stock position, minimum order quantity, and lead time for STM32L552CCT6. Supply conditions can change by quantity, package configuration, and manufacturing lot, so a historical listing figure is not an actionable quotation. Include the required tray quantity, delivery location, target date, and inspection or traceability requirements in the request for an accurate response.

Données de référence d'ingénierie pour STM32L552CCT6 — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the STM32L552CCT6 when a compact 48-LQFP design requires the STM32L5 family's low-power characteristics together with a 110 MHz Arm Cortex-M33 core, 256 KB of flash, TrustZone, an FPU, and extensive serial connectivity. It is a strong fit for secure IoT devices, industrial monitoring, connected controllers, and low-power data loggers. Consider an STM32F091CCT6J only when its Cortex-M0+ performance and feature set are sufficient and the legacy architecture is strategically preferable. Consider an STM32L4R5ZIT6 only after accounting for its different package, pin assignment, peripheral set, and firmware requirements. No cross-manufacturer part is established as a genuine drop-in replacement, so any second-source decision should include a detailed electrical, pin-function, peripheral, toolchain, and firmware-compatibility review rather than a package-only comparison.

Principaux différenciateurs

  • Newer 32-bit security architecture (vs STM32F091CCT6J)
  • Higher processing capability in the STM32L5 low-power family (vs STM32L4R5ZIT6)
  • Hardware-assisted isolation and floating-point acceleration (vs STM32F091CCT6J)

Notes de conception

Use the STM32L552xx power-supply and SMPS configuration diagrams as the basis for decoupling and rail planning. Place every required input and output capacitor at the pins specified by the manufacturer, with a short return path to the appropriate ground plane. Confirm the exact device supply range and regulator topology before PCB release. If the design uses battery power, calculate average current from MCU active and low-power states, radio duty cycle, sensor loads, and regulator efficiency rather than relying only on the maximum CPU frequency.

Design around the 48-LQFP 7 x 7 mm footprint using the manufacturer land pattern, solder-mask, paste, and courtyard drawings. Keep SWD programming access available, route sensitive clock and communication signals away from switching nodes, and provide test points for supply, reset, and key communication interfaces. The device has many multiplexed peripheral functions, so assign pins from the exact package pin table and verify alternate-function conflicts in the device configuration before routing.

Do not treat an STM32L5-family device as interchangeable with an STM32F0 or STM32L4 solely because the package has 48 leads. Firmware startup, vector-table placement, clock configuration, TrustZone partitioning, peripheral instances, interrupt mappings, and low-power behavior can differ substantially. For a replacement, compare the exact orderable MPN, pin names, electrical limits, memory map, peripheral matrix, boot behavior, and development-tool support. Migrate the application and hardware in a controlled prototype rather than assuming binary or register compatibility.

Separate sensitive analog or sensor paths from digital and power-return currents, especially when the MCU drives wireless, motor, or display circuitry. Use continuous ground-plane return paths and place bulk and high-frequency bypass capacitors at their associated supply pins. For CANbus, UART, USB, and other external interfaces, follow the device-specific transceiver layout and isolation strategy. Review rise time, ringing, and ground-current coupling during oscilloscope measurements because apparently correct communication can still fail under simultaneous switching loads.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The exact STM32L552CCT6 compliance declarations and automotive qualification status require confirmation from the manufacturer product documentation or declaration records.

Données vérifiées le : 2026-11-15 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

STM32L552CCT6 datasheet STM32L552CCT6 datasheet pdf STM32L552CCT6 pinout STM32L552CCT6 48-LQFP footprint STM32L552CCT6 specifications STM32L552CCT6 TrustZone FPU STM32L552CCT6 drop-in replacement STM32L552CCT6 equivalent STM32L552CCT6 vs STM32F091CCT6J STM32L552CCT6 vs STM32L4R5ZIT6 STM32L552CCT6 application circuit STM32L552CCT6 price STM32L552CCT6 stock STMicroelectronics STM32L552CCT6

Composants & termes associés

STMicroelectronics STM32L552CCT6 STM32L552xx STM32L5 Arm Cortex-M33 Arm TrustZone FPU SMPS ultra-low-power microcontroller 32-bit RISC core embedded microcontroller semiconductor 48-LQFP LQFP package family surface-mount package 256 KB flash memory 110 MHz CPU 165 DMIPS CANbus UART/USART SPI I2C USB QSPI DMA PWM industrial condition monitoring battery-powered IoT building automation security partitioning
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ