STMicroelectronics

STM8L101F3U6ATR - 16MHz 8KB Low-Power MCU | ST

MPN: STM8L101F3U6ATR ✓ Aktif
1.8 V / 2.5 V Vdss 0.3 µA Id 20-pin UFQFPN (3 x 3 mm) Package 16 MHz Speed 8 KB (8K x 8) Memory
MOQ: 1 |

STM8L101F3U6ATR Genel Bakış

STMicroelectronics STM8L101F3U6ATR is an ultra-low-power 8-bit microcontroller with a 16 MHz enhanced STM8 CPU core, up to 16 MIPS performance, and 8 KB of Flash memory in a 20-pin UFQFPN package measuring 3 x 3 mm. It combines a compact footprint with low-power operating modes for embedded systems that need efficient control, communication, and analog sensing.

An ultra-low-power microcontroller is an embedded semiconductor designed to execute control tasks while minimizing energy consumption during active operation and idle periods. The STM8L101 belongs to the STM8L EnergyLite family, which combines an 8-bit CISC core, Flash program memory, low-power modes, and integrated peripherals. In the system hierarchy, it is a microcontroller within the broader category of embedded processors and semiconductor devices.

The STM8L101F3U6ATR supports operation up to 16 MHz and includes multifunction timers, comparators, USART, SPI, and I2C connectivity. Its Flash memory provides 8 KB organized as 8K x 8, while the operating temperature range extends from -40 °C to +85 °C. The 20-pin UFQFPN package reduces PCB area compared with larger leaded or quad-flat packages, making the device suitable for compact control modules and sensor nodes.

The enhanced STM8 CPU core is intended for compact embedded workloads that benefit from fast execution without the complexity of a higher-bit-width processor. The device integrates multiple serial peripherals and comparators, reducing the need for external components in designs that require measurement, actuator control, or communication with sensors and peripherals. Its architecture also supports low-power operation, with Halt current specified at 0.3 µA.

Typical applications include low-power sensor nodes, industrial control modules, compact communication equipment, battery-powered instruments, and consumer devices. The I2C and SPI interfaces suit sensor and memory expansion, USART supports serial links, and the timers can handle periodic sensing, timing, or basic motor-control tasks. The 3 x 3 mm package is particularly useful where board space is restricted.

PCB design should preserve short, low-impedance connections for power, ground, clock, and communication signals. Place decoupling capacitors close to the supply pins, confirm exposed-pad grounding requirements against the manufacturer package drawing, and follow the recommended crystal and bypass-capacitor layout when using an external clock source.

This product page combines the manufacturer specifications with application guidance, package information, engineering design notes, and same-family drop-in alternatives. It is intended to help engineers evaluate the STM8L101F3U6ATR for low-power embedded designs without relying solely on a basic distributor specification table.

Drop-in alternatifler için STM8L101F3U6ATR — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller STM8L101F3U6ATR (aynı form faktörü ve ayağa oturma) — farklı olan Package, Mounting Type, CPU Architecture, Product Type, Program Memory Type.

STMicroelectronics
Package: 20-pin UFQFPN, 3 mm x 3 mm
Mounting Type: Surface mount
CPU Architecture: Enhanced STM8 8-bit core
İle Karşılaştır STM8L101F3U6ATR →
STMicroelectronics
Package: 20-pin UFQFPN
Mounting Type: Surface mount
Product Type: 8-bit access-line microcontroller
İle Karşılaştır STM8L101F3U6ATR →

STM8L151F2U6TR

✅ Yerleştirme
📦 UFQFPN-20 (3 x 3 mm)
Pin-to-pin STM8L151 family device with 2 KB less nominal Flash than the 8 KB STM8L101F3U6ATR and a broader peripheral set

📋 Katalogda Olmayan Referans Alternatifi

STM8L151F3U6ATR

✅ Yerleştirme
📦 UFQFPN-20 (3 x 3 mm)
Pin-to-pin STM8L151 family device with a broader peripheral set; core frequency remains up to 16 MHz

📋 Katalogda Olmayan Referans Alternatifi

STM8L152F2U6TR

✅ Yerleştirme
📦 UFQFPN-20 (3 x 3 mm)
Pin-to-pin STM8L152 family device with USB-capable family features and 2 KB less nominal Flash

📋 Katalogda Olmayan Referans Alternatifi

STM8L152F3U6ATR

✅ Yerleştirme
📦 UFQFPN-20 (3 x 3 mm)
Pin-to-pin STM8L152 family device with broader connectivity and peripheral features; core frequency remains up to 16 MHz

📋 Katalogda Olmayan Referans Alternatifi

STM8S103F3U6TR

✅ Yerleştirme
STMicroelectronics
📦 UFQFPN-20 (3 x 3 mm)
8-bit access-line microcontroller · 16 MHz · 8 KB · 8K x 8 bits · Integrated true data EEPROM · 10 bits · 3 timers · UART, SPI, and I2C

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

STM8L101F3U6ATR Maksimum Değerlendirmeler & Elektriksel Özellikler

Microcontroller Type 8-bit ultra-low-power microcontroller
CPU Architecture Enhanced STM8 8-bit CISC core
Maximum CPU Frequency 16 MHz
Maximum CPU Performance 16 MIPS
Flash Memory 8 KB (8K x 8)
Program Memory Type 8 KB Flash
Besleme Gerilimi 1.8 V / 2.5 V
Halt Mode Current 0.3 µA
İşletim Sıcaklığı Aralığı -40 °C to +85 °C
Paket 20-pin UFQFPN (3 x 3 mm)
Montaj Türü Tape-and-reel, surface mount
Serial Interface Count 3 interfaces
USART Interface 1 USART
SPI Interface 1 SPI
I2C Interface 1 I2C
Comparator Count 2 comparators
Multifunction Timer Support Yes

STM8L101F3U6ATR 20-pin ufqfpn (3 x 3 mm) Pin Yapısı Kılavuzu

STM8L101F3U6ATR (20-pin ufqfpn (3 x 3 mm) paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.

20-pin ufqfpn (3 x 3 mm) paket pin çizelgesi için STM8L101F3U6ATR

Ayrıntılı pin çıkış verisi mevcut değil: STM8L101F3U6ATR.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

STM8L101F3U6ATR için uygundur 6 uygulamas: Low-Power Sensor Node, Battery-Powered Instrument, Industrial Control Module, Serial Communication Equipment, LED Lighting Controller, Compact Consumer Device.

🧩

Low-Power Sensor Node

The STM8L101F3U6ATR fits a compact sensor node because it combines a 16 MHz enhanced 8-bit core with a specified Halt current of 0.3 µA. The MCU can sample a sensor through I2C or SPI, evaluate the reading locally, and enter a low-power state between measurements. Its 8 KB Flash supports a small embedded application without requiring an external memory device. The 20-pin UFQFPN body also reduces board area, although the exposed-pad and exposed-pad-related PCB requirements must be implemented according to the manufacturer land pattern. For battery-life estimation, include sensor current, regulator quiescent current, wake-up intervals, and radio activity rather than relying only on the 0.3 µA MCU Halt specification.

🔧

Battery-Powered Instrument

STM8L101F3U6ATR is appropriate for a battery-powered instrument that performs intermittent measurement and control functions. Its enhanced STM8 core can execute up to 16 MIPS at 16 MHz, allowing responsive signal conditioning and user-interface logic without moving those tasks to a higher-power processor. The integrated USART can support a host computer or configuration link, while comparators can provide simple threshold detection. Low-power system design should use the MCU's Halt mode between transactions and account for the energy required to wake the device and re-establish peripheral clocks. The 3 x 3 mm UFQFPN package is useful for handheld products where every millimeter of board area affects the enclosure, but sensitive analog measurements still require careful grounding and separate filtering.

🏭

Industrial Control Module

The STM8L101F3U6ATR can serve as the local controller in a compact industrial module because it combines USART, SPI, I2C, timers, and comparators in a single 20-pin device. The MCU can manage a sensor interface, periodic actuator updates, and a diagnostic link while operating across the specified -40 °C to +85 °C temperature range. Its 8 KB Flash is appropriate for focused control logic rather than a large user interface, and the enhanced 16 MHz core provides deterministic timing for common control tasks. For industrial deployment, validate the exact supply limits and I/O ratings in the manufacturer datasheet, isolate external field wiring from the logic ground where necessary, and use the timers for precise periodic tasks instead of relying on software delays.

🌐

Serial Communication Equipment

STM8L101F3U6ATR is suitable for compact serial communication equipment that needs protocol handling, local configuration, and low standby consumption. Its USART supports asynchronous serial communication, while SPI can connect to a radio, display controller, or external transceiver, and I2C supports configuration memories and sensors. The 16 MHz core is sufficient for many lightweight protocol stacks, and 8 KB Flash provides room for focused firmware. Designers should avoid treating the MCU's communication peripherals as complete physical-layer solutions: UART logic requires appropriate line drivers, and SPI or I2C signaling needs correctly terminated buses. The compact UFQFPN package reduces board area, but RF layouts, antenna keep-outs, and power-supply isolation remain separate PCB-design responsibilities.

💡

LED Lighting Controller

The STM8L101F3U6ATR can control compact LED lighting systems where a small footprint, deterministic timing, and low standby current are important. Its timers support periodic PWM-related functions, while comparators and serial interfaces can accept sensor inputs or lighting commands. The device can run at up to 16 MHz for responsive control and then use low-power states between user interactions or updates. The 20-pin 3 x 3 mm UFQFPN package leaves room for driver circuitry on a small PCB. LED current is not supplied by the microcontroller, so the design must use an appropriate external driver and keep switching-current paths separated from sensitive reference and measurement circuits. Firmware should include safe states for fault, timeout, and shutdown conditions to prevent unintended illumination.

📱

Compact Consumer Device

STM8L101F3U6ATR fits compact consumer devices that need an economical embedded controller without sacrificing serial connectivity or low-power behavior. The 8-bit core, 8 KB Flash, timers, comparators, USART, SPI, and I2C support control functions such as button handling, sensor polling, peripheral control, and simple configuration. Its 3 x 3 mm UFQFPN package enables placement close to the product's main connector and user interface. The MCU's low-power capability is particularly useful in intermittently operated products, although total energy consumption depends on external loads and the selected duty cycle. Before production, verify all package-specific soldering requirements, exposed-pad thermal behavior, and the relevant compliance declarations for the finished consumer product.

What is the operating voltage of STM8L101F3U6ATR?
The STM8L101F3U6ATR operates from a 1.8 V or 2.5 V supply, according to the manufacturer product listing. The device belongs to the STM8L101x3 low-power family, whose low operating voltage supports compact battery-powered and energy-conscious embedded products. Confirm the complete electrical limits and decoupling requirements in the STMicroelectronics manufacturer datasheet before finalizing the power architecture.
What are the key specifications of STM8L101F3U6ATR that engineers should know?
The STM8L101F3U6ATR combines a 16 MHz enhanced 8-bit STM8 core, up to 16 MIPS, 8 KB of Flash, and low-power operation in a 20-pin 3 x 3 mm UFQFPN package. Integrated resources include multifunction timers, comparators, USART, SPI, and I2C. According to the manufacturer product page, the STM8L101x1, STM8L101x2, and STM8L101x3 devices share the low-power family architecture.
Where can I download the STM8L101F3U6ATR datasheet PDF?
The official STM8L101F3U6ATR datasheet PDF is available through the STMicroelectronics technical-document link on this page. It covers the STM8L101F1, STM8L101F2, STM8L101F3, STM8L101G2, and STM8L101G3 variants, including electrical characteristics, package information, interfaces, timers, and low-power behavior. Use the manufacturer PDF for final pin assignments and design limits.
Where can I find the STM8L101F3U6ATR pinout?
The STM8L101F3U6ATR pinout is shown in the manufacturer datasheet under the UFQFPN package and pin-description sections. The device uses a 20-pin UFQFPN package with a 3 x 3 mm body. Use the package drawing and pin table together when assigning nets, because the exposed-pad connection and alternate-function assignments must be implemented exactly as specified.
Is STM8L101F3U6ATR suitable for low-power sensor nodes?
Yes, the STM8L101F3U6ATR is suitable for low-power sensor nodes because its enhanced STM8 core runs up to 16 MHz while offering a specified Halt current of 0.3 µA. Its I2C and SPI interfaces can connect common sensors, while the comparators support simple threshold measurements. Overall node consumption also depends on sensor current, duty cycle, and the selected operating mode.
STM8L101F3U6ATR vs STM8L151F2U6TR - which is better for a new design?
STM8L151F2U6TR is the stronger candidate when a new design can benefit from the expanded STM8L151 feature set, while STM8L101F3U6ATR remains appropriate for an established STM8L101 design requiring its known peripherals. The STM8L151 and STM8L152 families are stated to be pin-to-pin compatible with STM8L101 devices, but firmware, clock, peripheral, and memory differences still require verification before substitution.
What is the difference between STM8L101F3U6ATR and STM8S103F3U6TR?
STM8L101F3U6ATR is an ultra-low-power STM8L device, while STM8S103F3U6TR belongs to the STM8S performance-oriented 8-bit family. Both provide 8-bit embedded control, but their power-management priorities and peripheral implementations differ. A board-level replacement requires exact package, pin-function, clock, memory, and firmware validation; do not assume that equal Flash capacity guarantees drop-in compatibility.
When should I choose STM8L101F3U6ATR over STM8L151F3U6ATR?
Choose STM8L101F3U6ATR when the design is based on the STM8L101 feature set, has validated firmware for that device, and requires the established 8 KB Flash and integrated interface configuration. Choose STM8L151F3U6ATR for a new design that needs the broader STM8L151 peripheral set. The STM8L151 family is pin-to-pin compatible, but migration still requires software and electrical verification.
What can replace STM8L101F3U6ATR?
STM8L151F2U6TR, STM8L151F3U6ATR, STM8L152F2U6ATR, and STM8L152F3U6ATR are same-manufacturer alternatives from families documented as pin-to-pin compatible with STM8L101 devices. They are not identical functionally: Flash capacity, timers, communication peripherals, clock features, and low-power behavior may differ. Validate firmware, pin multiplexing, interrupt mapping, and supply conditions before replacement.
What is the best STMicroelectronics equivalent for STM8L101F3U6ATR?
STM8L151F2U6TR is a practical STMicroelectronics upgrade candidate when a 20-pin footprint and the broader STM8L151 peripheral set are acceptable. It preserves pin-to-pin compatibility with STM8L101 devices according to manufacturer family information, but it is not an identical substitute. A controlled schematic and firmware review is required before using it on a new board.
Where can I buy STM8L101F3U6ATR online?
Use the Request a Quote form on this page to request STM8L101F3U6ATR availability, lot conditions, and a current quotation. The part is an active STMicroelectronics ultra-low-power 8-bit MCU in a 20-pin UFQFPN package. Quote requests should state the required quantity, tape-and-reel packaging requirement, and any date requirements for the electronic components.
What is the price of STM8L101F3U6ATR?
The current commercial price for STM8L101F3U6ATR is obtained through the Request a Quote form on this page. The structured price panel reflects the latest qualifying commercial listing and can change with quantity, inventory, and market conditions. Request a written quotation for the exact order quantity and packaging configuration before placing a purchase order.
What is the lead time for STM8L101F3U6ATR?
The current lead time for STM8L101F3U6ATR should be requested through the Request a Quote form on this page. Include the required quantity, reel size, delivery destination, and production schedule. Stock and lead time can change by region and order quantity, so purchasing should rely on the supplier's written confirmation rather than a generic availability estimate.
Is STM8L101F3U6ATR in stock?
Current inventory for STM8L101F3U6ATR is shown through the Request a Quote workflow on this page. The manufacturer product page identifies the STM8L101x3 as part of the STM8L low-power family, while live stock varies by quantity and distribution channel. Submit the requested quantity and packaging details to obtain a firm availability response.
How much power does STM8L101F3U6ATR consume in low-power operation?
STM8L101F3U6ATR has a specified Halt-mode current of 0.3 µA, according to the manufacturer family information. Total system consumption can be higher in Run mode and depends on clock frequency, active peripherals, operating mode, and external circuitry. For battery-life calculations, measure the complete duty cycle and include regulator quiescent current rather than using the Halt figure alone.
Does STM8L101F3U6ATR support SPI, I2C, and USART?
Yes, STM8L101F3U6ATR includes USART, SPI, and I2C interfaces, along with multifunction timers and comparators. These resources support common embedded designs involving serial sensors, external memory, actuator control, and simple communications links. Pin assignment depends on the alternate-function configuration, so consult the manufacturer pin table before assigning external bus connections.
Is STM8L101F3U6ATR RoHS compliant and automotive qualified?
The STM8L101F3U6ATR is a general commercial-grade STM8L101 device, but its specific RoHS, REACH, and AEC-Q100 statuses must be confirmed from the current manufacturer product documentation before qualification. Do not infer automotive qualification from the industrial temperature range. Use the manufacturer compliance declarations and the ordered device suffix for formal sourcing decisions.

Mühendislik referans verileri: STM8L101F3U6ATR — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose STM8L101F3U6ATR when the design needs a compact 8-bit controller with 8 KB Flash, USART, SPI, I2C, timers, comparators, and a specified 0.3 µA Halt current. It is particularly suitable for battery-powered sensor nodes and small control modules where the 20-pin UFQFPN footprint and STM8L low-power behavior are priorities. Select STM8L151F3U6ATR when the broader STM8L151 peripheral set is useful but USB is unnecessary; the documented pin compatibility simplifies controlled family migration. Choose STM8L152F3U6ATR when the design benefits from USB in the same package family. STM8L151F2U6TR and STM8L152F2U6TR provide only 2 KB Flash, so they suit smaller applications. STM8S103F3U6TR is a broader STM8S-family option, but it should be selected only after checking its power-management behavior, peripheral differences, and firmware requirements. For every migration, verify the manufacturer pin table, electrical limits, memory layout, startup code, peripheral registers, and package land pattern.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün STM8L151F2U6TR STM8L151F3U6ATR STM8L152F2U6TR STM8L152F3U6ATR STM8S103F3U6TR
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 20-pin UFQFPN (3 x 3 mm) 20-pin UFQFPN (3 x 3 mm) 20-pin UFQFPN (3 x 3 mm) 20-pin UFQFPN (3 x 3 mm) 20-pin UFQFPN (3 x 3 mm) 20-pin UFQFPN (3 x 3 mm)
CPU Architecture 8-bit enhanced STM8 CISC core 8-bit enhanced STM8 core 8-bit enhanced STM8 core 8-bit enhanced STM8 core 8-bit enhanced STM8 core 8-bit STM8 core
Flash Memory 8 KB 2 KB 8 KB 2 KB 8 KB 8 KB
Low-Power Positioning STM8L ultra-low-power family; Halt current 0.3 µA STM8L ultra-low-power family STM8L ultra-low-power family STM8L ultra-low-power family STM8L ultra-low-power family STM8S general-purpose low-power family

Ana Farklılayıcılar

  • Combines a 16 MHz enhanced core with very low standby demand (karşılaştırma:STM8S103F3U6TR)
  • Maintains the same 20-pin UFQFPN format while adding a broader low-power peripheral set (karşılaştırma:STM8L151F2U6TR)
  • Provides 8 KB Flash for a larger embedded application than 2 KB variants (karşılaştırma:STM8L152F2U6TR)
  • Targets USB-capable STM8L152 designs without changing the package footprint (karşılaştırma:STM8L152F3U6ATR)

Tasarım Notları

Route the 1.8 V or 2.5 V supply and ground connections directly to the STM8L101F3U6ATR pins with short traces and minimal loop area. Place the required bypass capacitors at the package pins rather than at a distant power entry point. Confirm exposed-pad connectivity and thermal-pad geometry against the manufacturer UFQFPN land pattern because the package contains only 20 perimeter pins while also providing a central thermal connection.

Keep I2C and SPI routing away from switching supplies and noisy analog nodes. Use short traces for SPI clock and data, provide a continuous ground reference beneath the interface, and follow the device's alternate-function assignments from the manufacturer pin table. If an external crystal is used, keep the oscillator loop compact and isolate it from switching nodes; if an internal clock is used, verify startup behavior and peripheral timing after configuration.

Calculate average power from the actual operating duty cycle rather than the 0.3 µA Halt current alone. The MCU may consume substantially more current while executing code or operating its USART, SPI, I2C, timers, and comparators. Include regulator quiescent current and external load current in battery calculations, then verify each operating mode in hardware with the intended supply voltage and peripheral configuration.

Do not treat family-level pin compatibility as a guarantee that firmware transfers without modification. When moving among STM8L101, STM8L151, and STM8L152 devices, review memory size, startup files, peripheral registers, interrupt vectors, clock configuration, alternate-function mapping, and USB support. Preserve a device-specific hardware abstraction layer so peripheral and pin assignments can be adjusted without redesigning the application.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The order-specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations should be confirmed from current STMicroelectronics product documentation.

Veri doğrulanma tarihi: 2026-11-20 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

STM8L101F3U6ATR datasheet STM8L101F3U6ATR pinout STM8L101F3U6ATR datasheet pdf STM8L101F3U6ATR equivalent STM8L101F3U6ATR replacement STM8L101F3U6ATR price STM8L101F3U6ATR stock STMicroelectronics STM8L101F3U6ATR STM8L101F3 16MHz 8KB MCU STM8L101F3 UFQFPN-20 pinout STM8L101F3 low power sensor node STM8L101F3 vs STM8L151F3 STM8L101F3 application circuit

İlgili Bileşenler ve Terimler

STMicroelectronics STM8L101F3U6ATR STM8L101F3 STM8L101 STM8L EnergyLite STM8L151F2U6TR STM8L151F3U6ATR STM8L152F2U6TR STM8L152F3U6ATR STM8S103F3U6TR STM8 CPU core 8-bit microcontroller ultra-low-power microcontroller embedded microcontroller CISC architecture Flash memory UFQFPN-20 QFN package family surface-mount package USART SPI I2C Halt mode low-power sensor node
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle