STM8L101F3U6ATR - 16MHz 8KB Low-Power MCU | ST
MPN: STM8L101F3U6ATR ✓ AktifSTM8L101F3U6ATR Ringkasan
An ultra-low-power microcontroller is an embedded semiconductor designed to execute control tasks while minimizing energy consumption during active operation and idle periods. The STM8L101 belongs to the STM8L EnergyLite family, which combines an 8-bit CISC core, Flash program memory, low-power modes, and integrated peripherals. In the system hierarchy, it is a microcontroller within the broader category of embedded processors and semiconductor devices.
The STM8L101F3U6ATR supports operation up to 16 MHz and includes multifunction timers, comparators, USART, SPI, and I2C connectivity. Its Flash memory provides 8 KB organized as 8K x 8, while the operating temperature range extends from -40 °C to +85 °C. The 20-pin UFQFPN package reduces PCB area compared with larger leaded or quad-flat packages, making the device suitable for compact control modules and sensor nodes.
The enhanced STM8 CPU core is intended for compact embedded workloads that benefit from fast execution without the complexity of a higher-bit-width processor. The device integrates multiple serial peripherals and comparators, reducing the need for external components in designs that require measurement, actuator control, or communication with sensors and peripherals. Its architecture also supports low-power operation, with Halt current specified at 0.3 µA.
Typical applications include low-power sensor nodes, industrial control modules, compact communication equipment, battery-powered instruments, and consumer devices. The I2C and SPI interfaces suit sensor and memory expansion, USART supports serial links, and the timers can handle periodic sensing, timing, or basic motor-control tasks. The 3 x 3 mm package is particularly useful where board space is restricted.
PCB design should preserve short, low-impedance connections for power, ground, clock, and communication signals. Place decoupling capacitors close to the supply pins, confirm exposed-pad grounding requirements against the manufacturer package drawing, and follow the recommended crystal and bypass-capacitor layout when using an external clock source.
This product page combines the manufacturer specifications with application guidance, package information, engineering design notes, and same-family drop-in alternatives. It is intended to help engineers evaluate the STM8L101F3U6ATR for low-power embedded designs without relying solely on a basic distributor specification table.
Alternatif penggantian untuk STM8L101F3U6ATR — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian STM8L101F3U6ATR (sama faktor bentuk dan footprint) — berbeda di dalam Package, Mounting Type, CPU Architecture, Product Type, Program Memory Type.
STM8L151F2U6TR
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
STM8L151F3U6ATR
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
STM8L152F2U6TR
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
STM8L152F3U6ATR
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
STM8S103F3U6TR
✅ Drop-InKontak untuk harga
Lihat Datasheet →STM8L101F3U6ATR Rating Maksimal & Karakteristik Listrik
| Microcontroller Type | 8-bit ultra-low-power microcontroller |
| CPU Architecture | Enhanced STM8 8-bit CISC core |
| Maximum CPU Frequency | 16 MHz |
| Maximum CPU Performance | 16 MIPS |
| Flash Memory | 8 KB (8K x 8) |
| Program Memory Type | 8 KB Flash |
| Tegangan Pemuat | 1.8 V / 2.5 V |
| Halt Mode Current | 0.3 µA |
| Rentang Suhu Kerja | -40 °C to +85 °C |
| Paket | 20-pin UFQFPN (3 x 3 mm) |
| Tipe Mounting | Tape-and-reel, surface mount |
| Serial Interface Count | 3 interfaces |
| USART Interface | 1 USART |
| SPI Interface | 1 SPI |
| I2C Interface | 1 I2C |
| Comparator Count | 2 comparators |
| Multifunction Timer Support | Yes |
STM8L101F3U6ATR 20-pin ufqfpn (3 x 3 mm) Diamant Konfigurasi Panduan
Konfigurasi pin untuk STM8L101F3U6ATR (20-pin ufqfpn (3 x 3 mm) pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk STM8L101F3U6ATR.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
STM8L101F3U6ATR cocok untuk 6 aplikasis: Low-Power Sensor Node, Battery-Powered Instrument, Industrial Control Module, Serial Communication Equipment, LED Lighting Controller, Compact Consumer Device.
Low-Power Sensor Node
The STM8L101F3U6ATR fits a compact sensor node because it combines a 16 MHz enhanced 8-bit core with a specified Halt current of 0.3 µA. The MCU can sample a sensor through I2C or SPI, evaluate the reading locally, and enter a low-power state between measurements. Its 8 KB Flash supports a small embedded application without requiring an external memory device. The 20-pin UFQFPN body also reduces board area, although the exposed-pad and exposed-pad-related PCB requirements must be implemented according to the manufacturer land pattern. For battery-life estimation, include sensor current, regulator quiescent current, wake-up intervals, and radio activity rather than relying only on the 0.3 µA MCU Halt specification.
Direkomendasikan
Battery-Powered Instrument
STM8L101F3U6ATR is appropriate for a battery-powered instrument that performs intermittent measurement and control functions. Its enhanced STM8 core can execute up to 16 MIPS at 16 MHz, allowing responsive signal conditioning and user-interface logic without moving those tasks to a higher-power processor. The integrated USART can support a host computer or configuration link, while comparators can provide simple threshold detection. Low-power system design should use the MCU's Halt mode between transactions and account for the energy required to wake the device and re-establish peripheral clocks. The 3 x 3 mm UFQFPN package is useful for handheld products where every millimeter of board area affects the enclosure, but sensitive analog measurements still require careful grounding and separate filtering.
Direkomendasikan
Industrial Control Module
The STM8L101F3U6ATR can serve as the local controller in a compact industrial module because it combines USART, SPI, I2C, timers, and comparators in a single 20-pin device. The MCU can manage a sensor interface, periodic actuator updates, and a diagnostic link while operating across the specified -40 °C to +85 °C temperature range. Its 8 KB Flash is appropriate for focused control logic rather than a large user interface, and the enhanced 16 MHz core provides deterministic timing for common control tasks. For industrial deployment, validate the exact supply limits and I/O ratings in the manufacturer datasheet, isolate external field wiring from the logic ground where necessary, and use the timers for precise periodic tasks instead of relying on software delays.
Direkomendasikan
Serial Communication Equipment
STM8L101F3U6ATR is suitable for compact serial communication equipment that needs protocol handling, local configuration, and low standby consumption. Its USART supports asynchronous serial communication, while SPI can connect to a radio, display controller, or external transceiver, and I2C supports configuration memories and sensors. The 16 MHz core is sufficient for many lightweight protocol stacks, and 8 KB Flash provides room for focused firmware. Designers should avoid treating the MCU's communication peripherals as complete physical-layer solutions: UART logic requires appropriate line drivers, and SPI or I2C signaling needs correctly terminated buses. The compact UFQFPN package reduces board area, but RF layouts, antenna keep-outs, and power-supply isolation remain separate PCB-design responsibilities.
Direkomendasikan
LED Lighting Controller
The STM8L101F3U6ATR can control compact LED lighting systems where a small footprint, deterministic timing, and low standby current are important. Its timers support periodic PWM-related functions, while comparators and serial interfaces can accept sensor inputs or lighting commands. The device can run at up to 16 MHz for responsive control and then use low-power states between user interactions or updates. The 20-pin 3 x 3 mm UFQFPN package leaves room for driver circuitry on a small PCB. LED current is not supplied by the microcontroller, so the design must use an appropriate external driver and keep switching-current paths separated from sensitive reference and measurement circuits. Firmware should include safe states for fault, timeout, and shutdown conditions to prevent unintended illumination.
Direkomendasikan
Compact Consumer Device
STM8L101F3U6ATR fits compact consumer devices that need an economical embedded controller without sacrificing serial connectivity or low-power behavior. The 8-bit core, 8 KB Flash, timers, comparators, USART, SPI, and I2C support control functions such as button handling, sensor polling, peripheral control, and simple configuration. Its 3 x 3 mm UFQFPN package enables placement close to the product's main connector and user interface. The MCU's low-power capability is particularly useful in intermittently operated products, although total energy consumption depends on external loads and the selected duty cycle. Before production, verify all package-specific soldering requirements, exposed-pad thermal behavior, and the relevant compliance declarations for the finished consumer product.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk STM8L101F3U6ATR — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | STM8L151F2U6TR | STM8L151F3U6ATR | STM8L152F2U6TR | STM8L152F3U6ATR | STM8S103F3U6TR |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 20-pin UFQFPN (3 x 3 mm) | 20-pin UFQFPN (3 x 3 mm) | 20-pin UFQFPN (3 x 3 mm) | 20-pin UFQFPN (3 x 3 mm) | 20-pin UFQFPN (3 x 3 mm) | 20-pin UFQFPN (3 x 3 mm) |
| CPU Architecture | 8-bit enhanced STM8 CISC core | 8-bit enhanced STM8 core | 8-bit enhanced STM8 core | 8-bit enhanced STM8 core | 8-bit enhanced STM8 core | 8-bit STM8 core |
| Flash Memory | 8 KB | 2 KB | 8 KB | 2 KB | 8 KB | 8 KB |
| Low-Power Positioning | STM8L ultra-low-power family; Halt current 0.3 µA | STM8L ultra-low-power family | STM8L ultra-low-power family | STM8L ultra-low-power family | STM8L ultra-low-power family | STM8S general-purpose low-power family |
Diferensiator Kunci
- Combines a 16 MHz enhanced core with very low standby demand (vsSTM8S103F3U6TR)
- Maintains the same 20-pin UFQFPN format while adding a broader low-power peripheral set (vsSTM8L151F2U6TR)
- Provides 8 KB Flash for a larger embedded application than 2 KB variants (vsSTM8L152F2U6TR)
- Targets USB-capable STM8L152 designs without changing the package footprint (vsSTM8L152F3U6ATR)
Catatan Desain
Route the 1.8 V or 2.5 V supply and ground connections directly to the STM8L101F3U6ATR pins with short traces and minimal loop area. Place the required bypass capacitors at the package pins rather than at a distant power entry point. Confirm exposed-pad connectivity and thermal-pad geometry against the manufacturer UFQFPN land pattern because the package contains only 20 perimeter pins while also providing a central thermal connection.
Keep I2C and SPI routing away from switching supplies and noisy analog nodes. Use short traces for SPI clock and data, provide a continuous ground reference beneath the interface, and follow the device's alternate-function assignments from the manufacturer pin table. If an external crystal is used, keep the oscillator loop compact and isolate it from switching nodes; if an internal clock is used, verify startup behavior and peripheral timing after configuration.
Calculate average power from the actual operating duty cycle rather than the 0.3 µA Halt current alone. The MCU may consume substantially more current while executing code or operating its USART, SPI, I2C, timers, and comparators. Include regulator quiescent current and external load current in battery calculations, then verify each operating mode in hardware with the intended supply voltage and peripheral configuration.
Do not treat family-level pin compatibility as a guarantee that firmware transfers without modification. When moving among STM8L101, STM8L151, and STM8L152 devices, review memory size, startup files, peripheral registers, interrupt vectors, clock configuration, alternate-function mapping, and USB support. Preserve a device-specific hardware abstraction layer so peripheral and pin assignments can be adjusted without redesigning the application.
Informasi Konformitas
The order-specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations should be confirmed from current STMicroelectronics product documentation.