STMicroelectronics

STM8S105K6U6 - 16MHz 8-Bit MCU | STMicroelectronics

MPN: STM8S105K6U6 ✓ Aktif
2.95 V to 5.5 V Vdss 32-pin VFQFPN with exposed pad Package 16 MHz Speed 32 KB Memory
MOQ: 1 |

STM8S105K6U6 Genel Bakış

STMicroelectronics STM8S105K6U6 is an access-line 8-bit STM8 microcontroller with a 16 MHz clock, 32 KB of Flash program memory, integrated true data EEPROM, and a 32-pin VFQFPN package measuring 5 x 5 mm. It operates from 2.95 V to 5.5 V, providing a single device for both 3.3 V and 5 V systems. The MCU also provides a 10-bit ADC, 38 I/O ports, UART, SPI, and I2C interfaces.

An 8-bit microcontroller is a compact embedded-processing component that combines a CPU core, program memory, data memory, and peripherals on one integrated circuit. The STM8S105K4/6 access-line family belongs to the STM8S microcontroller portfolio and provides up to 32 Kbytes of Flash memory together with true data EEPROM. This combination supports small control systems that require flexible firmware updates, analog measurement, and serial communications without a separate external memory device.

The STM8S105K6U6's principal advantages include a 16 MHz operating clock, 32 KB of Flash program memory, 38 I/O ports, and operation across a 2.95 V to 5.5 V supply range. Its integrated 10-bit ADC enables analog sensor inputs to be processed directly, while UART, SPI, and I2C interfaces allow connection to displays, sensors, memory devices, and other embedded controllers. The 5 x 5 mm VFQFPN format supports compact PCB layouts where board area is constrained.

As an STM8S-family access-line device, the MCU combines an 8-bit CISC architecture with integrated serial and analog peripherals. The 32 KB Flash region provides room for application firmware and boot or configuration routines, while integrated true data EEPROM supports parameter storage and calibration data retention. Its 38 I/O ports give designers a substantial pin count for digital control, although the exact available functions depend on the device pin configuration and operating modes.

Typical uses include compact industrial controllers, temperature and environmental monitoring equipment, appliance control panels, digital sensor interfaces, communication modules, and compact embedded instruments. The combination of UART, SPI, and I2C makes it suitable for systems that must connect several peripheral classes while retaining a small package and a straightforward 8-bit programming model.

PCB design should preserve the exposed-pad thermal and electrical requirements of the VFQFPN package. Place input, output, and decoupling capacitors close to their associated pins, route sensitive analog inputs away from fast-switching nodes, and follow the manufacturer pin-definition and land-pattern guidance during layout. Confirm peripheral availability, alternate-function mappings, clock requirements, and reset behavior against the manufacturer datasheet before finalizing the design.

This product page combines the STM8S105K6U6 technical characteristics, package information, practical design guidance, and like-for-like alternatives. It helps engineers compare memory, voltage, interface, and package constraints while preserving the original 32-pin 5 x 5 mm footprint when evaluating a replacement.

Drop-in alternatifler için STM8S105K6U6 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller STM8S105K6U6 (aynı form faktörü ve ayağa oturma) — farklı olan Product Type, ADC Resolution, Serial Interfaces, Series, Package.

STMicroelectronics
Product Type: 8-bit microcontroller MCU
Serial Interfaces: UART, SPI, and I²C
Series: STM8S access line
İle Karşılaştır STM8S105K6U6 →
STMicroelectronics
Product Type: 8-bit microcontroller
ADC Resolution: 10 bit
Series: STM8S access line
İle Karşılaştır STM8S105K6U6 →

STM8S103K3U6

✅ Yerleştirme
STMicroelectronics
📦 32-pin VFQFPN
8-bit microcontroller MCU · STM8S access line · 16 MHz · 8 KB Flash · 1 KB · 640 bytes · 20 years at 55°C after 10 kcycles · 300 kcycles

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

STM8S105K4U6

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 32-pin VFQFPN
Flash memory is 16 KB versus 32 KB, an 8 KB or 25% reduction within the STM8S105x4/6 family

📋 Katalogda Olmayan Referans Alternatifi

STM8S105K6U6 Maksimum Değerlendirmeler & Elektriksel Özellikler

Product Type 8-bit access-line microcontroller
Series STM8S
Maximum CPU Clock 16 MHz
CPU Architecture 8-bit CISC
Flash Program Memory 32 KB
Integrated True Data EEPROM Yes
ADC Resolution 10-bit
Supply Voltage Range 2.95 V to 5.5 V
I/O Port Count 38
Serial Interfaces UART, SPI, and I2C
Timers Yes
Package Type 32-pin VFQFPN with exposed pad
Package Dimensions 5 mm x 5 mm
Montaj Türü Surface Mount
Shipping Package Tray
Yaşam Döngüsü Durumu Active

STM8S105K6U6 tray Pin Yapısı Kılavuzu

STM8S105K6U6 (tray paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.

tray paket pin çizelgesi için STM8S105K6U6

Ayrıntılı pin çıkış verisi mevcut değil: STM8S105K6U6.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

STM8S105K6U6 için uygundur 6 uygulamas: Industrial Sensor Controller, Environmental Monitoring Unit, Appliance Control Board, Communication Module, Digital Thermostat, Compact Test and Measurement Instrument.

🏭

Industrial Sensor Controller

The STM8S105K6U6 fits compact industrial sensor controllers that combine analog measurement with local configuration storage. Its 10-bit ADC can acquire sensor signals, while 38 I/O ports support digital inputs, alarm outputs, and status indicators. The 32 KB Flash region provides room for filtering, calibration, communications, and control firmware, and integrated true data EEPROM can retain configuration values. With a 2.95 V to 5.5 V supply range, the MCU accommodates 3.3 V and 5 V sensor ecosystems. Place analog traces away from switching circuitry and follow the manufacturer layout guidance to preserve measurement quality.

🧩

Environmental Monitoring Unit

The STM8S105K6U6 is appropriate for compact environmental monitors that periodically measure temperature, humidity, air quality, or light levels. The 10-bit ADC handles analog sensor outputs, while UART or I2C can connect remote sensing nodes and onboard display or data-logging hardware. Its 32 KB of Flash supports acquisition routines, threshold logic, event logging, and communication protocols without an external program-memory device. The 16 MHz clock provides useful processing headroom, and true data EEPROM can preserve calibration coefficients. Use short analog routes, local reference bypassing, and controlled grounding when the sensor signals are low level.

⚡

Appliance Control Board

The STM8S105K6U6 can serve as the central controller in a compact appliance or equipment subsystem where user interfaces, motors, relays, and sensors must be coordinated. Its 38 I/O ports offer extensive control connectivity, while the integrated ADC supports temperature, level, or potentiometer inputs. UART, SPI, and I2C permit use of local displays, memory modules, and digital sensors. The 32 KB Flash capacity is suitable for deterministic appliance state machines and service routines. Its 2.95 V to 5.5 V operating range simplifies design across common industrial and consumer supply rails while keeping the footprint compact.

🌐

Communication Module

The STM8S105K6U6 is a practical host controller for compact serial communication modules built around UART, SPI, or I2C. It can manage local configuration, protocol framing, status reporting, and user commands without relying on a larger processor. The 32 KB Flash memory accommodates protocol stacks and firmware updates, while integrated true data EEPROM supports network identifiers or calibration parameters. The 10-bit ADC can monitor supply, signal level, or an external sensor. A practical design should allocate pins and firmware around the selected peripheral, provide appropriate termination, and verify timing directly against the manufacturer datasheet.

📱

Digital Thermostat

The STM8S105K6U6 suits a digital thermostat that must read a temperature sensor, operate a display, and drive heating or cooling outputs. Its 10-bit ADC supports resistive, semiconductor, or other analog sensor inputs, while 38 I/O ports leave ample capacity for buttons, indicators, relay-control signals, and an external display interface. The 16 MHz processor supports responsive control-loop firmware, and 32 KB of Flash leaves room for scheduling, fault handling, and configuration. True data EEPROM can retain setpoints and calibration data across power cycles. Ensure the output-driver circuitry and thermal design are evaluated separately from the MCU.

🔧

Compact Test and Measurement Instrument

The STM8S105K6U6 can form the control core of a compact handheld or benchtop measurement instrument. The ADC supports basic analog measurements, while UART, SPI, and I2C can connect a display, external memory, sensors, or a host computer. Its 32 KB Flash capacity is suitable for measurement algorithms, calibration tables, and instrument firmware, and EEPROM can store persistent setup information. The 5 x 5 mm 32-pin VFQFPN package helps reduce board area in portable equipment. For accurate measurement, use the manufacturer's reference layout, isolate analog and digital return paths, and validate converter and front-end limitations with real signals.

What is the STM8S105K6U6?
The STM8S105K6U6 is a STMicroelectronics 8-bit STM8 access-line microcontroller with a 16 MHz clock, 32 KB of Flash memory, integrated true data EEPROM, and a 32-pin VFQFPN package. According to the manufacturer product page, the STM8S105x4/6 family is designed for compact embedded-control applications requiring programmable Flash memory, EEPROM, and integrated communications peripherals.
What are the key specifications of STM8S105K6U6 that engineers should know?
The STM8S105K6U6 combines a 16 MHz 8-bit core with 32 KB of Flash, a 10-bit ADC, 38 I/O ports, and UART, SPI, and I2C interfaces in a 5 x 5 mm VFQFPN package. Its 2.95 V to 5.5 V supply range supports 3.3 V and 5 V designs. The manufacturer product page identifies it as an STM8S105x4/6 access-line device with integrated true data EEPROM.
What is the operating voltage of STM8S105K6U6?
The STM8S105K6U6 operates from 2.95 V to 5.5 V. According to the STM8S105K6U6 technical listing, this range covers conventional 3.3 V and 5 V embedded systems. Designers should still verify individual peripheral operating limits, decoupling requirements, and timing margins in the manufacturer datasheet before finalizing a power-supply design.
How much Flash memory does STM8S105K6U6 have?
The STM8S105K6U6 contains 32 KB of Flash program memory. STMicroelectronics describes the STM8S105x4/6 access line as providing up to 32 Kbytes of Flash memory, and the exact STM8S105K6U6 listing identifies 32 KB. This capacity accommodates embedded application code, configuration logic, and firmware-update routines without requiring external program storage.
Which peripherals are integrated in STM8S105K6U6?
The STM8S105K6U6 integrates a 10-bit ADC, UART, SPI, I2C, timers, and 38 I/O ports. These peripherals support analog sensing, point-to-point serial links, sensor buses, and external memory or display connections. Pin-level alternate-function assignments should be confirmed in the manufacturer pin-description table because several interfaces can share port pins.
What package does STM8S105K6U6 use?
The STM8S105K6U6 uses a 32-pin VFQFPN package with an exposed pad and a 5 x 5 mm body size. According to the manufacturer product listing, this is a surface-mount package supplied in a tray. The exposed pad and land pattern must follow the package drawing because incorrect thermal-pad geometry can affect soldering, heat transfer, and assembly yield.
Where can I download the STM8S105K6U6 datasheet PDF?
The official STM8S105K6U6 datasheet and product resources are available from the STMicroelectronics product page at https://www.st.com/en/microcontrollers-microprocessors/stm8s105k6.html. Use the manufacturer's datasheet for the authoritative pin definitions, electrical characteristics, memory map, timing information, package drawing, and recommended operating conditions. The exposed-pad footprint and pin numbering should also be checked against that documentation.
Where can I find the STM8S105K6U6 pinout?
The STM8S105K6U6 pinout is published in the manufacturer datasheet and package information for the 32-pin VFQFPN device. The package has 32 numbered pins plus a central exposed pad. Use the pin-description table and package drawing to identify power, ground, reset, clock, analog, and alternate-function assignments before routing the PCB.
Where can I buy STM8S105K6U6 online?
Use the Request a Quote form on this XAIPART page to request STM8S105K6U6 availability, current lead time, and order details. The form is the appropriate route for obtaining a current sourcing response because stock and commercial terms can change without notice. Ask for the exact ordering code STM8S105K6U6 when submitting the request.
What is the price of STM8S105K6U6?
The current commercial terms for STM8S105K6U6 are handled through the Request a Quote form on this page. Submit the exact MPN and required quantity to receive current pricing, availability, and lead-time information. Request the manufacturer ordering code STM8S105K6U6 so that the quotation corresponds to the 32-pin VFQFPN device in tray packaging.
What is the lead time for STM8S105K6U6?
The current lead time for STM8S105K6U6 should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, packaging format, and manufacturing conditions, so an up-to-date supplier response is more useful than a generic estimate. Include the exact MPN, annual usage, and requested lot size when requesting the quotation.
Is STM8S105K6U6 in stock?
Current STM8S105K6U6 stock status should be checked through the Request a Quote form on this page. The form allows an engineer to request live availability for the exact 32-pin VFQFPN ordering code. Include the required quantity and delivery target so the response can distinguish production quantities from evaluation or prototype needs.
STM8S105K6U6 vs STM8S103K3U6 - which is better for a compact controller?
The STM8S105K6U6 is the better choice when the design needs more Flash memory than the STM8S103K3U6 provides. Both are STMicroelectronics STM8-family 8-bit devices associated with a compact 32-pin package format, but the STM8S105K6U6 has 32 KB of Flash while the STM8S103K3U6 is listed with 8 KB of Flash and 2 KB of RAM. Firmware size, peripheral requirements, and exact pin mapping must still be reviewed before replacement.
What is the difference between STM8S105K6U6 and STM8S105K4U6?
The STM8S105K6U6 provides 32 KB of Flash program memory, while the STM8S105K4U6 provides 16 KB. Both belong to the STM8S105x4/6 access-line family and therefore share the principal 8-bit architecture and 16 MHz operating class. Choose STM8S105K6U6 when firmware capacity is important; choose STM8S105K4U6 only after confirming that 16 KB is sufficient and the exact package pinout remains unchanged.
When should I choose STM8S105K6U6 over STM8S103K3U6?
Choose STM8S105K6U6 when firmware size, the 10-bit ADC feature set, or the broader STM8S105x4/6 access-line capability justifies the additional program memory. The STM8S105K6U6 includes 32 KB of Flash, while the STM8S103K3U6 comparison lists 8 KB of Flash and 2 KB of RAM. For a new 32-pin design, prioritize the complete peripheral set and pin map rather than choosing solely by clock speed.
What can replace STM8S105K6U6?
A replacement must preserve the 32-pin 5 x 5 mm footprint, supply range, clock requirements, memory capacity, peripheral functions, and software behavior. STM8S103K3U6 and STM8S105K4U6 are the closest same-brand options identified for comparison, but each has less Flash memory. No cross-brand part is presented as a drop-in replacement because direct pin and peripheral equivalence is not documented.
Is there an STM8S105K6U6 equivalent from another manufacturer?
No cross-brand drop-in equivalent is established for the STM8S105K6U6 in the available replacement information. A different manufacturer's 8-bit MCU may be functionally similar, but matching the 32-pin footprint is not enough: bootloader behavior, peripheral mapping, memory organization, interrupts, timers, and development-tool support must also align. Treat such devices as redesign candidates rather than drop-in replacements.
Is STM8S105K6U6 suitable for industrial and embedded-control applications?
The STM8S105K6U6 is suitable for compact embedded-control designs requiring a 16 MHz 8-bit MCU, 32 KB of Flash, EEPROM, analog measurement, and standard serial interfaces. STMicroelectronics describes the STM8S105x4/6 family as an access line, and the exact device is listed as active. For deployed industrial equipment, verify temperature limits, qualification requirements, and long-term availability against the manufacturer documentation.

Mühendislik referans verileri: STM8S105K6U6 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the STM8S105K6U6 for a new 32-pin embedded-control design that needs 32 KB of Flash, integrated true data EEPROM, a 10-bit ADC, 38 I/O ports, and operation from 2.95 V to 5.5 V. Its 16 MHz STM8 architecture is well suited to compact sensor controllers, appliance controls, communication modules, and basic measurement instruments. Select the STM8S105K4U6 when the same family architecture and footprint are needed but 16 KB of Flash is sufficient; this reduces memory capacity by 16 KB. Consider the STM8S103K3U6 only when its lower-cost positioning and 8 KB Flash budget are acceptable, since firmware size may require substantial changes. No cross-brand alternative should be treated as drop-in because an 8-bit MCU's pin mapping, bootloader, peripheral architecture, and software ecosystem must all match. In every case, verify the exact pin table, land pattern, electrical limits, and development-tool compatibility before releasing production files.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün STM8S103K3U6 STM8S105K4U6
Package 32-pin VFQFPN, 5 mm x 5 mm 32-pin UFQFPN 32-pin VFQFPN, 5 mm x 5 mm
Brand STMicroelectronics STMicroelectronics STMicroelectronics
Core Architecture 8-bit STM8 CISC 8-bit STM8 8-bit STM8
Maximum CPU Clock 16 MHz 16 MHz 16 MHz
Flash Program Memory 32 KB 8 KB 16 KB
Supply Voltage Range 2.95 V to 5.5 V 2.95 V to 5.5 V 2.95 V to 5.5 V
ADC Resolution 10-bit 10-bit 10-bit

Ana Farklılayıcılar

  • Larger Flash memory within the same access-line family (karşılaştırma:STM8S105K4U6)
  • More program capacity than the compact STM8S103 alternative (karşılaştırma:STM8S103K3U6)
  • Retains 16 MHz clock and 10-bit ADC in a compact 32-pin package (karşılaştırma:STM8S103K3U6)

Tasarım Notları

Follow the manufacturer land-pattern and exposed-pad requirements for the 32-pin 5 x 5 mm VFQFPN package. Place the decoupling capacitor adjacent to the supply and ground pins, keep the exposed-pad connection unobstructed, and match the recommended pad geometry to the PCB assembly process. Incorrect thermal-pad solder fill can reduce heat transfer and create assembly defects.

Route analog inputs away from UART, SPI, I2C, switching-power, and high-current output traces. Use a continuous ground reference where practical, place analog input components close to the MCU, and minimize loop area around sensitive nets. Because the ADC is 10-bit, stable references and careful grounding can be as important as the nominal clock speed when achieving repeatable measurements.

Do not assume software compatibility solely because two devices use the STM8 name and a similar package. Check the complete pin map, alternate-function assignments, clock tree, memory organization, bootloader procedure, interrupt vectors, timer channels, and peripheral electrical limits. The STM8S105K4U6 has 16 KB of Flash rather than 32 KB, so a replacement may require code-size review or a firmware revision.

Design the supply network for the full 2.95 V to 5.5 V operating range and account for startup and peripheral current at the selected clock. Use the manufacturer guidance for local bypass capacitance and pin connection. Do not rely on a 3.3 V or 5 V nominal label as proof of transient margin; verify brownout behavior, maximum supply, and power-sequencing requirements in the device documentation.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

Compliance status is not stated in the available manufacturer and distributor information and must be confirmed using the manufacturer product documentation.

Veri doğrulanma tarihi: 2026-11-10 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

STM8S105K6U6 datasheet STM8S105K6U6 pinout STM8S105K6U6 datasheet pdf STM8S105K6U6 equivalent STM8S105K6U6 replacement STM8S105K6U6 cross reference STM8S105K6U6 vs STM8S103K3U6 STM8S105K6U6 footprint STM8S105K6U6 price STM8S105K6U6 stock STMicroelectronics STM8S105K6U6 STM8S105K6U6 16MHz 32KB Flash STM8S105K6U6 VFQFPN application

İlgili Bileşenler ve Terimler

STMicroelectronics STM8S105K6U6 STM8S105K6 STM8S103K3U6 STM8S105K4U6 STM8S microcontroller 8-bit microcontroller embedded controller CISC architecture Flash program memory true data EEPROM 10-bit ADC UART SPI I2C VFQFPN-32 QFN package family surface-mount package 5 x 5 mm package 16 MHz clock 38 I/O ports 2.95 V to 5.5 V supply industrial sensor controller environmental monitoring
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle