STM8S105K6U6 - 16MHz 8-Bit MCU | STMicroelectronics
부품 번호: STM8S105K6U6 ✓ 활성STM8S105K6U6 개요
An 8-bit microcontroller is a compact embedded-processing component that combines a CPU core, program memory, data memory, and peripherals on one integrated circuit. The STM8S105K4/6 access-line family belongs to the STM8S microcontroller portfolio and provides up to 32 Kbytes of Flash memory together with true data EEPROM. This combination supports small control systems that require flexible firmware updates, analog measurement, and serial communications without a separate external memory device.
The STM8S105K6U6's principal advantages include a 16 MHz operating clock, 32 KB of Flash program memory, 38 I/O ports, and operation across a 2.95 V to 5.5 V supply range. Its integrated 10-bit ADC enables analog sensor inputs to be processed directly, while UART, SPI, and I2C interfaces allow connection to displays, sensors, memory devices, and other embedded controllers. The 5 x 5 mm VFQFPN format supports compact PCB layouts where board area is constrained.
As an STM8S-family access-line device, the MCU combines an 8-bit CISC architecture with integrated serial and analog peripherals. The 32 KB Flash region provides room for application firmware and boot or configuration routines, while integrated true data EEPROM supports parameter storage and calibration data retention. Its 38 I/O ports give designers a substantial pin count for digital control, although the exact available functions depend on the device pin configuration and operating modes.
Typical uses include compact industrial controllers, temperature and environmental monitoring equipment, appliance control panels, digital sensor interfaces, communication modules, and compact embedded instruments. The combination of UART, SPI, and I2C makes it suitable for systems that must connect several peripheral classes while retaining a small package and a straightforward 8-bit programming model.
PCB design should preserve the exposed-pad thermal and electrical requirements of the VFQFPN package. Place input, output, and decoupling capacitors close to their associated pins, route sensitive analog inputs away from fast-switching nodes, and follow the manufacturer pin-definition and land-pattern guidance during layout. Confirm peripheral availability, alternate-function mappings, clock requirements, and reset behavior against the manufacturer datasheet before finalizing the design.
This product page combines the STM8S105K6U6 technical characteristics, package information, practical design guidance, and like-for-like alternatives. It helps engineers compare memory, voltage, interface, and package constraints while preserving the original 32-pin 5 x 5 mm footprint when evaluating a replacement.
드롭인 대체품: STM8S105K6U6 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: STM8S105K6U6 (동일 폼 팩터 및 풋프린트) — 차이점: Product Type, ADC Resolution, Serial Interfaces, Series, Package.
STM8S103K3U6
✅ 드롭인가격 문의
데이터시트 보기 →STM8S105K4U6
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
STM8S105K6U6 최대 정격 & 전기적 특성
| Product Type | 8-bit access-line microcontroller |
| Series | STM8S |
| Maximum CPU Clock | 16 MHz |
| CPU Architecture | 8-bit CISC |
| Flash Program Memory | 32 KB |
| Integrated True Data EEPROM | Yes |
| ADC Resolution | 10-bit |
| Supply Voltage Range | 2.95 V to 5.5 V |
| I/O Port Count | 38 |
| Serial Interfaces | UART, SPI, and I2C |
| Timers | Yes |
| Package Type | 32-pin VFQFPN with exposed pad |
| Package Dimensions | 5 mm x 5 mm |
| 실장 유형 | Surface Mount |
| Shipping Package | Tray |
| 수명 주기 상태 | Active |
STM8S105K6U6 tray 핀 구성 가이드
STM8S105K6U6(tray 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: STM8S105K6U6.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
STM8S105K6U6 적합 용도: 6 애플리케이션s: Industrial Sensor Controller, Environmental Monitoring Unit, Appliance Control Board, Communication Module, Digital Thermostat, Compact Test and Measurement Instrument.
Industrial Sensor Controller
The STM8S105K6U6 fits compact industrial sensor controllers that combine analog measurement with local configuration storage. Its 10-bit ADC can acquire sensor signals, while 38 I/O ports support digital inputs, alarm outputs, and status indicators. The 32 KB Flash region provides room for filtering, calibration, communications, and control firmware, and integrated true data EEPROM can retain configuration values. With a 2.95 V to 5.5 V supply range, the MCU accommodates 3.3 V and 5 V sensor ecosystems. Place analog traces away from switching circuitry and follow the manufacturer layout guidance to preserve measurement quality.
Environmental Monitoring Unit
The STM8S105K6U6 is appropriate for compact environmental monitors that periodically measure temperature, humidity, air quality, or light levels. The 10-bit ADC handles analog sensor outputs, while UART or I2C can connect remote sensing nodes and onboard display or data-logging hardware. Its 32 KB of Flash supports acquisition routines, threshold logic, event logging, and communication protocols without an external program-memory device. The 16 MHz clock provides useful processing headroom, and true data EEPROM can preserve calibration coefficients. Use short analog routes, local reference bypassing, and controlled grounding when the sensor signals are low level.
Appliance Control Board
The STM8S105K6U6 can serve as the central controller in a compact appliance or equipment subsystem where user interfaces, motors, relays, and sensors must be coordinated. Its 38 I/O ports offer extensive control connectivity, while the integrated ADC supports temperature, level, or potentiometer inputs. UART, SPI, and I2C permit use of local displays, memory modules, and digital sensors. The 32 KB Flash capacity is suitable for deterministic appliance state machines and service routines. Its 2.95 V to 5.5 V operating range simplifies design across common industrial and consumer supply rails while keeping the footprint compact.
Communication Module
The STM8S105K6U6 is a practical host controller for compact serial communication modules built around UART, SPI, or I2C. It can manage local configuration, protocol framing, status reporting, and user commands without relying on a larger processor. The 32 KB Flash memory accommodates protocol stacks and firmware updates, while integrated true data EEPROM supports network identifiers or calibration parameters. The 10-bit ADC can monitor supply, signal level, or an external sensor. A practical design should allocate pins and firmware around the selected peripheral, provide appropriate termination, and verify timing directly against the manufacturer datasheet.
Digital Thermostat
The STM8S105K6U6 suits a digital thermostat that must read a temperature sensor, operate a display, and drive heating or cooling outputs. Its 10-bit ADC supports resistive, semiconductor, or other analog sensor inputs, while 38 I/O ports leave ample capacity for buttons, indicators, relay-control signals, and an external display interface. The 16 MHz processor supports responsive control-loop firmware, and 32 KB of Flash leaves room for scheduling, fault handling, and configuration. True data EEPROM can retain setpoints and calibration data across power cycles. Ensure the output-driver circuitry and thermal design are evaluated separately from the MCU.
Compact Test and Measurement Instrument
The STM8S105K6U6 can form the control core of a compact handheld or benchtop measurement instrument. The ADC supports basic analog measurements, while UART, SPI, and I2C can connect a display, external memory, sensors, or a host computer. Its 32 KB Flash capacity is suitable for measurement algorithms, calibration tables, and instrument firmware, and EEPROM can store persistent setup information. The 5 x 5 mm 32-pin VFQFPN package helps reduce board area in portable equipment. For accurate measurement, use the manufacturer's reference layout, isolate analog and digital return paths, and validate converter and front-end limitations with real signals.
엔지니어링 참조 데이터: STM8S105K6U6 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | STM8S103K3U6 | STM8S105K4U6 |
|---|---|---|---|
| Package | 32-pin VFQFPN, 5 mm x 5 mm | 32-pin UFQFPN | 32-pin VFQFPN, 5 mm x 5 mm |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Core Architecture | 8-bit STM8 CISC | 8-bit STM8 | 8-bit STM8 |
| Maximum CPU Clock | 16 MHz | 16 MHz | 16 MHz |
| Flash Program Memory | 32 KB | 8 KB | 16 KB |
| Supply Voltage Range | 2.95 V to 5.5 V | 2.95 V to 5.5 V | 2.95 V to 5.5 V |
| ADC Resolution | 10-bit | 10-bit | 10-bit |
주요 차별점
- Larger Flash memory within the same access-line family (vs STM8S105K4U6)
- More program capacity than the compact STM8S103 alternative (vs STM8S103K3U6)
- Retains 16 MHz clock and 10-bit ADC in a compact 32-pin package (vs STM8S103K3U6)
설계 노트
Follow the manufacturer land-pattern and exposed-pad requirements for the 32-pin 5 x 5 mm VFQFPN package. Place the decoupling capacitor adjacent to the supply and ground pins, keep the exposed-pad connection unobstructed, and match the recommended pad geometry to the PCB assembly process. Incorrect thermal-pad solder fill can reduce heat transfer and create assembly defects.
Route analog inputs away from UART, SPI, I2C, switching-power, and high-current output traces. Use a continuous ground reference where practical, place analog input components close to the MCU, and minimize loop area around sensitive nets. Because the ADC is 10-bit, stable references and careful grounding can be as important as the nominal clock speed when achieving repeatable measurements.
Do not assume software compatibility solely because two devices use the STM8 name and a similar package. Check the complete pin map, alternate-function assignments, clock tree, memory organization, bootloader procedure, interrupt vectors, timer channels, and peripheral electrical limits. The STM8S105K4U6 has 16 KB of Flash rather than 32 KB, so a replacement may require code-size review or a firmware revision.
Design the supply network for the full 2.95 V to 5.5 V operating range and account for startup and peripheral current at the selected clock. Use the manufacturer guidance for local bypass capacitance and pin connection. Do not rely on a 3.3 V or 5 V nominal label as proof of transient margin; verify brownout behavior, maximum supply, and power-sequencing requirements in the device documentation.
규정 준수 정보
Compliance status is not stated in the available manufacturer and distributor information and must be confirmed using the manufacturer product documentation.